lo0 not in ioctl( SIOCGIFCONF )
Hi, I was searching why ports/net/p5-Net-Interface was not working as expected and found some reasons. Most of them I can answer by implementing some test code as attached, but now I'm wondering why em0 is shown twice and lo0 is not included. The same situation on another machine .. --- BEGIN ifconfig -a (waldorf) em0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=19bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4 ether 00:15:17:10:84:6c inet 10.62.10.3 netmask 0xff00 broadcast 10.62.10.255 media: Ethernet autoselect (100baseTX full-duplex) status: active em1: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500 options=19bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4 ether 00:15:17:10:84:6d media: Ethernet autoselect status: no carrier lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 --- END ifconfig -a (waldorf) ./netif em0 em0 em1 --- BEGIN ifconfig -a (STINGRAY) ifconfig -a fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:a0:c9:ce:c8:64 inet 10.62.10.12 netmask 0xff00 broadcast 10.62.10.255 media: Ethernet autoselect (100baseTX full-duplex) status: active fxp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:a0:c9:ce:db:83 media: Ethernet autoselect (100baseTX full-duplex) status: active pflog0: flags=141UP,RUNNING,PROMISC metric 0 mtu 33204 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 vlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:a0:c9:ce:db:83 media: Ethernet autoselect (100baseTX full-duplex) status: active vlan: 7 parent interface: fxp1 tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST metric 0 mtu 1492 inet 87.149.231.190 -- 217.0.119.167 netmask 0x Opened by PID 27503 --- END ifconfig -a (STINGRAY) ./netif32 fxp0 fxp0 fxp1 Why aren't lo0, vlan0 and tun0 not included? What can I do to get these entries (portable way, please). Best regards, Jens ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
lo0 not in ioctl( SIOCGIFCONF )
Hi (resend because attachment forgotten ...), I was searching why ports/net/p5-Net-Interface was not working as expected and found some reasons. Most of them I can answer by implementing some test code as attached, but now I'm wondering why em0 is shown twice and lo0 is not included. The same situation on another machine .. --- BEGIN ifconfig -a (waldorf) em0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=19bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4 ether 00:15:17:10:84:6c inet 10.62.10.3 netmask 0xff00 broadcast 10.62.10.255 media: Ethernet autoselect (100baseTX full-duplex) status: active em1: flags=8802BROADCAST,SIMPLEX,MULTICAST metric 0 mtu 1500 options=19bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4 ether 00:15:17:10:84:6d media: Ethernet autoselect status: no carrier lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 --- END ifconfig -a (waldorf) ./netif em0 em0 em1 --- BEGIN ifconfig -a (STINGRAY) ifconfig -a fxp0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:a0:c9:ce:c8:64 inet 10.62.10.12 netmask 0xff00 broadcast 10.62.10.255 media: Ethernet autoselect (100baseTX full-duplex) status: active fxp1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 options=8VLAN_MTU ether 00:a0:c9:ce:db:83 media: Ethernet autoselect (100baseTX full-duplex) status: active pflog0: flags=141UP,RUNNING,PROMISC metric 0 mtu 33204 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST metric 0 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff00 vlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500 ether 00:a0:c9:ce:db:83 media: Ethernet autoselect (100baseTX full-duplex) status: active vlan: 7 parent interface: fxp1 tun0: flags=8051UP,POINTOPOINT,RUNNING,MULTICAST metric 0 mtu 1492 inet 87.149.231.190 -- 217.0.119.167 netmask 0x Opened by PID 27503 --- END ifconfig -a (STINGRAY) ./netif32 fxp0 fxp0 fxp1 Why aren't lo0, vlan0 and tun0 not included? What can I do to get these entries (portable way, please). Best regards, Jens ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
