Re: setting up pppoe
On Tuesday 09 May 2006 04:05, Michael P. Soulier wrote: > > This is also surprising > > [EMAIL PROTECTED] ~]$ man ppp.conf > No manual entry for ppp.conf > > Seems to be in ppp(8) though. > and here /usr/share/examples/ppp > I'm just looking to use a PPPoE connection with my ISP. this or mpd from ports/net/mpd > > Thanks, > Mike ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: setting up pppoe
On 09/05/06 Joerg Pernfuss said: > ppp needs some address to work with right from the beginning, before > you get assigned an IP address from your isp. The original idea was, > from my understanding, that you could specify your network, and would > then only be assigned the host part of the address. > > Hence the /0, which specifies that nothing is network-part and you > take whatever IP address you get assigned. Well, if it works, it'll be one of the simplest pppoe setups I've seen yet on a *nix box. Looks pretty simple. Mike -- Michael P. Soulier <[EMAIL PROTECTED]> "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." --Albert Einstein pgpa8a1rcU0Vc.pgp Description: PGP signature
Re: setting up pppoe
On Mon, 8 May 2006 21:05:02 -0400 "Michael P. Soulier" <[EMAIL PROTECTED]> wrote: > People, > > I found this section in the handbook > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoe.html > > and it mentions a ppp.conf file like so > > default: > set log Phase tun command # you can add more detailed logging if > you wish set ifaddr 10.0.0.1/0 10.0.0.2/0 ppp needs some address to work with right from the beginning, before you get assigned an IP address from your isp. The original idea was, from my understanding, that you could specify your network, and would then only be assigned the host part of the address. Hence the /0, which specifies that nothing is network-part and you take whatever IP address you get assigned. Joerg -- | /"\ ASCII ribbon | GnuPG Key ID | e86d b753 3deb e749 6c3a | | \ / campaign against |0xbbcaad24 | 5706 1f7d 6cfd bbca ad24 | | XHTML in email |.the next sentence is true. | | / \ and news | .the previous sentence was a lie.| signature.asc Description: PGP signature
setting up pppoe
People, I found this section in the handbook http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/pppoe.html and it mentions a ppp.conf file like so default: set log Phase tun command # you can add more detailed logging if you wish set ifaddr 10.0.0.1/0 10.0.0.2/0 name_of_service_provider: set device PPPoE:xl1 # replace xl1 with your Ethernet device set authname YOURLOGINNAME set authkey YOURPASSWORD set dial set login add default HISADDR I'm confused. Why would I set an ifaddr when it's a PPPoE connection? I don't know what IP I'm going to be assigned yet. What is ifaddr for? This is also surprising [EMAIL PROTECTED] ~]$ man ppp.conf No manual entry for ppp.conf Seems to be in ppp(8) though. I'm just looking to use a PPPoE connection with my ISP. Thanks, Mike -- Michael P. Soulier <[EMAIL PROTECTED]> "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." --Albert Einstein pgpseV9debRJy.pgp Description: PGP signature
Re: Problem setting up PPPoE in Release 6.0
Barbara La-Scala wrote: I have a Netcomm NB1300 modem and a Realtek 8029 ethernet card and was successful at configuring PPPoE for this combination under R5.3. I've recently upgraded to R6.0 and cannot get things to work any more. I've played with all the options in the ppp.conf that looked relevant (and several that didn't) and I've compiled the NETGRAPH stuff into my kernel but still no go. I've googled but without success. I've tripled checked that I've got my username and password entered correctly. I know the modem is OK as I'm using it to post this (hooked up to a laptop with Windoze). I'm reluctant to return to R5.3 as I'm enjoying having a working sound card. However, I need internet access more. Any help would be greatly appreciated as I'm all out of ideas. Configuration details are below. Thanks Barbara I have a similar setup: FreeBSD 6, Netcomm NB1300 Plus 4, Netspace. Occasionally it fails to connect while waiting for carrier, as yours seems to have done. If I try to connect again, it usually succeeds. I would suggest making a second attempt to connect, if that fails, power cycle the modem and try again. If it still won't connect, then there might be a bigger problem. I also have option "set cd 10" in my ppp.conf that sets a 10 second delay waiting for carrier (FreeBSD checks for carrier once per second until timeout) - I don't know if that makes any difference. Rowdy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Problem setting up PPPoE in Release 6.0
I have a Netcomm NB1300 modem and a Realtek 8029 ethernet card and was successful at configuring PPPoE for this combination under R5.3. I've recently upgraded to R6.0 and cannot get things to work any more. I've played with all the options in the ppp.conf that looked relevant (and several that didn't) and I've compiled the NETGRAPH stuff into my kernel but still no go. I've googled but without success. I've tripled checked that I've got my username and password entered correctly. I know the modem is OK as I'm using it to post this (hooked up to a laptop with Windoze). I'm reluctant to return to R5.3 as I'm enjoying having a working sound card. However, I need internet access more. Any help would be greatly appreciated as I'm all out of ideas. Configuration details are below. Thanks Barbara FreeBSD reports my Ethernet card is ed0: port 0xd000-0xd01f irq 12 at device 9.0 on pci0 ed0: type NE2000 (16 bit) My /etc/rc.conf looks like ifconfig_ed0="up" ppp_enable="YES" ppp_mode="ddial" ppp_profile="netspace" My /etc/ppp/ppp.conf (with password deleted) is default: set log All netspace: set device PPPoE:ed0 set authname [EMAIL PROTECTED] set authkey set dial set login set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR The ppp.log file reports Phase: Using interface: tun0 Phase: deflink: Created in closed state tun0: ID0: 0x282e62c0 = fopen("/etc/ppp/ppp.conf", "r") tun0: Debug: ReadSystem: Checking netspace (/etc/ppp/ppp.conf). tun0: Command: netspace: set device PPPoE:ed0 tun0: Command: netspace: set authname [EMAIL PROTECTED] tun0: Command: netspace: set authkey tun0: Command: netspace: set dial tun0: Command: netspace: set login tun0: Command: netspace: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 tun0: Command: netspace: add default HISADDR tun0: ID0: 9 = socket(17, 3, 0) tun0: ID0: -1 = write(9, data, 140) tun0: TCP/IP: rt_Set failure: tun0: TCP/IP: rt_Set: Cmd = Add tun0: TCP/IP: rt_Set: Dst = 0.0.0.0/0 tun0: TCP/IP: rt_Set: Gateway = 10.0.0.2 tun0: Debug: wrote -1: cmd = Add, dst = 0.0.0.0/0, gateway = 10.0.0.2 tun0: ID0: 0x282e62c0 = fopen("/var/run/tun0.pid", "w") tun0: Phase: PPP Started (ddial mode). tun0: Phase: bundle: Establish tun0: Phase: deflink: closed -> opening tun0: ID0: 0 = NgMkSockNode("", &cs, &ds) tun0: Debug: List of netgraph node ``ed0:'' (id 1) hooks: tun0: Debug: Found orphans -> ethernet tun0: Debug: Connecting netgraph socket .:tun0 -> [3]::tun0 tun0: ID0: 2 = socket(2, 2, 0) tun0: ID0: 0 = ioctl(2, 3223349521, 0xbfbfde10) tun0: ID0: 0 = ioctl(2, 2149607696, 0xbfbfde10) tun0: Debug: Sending PPPOE_CONNECT to .:tun0 tun0: Debug: Found the following interfaces: tun0: Debug: Index 1, name "ed0" tun0: Debug: Index 2, name "plip0" tun0: Debug: Index 3, name "lo0" tun0: Debug: Index 4, name "tun0" tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Phase: deflink: Connected! tun0: Phase: deflink: opening -> dial tun0: Phase: deflink: dial -> carrier tun0: Debug: Waiting for carrier tun0: Timer: Select returns -1 tun0: Timer: Begin of Timer Service List--- tun0: Timer: physical throughput timer[0x80bc068]: freq = 1.00s, next = 0.00s, state = running tun0: Timer: End of Timer Service List --- tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Debug: Waiting for carrier tun0: Timer: Select returns -1 tun0: Timer: Begin of Timer Service List--- tun0: Timer: physical throughput timer[0x80bc068]: freq = 1.00s, next = 0.00s, state = running tun0: Timer: End of Timer Service List --- tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Debug: Waiting for carrier tun0: Timer: Select returns -1 tun0: Timer: Begin of Timer Service List--- tun0: Timer: physical throughput timer[0x80bc068]: freq = 1.00s, next = 0.00s, state = running tun0: Timer: End of Timer Service List --- tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Debug: Waiting for carrier tun0: Timer: Select returns -1 tun0: Timer: Begin of Timer Service List--- tun0: Timer: physical throughput timer[0x80bc068]: freq = 1.00s, next = 0.00s, state = running tun0: Timer: End of Timer Service List --- tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Debug: Waiting for carrier tun0: Timer: Select returns -1 tun0: Timer: Begin of Timer Service List--- tun0: Timer: physical throughput timer[0x80bc068]: freq = 1.00s, next = 0.00s, state = running tun0: Timer: End of Timer Service List --- tun0: Timer: timer_Start: Inserting physical throughput timer[0x80bc068] tun0: Phase: deflink: Disconnected! tun0: Phase: deflink: carrier -> hangup tun0: Debug: deflink: Close tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out tun0: Phase: defli