Re: GELI versus GBDE?
Anyway, the other reasons that GBDE suck are: 1) Lots of annoying ENOMEM messages, since the memory allocation calls gbde makes are somewhat specific as I understand. One can ignore those messages. 2) GELI provides a onetime key feature, which makes it incredibly convenient for swap and /tmp encryption. 3) The secret key in GELI can be split between the keyfile and the passphrase. The only inconvenience I had with GELI is that if one wants to read a passphrase in a script once and then open a bunch of volumes, than one has to use "expect" to feed the passphrase to geli. It requires the terminal input and won't accept the stdin. GBDE does not have such issue. P.S. One can actually have both in kernel. Christian Brueffer said the following on 16.04.2007 11:21: On Sun, Apr 15, 2007 at 08:56:07AM -0500, Nikolay Mirin wrote: Definitely GELI. GBDE will become obsolete very soon as some other things like vinum and such. It was there just as a test of concept as I understand. Many those different disk subsystems are incompatible in fact, the case of GBDE and Vinum is mentioned as an example in the handbook. Read more about GEOM, as this system will unite all possible disk techniqies. Also, GELI takes advantage of crypto-hardware, but I believe that one gets a benefit out of it only if the main CPU is very slow. There are currently no plans to remove GBDE. The problems with Vinum you mention stemmed from the fact, that the original Vinum was not GEOM aware, thus, GELI couldn't have been used with it as well. gvinum has been in existance for some time now and it's fully compatible to both GBDE and GELI. - Christian ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: GELI versus GBDE?
On Sun, Apr 15, 2007 at 08:56:07AM -0500, Nikolay Mirin wrote: > Definitely GELI. > > GBDE will become obsolete very soon as some other things like vinum and > such. It was there just as a test of concept as I understand. > Many those different disk subsystems are incompatible in fact, the case > of GBDE and Vinum is mentioned as an example in the handbook. > Read more about GEOM, as this system will unite all possible disk > techniqies. > > Also, GELI takes advantage of crypto-hardware, but I believe that one > gets a benefit out of it only if the main CPU is very slow. > There are currently no plans to remove GBDE. The problems with Vinum you mention stemmed from the fact, that the original Vinum was not GEOM aware, thus, GELI couldn't have been used with it as well. gvinum has been in existance for some time now and it's fully compatible to both GBDE and GELI. - Christian -- Christian Brueffer [EMAIL PROTECTED] [EMAIL PROTECTED] GPG Key: http://people.freebsd.org/~brueffer/brueffer.key.asc GPG Fingerprint: A5C8 2099 19FF AACA F41B B29B 6C76 178C A0ED 982D pgpx42UbfCXhu.pgp Description: PGP signature
Re: OpenBSD spamd port update coming?
On 4/16/07, Charles Sprickman <[EMAIL PROTECTED]> wrote: On Mon, 16 Apr 2007, Jonathan Stewart wrote: > Does anyone know of any work towards updating the spamd port to the latest > version? The makefile shows version 3.7 and OpenBSD is up to 4.1 now. I'm > looking at setting it up so helping test would not be a problem for me. There's an "unofficial" port floating around out there that I'm using. I don't have the URL handy, but I think it's a 3.9 version. It's new enough to support the auto-whitelisting functions in spamlogd. I don't recall what the reason was, but apparently the patches were rejected or perhaps there just isn't an active maintainer anymore. It does work well though... Looks like there is a 4.1 version floating around: http://developer.berlios.de/projects/freebsdspamd/ Please note that I have not tested this personally. Scott ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Possible mtu bug in vlan or bce
Tom Judge wrote this message on Mon, Apr 16, 2007 at 18:21 +0100: > I have seen some strange behaviour today with VLAN interfaces on bce > interfaces. I am running 6.2 Release on i386. > > I have a bce interface setup on a gig-e network with an MTU of 8192 i > attach a vlan interface to this and chnage the vlan if mtu to 1500 as it > has 100Mbit devices on it. This does not seem to affect the MTU of the > bce interface, the VLAN mtu is reported as changed by if config but the > bce is not reported as changed. However I then start to get error > messages saying that the NFS server is not responding as it is sending > packets larger than 1500 bytes. > > > If I try to raise the mtu of the vlan interface (to 8192 which is the > value that ifconfig reports for bce0) at this stage ifconfig thows an > error saying that the value is incorrect. If I then 'raise' (it already > appears to be set to 8192 according to ifconfig) the mtu of bce0 to 8192 > and then set the vlan interface mtu to 8192 the nfs server starts to > work again. Make sure that you change the host route's mtu down to the new MTU... I changed the MTU behavior a while back so that you could have a mixed network and support both large and regular sized MTU's on the same nextwork... # ifconfig em0 em0: flags=8843 mtu 9000 options=18b inet6 fe80::207:e9ff:fe0d:ad06%em0 prefixlen 64 scopeid 0x2 inet 192.168.0.21 netmask 0xff00 broadcast 192.168.0.255 ether 00:07:e9:0d:ad:06 media: Ethernet autoselect (1000baseTX ) status: active # netstat -rnWfinet Routing tables Internet: DestinationGatewayFlagsRefs UseMtuNetif Expire default192.168.0.14 UGS 0 8024 1500 em0 [...] 192.168.0.18 00:c0:f0:42:23:87 UHLW12 1500 em0 1193 # route change 192.168.0.18 -mtu 9000 change host 192.168.0.18 # netstat -rnWfinet Routing tables Internet: DestinationGatewayFlagsRefs UseMtuNetif Expire [...] 192.168.0.18 00:c0:f0:42:23:87 UHLW12 9000 em0 1172 # ifconfig em0 mtu 1500 # ifconfig em0 em0: flags=8843 mtu 1500 options=18b inet6 fe80::207:e9ff:fe0d:ad06%em0 prefixlen 64 scopeid 0x2 inet 192.168.0.21 netmask 0xff00 broadcast 192.168.0.255 ether 00:07:e9:0d:ad:06 media: Ethernet autoselect (1000baseTX ) status: active # netstat -rnWfinet Routing tables Internet: DestinationGatewayFlagsRefs UseMtuNetif Expire [..] 192.168.0.18 00:c0:f0:42:23:87 UHLW12 9000 em0 1128 Hmmm... We may want to add code that detects when the host route's MTU is larger than the interface, and prevent that from happening. Though if an mtu daemon ever gets written, then that should take care of it. -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not." ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Clamav 0.90.1
On Tue, 17 Apr 2007 06:21:21 +1000 "Dimuthu Parussalla" <[EMAIL PROTECTED]> wrote: > Hi All, > > > Anyone tried new clamav version (Clamav 0.90.2) with 6.2 stable?. > Also any success using Clamav 0.90.1 without clamd.conf on 6.2?. > Does it still need lipthread mapping? > > Cheers > Dim Ok for me, compiled from source with 6.2 from Feb 11th. -Adrian ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: OpenBSD spamd port update coming?
On Mon, 16 Apr 2007, Jonathan Stewart wrote: Does anyone know of any work towards updating the spamd port to the latest version? The makefile shows version 3.7 and OpenBSD is up to 4.1 now. I'm looking at setting it up so helping test would not be a problem for me. There's an "unofficial" port floating around out there that I'm using. I don't have the URL handy, but I think it's a 3.9 version. It's new enough to support the auto-whitelisting functions in spamlogd. I don't recall what the reason was, but apparently the patches were rejected or perhaps there just isn't an active maintainer anymore. It does work well though... Charles Jonathan ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: OpenBSD spamd port update coming?
I'm currently running that testing port of openbsd spamd 4.0 with spamlogd included and grey tarpitting included. I workes great on my two MXs. I am not sure why it wasn't committed. regards, -Dennis Jonathan Stewart schrieb: Does anyone know of any work towards updating the spamd port to the latest version? The makefile shows version 3.7 and OpenBSD is up to 4.1 now. I'm looking at setting it up so helping test would not be a problem for me. Jonathan ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Dennis Berger BSDSystems Eduardstrasse 43b 20257 Hamburg Phone: +49 (0)40 54 00 18 17 Mobile: +49 (0) 179 123 15 09 E-Mail: [EMAIL PROTECTED] ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
OpenBSD spamd port update coming?
Does anyone know of any work towards updating the spamd port to the latest version? The makefile shows version 3.7 and OpenBSD is up to 4.1 now. I'm looking at setting it up so helping test would not be a problem for me. Jonathan ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Clamav 0.90.1
At 04:21 PM 4/16/2007, Dimuthu Parussalla wrote: Anyone tried new clamav version (Clamav 0.90.2) with 6.2 stable?. Also any success using Clamav 0.90.1 without clamd.conf on 6.2?. Does it still need lipthread mapping? Hi, I am using .90.2 and have the lipthread mapping still. Not sure if its needed or not, but its been running fine since Saturday. Also, the box is RELENG_6, updated Saturday morning. Remember, if you update to get the new sendmail in RELENG_6, make sure you recompile all your milters. ---Mike ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Clamav 0.90.1
Hi All, Anyone tried new clamav version (Clamav 0.90.2) with 6.2 stable?. Also any success using Clamav 0.90.1 without clamd.conf on 6.2?. Does it still need lipthread mapping? Cheers Dim ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Possible mtu bug in vlan or bce
Hi, I have seen some strange behaviour today with VLAN interfaces on bce interfaces. I am running 6.2 Release on i386. I have a bce interface setup on a gig-e network with an MTU of 8192 i attach a vlan interface to this and chnage the vlan if mtu to 1500 as it has 100Mbit devices on it. This does not seem to affect the MTU of the bce interface, the VLAN mtu is reported as changed by if config but the bce is not reported as changed. However I then start to get error messages saying that the NFS server is not responding as it is sending packets larger than 1500 bytes. If I try to raise the mtu of the vlan interface (to 8192 which is the value that ifconfig reports for bce0) at this stage ifconfig thows an error saying that the value is incorrect. If I then 'raise' (it already appears to be set to 8192 according to ifconfig) the mtu of bce0 to 8192 and then set the vlan interface mtu to 8192 the nfs server starts to work again. Is this a know bug/problem or should I raise a PR? Thanks Tom ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Psoriasis - the most dangerous illness of 21 century!
Visit our site, we have advises about Psoriasis, Forum for russianspeaking patients. http://psor.cod.ee/ This is not a Spam. We take your email adress from open source! ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Dosaq Noticias -
Caso não consiga visualizar as imagens, favor click na bar= ra acima deste texto de cor cinza para liberar as imagens. Caros clientes e amigos da Dosaq, estamos disponibi= lizando a apresentação de nossa empresa e produtos. Agradecemos desde já= pela atenção, e estamos a sua total disposição para futuros esclarecimentos. Att. MarcelCabral Sup. Vendas 011-69466642 = Acesse nosso site [1]www.dosaq.com.br [EMAIL PROTECTED] Dosaq - = Bombas Dosadoras Rua Imoroti 113 - S.João Clímaco.-Sp. 3D"" [news.gif"] [projetos_p.jpg=] Renascimento d= o Projeto Billings Peço licença para chamar a a= tenção das autoridades do Estado de São Paulo, dos colegas eng= enheiros, dos ambientalistas e da população que temos que f= echar urgentemente as comportas da entrada do túnel nº = 7 da represa de Joanópolis do Sistema Cantareira. [3][vejamais.gif"] <= /TR> ... .. [dicas.gif"] Devido ao grande volume de manuten= ção dos equipamentos, realizada no final do ano, solicitada por nos= sos clientes, nosso estoque de peças de reposição fica li= mitado, sugerimos que façam a reposição de peças do Kit pre= ventivo de manutenção. ... .. [sugestao.gif"] Sugerimos aos nossos clientes = que mantenham em seu almoxarifado um Kit preventivo para manutenção:&= nbsp; 2 bico de recalque 2 bico de sucção&n= bsp; 2 diafragma 2 válvulas de retenção 2 vá= lvula pé de crivo [maquinas2.gif"] Faç= a seu orçamento on-line! [4][form.gif"] DOSAQ E-mailing é um serviço = gratuito da Dosa= q - Indústria e comércio de bombas Ltda. Caso voc= ê não queira continuar recebendo, responda este e-mail com a palavra EXCLUIR. um produto [5]Net ABC Internet References Visible links 1. 3D"http://www.dosaq.com.br/"; 2. 3D"mailto:[EMAIL PROTECTED]" 3. 3D"http://www.uniagua.org.br/website/default.asp 4. 3D"http://www.dosaq.com.br/compra.asp"; 5. 3D"http://www.netabc.com.br/index.asp Hidden links: 6. 3D"http://www.uniagua.org.br/website/default.asp"; 7. 3D"http://www.uniagua.org.br/website/default.asp___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: freebsd-stable Digest, Vol 202, Issue 1
Greettings - As of February 20, 2007, I will no longer be working with the SUHSD. Is has been of great pleasure to have worked with you. Very truly yours, -Stu ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
הלקוחות שלך מחפשים אותך
הלקוחות שלך מחפשים אותך בגוגל,= איפה אתה ? בעל עסק, רוצה לקדם את העסק שלך= במנוע החיפוש הגדול בעולם ? השאר פרטים ומייד חוזרים ! (ללא= כל התחייבות) שם מלא: ___ טלפון: ___ נייד: ___ עיר:___ תחום עיסוק: ___<= /td> אל תיתן למת= חרים לעקוף אותך בחיפוש ! [1]להסר= ה מרשימת הדיור References 1. 3D"mailto:/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Straordinaria Offerta
Se non visualizzi correttamente la newsletter [1]clicca qui DESIGN&SOFTWARE srl Viale Italia 8310 Avellino Tel.: 0825.1910083 Fax: 0825.1910084 Newsletter del 14/04/2007 @CAD2007 @CAD2007 e' il CAD con le medesime funzionalita' di AutoCad LT A soli 99 euro + sp.spedizione + iva Se acquisti 2 Licenze la terza e' in omaggio e puoi intestarle a chi vuoi! @CAD diventa "portatile".Infatti,incluso nel prezzo vi e' PenCAD,il pen drive da 1 GB sul quale e' gia' installato @CAD. Grazie a PenCAD,@CAD e' sempre con te,a casa,in ufficio,in cantiere o in azienda e lo utilizzi senza alcuna installazione. Assistenza ed aggiornamento fino al 31-12-2007. Nessun obbligo di rinnovo contratto di assistenza. La LICENZA E' ILLIMITATA!!! [2][icon_32x32_download.gif] Download demo [3][icon_32x32_purchase.gif] Acquista L'offerta scade il 20 Aprile 2007 [EMAIL PROTECTED] [AMER6F.jpg] PENCAD : @CAD DIVENTA "PORTATILE" INCLUSO NEL PREZZO ANCHE PENCAD,LA VERSIONE DI @CAD SU PENDRIVE. PENCAD e' il cad che ti segue ovunque tu sia, basta collegarlo a qualsiasi PC e lanci @CAD2007 da Pendrive, senza alcuna installazione. Comodo vero? PENNA USB DA 1 GB INCLUSA NEL PREZZO CON @CAD 2007 GIA' INSTALLATO SCONTI SU MULTILICENZE Acquistando 2 Licenze,la terza e' in omaggio. Le licenze possono essere anche intestate a soggetti differenti. Esempi di importi in funzione del numero di licenze N° totale lic. N.lic. da pagare N.Lic. gratis Importo Spese sped. Totale (iva incl) 1 1 0 99,00 13,00 134,40 3 2 1 198,00 13,00 253,20 4 3 1 297,00 13,00 372,00 6 4 2 396,00 13,00 490,80 NOVITA' @CAD 2007.5 Importazione esportazione di file dxf e dwg fino alla vers. Autocad 2007 - Esportazione nei formati PDF e DWF Gestione ordine di visualizzazione entita' - Gestione avanzata Imma-gini raster - Trasparenza, Opacita' e Clipping - Retini fotorealistici - Ampia libreria di blocchi, suddivisi per categorie - LiveUpdate : utility per scaricare gli aggiornamenti direttamente dall'ambiente di @CAD SCHEDA PRODOTTO 1. Primitive grafiche : Linea, Punto, Cerchio, Arco,Testo, Poligono, Polilinea, Riempimento 2. Raggruppamento di entita' elementari in Blocchi 3. Zoom Finestra,Avanti,Indietro,Pan 4. Modifiche di entita' copia, muovi, ruota, Offset etc.) 5. Infiniti livelli di Undo/Redo 6. Stampa in qualsiasi formato,potendo associare al colore a video,lo spessore su carta e gestione Stili di stampa (Files .CTB e STB) 7. Layers 8. Diversi sistemi di quotatura 9. Tutti i tipi di linea (.lin) ed i riempimenti vettoriali (.pat) CONSEGNA PRODOTTO Consegna entro gg 10 dall'avvenuto pagamento,con CORRIERE GLS-EXECUTIVE. CONFEZIONE : SCATOLA, CD, MANUALE in ITALIANO e PENDRIVE DA 1 Gb [4]MODALITA' DI PAGAMENTO PER ACQUISTARE Cliccare su [5]Acquista e compilare il modulo in ogni richiesta.Cio' costi-tuisce solo una prenotazione del prodotto.Per perfezionare l'ordine eseguire il pagamento,ed inviarne copia al n° 0825.1910084 [6]Acquista Design&Software srl - Viale Italia 40 - 83100 Avellino - Email.: [EMAIL PROTECTED] References Visible links 1. http://www.atcad.net/news14042007.htm 2. http://www.atcad.net/[EMAIL PROTECTED] 3. http://www.atcad.net/acquista.html 4. javascript:window.open('http://www.atcad.net/modpag.html','','width=640,height=480,scrollbars=no,left=20,screenX=20');window.close.self 5. http://www.atcad.net/acquista.html 6. http://www.atcad.net/acquista.html Hidden links: 7. http://www.atcad.net/news140407.htm ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Technology Industry Moves To Video
Greetings! Are you happy with your results from the Southern California Linux Expo 2007? Did you have what it takes to make the difference between creating excitement and blending in with the competition, between lots of hot leads and a few hard sells ... between success and failure? Did you have video? Why video? Video vividly demonstrates the features and benefits of your products. Video captures the praises of your most enthusiastic customers. Video instills interest, reaction and trust. Video sells. In just 45 days, PixelFish creates marketing videos that become an integral part of your marketing and sales efforts when it streams from your Web site, launches from multimedia email newsletters, plays from CD video brochures and loops from a DVD at your tradeshow booth. We are PixelFish. We deliver The Evolution of Video. And we guarantee results. Click on the videos to the right to see samples of our work. Contact us today for a free evaluation of your video marketing needs. Tammie Cheek PixelFish, Inc. 800.503.3020 x7110 mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED] http://www.pixelfish.com";>http://www.pixelfish.com http://stream01.pixelfish.com/interim/meter_vm.php";>Interim Video http://stream01.pixelfish.com/empire_stat/meter_vm.php";>Empire Stat Group Video http://stream01.pixelfish.com/cha/meter_vm.php";>Columbia Healthcare Analytics Video Unsubscribe to safely remove yourself from this email list, please send email to [EMAIL PROTECTED] Powered by Pixelfish http://www.pixelfish.com ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Technology Industry Moves To Video
Greetings! Are you happy with your results from the Southern California Linux Expo 2007? Did you have what it takes to make the difference between creating excitement and blending in with the competition, between lots of hot leads and a few hard sells ... between success and failure? Did you have video? Why video? Video vividly demonstrates the features and benefits of your products. Video captures the praises of your most enthusiastic customers. Video instills interest, reaction and trust. Video sells. In just 45 days, PixelFish creates marketing videos that become an integral part of your marketing and sales efforts when it streams from your Web site, launches from multimedia email newsletters, plays from CD video brochures and loops from a DVD at your tradeshow booth. We are PixelFish. We deliver The Evolution of Video. And we guarantee results. Click on the videos to the right to see samples of our work. Contact us today for a free evaluation of your video marketing needs. Tammie Cheek PixelFish, Inc. 800.503.3020 x7110 mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED] http://www.pixelfish.com";>http://www.pixelfish.com http://stream01.pixelfish.com/interim/meter_vm.php";>Interim Video http://stream01.pixelfish.com/empire_stat/meter_vm.php";>Empire Stat Group Video http://stream01.pixelfish.com/cha/meter_vm.php";>Columbia Healthcare Analytics Video Unsubscribe to safely remove yourself from this email list, please send email to [EMAIL PROTECTED] Powered by Pixelfish http://www.pixelfish.com ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: 6.2 loader hangs on Supermicro P8SCT
On Friday 13 April 2007 14:50, patrick wrote: > I had the same symptones with a Supermicro 5014C-T (has P8SCi board) > > I 'fixed' this by adding autoboot_delay="-1" in /boot/loader.conf. > > since then it boots normaly I have tried this but it doesn't fix it here :( I've emailed Supermicro but I dunno how long it will take them to get back to me. I'm also not really sure how this can be debugged since the computer locks up solid :( -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C pgpjDy2DzLQz7.pgp Description: PGP signature