Re: VirtualBox hangs on FreeBSD 10-stable and then reports error
On 05/13/2015 14:57, Graham Menhennitt wrote: I've been successfully running VirtualBox for some time. Last week I updated my /usr/src/ and /usr/ports, built installed world and kernel, and did portupgrade -a. Now VirtualBox won't start - it doesn't even show the window with the list of VMs. I've tried as root and as myself. I've also tried removing my .virtualbox directory. kldstat shows vboxdrv.ko is loaded. I've rebooted after building and installing everything. I've run it in truss as root and the bzipped output file is at http://menhennitt.com.au/truss.bz2. It runs for a few seconds and then gets to the point in the truss output (around line 2890) where it does the stuff shown below. It repeats the last poll() line at 5 second intervals for about 5 minutes. It then shows a dialog: Failed to create the VirtualBox COM object. The application will now terminate. Callee RC: NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) When I click Ok in the dialog, it exits. It's virtualbox-ose-4.3.26 and virtualbox-ose-kmod-4.3.26 on FreeBSD 10-stable from last week on amd64. Does anybody please have any clues? Thanks, Graham Hi Graham, see this thread on the forums: https://forums.freebsd.org/threads/virtualbox-4-3-26-wont-start.51341/ ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
VirtualBox hangs on FreeBSD 10-stable and then reports error
I've been successfully running VirtualBox for some time. Last week I updated my /usr/src/ and /usr/ports, built installed world and kernel, and did portupgrade -a. Now VirtualBox won't start - it doesn't even show the window with the list of VMs. I've tried as root and as myself. I've also tried removing my .virtualbox directory. kldstat shows vboxdrv.ko is loaded. I've rebooted after building and installing everything. I've run it in truss as root and the bzipped output file is at http://menhennitt.com.au/truss.bz2. It runs for a few seconds and then gets to the point in the truss output (around line 2890) where it does the stuff shown below. It repeats the last poll() line at 5 second intervals for about 5 minutes. It then shows a dialog: Failed to create the VirtualBox COM object. The application will now terminate. Callee RC: NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) When I click Ok in the dialog, it exits. It's virtualbox-ose-4.3.26 and virtualbox-ose-kmod-4.3.26 on FreeBSD 10-stable from last week on amd64. Does anybody please have any clues? Thanks, Graham open(/etc/spwd.db,O_CLOEXEC,00)= 16 (0x10) fstat(16,{ mode=-rw--- ,inode=33147405,size=40960,blksize=32768 }) = 0 (0x0) read(16,\0\^F\^Ua\0\0\0\^B\0\0\^D\M-R\0...,260) = 260 (0x104) pread(0x10,0x801e89000,0x1000,0x6000,0x1,0x0)= 4096 (0x1000) pread(0x10,0x801e8a000,0x1000,0x4000,0x1,0x0)= 4096 (0x1000) close(16)= 0 (0x0) connect(15,{ AF_UNIX /tmp/.vbox-root-ipc/ipcd },106) ERR#61 'Connection refused' close(15)= 0 (0x0) pipe(0x7fff4570) = 0 (0x0) fcntl(15,F_SETFD,FD_CLOEXEC) = 0 (0x0) fcntl(16,F_SETFD,FD_CLOEXEC) = 0 (0x0) fcntl(15,F_GETFD,) = 1 (0x1) fcntl(15,F_GETFL,) = 2 (0x2) fcntl(15,F_SETFL,O_NONBLOCK|0x2) = 0 (0x0) fcntl(16,F_GETFD,) = 1 (0x1) fcntl(16,F_GETFL,) = 2 (0x2) fcntl(16,F_SETFL,O_NONBLOCK|0x2) = 0 (0x0) fcntl(16,F_SETFD,0x0)= 0 (0x0) openat(0xff9c,0x81054f561,0x2,0x0,0x80,0xfe1bfed8) = 17 (0x11) fcntl(17,F_GETFD,) = 0 (0x0) openat(0xff9c,0x7fff2a80,0x10,0x0,0x7ff7fed5c75a,0x8080808080808080) ERR#2 'No such file or directory' openat(0xff9c,0x7fff2f20,0x10,0x0,0x7ff7fed5c75a,0x8080808080808080) ERR#2 'No such file or directory' openat(0xff9c,0x7fff2a80,0x10,0x0,0x7ff7fed5c75a,0x8080808080808080) ERR#2 'No such file or directory' openat(0xff9c,0x7fff2f20,0x10,0x0,0x7ff7fed5c75a,0x8080808080808080) ERR#2 'No such file or directory' access(/usr/local/lib/virtualbox/VBoxXPCOMIPCD,1) = 0 (0x0) sigprocmask(SIG_BLOCK,SIGHUP|SIGINT|SIGQUIT|SIGILL|SIGTRAP|SIGABRT|SIGEMT|SIGFPE|SIGKILL|SIGBUS|SIGSEGV|SIGSYS|SIGPIPE|SIGALRM|SIGTERM|SIGURG|SIGSTOP|SIGTSTP|SIGCONT|SIGCHLD|SIGTTIN|SIGTTOU|SIGIO|SIGXCPU|SIGXFSZ|SIGVTALRM|SIGPROF|SIGWINCH|SIGINFO|SIGUSR1|SIGUSR2,SIGALRM) = 0 (0x0) fork() = 51627 (0xc9ab) sigprocmask(SIG_SETMASK,SIGALRM,0x0) = 0 (0x0) SIGNAL 20 (SIGCHLD) sigprocmask(SIG_SETMASK,SIGALRM|SIGCHLD,0x0) = 0 (0x0) write(11,\0,1) = 1 (0x1) sigreturn(0x7fff2b60,0x7fff2b60,0x301,0x0,0xfbc0,0x7fff3278) = 0 (0x0) wait4(51627,{ EXITED,val=0 },0x0,0x0)= 51627 (0xc9ab) close(17)= 0 (0x0) close(16)= 0 (0x0) read(15,0x7fff45af,1)ERR#35 'Resource temporarily unavailable' poll({15/POLLIN|POLLPRI},1,5000) = 0 (0x0) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Re: VirtualBox hangs on FreeBSD 10-stable and then reports error
On 13/05/2015 10:57 PM, Graham Menhennitt wrote: I've been successfully running VirtualBox for some time. Last week I updated my /usr/src/ and /usr/ports, built installed world and kernel, and did portupgrade -a. Now VirtualBox won't start - it doesn't even show the window with the list of VMs. I've tried as root and as myself. I've also tried removing my .virtualbox directory. kldstat shows vboxdrv.ko is loaded. I've rebooted after building and installing everything. I've run it in truss as root and the bzipped output file is at http://menhennitt.com.au/truss.bz2. It runs for a few seconds and then gets to the point in the truss output (around line 2890) where it does the stuff shown below. It repeats the last poll() line at 5 second intervals for about 5 minutes. It then shows a dialog: Failed to create the VirtualBox COM object. The application will now terminate. Callee RC: NS_ERROR_FACTORY_NOT_REGISTERED (0x80040154) When I click Ok in the dialog, it exits. It's virtualbox-ose-4.3.26 and virtualbox-ose-kmod-4.3.26 on FreeBSD 10-stable from last week on amd64. Does anybody please have any clues? Thanks, Graham Hi Graham, you may also want to try the freebsd-emulation list and #freebsd-vbox on IRC [1] [1] https://wiki.freebsd.org/VirtualBox ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
Re: vt_core.c vt_is_cursor_in_area different behavior after r282823
On 13 May 2015 at 03:02, Marko Turk mark...@markoturk.info wrote: Hi, after r282823, new vt_is_cursor_in_area is, in some cases, returning different values than the old function. For example: If (my + vd-vd_mcursor-height) is equal to (area-tr_begin.tp_row), old function will return 1 and new function will return 0. Is this intended behavior or is it a bug? Thanks for the detailed look at the change! It's intentional -- when they're equal the cursor rectangle and display area rectangle border each other, but do not actually overlap. It doesn't hurt to return 1 in this case, it just results in some unnecessary drawing. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to freebsd-stable-unsubscr...@freebsd.org
vt_core.c vt_is_cursor_in_area different behavior after r282823
Hi, after r282823, new vt_is_cursor_in_area is, in some cases, returning different values than the old function. For example: If (my + vd-vd_mcursor-height) is equal to (area-tr_begin.tp_row), old function will return 1 and new function will return 0. Is this intended behavior or is it a bug? BR, Marko pgpiROKPHB27F.pgp Description: PGP signature