Re: Cannot start install cd of 6.2-R at all
Artem Kuchin wrote: Mark Kirkwood wrote: I have seen this with a Tyan PIII board + TX2000. In my case re-trying the boot from cd several times would *eventually* get a working installer session. (If you search the archives you'll see several cases of folks encountering this). Unfortunately I don't know of any solution. A (tedious) workaround (in case repeated attempts always fail for you), is to install a minimal system off an earlier version of FreeBSD and run the installer off the installed system - or just src upgrade to the version you want. I found that the 4.x, 5.0, 5.1 and 5.2 cd's all worked fine - but 5.3 onwards and 6.x would register dump. There is a better workaround which i used. A simple start of installer from 4 floppies. Then install the whole system from CD-ROM. It does work but insolved copying of floppy images onto the disks. However is it a very annoying problem which i have been encountering since 5.0-RELEASE. The bootloader failed when trying to load installed from CD-ROM on pretty much every PIII and old Celeron pc which i tried. (it is about 6 machines by now). Very weird and i have no idea to how help to solve the problem. Right, however it means you need a floppy drive - and I've "gone floppiless" for my machines... :-) ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Cannot start install cd of 6.2-R at all
Mark Kirkwood wrote: Artem Kuchin wrote: Hello! I am having a VERY weird problem. The pc config is: 1) Celeron 1+ GHZ 2) Intel PCI ethernet nic 3) Fasttrak TX2000 raid + 2 mirrored disks (seagate 80gb) 4) teac dvd driver 5) 512 MB ram 6) Chaintech montherboard (old one) also tried on gigabyte motherboard I insert boot cd and when it starts loading a get a dump of cpu register scrolling crazy on the screen. If i delete TX2000 the installer loads fine. Any idea what is happening and how to SOLVE it? I have seen this with a Tyan PIII board + TX2000. In my case re-trying the boot from cd several times would *eventually* get a working installer session. (If you search the archives you'll see several cases of folks encountering this). Unfortunately I don't know of any solution. A (tedious) workaround (in case repeated attempts always fail for you), is to install a minimal system off an earlier version of FreeBSD and run the installer off the installed system - or just src upgrade to the version you want. I found that the 4.x, 5.0, 5.1 and 5.2 cd's all worked fine - but 5.3 onwards and 6.x would register dump. There is a better workaround which i used. A simple start of installer from 4 floppies. Then install the whole system from CD-ROM. It does work but insolved copying of floppy images onto the disks. However is it a very annoying problem which i have been encountering since 5.0-RELEASE. The bootloader failed when trying to load installed from CD-ROM on pretty much every PIII and old Celeron pc which i tried. (it is about 6 machines by now). Very weird and i have no idea to how help to solve the problem. -- Regards Artem ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Cannot start install cd of 6.2-R at all
Artem Kuchin wrote: Hello! I am having a VERY weird problem. The pc config is: 1) Celeron 1+ GHZ 2) Intel PCI ethernet nic 3) Fasttrak TX2000 raid + 2 mirrored disks (seagate 80gb) 4) teac dvd driver 5) 512 MB ram 6) Chaintech montherboard (old one) also tried on gigabyte motherboard I insert boot cd and when it starts loading a get a dump of cpu register scrolling crazy on the screen. If i delete TX2000 the installer loads fine. Any idea what is happening and how to SOLVE it? I have seen this with a Tyan PIII board + TX2000. In my case re-trying the boot from cd several times would *eventually* get a working installer session. (If you search the archives you'll see several cases of folks encountering this). Unfortunately I don't know of any solution. A (tedious) workaround (in case repeated attempts always fail for you), is to install a minimal system off an earlier version of FreeBSD and run the installer off the installed system - or just src upgrade to the version you want. I found that the 4.x, 5.0, 5.1 and 5.2 cd's all worked fine - but 5.3 onwards and 6.x would register dump. Cheers Mark ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Cannot start install cd of 6.2-R at all
Hello! I am having a VERY weird problem. The pc config is: 1) Celeron 1+ GHZ 2) Intel PCI ethernet nic 3) Fasttrak TX2000 raid + 2 mirrored disks (seagate 80gb) 4) teac dvd driver 5) 512 MB ram 6) Chaintech montherboard (old one) also tried on gigabyte motherboard I insert boot cd and when it starts loading a get a dump of cpu register scrolling crazy on the screen. If i delete TX2000 the installer loads fine. Any idea what is happening and how to SOLVE it? -- Regards, Artem ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"