Re: Random hangs with 7.1-PRE

2008-11-28 Thread Kris Kennaway

Richard Tector wrote:
I'm not discounting hardware here, but I'm having problems with a 
previously stable amd64 system (dmesg attached) now running:

FreeBSD 7.1-PRERELEASE #1: Wed Nov 26 00:10:41 GMT 2008
and previously running a RELENG_7 from around Oct 15th which also 
exhibited the problem.


The system appears to hang with SSH terminals eventually timing out, and 
no other services being available. The odd thing is, when I go to the 
console, I can switch between terminals with Alt-F2, etc, but can not 
type anything. Pressing the power button a couple of times gives an acpi 
not ready message, so it doesn't appear the system has completely hung.


The system is in a cool room and under little load running basic 
services: samba, postgres, dhcp, etc. Never seen problems with the 
machine previously.


Does anyone have any thoughts or suggestions on narrowing down the cause?


See the developers handbook chapter on kernel debugging for full 
instructions on how to gather the necessary information to proceed.


Kris
___
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to [EMAIL PROTECTED]


Random hangs with 7.1-PRE

2008-11-26 Thread Richard Tector
I'm not discounting hardware here, but I'm having problems with a 
previously stable amd64 system (dmesg attached) now running:

FreeBSD 7.1-PRERELEASE #1: Wed Nov 26 00:10:41 GMT 2008
and previously running a RELENG_7 from around Oct 15th which also 
exhibited the problem.


The system appears to hang with SSH terminals eventually timing out, and 
no other services being available. The odd thing is, when I go to the 
console, I can switch between terminals with Alt-F2, etc, but can not 
type anything. Pressing the power button a couple of times gives an acpi 
not ready message, so it doesn't appear the system has completely hung.


The system is in a cool room and under little load running basic 
services: samba, postgres, dhcp, etc. Never seen problems with the 
machine previously.


Does anyone have any thoughts or suggestions on narrowing down the cause?

Regards,

Richard Tector
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-PRERELEASE #1: Wed Nov 26 00:10:41 GMT 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/DAFFY
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) Dual  CPU  E2160  @ 1.80GHz (1795.51-MHz K8-class CPU)
  Origin = GenuineIntel  Id = 0x6fd  Stepping = 13
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0xe39dSSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM
  AMD Features=0x20100800SYSCALL,NX,LM
  AMD Features2=0x1LAHF
  Cores per package: 2
usable memory = 2137554944 (2038 MB)
avail memory  = 2062880768 (1967 MB)
ACPI APIC Table: PTLTD  APIC  
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 Version 2.0 irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: PTLTDXSDT on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-safe frequency 3579545 Hz quality 850
acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
uhci0: UHCI (generic) USB controller port 0x1820-0x183f irq 16 at device 26.0 
on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: UHCI (generic) USB controller on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: UHCI (generic) USB controller port 0x1840-0x185f irq 17 at device 26.1 
on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: UHCI (generic) USB controller on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: UHCI (generic) USB controller port 0x1860-0x187f irq 18 at device 26.2 
on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: UHCI (generic) USB controller on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: EHCI (generic) USB 2.0 controller mem 0xf4a02800-0xf4a02bff irq 18 at 
device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: EHCI (generic) USB 2.0 controller on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 on usb3
uhub3: 6 ports with 6 removable, self powered
umass0: Cypress Semiconductor USB2.0 Storage Device, class 0/0, rev 2.00/0.01, 
addr 2 on uhub3
pcib1: ACPI PCI-PCI bridge irq 16 at device 28.0 on pci0
pci5: ACPI PCI bus on pcib1
pcib2: ACPI PCI-PCI bridge at device 0.0 on pci5
pci6: ACPI PCI bus on pcib2
pcib3: PCI-PCI bridge at device 8.0 on pci6
pci7: PCI bus on pcib3
arcmsr0: Areca SATA Host Adapter RAID Controller (RAID6 capable)
 mem 0xf450-0xf4500fff,0xf400-0xf43f irq 18 at device 14.0 on pci7
ARECA RAID ADAPTER0: Driver Version 1.20.00.15 2007-10-07
ARECA RAID ADAPTER0: FIRMWARE VERSION V1.42 2006-10-13
arcmsr0: [ITHREAD]
pcib4: ACPI PCI-PCI bridge irq 16 at device 28.4 on pci0
pci13: ACPI PCI bus on pcib4
em0: Intel(R) PRO/1000 Network Connection 6.9.5 port 0x2000-0x201f mem 
0xf448-0xf449,0xf440-0xf447 irq 16 at device 0.0 on pci13
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:e0:81:79:fd:0e
pcib5: ACPI PCI-PCI bridge irq 17 at device 28.5 on pci0
pci15: ACPI PCI bus on pcib5
em1: Intel(R) PRO/1000 Network Connection 6.9.5 port 0x3000-0x301f mem 
0xf468-0xf469,0xf460-0xf467 irq 17 at device 0.0 on pci15
em1: Using MSI interrupt
em1: [FILTER]
em1: Ethernet address: 00:e0:81:79:fd:0f
uhci3: UHCI (generic) USB controller port 0x1880-0x189f irq 16 at device 29.0 
on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: UHCI (generic)