Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Fri, Feb 05, 2010 at 10:31:37AM +1300, Jonathan Chen wrote: > On Thu, Feb 04, 2010 at 11:23:15AM -0800, Pyun YongHyeon wrote: > > On Thu, Feb 04, 2010 at 03:00:15PM +1300, Jonathan Chen wrote: > > > On Wed, Feb 03, 2010 at 05:25:03PM -0800, Pyun YongHyeon wrote: > [...] > > > > I'm not sure but recently added code to support TSO may cause the > > > > issue. Would you show me verbose boot output(only bge(4) related > > > > one)? > > > > > > bge0: > > 0x00a002> mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 > > > bge0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xf1bf > > > bge0: adjust device control 0x2000 -> 0x5000 > > > bge0: attempting to allocate 1 MSI vectors (1 supported) > > > bge0: using IRQ 258 for MSI > > > bge0: CHIP ID 0xa002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E > > > bge0: Disabling fastboot > > > bge0: Disabling fastboot > > > miibus0: on bge0 > > > bge0: bpf attached > > > bge0: Ethernet address: 00:1d:09:d2:d1:9e > > > bge0: [MPSAFE] > > > bge0: [FILTER] > > > bge0: Disabling fastboot > > > bge0: Disabling fastboot > > > bge0: link UP > > > > > > >To rule out possible TSO issue, disable TSO and try it > > > > again(#ifconfig bge0 -tso). Does it make any difference? > > > > > > Yup, it sure does! With a TSO disabled, my upload and download speeds > > > are pretty much symmetrical at a decent 10MB/s. > > > > > > > Hmm, that means TSO was broken on your controller. Because BCM5755 > > or newer controllers have no known TSO issues I don't know why the > > controller fails on TSO. Very recent controllers use new TSO format > > but I don't think your controller is one of them and FreeBSD has no > > support for these controllers anyway. > > Would you show me the output of "pciconf -lcv" of your bge(4) > > controller? > > b...@pci0:9:0:0:class=0x02 card=0x01fe1028 chip=0x167314e4 > rev=0x02 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe' > class = network > subclass = ethernet > cap 01[48] = powerspec 3 supports D0 D3 current D0 > cap 03[50] = VPD > cap 09[58] = vendor (length 120) > cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1) > > This is on a Dell Latitude D830 Laptop. > I committed a fix which disables TSO on BCM5755M. Still have no idea why it fails though. Thanks for reporting! ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Thu, Feb 04, 2010 at 11:23:15AM -0800, Pyun YongHyeon wrote: > On Thu, Feb 04, 2010 at 03:00:15PM +1300, Jonathan Chen wrote: > > On Wed, Feb 03, 2010 at 05:25:03PM -0800, Pyun YongHyeon wrote: [...] > > > I'm not sure but recently added code to support TSO may cause the > > > issue. Would you show me verbose boot output(only bge(4) related > > > one)? > > > > bge0: > > mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 > > bge0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xf1bf > > bge0: adjust device control 0x2000 -> 0x5000 > > bge0: attempting to allocate 1 MSI vectors (1 supported) > > bge0: using IRQ 258 for MSI > > bge0: CHIP ID 0xa002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E > > bge0: Disabling fastboot > > bge0: Disabling fastboot > > miibus0: on bge0 > > bge0: bpf attached > > bge0: Ethernet address: 00:1d:09:d2:d1:9e > > bge0: [MPSAFE] > > bge0: [FILTER] > > bge0: Disabling fastboot > > bge0: Disabling fastboot > > bge0: link UP > > > > >To rule out possible TSO issue, disable TSO and try it > > > again(#ifconfig bge0 -tso). Does it make any difference? > > > > Yup, it sure does! With a TSO disabled, my upload and download speeds > > are pretty much symmetrical at a decent 10MB/s. > > > > Hmm, that means TSO was broken on your controller. Because BCM5755 > or newer controllers have no known TSO issues I don't know why the > controller fails on TSO. Very recent controllers use new TSO format > but I don't think your controller is one of them and FreeBSD has no > support for these controllers anyway. > Would you show me the output of "pciconf -lcv" of your bge(4) > controller? b...@pci0:9:0:0:class=0x02 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00 vendor = 'Broadcom Corporation' device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe' class = network subclass = ethernet cap 01[48] = powerspec 3 supports D0 D3 current D0 cap 03[50] = VPD cap 09[58] = vendor (length 120) cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1) This is on a Dell Latitude D830 Laptop. Cheers. -- Jonathan Chen -- "Beer. Now there's a temporary solution." - Homer Simpson ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Thu, Feb 04, 2010 at 03:00:15PM +1300, Jonathan Chen wrote: > On Wed, Feb 03, 2010 at 05:25:03PM -0800, Pyun YongHyeon wrote: > > On Thu, Feb 04, 2010 at 11:52:55AM +1300, Jonathan Chen wrote: > > > On Tue, Feb 02, 2010 at 11:20:29PM +0200, Nikos Ntarmos wrote: > > > > On Wed, Feb 03, 2010 at 08:36:16AM +1300, Jonathan Chen wrote: > > > > > Hi, > > > > > > > > > > I've noticed that on a recent 8-STABLE/amd64, scp(1) appears to be > > > > > stalling very frequently. This is the output from a "scp -v -v" > > > > > of a 300Mb file from a local to a remote within an internal network: > > > > > > [...] > > > > > Does anyone know what's happening here? Any tips on how to track down > > > > > what the problem is? The network config appears to be fine - fetch(1) > > > > > will > > > > > have downloads speeds of up to 300KB/s. > > > > > > > > But how about upload speeds? It seems that's where scp is suffering as > > > > well. > > > > > > This is the obvious test that I should have done; and you're hit the > > > nail on the head. bge(4) on 8-STABLE (csup'd 4-Feb-2010) has a very > > > bad upload speed. > > > > > > I've just tried using ftp to transfer some files: > > > > > > Upload speed: starts at 63 KB/s, falls rapidly before stalling. > > > Download speeds: starts at 9 MB/s, increasing slightly before > > > completing. > > I'm not sure but recently added code to support TSO may cause the > > issue. Would you show me verbose boot output(only bge(4) related > > one)? > > bge0: > mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 > bge0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xf1bf > bge0: adjust device control 0x2000 -> 0x5000 > bge0: attempting to allocate 1 MSI vectors (1 supported) > bge0: using IRQ 258 for MSI > bge0: CHIP ID 0xa002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E > bge0: Disabling fastboot > bge0: Disabling fastboot > miibus0: on bge0 > bge0: bpf attached > bge0: Ethernet address: 00:1d:09:d2:d1:9e > bge0: [MPSAFE] > bge0: [FILTER] > bge0: Disabling fastboot > bge0: Disabling fastboot > bge0: link UP > > >To rule out possible TSO issue, disable TSO and try it > > again(#ifconfig bge0 -tso). Does it make any difference? > > Yup, it sure does! With a TSO disabled, my upload and download speeds > are pretty much symmetrical at a decent 10MB/s. > Hmm, that means TSO was broken on your controller. Because BCM5755 or newer controllers have no known TSO issues I don't know why the controller fails on TSO. Very recent controllers use new TSO format but I don't think your controller is one of them and FreeBSD has no support for these controllers anyway. Would you show me the output of "pciconf -lcv" of your bge(4) controller? ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Wed, Feb 03, 2010 at 05:25:03PM -0800, Pyun YongHyeon wrote: > On Thu, Feb 04, 2010 at 11:52:55AM +1300, Jonathan Chen wrote: > > On Tue, Feb 02, 2010 at 11:20:29PM +0200, Nikos Ntarmos wrote: > > > On Wed, Feb 03, 2010 at 08:36:16AM +1300, Jonathan Chen wrote: > > > > Hi, > > > > > > > > I've noticed that on a recent 8-STABLE/amd64, scp(1) appears to be > > > > stalling very frequently. This is the output from a "scp -v -v" > > > > of a 300Mb file from a local to a remote within an internal network: > > > > [...] > > > > Does anyone know what's happening here? Any tips on how to track down > > > > what the problem is? The network config appears to be fine - fetch(1) > > > > will > > > > have downloads speeds of up to 300KB/s. > > > > > > But how about upload speeds? It seems that's where scp is suffering as > > > well. > > > > This is the obvious test that I should have done; and you're hit the > > nail on the head. bge(4) on 8-STABLE (csup'd 4-Feb-2010) has a very > > bad upload speed. > > > > I've just tried using ftp to transfer some files: > > > > Upload speed: starts at 63 KB/s, falls rapidly before stalling. > > Download speeds: starts at 9 MB/s, increasing slightly before > > completing. > I'm not sure but recently added code to support TSO may cause the > issue. Would you show me verbose boot output(only bge(4) related > one)? bge0: mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 bge0: Reserved 0x1 bytes for rid 0x10 type 3 at 0xf1bf bge0: adjust device control 0x2000 -> 0x5000 bge0: attempting to allocate 1 MSI vectors (1 supported) bge0: using IRQ 258 for MSI bge0: CHIP ID 0xa002; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E bge0: Disabling fastboot bge0: Disabling fastboot miibus0: on bge0 bge0: bpf attached bge0: Ethernet address: 00:1d:09:d2:d1:9e bge0: [MPSAFE] bge0: [FILTER] bge0: Disabling fastboot bge0: Disabling fastboot bge0: link UP >To rule out possible TSO issue, disable TSO and try it > again(#ifconfig bge0 -tso). Does it make any difference? Yup, it sure does! With a TSO disabled, my upload and download speeds are pretty much symmetrical at a decent 10MB/s. Thanks! -- Jonathan Chen -- Do not take life too seriously. You will never get out of it alive. ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Thu, Feb 04, 2010 at 11:52:55AM +1300, Jonathan Chen wrote: > On Tue, Feb 02, 2010 at 11:20:29PM +0200, Nikos Ntarmos wrote: > > On Wed, Feb 03, 2010 at 08:36:16AM +1300, Jonathan Chen wrote: > > > Hi, > > > > > > I've noticed that on a recent 8-STABLE/amd64, scp(1) appears to be > > > stalling very frequently. This is the output from a "scp -v -v" > > > of a 300Mb file from a local to a remote within an internal network: > > [...] > > > Does anyone know what's happening here? Any tips on how to track down > > > what the problem is? The network config appears to be fine - fetch(1) will > > > have downloads speeds of up to 300KB/s. > > > > But how about upload speeds? It seems that's where scp is suffering as > > well. > > This is the obvious test that I should have done; and you're hit the > nail on the head. bge(4) on 8-STABLE (csup'd 4-Feb-2010) has a very > bad upload speed. > > I've just tried using ftp to transfer some files: > > Upload speed: starts at 63 KB/s, falls rapidly before stalling. > Download speeds: starts at 9 MB/s, increasing slightly before completing. > I'm not sure but recently added code to support TSO may cause the issue. Would you show me verbose boot output(only bge(4) related one)? To rule out possible TSO issue, disable TSO and try it again(#ifconfig bge0 -tso). Does it make any difference? > Device from dmesg: > bge0: 0x00a002> mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 > ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
Re: if_bge upload stalls repeatedly (Was: 8-STABLE outgoing scp stalling frequently)
On Tue, Feb 02, 2010 at 11:20:29PM +0200, Nikos Ntarmos wrote: > On Wed, Feb 03, 2010 at 08:36:16AM +1300, Jonathan Chen wrote: > > Hi, > > > > I've noticed that on a recent 8-STABLE/amd64, scp(1) appears to be > > stalling very frequently. This is the output from a "scp -v -v" > > of a 300Mb file from a local to a remote within an internal network: [...] > > Does anyone know what's happening here? Any tips on how to track down > > what the problem is? The network config appears to be fine - fetch(1) will > > have downloads speeds of up to 300KB/s. > > But how about upload speeds? It seems that's where scp is suffering as > well. This is the obvious test that I should have done; and you're hit the nail on the head. bge(4) on 8-STABLE (csup'd 4-Feb-2010) has a very bad upload speed. I've just tried using ftp to transfer some files: Upload speed: starts at 63 KB/s, falls rapidly before stalling. Download speeds: starts at 9 MB/s, increasing slightly before completing. Device from dmesg: bge0: mem 0xf1bf-0xf1bf irq 17 at device 0.0 on pci9 -- Jonathan Chen -- "I don't want to achive immortality through my works.. I want to achieve it through not dying" - Woody Allen ___ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "freebsd-stable-unsubscr...@freebsd.org"
