Re: WPS support in hostapd
Thanks. Then I didn't have to work on this. On Sun, Apr 12, 2015 at 2:07 AM, Adrian Chadd adr...@freebsd.org wrote: nl80211 is the linux wifi code. -adrian ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: WPS support in hostapd
nl80211 is the linux wifi code. -adrian ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
WPS support in hostapd
Hi, I have a WiFi printer which supports only WPS (by push button) and I am trying to get it connected to my FreeBSD AP (Freebsd 9.3-RELEASE-p10). The only information I found is the instructions in the latest version in hostapd on setting up WPS. http://w1.fi/cgit/hostap/plain/hostapd/README-WPS http://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf So I compiled and installed the hostapd from the port. Since make config didn't have the options for enabling WPS, I uncommented the lines directly in the files/config: CONFIG_WPS=Y CONFIG_WPS_UPNP=Y I followed the instructions in the README.WPS and try to connect by push button. There are no errors reported from hostapd, but I cannot connect the device to the AP via WPS. This is what I did in FreeBSD to initiate the WPS: # hostapd_cli hostapd_cli v2.4 Copyright (c) 2004-2015, Jouni Malinen j...@w1.fi and contributors This software may be distributed under the terms of the BSD license. See README for more details. Selected interface 'wlan0' Interactive mode wps_pbc 3WPS-PBC-ACTIVE OK wps_get_status PBC Status: Active Last WPS result: None 3WPS-TIMEOUT wps_get_status PBC Status: Timed-out Last WPS result: None The WPS button on the device is pushed right after wps_pbc But both are timed out. This is my current hostapd.conf: # vi /etc/hostapd.conf interface=wlan0 driver=bsd logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 debug=3 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel IEEE 802.11 related config ssid=**MASKED** macaddr_acl=0 auth_algs=1 IEEE 802.1X related config ieee8021x=0 WPA/IEEE 802.11i config # wpa=2 wpa_passphrase=**MASKED** wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP TKIP #WPS related config #Per PSK for each WPS client wpa_psk_file=/etc/hostapd.psk # Enable internal EAP server for EAP-WSC (part of Wi-Fi Protected Setup) eap_server=1 # WPS configuration (AP configured, do not allow external WPS Registrars) wps_state=2 ap_setup_locked=1 # If UUID is not configured, it will be generated based on local MAC address. #uuid=87654321-9abc-def0-1234-56789abc wps_pin_requests=/var/run/hostapd.pin-req device_name=Wireless AP manufacturer=Company model_name=WAP model_number=123 serial_number=12345 device_type=6-0050F204-1 os_version=01020300 config_methods=label display push_button keypad pbc_in_m1=1 Any help is much appreciated. Thanks, Nelson Leung ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: WPS support in hostapd
Which NIC is it? (I've never used WPS.) -a On 11 April 2015 at 10:46, Nelson Leung nelson4...@gmail.com wrote: Hi, I have a WiFi printer which supports only WPS (by push button) and I am trying to get it connected to my FreeBSD AP (Freebsd 9.3-RELEASE-p10). The only information I found is the instructions in the latest version in hostapd on setting up WPS. http://w1.fi/cgit/hostap/plain/hostapd/README-WPS http://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf So I compiled and installed the hostapd from the port. Since make config didn't have the options for enabling WPS, I uncommented the lines directly in the files/config: CONFIG_WPS=Y CONFIG_WPS_UPNP=Y I followed the instructions in the README.WPS and try to connect by push button. There are no errors reported from hostapd, but I cannot connect the device to the AP via WPS. This is what I did in FreeBSD to initiate the WPS: # hostapd_cli hostapd_cli v2.4 Copyright (c) 2004-2015, Jouni Malinen j...@w1.fi and contributors This software may be distributed under the terms of the BSD license. See README for more details. Selected interface 'wlan0' Interactive mode wps_pbc 3WPS-PBC-ACTIVE OK wps_get_status PBC Status: Active Last WPS result: None 3WPS-TIMEOUT wps_get_status PBC Status: Timed-out Last WPS result: None The WPS button on the device is pushed right after wps_pbc But both are timed out. This is my current hostapd.conf: # vi /etc/hostapd.conf interface=wlan0 driver=bsd logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 debug=3 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel IEEE 802.11 related config ssid=**MASKED** macaddr_acl=0 auth_algs=1 IEEE 802.1X related config ieee8021x=0 WPA/IEEE 802.11i config # wpa=2 wpa_passphrase=**MASKED** wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP TKIP #WPS related config #Per PSK for each WPS client wpa_psk_file=/etc/hostapd.psk # Enable internal EAP server for EAP-WSC (part of Wi-Fi Protected Setup) eap_server=1 # WPS configuration (AP configured, do not allow external WPS Registrars) wps_state=2 ap_setup_locked=1 # If UUID is not configured, it will be generated based on local MAC address. #uuid=87654321-9abc-def0-1234-56789abc wps_pin_requests=/var/run/hostapd.pin-req device_name=Wireless AP manufacturer=Company model_name=WAP model_number=123 serial_number=12345 device_type=6-0050F204-1 os_version=01020300 config_methods=label display push_button keypad pbc_in_m1=1 Any help is much appreciated. Thanks, Nelson Leung ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
Re: WPS support in hostapd
Hi, This is what I get from pciconf: ath0@pci0:5:0:0:class=0x02 card=0x2055168c chip=0x001d168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5007G Wireless Network Adapter' class = network subclass = ethernet I just found the example is using nl80211 as the driver in hostapd.conf, so I am trying this. But enabling nl80211 support in hostapd requires libnl, which is not found in /usr/port. Do you have any idea on this? Thanks! On Sun, Apr 12, 2015 at 1:53 AM, Adrian Chadd adr...@freebsd.org wrote: Which NIC is it? (I've never used WPS.) -a On 11 April 2015 at 10:46, Nelson Leung nelson4...@gmail.com wrote: Hi, I have a WiFi printer which supports only WPS (by push button) and I am trying to get it connected to my FreeBSD AP (Freebsd 9.3-RELEASE-p10). The only information I found is the instructions in the latest version in hostapd on setting up WPS. http://w1.fi/cgit/hostap/plain/hostapd/README-WPS http://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf So I compiled and installed the hostapd from the port. Since make config didn't have the options for enabling WPS, I uncommented the lines directly in the files/config: CONFIG_WPS=Y CONFIG_WPS_UPNP=Y I followed the instructions in the README.WPS and try to connect by push button. There are no errors reported from hostapd, but I cannot connect the device to the AP via WPS. This is what I did in FreeBSD to initiate the WPS: # hostapd_cli hostapd_cli v2.4 Copyright (c) 2004-2015, Jouni Malinen j...@w1.fi and contributors This software may be distributed under the terms of the BSD license. See README for more details. Selected interface 'wlan0' Interactive mode wps_pbc 3WPS-PBC-ACTIVE OK wps_get_status PBC Status: Active Last WPS result: None 3WPS-TIMEOUT wps_get_status PBC Status: Timed-out Last WPS result: None The WPS button on the device is pushed right after wps_pbc But both are timed out. This is my current hostapd.conf: # vi /etc/hostapd.conf interface=wlan0 driver=bsd logger_syslog=-1 logger_syslog_level=0 logger_stdout=-1 logger_stdout_level=0 debug=3 dump_file=/tmp/hostapd.dump ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel IEEE 802.11 related config ssid=**MASKED** macaddr_acl=0 auth_algs=1 IEEE 802.1X related config ieee8021x=0 WPA/IEEE 802.11i config # wpa=2 wpa_passphrase=**MASKED** wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP TKIP #WPS related config #Per PSK for each WPS client wpa_psk_file=/etc/hostapd.psk # Enable internal EAP server for EAP-WSC (part of Wi-Fi Protected Setup) eap_server=1 # WPS configuration (AP configured, do not allow external WPS Registrars) wps_state=2 ap_setup_locked=1 # If UUID is not configured, it will be generated based on local MAC address. #uuid=87654321-9abc-def0-1234-56789abc wps_pin_requests=/var/run/hostapd.pin-req device_name=Wireless AP manufacturer=Company model_name=WAP model_number=123 serial_number=12345 device_type=6-0050F204-1 os_version=01020300 config_methods=label display push_button keypad pbc_in_m1=1 Any help is much appreciated. Thanks, Nelson Leung ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to freebsd-wireless-unsubscr...@freebsd.org
