I assume you are using user file.
the simple entry should resemble like this:
murali Auth-Type := System,
User-Password == "murali"
Reply-Message = "Hello, Murali you are Authenticated! Go
ahead!!",
Service-Type = Login-User,
Login-Service = Telnet,
Login-IP-Host = 127.0.0.1,
Login-TCP-Port = 65536
Try removing Auth-Type and proceed, it should work
In case you are searching for the credentials from the system, i.e.,
/etc/passwd file or shadow
make sure that you have uncommented the respective entries for your
client entry
Ex : client 127.0.0.1
{
.
.
.
passwd = /etc/passwd
}
Hope you should able to cross your hurdle now ...
Otherwise some one else should help us
Bye
Murali.
Pradeep Nevatia wrote:
hello can you explain me in detail...where to make change..
Thanks
-Original Message-
From: Murali Krishna G [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Date: Fri, 04 Mar 2005 12:24:47 +0530
Subject: Re: freeradius conf.
Hello,
Check out Stefan's solution for this :: its working for me.
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type System
auth: type "System"
Stefan Winter :
how about omitting Auth-Type := System? The files section already
properly
authorized your user, but the later checks with Auth-Type System led to
the
failure.
Bye
Murali.
Pradeep Nevatia wrote:
dear please help me out where i have to make change in wich conf.
fils
pradeep..
-Original Message-
From: Doug Hardie [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Date: Wed, 2 Mar 2005 23:12:29 -0800
Subject: Re: freeradius conf.
rad_check_password: Found Auth-Type System
rlm_unix: [pradeep]: invalid password
You are configured for Unix password validatation and the password
you
gave is not the one the system has for that user id.
On Mar 2, 2005, at 23:10, Pradeep Nevatia wrote:
Dear i haven't solved my problem please help me out..
pradeep..
Dear
Recently I have installed freeradius (freeradius-0.9.3-1.i386.rpm),i
have
some problem in password auth.
i have created new user:pradeep with pass:123456
when i tried to test the auth. enabling Debug mod.
using command radtest pradeep 123456 localhost:1812 0 testing123
it generate following massage :
rad_recv: Access-Request packet from host 127.0.0.1:32783, id=176,
length=59
User-Name = "pradeep"
User-Password = "123456"
NAS-IP-Address = 255.255.255.255
NAS-Port = 0
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "eap" returns noop for request 1
rlm_realm: No '@' in User-Name = "pradeep", looking up realm
NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
users: Matched DEFAULT at 152
modcall[authorize]: module "files" returns ok for request 1
modcall[authorize]: module "mschap" returns noop for request 1
modcall: group authorize returns ok for request 1
rad_check_password: Found Auth-Type System
auth: type "System"
modcall: entering group authenticate for request 1
rlm_unix: [pradeep]: invalid password
modcall[authenticate]: module "unix" returns reject for request 1
modcall: group authenticate returns reject for request 1
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
=
=
Please help me where i have made mistake in conf.
Regards
Pradeep..
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html