Re: [PATCH] decay vect tests from run to link for pr95401
Hi Alexandre, On Tue, 30 Apr 2024 at 01:31, Alexandre Oliva wrote: > > On Apr 22, 2024, Richard Biener wrote: > > >> Regstrapped on x86_64-linux-gnu and ppc64el-linux-gnu. Also tested with > >> gcc-13 on ppc64-vx7r2 and ppc-vx7r2. Ok to install? > > > That makes sense. OK > > >> for gcc/testsuite/ChangeLog > >> > >> * lib/target-supports.exp (check_vect_support_and_set_flags): > >> Decay to link rather than compile. > > Alas, linking may fail because of an incompatible libc, as reported by > Linaro with a link to their issue GNU-1206 (I'm not posting the link to > the fully-Javascrippled Jira web page; it shows nothing useful, and I > can't post feedback there) and to > https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_m7_hard_eabi-build/10/artifact/artifacts/00-sumfiles/ > (where I could get useful information) > > I'm reverting the patch, and I'll see about some alternate approach that > can accommodate this scenario after I return from LibrePlanet. > Indeed, that's another instance of the tricky multilibs configuration issues. In this case: - we configure GCC: --disable-multilib --with-mode=thumb --with-cpu=cortex-m7 --with-float=hard --target=arm-eabi (we disable multilibs to save build time) - we run the tests with qemu/-mthumb/-march=armv7e-m+fp.dp/-mtune=cortex-m7/-mfloat-abi=hard/-mfpu=auto which matches the GCC configuration flags, but the vect.exp tests add -mfpu=neon -mfloat-abi=softfp -march=armv7-a and link fails because the toolchain does not support softfp libs HTH Thanks, Christophe > -- > Alexandre Oliva, happy hackerhttps://FSFLA.org/blogs/lxo/ >Free Software Activist GNU Toolchain Engineer > More tolerance and less prejudice are key for inclusion and diversity > Excluding neuro-others for not behaving ""normal"" is *not* inclusive
Re: [PATCH] decay vect tests from run to link for pr95401
On Apr 22, 2024, Richard Biener wrote: >> Regstrapped on x86_64-linux-gnu and ppc64el-linux-gnu. Also tested with >> gcc-13 on ppc64-vx7r2 and ppc-vx7r2. Ok to install? > That makes sense. OK >> for gcc/testsuite/ChangeLog >> >> * lib/target-supports.exp (check_vect_support_and_set_flags): >> Decay to link rather than compile. Alas, linking may fail because of an incompatible libc, as reported by Linaro with a link to their issue GNU-1206 (I'm not posting the link to the fully-Javascrippled Jira web page; it shows nothing useful, and I can't post feedback there) and to https://ci.linaro.org/job/tcwg_gnu_embed_check_gcc--master-thumb_m7_hard_eabi-build/10/artifact/artifacts/00-sumfiles/ (where I could get useful information) I'm reverting the patch, and I'll see about some alternate approach that can accommodate this scenario after I return from LibrePlanet. -- Alexandre Oliva, happy hackerhttps://FSFLA.org/blogs/lxo/ Free Software Activist GNU Toolchain Engineer More tolerance and less prejudice are key for inclusion and diversity Excluding neuro-others for not behaving ""normal"" is *not* inclusive
Re: [PATCH] decay vect tests from run to link for pr95401
On Mon, Apr 22, 2024 at 12:05 PM Alexandre Oliva wrote:
>
> Ping?-ish for the full version of the RFC posted at
> https://gcc.gnu.org/pipermail/gcc-patches/2021-March/566588.html
>
> On Mar 11, 2021, Richard Biener wrote:
>
> > On Thu, Mar 11, 2021 at 9:03 AM Alexandre Oliva wrote:
>
> >> So I'm leaning towards this proposed change, just extended to other
> >> platforms that also decay from run to compile rather than link, and thus
> >> run into this problem in g++.dg/vect/pr95401.cc. Would this be
> >> acceptable?
>
> > I think that's OK. It's probably difficult to make the test UNSUPPORTED
> > when dg-additional-sources is discovered with a dg-do compile test?
>
> Thanks, here's a completed version.
>
>
> When vect.exp finds our configuration disables altivec by default, it
> disables the execution of vectorization tests, assuming the test
> hardware doesn't support it.
>
> Tests become just compile tests, but compile tests won't work
> correctly when additional sources are named, e.g. pr95401.cc, because
> GCC refuses to compile multiple files into the same asm output.
>
> With this patch, the default for when execution is not possible
> becomes link.
>
> Regstrapped on x86_64-linux-gnu and ppc64el-linux-gnu. Also tested with
> gcc-13 on ppc64-vx7r2 and ppc-vx7r2. Ok to install?
That makes sense. OK
Thanks,
Richard.
>
> for gcc/testsuite/ChangeLog
>
> * lib/target-supports.exp (check_vect_support_and_set_flags):
> Decay to link rather than compile.
> ---
> gcc/testsuite/lib/target-supports.exp | 18 +-
> 1 file changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/gcc/testsuite/lib/target-supports.exp
> b/gcc/testsuite/lib/target-supports.exp
> index 3a5713d98691f..54a55585371b0 100644
> --- a/gcc/testsuite/lib/target-supports.exp
> +++ b/gcc/testsuite/lib/target-supports.exp
> @@ -11625,7 +11625,7 @@ proc check_vect_support_and_set_flags { } {
> if [check_750cl_hw_available] {
> set dg-do-what-default run
> } else {
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif [istarget powerpc*-*-*] {
> # Skip targets not supporting -maltivec.
> @@ -11655,14 +11655,14 @@ proc check_vect_support_and_set_flags { } {
> # some other cpu type specified above.
> set DEFAULT_VECTCFLAGS [linsert $DEFAULT_VECTCFLAGS 0
> "-mcpu=970"]
> }
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif { [istarget i?86-*-*] || [istarget x86_64-*-*] } {
> lappend DEFAULT_VECTCFLAGS "-msse2"
> if { [check_effective_target_sse2_runtime] } {
> set dg-do-what-default run
> } else {
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif { [istarget mips*-*-*]
>&& [check_effective_target_nomips16] } {
> @@ -11681,7 +11681,7 @@ proc check_vect_support_and_set_flags { } {
> if [check_effective_target_ultrasparc_hw] {
> set dg-do-what-default run
> } else {
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif [istarget alpha*-*-*] {
> # Alpha's vectorization capabilities are extremely limited.
> @@ -11694,7 +11694,7 @@ proc check_vect_support_and_set_flags { } {
> if [check_alpha_max_hw_available] {
> set dg-do-what-default run
> } else {
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif [istarget ia64-*-*] {
> set dg-do-what-default run
> @@ -11707,7 +11707,7 @@ proc check_vect_support_and_set_flags { } {
> if [is-effective-target arm_neon_hw] {
> set dg-do-what-default run
> } else {
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif [istarget aarch64*-*-*] {
> set dg-do-what-default run
> @@ -11731,7 +11731,7 @@ proc check_vect_support_and_set_flags { } {
> set dg-do-what-default run
> } else {
> lappend DEFAULT_VECTCFLAGS "-march=z14" "-mzarch"
> -set dg-do-what-default compile
> +set dg-do-what-default link
> }
> } elseif [istarget amdgcn-*-*] {
> set dg-do-what-default run
> @@ -11742,7 +11742,7 @@ proc check_vect_support_and_set_flags { } {
> foreach item [add_options_for_riscv_v ""] {
> lappend DEFAULT_VECTCFLAGS $item
> }
> - set dg-do-what-default compile
> + set dg-do-what-default link
> }
> } elseif [istarget loongarch*-*-*] {
># Set the default vectorization option to "-mlsx" due to the problem
> @@ -11751,7 +11751,7 @@ proc check_vect_support_and_set_flags { } {
>if [
[PATCH] decay vect tests from run to link for pr95401
Ping?-ish for the full version of the RFC posted at
https://gcc.gnu.org/pipermail/gcc-patches/2021-March/566588.html
On Mar 11, 2021, Richard Biener wrote:
> On Thu, Mar 11, 2021 at 9:03 AM Alexandre Oliva wrote:
>> So I'm leaning towards this proposed change, just extended to other
>> platforms that also decay from run to compile rather than link, and thus
>> run into this problem in g++.dg/vect/pr95401.cc. Would this be
>> acceptable?
> I think that's OK. It's probably difficult to make the test UNSUPPORTED
> when dg-additional-sources is discovered with a dg-do compile test?
Thanks, here's a completed version.
When vect.exp finds our configuration disables altivec by default, it
disables the execution of vectorization tests, assuming the test
hardware doesn't support it.
Tests become just compile tests, but compile tests won't work
correctly when additional sources are named, e.g. pr95401.cc, because
GCC refuses to compile multiple files into the same asm output.
With this patch, the default for when execution is not possible
becomes link.
Regstrapped on x86_64-linux-gnu and ppc64el-linux-gnu. Also tested with
gcc-13 on ppc64-vx7r2 and ppc-vx7r2. Ok to install?
for gcc/testsuite/ChangeLog
* lib/target-supports.exp (check_vect_support_and_set_flags):
Decay to link rather than compile.
---
gcc/testsuite/lib/target-supports.exp | 18 +-
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/gcc/testsuite/lib/target-supports.exp
b/gcc/testsuite/lib/target-supports.exp
index 3a5713d98691f..54a55585371b0 100644
--- a/gcc/testsuite/lib/target-supports.exp
+++ b/gcc/testsuite/lib/target-supports.exp
@@ -11625,7 +11625,7 @@ proc check_vect_support_and_set_flags { } {
if [check_750cl_hw_available] {
set dg-do-what-default run
} else {
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif [istarget powerpc*-*-*] {
# Skip targets not supporting -maltivec.
@@ -11655,14 +11655,14 @@ proc check_vect_support_and_set_flags { } {
# some other cpu type specified above.
set DEFAULT_VECTCFLAGS [linsert $DEFAULT_VECTCFLAGS 0
"-mcpu=970"]
}
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif { [istarget i?86-*-*] || [istarget x86_64-*-*] } {
lappend DEFAULT_VECTCFLAGS "-msse2"
if { [check_effective_target_sse2_runtime] } {
set dg-do-what-default run
} else {
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif { [istarget mips*-*-*]
&& [check_effective_target_nomips16] } {
@@ -11681,7 +11681,7 @@ proc check_vect_support_and_set_flags { } {
if [check_effective_target_ultrasparc_hw] {
set dg-do-what-default run
} else {
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif [istarget alpha*-*-*] {
# Alpha's vectorization capabilities are extremely limited.
@@ -11694,7 +11694,7 @@ proc check_vect_support_and_set_flags { } {
if [check_alpha_max_hw_available] {
set dg-do-what-default run
} else {
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif [istarget ia64-*-*] {
set dg-do-what-default run
@@ -11707,7 +11707,7 @@ proc check_vect_support_and_set_flags { } {
if [is-effective-target arm_neon_hw] {
set dg-do-what-default run
} else {
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif [istarget aarch64*-*-*] {
set dg-do-what-default run
@@ -11731,7 +11731,7 @@ proc check_vect_support_and_set_flags { } {
set dg-do-what-default run
} else {
lappend DEFAULT_VECTCFLAGS "-march=z14" "-mzarch"
-set dg-do-what-default compile
+set dg-do-what-default link
}
} elseif [istarget amdgcn-*-*] {
set dg-do-what-default run
@@ -11742,7 +11742,7 @@ proc check_vect_support_and_set_flags { } {
foreach item [add_options_for_riscv_v ""] {
lappend DEFAULT_VECTCFLAGS $item
}
- set dg-do-what-default compile
+ set dg-do-what-default link
}
} elseif [istarget loongarch*-*-*] {
# Set the default vectorization option to "-mlsx" due to the problem
@@ -11751,7 +11751,7 @@ proc check_vect_support_and_set_flags { } {
if [check_effective_target_loongarch_sx_hw] {
set dg-do-what-default run
} else {
- set dg-do-what-default compile
+ set dg-do-what-default link
}
} else {
return 0
--
Alexandre Oliva, happy hackerhttps://FSFLA.org/blogs/lxo/
Free Software Activist
