Re: GnuCash 2.6.7 question
This will sound like a stupid response, but it’s happened to me a bunch… Are you 100% sure you have the date right on the transaction when you enter it? I’ve had this happen too many times when I enter just the month/day on a transaction, and GnuCash puts in last year’s year for some reason… causing the new transaction to jump up off the top of the screen when I hit “Enter” to create the transaction. Most common around the end of the year (for me), and you say you’re coming back to the DB after time off, so it might just be “helping” you in an incorrect fashion. The fact that it auto-fills when you try to re-enter it suggests that the Tx is in your ledger somewhere. If you’ve been clearing/reconciling your transactions, you can probably find it fast by scrolling up and looking for a Tx in the cleared section of your ledger which says “n” in that column. —Evan > On Mar 2, 2018, at 1:26 PM, David Dutra wrote: > > Hello, > > > > I'm very much a newbie and I'd appreciate some help. I used GnuCash last > year for our small nonprofit to keep track of income and expenses based on > transactions through our check book. I figured out how to use it for simple > and split transactions last year and it worked fine. I haven't used it since > and when I tried to carry on where I left off a year ago, I encountered a > problem. > > > > I set up a payment and split it into its two expense components - no > problem. I hit Enter, but instead of entering that transaction and moving to > the next line for the next entry, my transaction disappeared from view and > all that was left was the date. However, when I began to enter it again > beginning in the Memo column, the whole transaction reappeared with the > correct amounts and splits. Hit Enter, and the same thing happened - line > disappeared except for the date. Same thing happened when I clicked on the > Enter button on the menu rather than hitting Enter on the keyboard. > > > > Not sure why I was able to figure it out a year ago, but having issues now, > but I'm assuming I'm making some simple mistake. Can anyone help me out?? > > > > Thanks, > > David > > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: GnuCash 2.6.7 question
Also you can use the search feature to search for the lost transaction. Colin On 2 March 2018 at 19:38, Evan Van Dyke wrote: > This will sound like a stupid response, but it’s happened to me a bunch… > > Are you 100% sure you have the date right on the transaction when you enter > it? I’ve had this happen too many times when I enter just the month/day on > a transaction, and GnuCash puts in last year’s year for some reason… causing > the new transaction to jump up off the top of the screen when I hit “Enter” > to create the transaction. Most common around the end of the year (for me), > and you say you’re coming back to the DB after time off, so it might just be > “helping” you in an incorrect fashion. > > The fact that it auto-fills when you try to re-enter it suggests that the Tx > is in your ledger somewhere. If you’ve been clearing/reconciling your > transactions, you can probably find it fast by scrolling up and looking for a > Tx in the cleared section of your ledger which says “n” in that column. > > —Evan > >> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >> >> Hello, >> >> >> >> I'm very much a newbie and I'd appreciate some help. I used GnuCash last >> year for our small nonprofit to keep track of income and expenses based on >> transactions through our check book. I figured out how to use it for simple >> and split transactions last year and it worked fine. I haven't used it since >> and when I tried to carry on where I left off a year ago, I encountered a >> problem. >> >> >> >> I set up a payment and split it into its two expense components - no >> problem. I hit Enter, but instead of entering that transaction and moving to >> the next line for the next entry, my transaction disappeared from view and >> all that was left was the date. However, when I began to enter it again >> beginning in the Memo column, the whole transaction reappeared with the >> correct amounts and splits. Hit Enter, and the same thing happened - line >> disappeared except for the date. Same thing happened when I clicked on the >> Enter button on the menu rather than hitting Enter on the keyboard. >> >> >> >> Not sure why I was able to figure it out a year ago, but having issues now, >> but I'm assuming I'm making some simple mistake. Can anyone help me out?? >> >> >> >> Thanks, >> >> David >> >> ___ >> gnucash-user mailing list >> gnucash-user@gnucash.org >> To update your subscription preferences or to unsubscribe: >> https://lists.gnucash.org/mailman/listinfo/gnucash-user >> If you are using Nabble or Gmane, please see >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >> - >> Please remember to CC this list on all your replies. >> You can do this by using Reply-To-List or Reply-All. > > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
RE: GnuCash 2.6.7 question
Thanks, but I have done that and scrolled up the whole list of transactions - it's not there. -Original Message- From: gnucash-user [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On Behalf Of Colin Law Sent: Friday, March 2, 2018 3:35 PM Cc: gnucash-user Subject: Re: GnuCash 2.6.7 question Also you can use the search feature to search for the lost transaction. Colin On 2 March 2018 at 19:38, Evan Van Dyke wrote: > This will sound like a stupid response, but it’s happened to me a > bunch… > > Are you 100% sure you have the date right on the transaction when you enter > it? I’ve had this happen too many times when I enter just the month/day on > a transaction, and GnuCash puts in last year’s year for some reason… causing > the new transaction to jump up off the top of the screen when I hit “Enter” > to create the transaction. Most common around the end of the year (for me), > and you say you’re coming back to the DB after time off, so it might just be > “helping” you in an incorrect fashion. > > The fact that it auto-fills when you try to re-enter it suggests that the Tx > is in your ledger somewhere. If you’ve been clearing/reconciling your > transactions, you can probably find it fast by scrolling up and looking for a > Tx in the cleared section of your ledger which says “n” in that column. > > —Evan > >> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >> >> Hello, >> >> >> >> I'm very much a newbie and I'd appreciate some help. I used GnuCash >> last year for our small nonprofit to keep track of income and >> expenses based on transactions through our check book. I figured out >> how to use it for simple and split transactions last year and it >> worked fine. I haven't used it since and when I tried to carry on >> where I left off a year ago, I encountered a problem. >> >> >> >> I set up a payment and split it into its two expense components - no >> problem. I hit Enter, but instead of entering that transaction and >> moving to the next line for the next entry, my transaction >> disappeared from view and all that was left was the date. However, >> when I began to enter it again beginning in the Memo column, the >> whole transaction reappeared with the correct amounts and splits. Hit >> Enter, and the same thing happened - line disappeared except for the >> date. Same thing happened when I clicked on the Enter button on the menu >> rather than hitting Enter on the keyboard. >> >> >> >> Not sure why I was able to figure it out a year ago, but having >> issues now, but I'm assuming I'm making some simple mistake. Can anyone help >> me out?? >> >> >> >> Thanks, >> >> David >> >> ___ >> gnucash-user mailing list >> gnucash-user@gnucash.org >> To update your subscription preferences or to unsubscribe: >> https://lists.gnucash.org/mailman/listinfo/gnucash-user >> If you are using Nabble or Gmane, please see >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >> - >> Please remember to CC this list on all your replies. >> You can do this by using Reply-To-List or Reply-All. > > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All. --- This email has been checked for viruses by AVG. http://www.avg.com ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
Re: GnuCash 2.6.7 question
Can you enter it again and do a screenshot before hitting enter? Post it here. Colin On 2 March 2018 at 20:52, David Dutra wrote: > Thanks, but I have done that and scrolled up the whole list of transactions - > it's not there. > > > > -Original Message- > From: gnucash-user > [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On Behalf Of > Colin Law > Sent: Friday, March 2, 2018 3:35 PM > Cc: gnucash-user > Subject: Re: GnuCash 2.6.7 question > > Also you can use the search feature to search for the lost transaction. > > Colin > > On 2 March 2018 at 19:38, Evan Van Dyke wrote: >> This will sound like a stupid response, but it’s happened to me a >> bunch… >> >> Are you 100% sure you have the date right on the transaction when you enter >> it? I’ve had this happen too many times when I enter just the month/day on >> a transaction, and GnuCash puts in last year’s year for some reason… causing >> the new transaction to jump up off the top of the screen when I hit “Enter” >> to create the transaction. Most common around the end of the year (for me), >> and you say you’re coming back to the DB after time off, so it might just be >> “helping” you in an incorrect fashion. >> >> The fact that it auto-fills when you try to re-enter it suggests that the Tx >> is in your ledger somewhere. If you’ve been clearing/reconciling your >> transactions, you can probably find it fast by scrolling up and looking for >> a Tx in the cleared section of your ledger which says “n” in that column. >> >> —Evan >> >>> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >>> >>> Hello, >>> >>> >>> >>> I'm very much a newbie and I'd appreciate some help. I used GnuCash >>> last year for our small nonprofit to keep track of income and >>> expenses based on transactions through our check book. I figured out >>> how to use it for simple and split transactions last year and it >>> worked fine. I haven't used it since and when I tried to carry on >>> where I left off a year ago, I encountered a problem. >>> >>> >>> >>> I set up a payment and split it into its two expense components - no >>> problem. I hit Enter, but instead of entering that transaction and >>> moving to the next line for the next entry, my transaction >>> disappeared from view and all that was left was the date. However, >>> when I began to enter it again beginning in the Memo column, the >>> whole transaction reappeared with the correct amounts and splits. Hit >>> Enter, and the same thing happened - line disappeared except for the >>> date. Same thing happened when I clicked on the Enter button on the menu >>> rather than hitting Enter on the keyboard. >>> >>> >>> >>> Not sure why I was able to figure it out a year ago, but having >>> issues now, but I'm assuming I'm making some simple mistake. Can anyone >>> help me out?? >>> >>> >>> >>> Thanks, >>> >>> David >>> >>> ___ >>> gnucash-user mailing list >>> gnucash-user@gnucash.org >>> To update your subscription preferences or to unsubscribe: >>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>> If you are using Nabble or Gmane, please see >>> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >>> - >>> Please remember to CC this list on all your replies. >>> You can do this by using Reply-To-List or Reply-All. >> >> ___ >> gnucash-user mailing list >> gnucash-user@gnucash.org >> To update your subscription preferences or to unsubscribe: >> https://lists.gnucash.org/mailman/listinfo/gnucash-user >> If you are using Nabble or Gmane, please see >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >> - >> Please remember to CC this list on all your replies. >> You can do this by using Reply-To-List or Reply-All. > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. > > --- > This email has been checked for viruses by AVG. > http://www.avg.com > ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.
RE: GnuCash 2.6.7 question
Colin, I've attached a screen shot. Everything is fine through the transaction dated 2/25/2017 that I entered a year ago. Today I wanted to pick up with the first transaction of the new fiscal year which was a cash payment of $1,550 dated 3/3/2017 that was split between $1,500 for salary and $50 for expenses. I believe the way it's shown on the screen is the way it should look. The problem is, if I hit Enter (either by hitting the key or clicking on the menu), the transaction is no longer there - or anywhere else on the whole ledger - but if I start to input it again, it all comes back, properly split. D -Original Message- From: Colin Law [mailto:clan...@gmail.com] Sent: Friday, March 2, 2018 3:57 PM To: David Dutra Cc: gnucash-user Subject: Re: GnuCash 2.6.7 question Can you enter it again and do a screenshot before hitting enter? Post it here. Colin On 2 March 2018 at 20:52, David Dutra wrote: > Thanks, but I have done that and scrolled up the whole list of transactions - > it's not there. > > > > -Original Message- > From: gnucash-user > [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On > Behalf Of Colin Law > Sent: Friday, March 2, 2018 3:35 PM > Cc: gnucash-user > Subject: Re: GnuCash 2.6.7 question > > Also you can use the search feature to search for the lost transaction. > > Colin > > On 2 March 2018 at 19:38, Evan Van Dyke wrote: >> This will sound like a stupid response, but it’s happened to me a >> bunch… >> >> Are you 100% sure you have the date right on the transaction when you enter >> it? I’ve had this happen too many times when I enter just the month/day on >> a transaction, and GnuCash puts in last year’s year for some reason… causing >> the new transaction to jump up off the top of the screen when I hit “Enter” >> to create the transaction. Most common around the end of the year (for me), >> and you say you’re coming back to the DB after time off, so it might just be >> “helping” you in an incorrect fashion. >> >> The fact that it auto-fills when you try to re-enter it suggests that the Tx >> is in your ledger somewhere. If you’ve been clearing/reconciling your >> transactions, you can probably find it fast by scrolling up and looking for >> a Tx in the cleared section of your ledger which says “n” in that column. >> >> —Evan >> >>> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >>> >>> Hello, >>> >>> >>> >>> I'm very much a newbie and I'd appreciate some help. I used GnuCash >>> last year for our small nonprofit to keep track of income and >>> expenses based on transactions through our check book. I figured out >>> how to use it for simple and split transactions last year and it >>> worked fine. I haven't used it since and when I tried to carry on >>> where I left off a year ago, I encountered a problem. >>> >>> >>> >>> I set up a payment and split it into its two expense components - no >>> problem. I hit Enter, but instead of entering that transaction and >>> moving to the next line for the next entry, my transaction >>> disappeared from view and all that was left was the date. However, >>> when I began to enter it again beginning in the Memo column, the >>> whole transaction reappeared with the correct amounts and splits. >>> Hit Enter, and the same thing happened - line disappeared except for >>> the date. Same thing happened when I clicked on the Enter button on the >>> menu rather than hitting Enter on the keyboard. >>> >>> >>> >>> Not sure why I was able to figure it out a year ago, but having >>> issues now, but I'm assuming I'm making some simple mistake. Can anyone >>> help me out?? >>> >>> >>> >>> Thanks, >>> >>> David >>> >>> ___ >>> gnucash-user mailing list >>> gnucash-user@gnucash.org >>> To update your subscription preferences or to unsubscribe: >>> https://lists.gnucash.org/mailman/listinfo/gnucash-user >>> If you are using Nabble or Gmane, please see >>> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >>> - >>> Please remember to CC this list on all your replies. >>> You can do this by using Reply-To-List or Reply-All. >> >> ___ >> gnucash-user mailing list >> gnucash-user@gnucash.org >> To update your subscription preferences
Re: GnuCash 2.6.7 question
Have a look in View > Filter By (from that account) and see if you have selected a date range to show. Colin On 2 March 2018 at 21:16, David Dutra wrote: > Colin, > > I've attached a screen shot. Everything is fine through the transaction dated > 2/25/2017 that I entered a year ago. Today I wanted to pick up with the first > transaction of the new fiscal year which was a cash payment of $1,550 dated > 3/3/2017 that was split between $1,500 for salary and $50 for expenses. I > believe the way it's shown on the screen is the way it should look. The > problem is, if I hit Enter (either by hitting the key or clicking on the > menu), the transaction is no longer there - or anywhere else on the whole > ledger - but if I start to input it again, it all comes back, properly split. > > D > > -Original Message- > From: Colin Law [mailto:clan...@gmail.com] > Sent: Friday, March 2, 2018 3:57 PM > To: David Dutra > Cc: gnucash-user > Subject: Re: GnuCash 2.6.7 question > > Can you enter it again and do a screenshot before hitting enter? Post it > here. > > Colin > > On 2 March 2018 at 20:52, David Dutra wrote: >> Thanks, but I have done that and scrolled up the whole list of transactions >> - it's not there. >> >> >> >> -Original Message- >> From: gnucash-user >> [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On >> Behalf Of Colin Law >> Sent: Friday, March 2, 2018 3:35 PM >> Cc: gnucash-user >> Subject: Re: GnuCash 2.6.7 question >> >> Also you can use the search feature to search for the lost transaction. >> >> Colin >> >> On 2 March 2018 at 19:38, Evan Van Dyke wrote: >>> This will sound like a stupid response, but it’s happened to me a >>> bunch… >>> >>> Are you 100% sure you have the date right on the transaction when you enter >>> it? I’ve had this happen too many times when I enter just the month/day >>> on a transaction, and GnuCash puts in last year’s year for some reason… >>> causing the new transaction to jump up off the top of the screen when I hit >>> “Enter” to create the transaction. Most common around the end of the year >>> (for me), and you say you’re coming back to the DB after time off, so it >>> might just be “helping” you in an incorrect fashion. >>> >>> The fact that it auto-fills when you try to re-enter it suggests that the >>> Tx is in your ledger somewhere. If you’ve been clearing/reconciling your >>> transactions, you can probably find it fast by scrolling up and looking for >>> a Tx in the cleared section of your ledger which says “n” in that column. >>> >>> —Evan >>> >>>> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >>>> >>>> Hello, >>>> >>>> >>>> >>>> I'm very much a newbie and I'd appreciate some help. I used GnuCash >>>> last year for our small nonprofit to keep track of income and >>>> expenses based on transactions through our check book. I figured out >>>> how to use it for simple and split transactions last year and it >>>> worked fine. I haven't used it since and when I tried to carry on >>>> where I left off a year ago, I encountered a problem. >>>> >>>> >>>> >>>> I set up a payment and split it into its two expense components - no >>>> problem. I hit Enter, but instead of entering that transaction and >>>> moving to the next line for the next entry, my transaction >>>> disappeared from view and all that was left was the date. However, >>>> when I began to enter it again beginning in the Memo column, the >>>> whole transaction reappeared with the correct amounts and splits. >>>> Hit Enter, and the same thing happened - line disappeared except for >>>> the date. Same thing happened when I clicked on the Enter button on the >>>> menu rather than hitting Enter on the keyboard. >>>> >>>> >>>> >>>> Not sure why I was able to figure it out a year ago, but having >>>> issues now, but I'm assuming I'm making some simple mistake. Can anyone >>>> help me out?? >>>> >>>> >>>> >>>> Thanks, >>>> >>>> David >>>> >>>> ___ >>>> gnucash-user mailing list >>>> gnucash-user@gnucash.org >>>> To update your subscription prefer
Re: GnuCash 2.6.7 question
Another item to check is the Edit >Preferences >Date/Time >Date Completion setting. You may prefer to change it. David C On Fri, Mar 2, 2018 at 3:43 PM, Colin Law wrote: > Have a look in View > Filter By (from that account) and see if you > have selected a date range to show. > > Colin > > On 2 March 2018 at 21:16, David Dutra wrote: > > Colin, > > > > I've attached a screen shot. Everything is fine through the transaction > dated 2/25/2017 that I entered a year ago. Today I wanted to pick up with > the first transaction of the new fiscal year which was a cash payment of > $1,550 dated 3/3/2017 that was split between $1,500 for salary and $50 for > expenses. I believe the way it's shown on the screen is the way it should > look. The problem is, if I hit Enter (either by hitting the key or clicking > on the menu), the transaction is no longer there - or anywhere else on the > whole ledger - but if I start to input it again, it all comes back, > properly split. > > > > D > > > > -Original Message- > > From: Colin Law [mailto:clan...@gmail.com] > > Sent: Friday, March 2, 2018 3:57 PM > > To: David Dutra > > Cc: gnucash-user > > Subject: Re: GnuCash 2.6.7 question > > > > Can you enter it again and do a screenshot before hitting enter? Post > it here. > > > > Colin > > > > On 2 March 2018 at 20:52, David Dutra wrote: > >> Thanks, but I have done that and scrolled up the whole list of > transactions - it's not there. > >> > >> > >> > >> -Original Message- > >> From: gnucash-user > >> [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On > >> Behalf Of Colin Law > >> Sent: Friday, March 2, 2018 3:35 PM > >> Cc: gnucash-user > >> Subject: Re: GnuCash 2.6.7 question > >> > >> Also you can use the search feature to search for the lost transaction. > >> > >> Colin > >> > >> On 2 March 2018 at 19:38, Evan Van Dyke wrote: > >>> This will sound like a stupid response, but it’s happened to me a > >>> bunch… > >>> > >>> Are you 100% sure you have the date right on the transaction when you > enter it? I’ve had this happen too many times when I enter just the > month/day on a transaction, and GnuCash puts in last year’s year for some > reason… causing the new transaction to jump up off the top of the screen > when I hit “Enter” to create the transaction. Most common around the end > of the year (for me), and you say you’re coming back to the DB after time > off, so it might just be “helping” you in an incorrect fashion. > >>> > >>> The fact that it auto-fills when you try to re-enter it suggests that > the Tx is in your ledger somewhere. If you’ve been clearing/reconciling > your transactions, you can probably find it fast by scrolling up and > looking for a Tx in the cleared section of your ledger which says “n” in > that column. > >>> > >>> —Evan > >>> > >>>> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: > >>>> > >>>> Hello, > >>>> > >>>> > >>>> > >>>> I'm very much a newbie and I'd appreciate some help. I used GnuCash > >>>> last year for our small nonprofit to keep track of income and > >>>> expenses based on transactions through our check book. I figured out > >>>> how to use it for simple and split transactions last year and it > >>>> worked fine. I haven't used it since and when I tried to carry on > >>>> where I left off a year ago, I encountered a problem. > >>>> > >>>> > >>>> > >>>> I set up a payment and split it into its two expense components - no > >>>> problem. I hit Enter, but instead of entering that transaction and > >>>> moving to the next line for the next entry, my transaction > >>>> disappeared from view and all that was left was the date. However, > >>>> when I began to enter it again beginning in the Memo column, the > >>>> whole transaction reappeared with the correct amounts and splits. > >>>> Hit Enter, and the same thing happened - line disappeared except for > >>>> the date. Same thing happened when I clicked on the Enter button on > the menu rather than hitting Enter on the keyboard. > >>>> > >>>> > >>>> > >>>> Not sure why I was able to figure it out a year ago, b
Re: GnuCash 2.6.7 question
Hello, Liking at the screen shot, I can see that you are able to view other transactions from that time frame (so it's not that the transaction date is causing it to disappear). The one thing we can't tell room the screen shot is whether any of the splits in your transaction are actually assigned to the current checking account. If none of your splits are assigned to the checking account, then the transaction will disappear from this register the moment you press enter, since there is nothing in the transaction to bind it to this one. David T. On March 3, 2018, at 1:53 AM, David Dutra wrote: Thanks, but I have done that and scrolled up the whole list of transactions - it's not there. -Original Message- From: gnucash-user [mailto:gnucash-user-bounces+ddutra=nycap.rr@gnucash.org] On Behalf Of Colin Law Sent: Friday, March 2, 2018 3:35 PM Cc: gnucash-user Subject: Re: GnuCash 2.6.7 question Also you can use the search feature to search for the lost transaction. Colin On 2 March 2018 at 19:38, Evan Van Dyke wrote: > This will sound like a stupid response, but it’s happened to me a > bunch… > > Are you 100% sure you have the date right on the transaction when you enter > it? I’ve had this happen too many times when I enter just the month/day on > a transaction, and GnuCash puts in last year’s year for some reason… causing > the new transaction to jump up off the top of the screen when I hit “Enter” > to create the transaction. Most common around the end of the year (for me), > and you say you’re coming back to the DB after time off, so it might just be > “helping” you in an incorrect fashion. > > The fact that it auto-fills when you try to re-enter it suggests that the Tx > is in your ledger somewhere. If you’ve been clearing/reconciling your > transactions, you can probably find it fast by scrolling up and looking for a > Tx in the cleared section of your ledger which says “n” in that column. > > —Evan > >> On Mar 2, 2018, at 1:26 PM, David Dutra wrote: >> >> Hello, >> >> >> >> I'm very much a newbie and I'd appreciate some help. I used GnuCash >> last year for our small nonprofit to keep track of income and >> expenses based on transactions through our check book. I figured out >> how to use it for simple and split transactions last year and it >> worked fine. I haven't used it since and when I tried to carry on >> where I left off a year ago, I encountered a problem. >> >> >> >> I set up a payment and split it into its two expense components - no >> problem. I hit Enter, but instead of entering that transaction and >> moving to the next line for the next entry, my transaction >> disappeared from view and all that was left was the date. However, >> when I began to enter it again beginning in the Memo column, the >> whole transaction reappeared with the correct amounts and splits. Hit >> Enter, and the same thing happened - line disappeared except for the >> date. Same thing happened when I clicked on the Enter button on the menu >> rather than hitting Enter on the keyboard. >> >> >> >> Not sure why I was able to figure it out a year ago, but having >> issues now, but I'm assuming I'm making some simple mistake. Can anyone help >> me out?? >> >> >> >> Thanks, >> >> David >> >> ___ >> gnucash-user mailing list >> gnucash-user@gnucash.org >> To update your subscription preferences or to unsubscribe: >> https://lists.gnucash.org/mailman/listinfo/gnucash-user >> If you are using Nabble or Gmane, please see >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. >> - >> Please remember to CC this list on all your replies. >> You can do this by using Reply-To-List or Reply-All. > > ___ > gnucash-user mailing list > gnucash-user@gnucash.org > To update your subscription preferences or to unsubscribe: > https://lists.gnucash.org/mailman/listinfo/gnucash-user > If you are using Nabble or Gmane, please see > https://wiki.gnucash.org/wiki/Mailing_Lists for more information. > - > Please remember to CC this list on all your replies. > You can do this by using Reply-To-List or Reply-All. ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this l
Re: GnuCash 2.6.7 question
Continuing on that line of thought, it should be possible to use the tool called General Ledger or General Journal depending on which version you are using to find the missing transaction. You will probably need to open View > Filter By > Date to extend the starting date of the view back to around late Feb 2017. If the transaction was saved to the book you should find it there. David C ___ gnucash-user mailing list gnucash-user@gnucash.org To update your subscription preferences or to unsubscribe: https://lists.gnucash.org/mailman/listinfo/gnucash-user If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information. - Please remember to CC this list on all your replies. You can do this by using Reply-To-List or Reply-All.