[Group.of.nepali.translators] [Bug 1742090] Re: Redpine: Wifi/BT not functioning after s3 resume
** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1742090 Title: Redpine: Wifi/BT not functioning after s3 resume Status in HWE Next: Fix Released Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Released Bug description: System cannot be waked by wowlan, but sometimes works. When the wowlan not works and system waked by other wakeup sources, after resume the wifi and BT would not functioning until reload driver. The driver/FW info: [ 395.217187] ven_rsi_91x: RSI Version Info == [ 395.217188] ven_rsi_91x: [ 395.217192] ven_rsi_91x: FW Version : 1.5.4 [ 395.217198] ven_rsi_91x: Driver Version : RS9113.NB0.NL.GNU.LNX.1.2 [ 395.217200] ven_rsi_91x: Operating mode : 13 [Wi-Fi STA + BT DUAL] [ 395.217201] ven_rsi_91x: Firmware file : RS9113_WLAN_BT_DUAL_MODE.rps [ 395.217202] ven_rsi_91x: Kernel version: 4.4.0-98-generic Kernel snap: caracalla-kernel version:4.4.0-98.121-1 revision:58 BIOS version: 01.00.05 (Also tested with 01.00.03) Tested SKU: T, Media, GPA The reproduce steps: 1. Enable Wowlan and Wol in BIOS 2. Boot up Ubuntu core 3. Connect to Wifi AP $ nmcli d wifi connect password 4. Enable wowlan $ sudo iw phy phy0 wowlan enable magic-packet 5. Enter suspend or hibernate $ sudo systemctl suspend or $ sudo systemctl hibernate 6. Send wake signal from another machine # wakeonlan or # sudo etherwake 7. If system not waked, try to wol or other wake source # wakeonlan 8. After resume, check the wifi/BT function, but not functioning. $ nmcli dev DEVICE TYPE STATE CONNECTION eth0 ethernet connected Wired connection 1 wlan0 wifi disconnected -- eth1 ethernet unavailable -- cdc-wdm0 gsm unavailable -- lo loopback unmanaged -- $ nmcli dev wifi rescan $ nmcli dev wfii list No wifi APs found $ sudo bluetoothctl [NEW] Controller 00:23:A7:EA:65:64 0225399 [default] [bluetooth]# power on Failed to set power on: org.bluez.Error.Failed The not functioning issue can be fixed by reload driver. Also hibernate wakeup fails, and wake by other wake source. The Wifi/BT still functioning which could be the FW is reloaded by driver. This bug is only for tracking purporse, please do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1742090/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp
[Group.of.nepali.translators] [Bug 1742090] Re: Redpine: Wifi/BT not functioning after s3 resume
** Changed in: hwe-next Status: New => Fix Released -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1742090 Title: Redpine: Wifi/BT not functioning after s3 resume Status in HWE Next: Fix Released Status in linux package in Ubuntu: Confirmed Status in linux source package in Xenial: Fix Released Bug description: System cannot be waked by wowlan, but sometimes works. When the wowlan not works and system waked by other wakeup sources, after resume the wifi and BT would not functioning until reload driver. The driver/FW info: [ 395.217187] ven_rsi_91x: RSI Version Info == [ 395.217188] ven_rsi_91x: [ 395.217192] ven_rsi_91x: FW Version : 1.5.4 [ 395.217198] ven_rsi_91x: Driver Version : RS9113.NB0.NL.GNU.LNX.1.2 [ 395.217200] ven_rsi_91x: Operating mode : 13 [Wi-Fi STA + BT DUAL] [ 395.217201] ven_rsi_91x: Firmware file : RS9113_WLAN_BT_DUAL_MODE.rps [ 395.217202] ven_rsi_91x: Kernel version: 4.4.0-98-generic Kernel snap: caracalla-kernel version:4.4.0-98.121-1 revision:58 BIOS version: 01.00.05 (Also tested with 01.00.03) Tested SKU: T, Media, GPA The reproduce steps: 1. Enable Wowlan and Wol in BIOS 2. Boot up Ubuntu core 3. Connect to Wifi AP $ nmcli d wifi connect password 4. Enable wowlan $ sudo iw phy phy0 wowlan enable magic-packet 5. Enter suspend or hibernate $ sudo systemctl suspend or $ sudo systemctl hibernate 6. Send wake signal from another machine # wakeonlan or # sudo etherwake 7. If system not waked, try to wol or other wake source # wakeonlan 8. After resume, check the wifi/BT function, but not functioning. $ nmcli dev DEVICE TYPE STATE CONNECTION eth0 ethernet connected Wired connection 1 wlan0 wifi disconnected -- eth1 ethernet unavailable -- cdc-wdm0 gsm unavailable -- lo loopback unmanaged -- $ nmcli dev wifi rescan $ nmcli dev wfii list No wifi APs found $ sudo bluetoothctl [NEW] Controller 00:23:A7:EA:65:64 0225399 [default] [bluetooth]# power on Failed to set power on: org.bluez.Error.Failed The not functioning issue can be fixed by reload driver. Also hibernate wakeup fails, and wake by other wake source. The Wifi/BT still functioning which could be the FW is reloaded by driver. This bug is only for tracking purporse, please do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1742090/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp
[Group.of.nepali.translators] [Bug 1742090] Re: Redpine: Wifi/BT not functioning after s3 resume
This bug was fixed in the package linux - 4.4.0-119.143 --- linux (4.4.0-119.143) xenial; urgency=medium * linux: 4.4.0-119.143 -proposed tracker (LP: #1760327) * Dell XPS 13 9360 bluetooth scan can not detect any device (LP: #1759821) - Revert "Bluetooth: btusb: fix QCA Rome suspend/resume" linux (4.4.0-118.142) xenial; urgency=medium * linux: 4.4.0-118.142 -proposed tracker (LP: #1759607) * Kernel panic with AWS 4.4.0-1053 / 4.4.0-1015 (Trusty) (LP: #1758869) - x86/microcode/AMD: Do not load when running on a hypervisor * CVE-2018-8043 - net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe() linux (4.4.0-117.141) xenial; urgency=medium * linux: 4.4.0-117.141 -proposed tracker (LP: #1755208) * Xenial update to 4.4.114 stable release (LP: #1754592) - x86/asm/32: Make sync_core() handle missing CPUID on all 32-bit kernels - usbip: prevent vhci_hcd driver from leaking a socket pointer address - usbip: Fix implicit fallthrough warning - usbip: Fix potential format overflow in userspace tools - x86/microcode/intel: Fix BDW late-loading revision check - x86/retpoline: Fill RSB on context switch for affected CPUs - sched/deadline: Use the revised wakeup rule for suspending constrained dl tasks - can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once - can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once - PM / sleep: declare __tracedata symbols as char[] rather than char - time: Avoid undefined behaviour in ktime_add_safe() - timers: Plug locking race vs. timer migration - Prevent timer value 0 for MWAITX - drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled - drivers: base: cacheinfo: fix boot error message when acpi is enabled - PCI: layerscape: Add "fsl,ls2085a-pcie" compatible ID - PCI: layerscape: Fix MSG TLP drop setting - mmc: sdhci-of-esdhc: add/remove some quirks according to vendor version - fs/select: add vmalloc fallback for select(2) - hwpoison, memcg: forcibly uncharge LRU pages - cma: fix calculation of aligned offset - mm, page_alloc: fix potential false positive in __zone_watermark_ok - ipc: msg, make msgrcv work with LONG_MIN - x86/ioapic: Fix incorrect pointers in ioapic_setup_resources() - ACPI / processor: Avoid reserving IO regions too early - ACPI / scan: Prefer devices without _HID/_CID for _ADR matching - ACPICA: Namespace: fix operand cache leak - netfilter: x_tables: speed up jump target validation - netfilter: arp_tables: fix invoking 32bit "iptable -P INPUT ACCEPT" failed in 64bit kernel - netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags - netfilter: nf_ct_expect: remove the redundant slash when policy name is empty - netfilter: nfnetlink_queue: reject verdict request from different portid - netfilter: restart search if moved to other chain - netfilter: nf_conntrack_sip: extend request line validation - netfilter: use fwmark_reflect in nf_send_reset - ext2: Don't clear SGID when inheriting ACLs - reiserfs: fix race in prealloc discard - reiserfs: don't preallocate blocks for extended attributes - reiserfs: Don't clear SGID when inheriting ACLs - fs/fcntl: f_setown, avoid undefined behaviour - scsi: libiscsi: fix shifting of DID_REQUEUE host byte - Input: trackpoint - force 3 buttons if 0 button is reported - usb: usbip: Fix possible deadlocks reported by lockdep - usbip: fix stub_rx: get_pipe() to validate endpoint number - usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input - usbip: prevent leaking socket pointer address in messages - um: link vmlinux with -no-pie - vsyscall: Fix permissions for emulate mode with KAISER/PTI - eventpoll.h: add missing epoll event masks - x86/microcode/intel: Extend BDW late-loading further with LLC size check - hrtimer: Reset hrtimer cpu base proper on CPU hotplug - dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state - ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL - ipv6: fix udpv6 sendmsg crash caused by too small MTU - ipv6: ip6_make_skb() needs to clear cork.base.dst - lan78xx: Fix failure in USB Full Speed - net: igmp: fix source address check for IGMPv3 reports - tcp: __tcp_hdrlen() helper - net: qdisc_pkt_len_init() should be more robust - pppoe: take ->needed_headroom of lower device into account on xmit - r8169: fix memory corruption on retrieval of hardware statistics. - sctp: do not allow the v4 socket to bind a v4mapped v6 address - sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf - vmxnet3: repair memory leak - net: Allow neigh contructor functions ability to modify the primary_key - ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY
[Group.of.nepali.translators] [Bug 1742090] Re: Redpine: Wifi/BT not functioning after s3 resume
** Also affects: linux (Ubuntu Xenial) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Xenial) Status: New => Confirmed ** Changed in: linux (Ubuntu Xenial) Importance: Undecided => Critical -- You received this bug notification because you are a member of नेपाली भाषा समायोजकहरुको समूह, which is subscribed to Xenial. Matching subscriptions: Ubuntu 16.04 Bugs https://bugs.launchpad.net/bugs/1742090 Title: Redpine: Wifi/BT not functioning after s3 resume Status in HWE Next: New Status in linux package in Ubuntu: Confirmed Status in linux source package in Xenial: Confirmed Bug description: System cannot be waked by wowlan, but sometimes works. When the wowlan not works and system waked by other wakeup sources, after resume the wifi and BT would not functioning until reload driver. The driver/FW info: [ 395.217187] ven_rsi_91x: RSI Version Info == [ 395.217188] ven_rsi_91x: [ 395.217192] ven_rsi_91x: FW Version : 1.5.4 [ 395.217198] ven_rsi_91x: Driver Version : RS9113.NB0.NL.GNU.LNX.1.2 [ 395.217200] ven_rsi_91x: Operating mode : 13 [Wi-Fi STA + BT DUAL] [ 395.217201] ven_rsi_91x: Firmware file : RS9113_WLAN_BT_DUAL_MODE.rps [ 395.217202] ven_rsi_91x: Kernel version: 4.4.0-98-generic Kernel snap: caracalla-kernel version:4.4.0-98.121-1 revision:58 BIOS version: 01.00.05 (Also tested with 01.00.03) Tested SKU: T, Media, GPA The reproduce steps: 1. Enable Wowlan and Wol in BIOS 2. Boot up Ubuntu core 3. Connect to Wifi AP $ nmcli d wifi connect password 4. Enable wowlan $ sudo iw phy phy0 wowlan enable magic-packet 5. Enter suspend or hibernate $ sudo systemctl suspend or $ sudo systemctl hibernate 6. Send wake signal from another machine # wakeonlan or # sudo etherwake 7. If system not waked, try to wol or other wake source # wakeonlan 8. After resume, check the wifi/BT function, but not functioning. $ nmcli dev DEVICE TYPE STATE CONNECTION eth0 ethernet connected Wired connection 1 wlan0 wifi disconnected -- eth1 ethernet unavailable -- cdc-wdm0 gsm unavailable -- lo loopback unmanaged -- $ nmcli dev wifi rescan $ nmcli dev wfii list No wifi APs found $ sudo bluetoothctl [NEW] Controller 00:23:A7:EA:65:64 0225399 [default] [bluetooth]# power on Failed to set power on: org.bluez.Error.Failed The not functioning issue can be fixed by reload driver. Also hibernate wakeup fails, and wake by other wake source. The Wifi/BT still functioning which could be the FW is reloaded by driver. This bug is only for tracking purporse, please do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1742090/+subscriptions ___ Mailing list: https://launchpad.net/~group.of.nepali.translators Post to : group.of.nepali.translators@lists.launchpad.net Unsubscribe : https://launchpad.net/~group.of.nepali.translators More help : https://help.launchpad.net/ListHelp