Re: [Intel-gfx] [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits.
>-Original Message- >From: Ville Syrjälä [mailto:ville.syrj...@linux.intel.com] >Sent: Friday, November 2, 2018 4:16 AM >To: Srivatsa, Anusha >Cc: intel-gfx@lists.freedesktop.org; Singh, Gaurav K >; >Jani Nikula ; Navare, Manasi D > >Subject: Re: [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits. > >On Wed, Oct 31, 2018 at 10:34:31PM +, Srivatsa, Anusha wrote: >> >> >> >-Original Message- >> >From: Ville Syrjälä [mailto:ville.syrj...@linux.intel.com] >> >Sent: Wednesday, October 31, 2018 2:08 PM >> >To: Srivatsa, Anusha >> >Cc: intel-gfx@lists.freedesktop.org; Singh, Gaurav K >> >; Jani Nikula >> >; Navare, Manasi D >> > >> >Subject: Re: [v4 6/7] i915/dp/fec: Configure the Forward Error Correction >> >bits. >> > >> >On Tue, Oct 30, 2018 at 05:45:16PM -0700, Anusha Srivatsa wrote: >> >> If FEC is supported, the corresponding DP_TP_CTL register bits have >> >> to be configured. >> >> >> >> The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register >> >> and wait till FEC_STATUS in DP_TP_CTL[28] is 1. >> >> Also add the warn message to make sure that the control register is >> >> already active while enabling FEC. >> >> >> >> v2: >> >> - Change commit message. Configure fec state after >> >> link training (Manasi, Gaurav) >> >> - Remove redundent checks (Manasi) >> >> - Remove the registers that get added automagically (Anusha) >> >> >> >> v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) >> >> >> >> v4: rebased. >> >> >> >> v5: >> >> - Move the code to the proper spot, according to spec.(Ville) >> >> - Use fec state as a check too. >> >> >> >> Cc: Gaurav K Singh >> >> Cc: Jani Nikula >> >> Cc: Ville Syrjala >> >> Cc: Manasi Navare >> >> Signed-off-by: Anusha Srivatsa >> >> --- >> >> drivers/gpu/drm/i915/i915_reg.h | 2 ++ >> >> drivers/gpu/drm/i915/intel_ddi.c | 30 >> >> ++ drivers/gpu/drm/i915/intel_drv.h | >> >> 2 ++ >> >> 3 files changed, 34 insertions(+) >> >> >> >> diff --git a/drivers/gpu/drm/i915/i915_reg.h >> >> b/drivers/gpu/drm/i915/i915_reg.h index e85f53cb9cdd..8b1753939299 >> >> 100644 >> >> --- a/drivers/gpu/drm/i915/i915_reg.h >> >> +++ b/drivers/gpu/drm/i915/i915_reg.h >> >> @@ -9134,6 +9134,7 @@ enum skl_power_gate { >> >> #define _DP_TP_CTL_B 0x64140 >> >> #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, >_DP_TP_CTL_B) >> >> #define DP_TP_CTL_ENABLE(1 << 31) >> >> +#define DP_TP_CTL_FEC_ENABLE(1 << 30) >> >> #define DP_TP_CTL_MODE_SST (0 << 27) >> >> #define DP_TP_CTL_MODE_MST (1 << 27) >> >> #define DP_TP_CTL_FORCE_ACT (1 << 25) >> >> @@ -9152,6 +9153,7 @@ enum skl_power_gate { >> >> #define _DP_TP_STATUS_A 0x64044 >> >> #define _DP_TP_STATUS_B 0x64144 >> >> #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, >> >> _DP_TP_STATUS_B) >> >> +#define DP_TP_STATUS_FEC_ENABLE_LIVE(1 << 28) >> >> #define DP_TP_STATUS_IDLE_DONE (1 << 25) >> >> #define DP_TP_STATUS_ACT_SENT (1 << 24) >> >> #define DP_TP_STATUS_MODE_STATUS_MST(1 << 23) >> >> diff --git a/drivers/gpu/drm/i915/intel_ddi.c >> >> b/drivers/gpu/drm/i915/intel_ddi.c >> >> index efbada95dc4e..f03f44f332c7 100644 >> >> --- a/drivers/gpu/drm/i915/intel_ddi.c >> >> +++ b/drivers/gpu/drm/i915/intel_ddi.c >> >> @@ -2889,6 +2889,32 @@ static void intel_ddi_clk_disable(struct >> >intel_encoder *encoder) >> >> } >> >> } >> >> >> >> +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, >> >> +const struct intel_crtc_state *crtc_state) >> > >> >Can be static. intel_ddi_enable_fec() seems like a better name, and >> >we can just pass the intel_encoder to this I think. No need to do all the >"intel_dp to encoder" >> >gynmastics then. >> intel_ddi_enable_fec() is a better name. >> >> >> +{ >> >> + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); >> >> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); >> >> + enum port port = intel_dig_port->base.port; >> >> + u32 val; >> >> + >> >> + /* FEC support exists for DP 1.4 only */ >> > >> >This comment is misleading. There are other reasons besides < DP 1.4 >> >for not using FEC. IMO just drop the comment. >> >> Ok. >> >> >> + if (!crtc_state->fec_enable) >> >> + return; >> >> + >> >> + if (!crtc_state->dsc_params.compression_enable) >> >> + return; >> > >> >That check can be removed now. >> No we will still need this. The fec_enable state is not coupled with >> compression. >So we have to check fec state and the compression >> > >Either we enable/disable fec or not. Whatever linkage with DSC only exists in >compute_config(). True, I have changed this in v5. Anusha >> Anusha >> >> + >> >> + val = I915_READ(DP_TP_CTL(port)); >> >> + val |= DP_TP_CTL_FEC_ENABLE; >> >> + I9
Re: [Intel-gfx] [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits.
On Wed, Oct 31, 2018 at 10:34:31PM +, Srivatsa, Anusha wrote: > > > >-Original Message- > >From: Ville Syrjälä [mailto:ville.syrj...@linux.intel.com] > >Sent: Wednesday, October 31, 2018 2:08 PM > >To: Srivatsa, Anusha > >Cc: intel-gfx@lists.freedesktop.org; Singh, Gaurav K > >; > >Jani Nikula ; Navare, Manasi D > > > >Subject: Re: [v4 6/7] i915/dp/fec: Configure the Forward Error Correction > >bits. > > > >On Tue, Oct 30, 2018 at 05:45:16PM -0700, Anusha Srivatsa wrote: > >> If FEC is supported, the corresponding DP_TP_CTL register bits have to > >> be configured. > >> > >> The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register and > >> wait till FEC_STATUS in DP_TP_CTL[28] is 1. > >> Also add the warn message to make sure that the control register is > >> already active while enabling FEC. > >> > >> v2: > >> - Change commit message. Configure fec state after > >> link training (Manasi, Gaurav) > >> - Remove redundent checks (Manasi) > >> - Remove the registers that get added automagically (Anusha) > >> > >> v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) > >> > >> v4: rebased. > >> > >> v5: > >> - Move the code to the proper spot, according to spec.(Ville) > >> - Use fec state as a check too. > >> > >> Cc: Gaurav K Singh > >> Cc: Jani Nikula > >> Cc: Ville Syrjala > >> Cc: Manasi Navare > >> Signed-off-by: Anusha Srivatsa > >> --- > >> drivers/gpu/drm/i915/i915_reg.h | 2 ++ > >> drivers/gpu/drm/i915/intel_ddi.c | 30 ++ > >> drivers/gpu/drm/i915/intel_drv.h | 2 ++ > >> 3 files changed, 34 insertions(+) > >> > >> diff --git a/drivers/gpu/drm/i915/i915_reg.h > >> b/drivers/gpu/drm/i915/i915_reg.h index e85f53cb9cdd..8b1753939299 > >> 100644 > >> --- a/drivers/gpu/drm/i915/i915_reg.h > >> +++ b/drivers/gpu/drm/i915/i915_reg.h > >> @@ -9134,6 +9134,7 @@ enum skl_power_gate { > >> #define _DP_TP_CTL_B 0x64140 > >> #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B) > >> #define DP_TP_CTL_ENABLE (1 << 31) > >> +#define DP_TP_CTL_FEC_ENABLE (1 << 30) > >> #define DP_TP_CTL_MODE_SST (0 << 27) > >> #define DP_TP_CTL_MODE_MST (1 << 27) > >> #define DP_TP_CTL_FORCE_ACT (1 << 25) > >> @@ -9152,6 +9153,7 @@ enum skl_power_gate { > >> #define _DP_TP_STATUS_A 0x64044 > >> #define _DP_TP_STATUS_B 0x64144 > >> #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, > >> _DP_TP_STATUS_B) > >> +#define DP_TP_STATUS_FEC_ENABLE_LIVE (1 << 28) > >> #define DP_TP_STATUS_IDLE_DONE (1 << 25) > >> #define DP_TP_STATUS_ACT_SENT(1 << 24) > >> #define DP_TP_STATUS_MODE_STATUS_MST (1 << 23) > >> diff --git a/drivers/gpu/drm/i915/intel_ddi.c > >> b/drivers/gpu/drm/i915/intel_ddi.c > >> index efbada95dc4e..f03f44f332c7 100644 > >> --- a/drivers/gpu/drm/i915/intel_ddi.c > >> +++ b/drivers/gpu/drm/i915/intel_ddi.c > >> @@ -2889,6 +2889,32 @@ static void intel_ddi_clk_disable(struct > >intel_encoder *encoder) > >>} > >> } > >> > >> +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, > >> + const struct intel_crtc_state *crtc_state) > > > >Can be static. intel_ddi_enable_fec() seems like a better name, and we can > >just > >pass the intel_encoder to this I think. No need to do all the "intel_dp to > >encoder" > >gynmastics then. > intel_ddi_enable_fec() is a better name. > > >> +{ > >> + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); > >> + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); > >> + enum port port = intel_dig_port->base.port; > >> + u32 val; > >> + > >> + /* FEC support exists for DP 1.4 only */ > > > >This comment is misleading. There are other reasons besides < DP 1.4 for not > >using FEC. IMO just drop the comment. > > Ok. > > >> + if (!crtc_state->fec_enable) > >> + return; > >> + > >> + if (!crtc_state->dsc_params.compression_enable) > >> + return; > > > >That check can be removed now. > No we will still need this. The fec_enable state is not coupled with > compression. So we have to check fec state and the compression > Either we enable/disable fec or not. Whatever linkage with DSC only exists in compute_config(). > Anusha > >> + > >> + val = I915_READ(DP_TP_CTL(port)); > >> + val |= DP_TP_CTL_FEC_ENABLE; > >> + I915_WRITE(DP_TP_CTL(port), val); > >> + > >> + if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port), > >> + DP_TP_STATUS_FEC_ENABLE_LIVE, > >> + DP_TP_STATUS_FEC_ENABLE_LIVE, > >> + 1)) > >> + DRM_ERROR("Timed out waiting for FEC Enable Status\n"); } > >> + > >> static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, > >>
Re: [Intel-gfx] [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits.
>-Original Message- >From: Ville Syrjälä [mailto:ville.syrj...@linux.intel.com] >Sent: Wednesday, October 31, 2018 2:08 PM >To: Srivatsa, Anusha >Cc: intel-gfx@lists.freedesktop.org; Singh, Gaurav K >; >Jani Nikula ; Navare, Manasi D > >Subject: Re: [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits. > >On Tue, Oct 30, 2018 at 05:45:16PM -0700, Anusha Srivatsa wrote: >> If FEC is supported, the corresponding DP_TP_CTL register bits have to >> be configured. >> >> The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register and >> wait till FEC_STATUS in DP_TP_CTL[28] is 1. >> Also add the warn message to make sure that the control register is >> already active while enabling FEC. >> >> v2: >> - Change commit message. Configure fec state after >> link training (Manasi, Gaurav) >> - Remove redundent checks (Manasi) >> - Remove the registers that get added automagically (Anusha) >> >> v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) >> >> v4: rebased. >> >> v5: >> - Move the code to the proper spot, according to spec.(Ville) >> - Use fec state as a check too. >> >> Cc: Gaurav K Singh >> Cc: Jani Nikula >> Cc: Ville Syrjala >> Cc: Manasi Navare >> Signed-off-by: Anusha Srivatsa >> --- >> drivers/gpu/drm/i915/i915_reg.h | 2 ++ >> drivers/gpu/drm/i915/intel_ddi.c | 30 ++ >> drivers/gpu/drm/i915/intel_drv.h | 2 ++ >> 3 files changed, 34 insertions(+) >> >> diff --git a/drivers/gpu/drm/i915/i915_reg.h >> b/drivers/gpu/drm/i915/i915_reg.h index e85f53cb9cdd..8b1753939299 >> 100644 >> --- a/drivers/gpu/drm/i915/i915_reg.h >> +++ b/drivers/gpu/drm/i915/i915_reg.h >> @@ -9134,6 +9134,7 @@ enum skl_power_gate { >> #define _DP_TP_CTL_B0x64140 >> #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B) >> #define DP_TP_CTL_ENABLE (1 << 31) >> +#define DP_TP_CTL_FEC_ENABLE (1 << 30) >> #define DP_TP_CTL_MODE_SST (0 << 27) >> #define DP_TP_CTL_MODE_MST (1 << 27) >> #define DP_TP_CTL_FORCE_ACT(1 << 25) >> @@ -9152,6 +9153,7 @@ enum skl_power_gate { >> #define _DP_TP_STATUS_A 0x64044 >> #define _DP_TP_STATUS_B 0x64144 >> #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, >> _DP_TP_STATUS_B) >> +#define DP_TP_STATUS_FEC_ENABLE_LIVE (1 << 28) >> #define DP_TP_STATUS_IDLE_DONE (1 << 25) >> #define DP_TP_STATUS_ACT_SENT (1 << 24) >> #define DP_TP_STATUS_MODE_STATUS_MST (1 << 23) >> diff --git a/drivers/gpu/drm/i915/intel_ddi.c >> b/drivers/gpu/drm/i915/intel_ddi.c >> index efbada95dc4e..f03f44f332c7 100644 >> --- a/drivers/gpu/drm/i915/intel_ddi.c >> +++ b/drivers/gpu/drm/i915/intel_ddi.c >> @@ -2889,6 +2889,32 @@ static void intel_ddi_clk_disable(struct >intel_encoder *encoder) >> } >> } >> >> +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, >> + const struct intel_crtc_state *crtc_state) > >Can be static. intel_ddi_enable_fec() seems like a better name, and we can just >pass the intel_encoder to this I think. No need to do all the "intel_dp to >encoder" >gynmastics then. intel_ddi_enable_fec() is a better name. >> +{ >> +struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); >> +struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); >> +enum port port = intel_dig_port->base.port; >> +u32 val; >> + >> +/* FEC support exists for DP 1.4 only */ > >This comment is misleading. There are other reasons besides < DP 1.4 for not >using FEC. IMO just drop the comment. Ok. >> +if (!crtc_state->fec_enable) >> +return; >> + >> +if (!crtc_state->dsc_params.compression_enable) >> +return; > >That check can be removed now. No we will still need this. The fec_enable state is not coupled with compression. So we have to check fec state and the compression Anusha >> + >> +val = I915_READ(DP_TP_CTL(port)); >> +val |= DP_TP_CTL_FEC_ENABLE; >> +I915_WRITE(DP_TP_CTL(port), val); >> + >> +if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port), >> +DP_TP_STATUS_FEC_ENABLE_LIVE, >> +DP_TP_STATUS_FEC_ENABLE_LIVE, >> +1)) >> +DRM_ERROR("Timed out waiting for FEC Enable Status\n"); } >> + >> static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, >> const struct intel_crtc_state *crtc_state, >> const struct drm_connector_state >*conn_state) @@ -2934,9 >> +2960,13 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder >*encoder, >>DP_DECOMPRESSION_EN); >> intel_dp_sink_set_fec_ready(intel_dp, crtc_state, DP_FEC_READY); >>
Re: [Intel-gfx] [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits.
On Tue, Oct 30, 2018 at 05:45:16PM -0700, Anusha Srivatsa wrote: > If FEC is supported, the corresponding > DP_TP_CTL register bits have to be configured. > > The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register > and wait till FEC_STATUS in DP_TP_CTL[28] is 1. > Also add the warn message to make sure that the control > register is already active while enabling FEC. > > v2: > - Change commit message. Configure fec state after > link training (Manasi, Gaurav) > - Remove redundent checks (Manasi) > - Remove the registers that get added automagically (Anusha) > > v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) > > v4: rebased. > > v5: > - Move the code to the proper spot, according to spec.(Ville) > - Use fec state as a check too. > > Cc: Gaurav K Singh > Cc: Jani Nikula > Cc: Ville Syrjala > Cc: Manasi Navare > Signed-off-by: Anusha Srivatsa > --- > drivers/gpu/drm/i915/i915_reg.h | 2 ++ > drivers/gpu/drm/i915/intel_ddi.c | 30 ++ > drivers/gpu/drm/i915/intel_drv.h | 2 ++ > 3 files changed, 34 insertions(+) > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h > index e85f53cb9cdd..8b1753939299 100644 > --- a/drivers/gpu/drm/i915/i915_reg.h > +++ b/drivers/gpu/drm/i915/i915_reg.h > @@ -9134,6 +9134,7 @@ enum skl_power_gate { > #define _DP_TP_CTL_B 0x64140 > #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B) > #define DP_TP_CTL_ENABLE(1 << 31) > +#define DP_TP_CTL_FEC_ENABLE(1 << 30) > #define DP_TP_CTL_MODE_SST (0 << 27) > #define DP_TP_CTL_MODE_MST (1 << 27) > #define DP_TP_CTL_FORCE_ACT (1 << 25) > @@ -9152,6 +9153,7 @@ enum skl_power_gate { > #define _DP_TP_STATUS_A 0x64044 > #define _DP_TP_STATUS_B 0x64144 > #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B) > +#define DP_TP_STATUS_FEC_ENABLE_LIVE(1 << 28) > #define DP_TP_STATUS_IDLE_DONE (1 << 25) > #define DP_TP_STATUS_ACT_SENT (1 << 24) > #define DP_TP_STATUS_MODE_STATUS_MST(1 << 23) > diff --git a/drivers/gpu/drm/i915/intel_ddi.c > b/drivers/gpu/drm/i915/intel_ddi.c > index efbada95dc4e..f03f44f332c7 100644 > --- a/drivers/gpu/drm/i915/intel_ddi.c > +++ b/drivers/gpu/drm/i915/intel_ddi.c > @@ -2889,6 +2889,32 @@ static void intel_ddi_clk_disable(struct intel_encoder > *encoder) > } > } > > +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, > +const struct intel_crtc_state *crtc_state) Can be static. intel_ddi_enable_fec() seems like a better name, and we can just pass the intel_encoder to this I think. No need to do all the "intel_dp to encoder" gynmastics then. > +{ > + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); > + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); > + enum port port = intel_dig_port->base.port; > + u32 val; > + > + /* FEC support exists for DP 1.4 only */ This comment is misleading. There are other reasons besides < DP 1.4 for not using FEC. IMO just drop the comment. > + if (!crtc_state->fec_enable) > + return; > + > + if (!crtc_state->dsc_params.compression_enable) > + return; That check can be removed now. > + > + val = I915_READ(DP_TP_CTL(port)); > + val |= DP_TP_CTL_FEC_ENABLE; > + I915_WRITE(DP_TP_CTL(port), val); > + > + if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port), > + DP_TP_STATUS_FEC_ENABLE_LIVE, > + DP_TP_STATUS_FEC_ENABLE_LIVE, > + 1)) > + DRM_ERROR("Timed out waiting for FEC Enable Status\n"); > +} > + > static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, > const struct intel_crtc_state *crtc_state, > const struct drm_connector_state > *conn_state) > @@ -2934,9 +2960,13 @@ static void intel_ddi_pre_enable_dp(struct > intel_encoder *encoder, > DP_DECOMPRESSION_EN); > intel_dp_sink_set_fec_ready(intel_dp, crtc_state, DP_FEC_READY); > intel_dp_start_link_train(intel_dp); > + Unrelated whitespace change. > if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) > intel_dp_stop_link_train(intel_dp); > > + /* Set FEC state after link training */ Redundant comment. > + intel_dp_enable_fec_state(intel_dp, crtc_state); > + > icl_enable_phy_clock_gating(dig_port); > > if (!is_mst) > diff --git a/drivers/gpu/drm/i915/intel_drv.h > b/drivers/gpu/drm/i915/intel_drv.h > index 2a080205968d..1cdfa9c5da43 100644 > --- a/drivers/gpu/drm/i915/intel_drv.h > +++ b/drivers/gpu/drm/i915/intel_d
[Intel-gfx] [v4 6/7] i915/dp/fec: Configure the Forward Error Correction bits.
If FEC is supported, the corresponding DP_TP_CTL register bits have to be configured. The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register and wait till FEC_STATUS in DP_TP_CTL[28] is 1. Also add the warn message to make sure that the control register is already active while enabling FEC. v2: - Change commit message. Configure fec state after link training (Manasi, Gaurav) - Remove redundent checks (Manasi) - Remove the registers that get added automagically (Anusha) v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav) v4: rebased. v5: - Move the code to the proper spot, according to spec.(Ville) - Use fec state as a check too. Cc: Gaurav K Singh Cc: Jani Nikula Cc: Ville Syrjala Cc: Manasi Navare Signed-off-by: Anusha Srivatsa --- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_ddi.c | 30 ++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ 3 files changed, 34 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index e85f53cb9cdd..8b1753939299 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -9134,6 +9134,7 @@ enum skl_power_gate { #define _DP_TP_CTL_B 0x64140 #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B) #define DP_TP_CTL_ENABLE (1 << 31) +#define DP_TP_CTL_FEC_ENABLE (1 << 30) #define DP_TP_CTL_MODE_SST(0 << 27) #define DP_TP_CTL_MODE_MST(1 << 27) #define DP_TP_CTL_FORCE_ACT (1 << 25) @@ -9152,6 +9153,7 @@ enum skl_power_gate { #define _DP_TP_STATUS_A0x64044 #define _DP_TP_STATUS_B0x64144 #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B) +#define DP_TP_STATUS_FEC_ENABLE_LIVE (1 << 28) #define DP_TP_STATUS_IDLE_DONE(1 << 25) #define DP_TP_STATUS_ACT_SENT (1 << 24) #define DP_TP_STATUS_MODE_STATUS_MST (1 << 23) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index efbada95dc4e..f03f44f332c7 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2889,6 +2889,32 @@ static void intel_ddi_clk_disable(struct intel_encoder *encoder) } } +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); + enum port port = intel_dig_port->base.port; + u32 val; + + /* FEC support exists for DP 1.4 only */ + if (!crtc_state->fec_enable) + return; + + if (!crtc_state->dsc_params.compression_enable) + return; + + val = I915_READ(DP_TP_CTL(port)); + val |= DP_TP_CTL_FEC_ENABLE; + I915_WRITE(DP_TP_CTL(port), val); + + if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port), + DP_TP_STATUS_FEC_ENABLE_LIVE, + DP_TP_STATUS_FEC_ENABLE_LIVE, + 1)) + DRM_ERROR("Timed out waiting for FEC Enable Status\n"); +} + static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state) @@ -2934,9 +2960,13 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, DP_DECOMPRESSION_EN); intel_dp_sink_set_fec_ready(intel_dp, crtc_state, DP_FEC_READY); intel_dp_start_link_train(intel_dp); + if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) intel_dp_stop_link_train(intel_dp); + /* Set FEC state after link training */ + intel_dp_enable_fec_state(intel_dp, crtc_state); + icl_enable_phy_clock_gating(dig_port); if (!is_mst) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 2a080205968d..1cdfa9c5da43 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1799,6 +1799,8 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, int state); +void intel_dp_enable_fec_state(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); void intel_dp_encoder_reset(struct drm_encoder *encoder); void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder); void intel_dp_encoder_destroy(struct drm_encoder *encoder); -- 2.17.1