[Kernel-packages] [Bug 1714178] Re: Triple 4K monitor display failed (modesetting driver limited to 8192x8192)
Update: The patches have been merged to drm-tip: https://cgit.freedesktop.org/drm- tip/commit/?id=1a74fc0b3f49a0603f230b6f087da33bda3d7c66. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1714178 Title: Triple 4K monitor display failed (modesetting driver limited to 8192x8192) Status in DRI: Confirmed Status in X.Org X server: Unknown Status in linux package in Ubuntu: Triaged Status in mesa package in Ubuntu: Fix Released Status in xorg-server package in Ubuntu: Triaged Status in linux source package in Bionic: Confirmed Status in mesa source package in Bionic: Fix Released Status in xorg-server source package in Bionic: Confirmed Bug description: Title: Triple monitor display failed with Dell Dock (HiDPI) (modesetting) Summary: Triple monitor display failed with Dell Dock (HiDPI) (modesetting) Steps: 1. a laptop with Built-in 4K LCD 2. Cold boot system with Dell Dock connected 3. Connect a 4K monitor to Dock 4. Connect 2nd 4K monitor to Dock 5. Go to [All Settings]=>[Displays] to have the following configuration. Resolution: 4kx2k@60Hz (one Built-in LCD + two external monitors) Mirror displays: disable Expected results: Triple monitor display should works without issues Actual results: Triple monitor display failed with Dell Dock Additional information: 1. Linux distribution: Ubuntu 16.04+modesetting, 16.04.3, and 17.04 2. Laptop: Dell Precision 5520 3. Dell Business Thunderbolt Dock - TB16 https://goo.gl/vFDjpi WORKAROUND (UBUNTU 18.04+): Log in to "Ubuntu on Wayland" instead of "Ubuntu". --- .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity DistUpgraded: Fresh install DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-xenial-amd64-20160624-2 DistroCodename: xenial DistroRelease: Ubuntu 16.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:591d] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:07bf] Subsystem: Dell Device [1028:07bf] InstallationDate: Installed on 2017-08-29 (2 days ago) InstallationMedia: Ubuntu 16.04 "Xenial" - Build amd64 LIVE Binary 20160624-10:47 MachineType: Dell Inc. Precision 5520 Package: xorg-server (not installed) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.11.0-14-generic.efi.signed root=UUID=b79ae801-0652-4785-beaf-e8387d798948 ro acpi_rev_override quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.11.0-14.20~16.04.1-generic 4.11.12 Tags: xenial ubuntu compiz-0.9 Uname: Linux 4.11.0-14-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/08/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.3 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.3:bd05/08/2017:svnDellInc.:pnPrecision5520:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.name: Precision 5520 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.7-0ubuntu0.16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.7-0ubuntu0.16.04.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/dri/+bug/1714178/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1927808] Re: rtw88_8821ce causes freeze
How about focal verify result? ODM has run video streaming overnight with 5.14-oem-1015 kernel on TGL device, no hang observed, system still alive the next day. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1927808 Title: rtw88_8821ce causes freeze Status in HWE Next: New Status in linux package in Ubuntu: Confirmed Status in linux-oem-5.13 package in Ubuntu: Invalid Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-oem-5.13 source package in Focal: In Progress Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Impish: Fix Committed Status in linux-oem-5.13 source package in Impish: Invalid Status in linux-oem-5.14 source package in Impish: Invalid Status in linux source package in Jammy: Confirmed Status in linux-oem-5.13 source package in Jammy: Invalid Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: My laptop (Ollee L116HTN6SPW) has a Realtek 8821CE WiFi card. Now at hirsute, this is "supported" in the linux-image-5.11.0-16-generic kernel,and it works "well" for both WiFi and Bluetooth. However, this module (driver) causes frequent freezes, randomly but usually within a few minutes of running (thus very soon after boot): screen display remains frozen, no response to either keyboard or mouse input. All I can do is to hold the power button to power off, then reboot. After reboot, I do not see any crash reports, nor logs about the freeze. Please let me know if I should try to collect some info, and how. For now I use the DKMS module/driver from https://github.com/tomaspinho/rtl8821ce (having blacklisted rtw88_8821ce), and it seems to work perfectly. ProblemType: Bug DistroRelease: Ubuntu 21.04 Package: linux-image-5.11.0-16-generic 5.11.0-16.17 ProcVersionSignature: Ubuntu 5.11.0-16.17-generic 5.11.12 Uname: Linux 5.11.0-16-generic x86_64 ApportVersion: 2.20.11-0ubuntu65 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: psz1189 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME Date: Sat May 8 16:58:19 2021 InstallationDate: Installed on 2021-04-23 (14 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 058f:5608 Alcor Micro Corp. USB 2.0 Camera Bus 001 Device 003: ID 0bda:c821 Realtek Semiconductor Corp. Bluetooth Radio Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Protempo Ltd L116HTN6SPW ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.11.0-16-generic root=UUID=f3700d1b-be99-4cb7-baef-c0f157487c64 ro quiet splash pci=noaer vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-5.11.0-16-generic N/A linux-backports-modules-5.11.0-16-generic N/A linux-firmware 1.197 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/26/2020 dmi.bios.release: 5.12 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: YHSM-BI-11.6-X116AR300-AA55C-195-A dmi.board.asset.tag: Default string dmi.board.name: Default string dmi.board.vendor: Default string dmi.board.version: Default string dmi.chassis.asset.tag: Default string dmi.chassis.type: 10 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.ec.firmware.release: 1.6 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrYHSM-BI-11.6-X116AR300-AA55C-195-A:bd05/26/2020:br5.12:efr1.6:svnProtempoLtd:pnL116HTN6SPW:pvrDefaultstring:rvnDefaultstring:rnDefaultstring:rvrDefaultstring:cvnDefaultstring:ct10:cvrDefaultstring: dmi.product.family: Notebook dmi.product.name: L116HTN6SPW dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Protempo Ltd To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1927808/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
** Tags removed: verification-needed-bionic ** Tags added: verification-failed-bionic -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Fix Committed Status in linux source package in Focal: Fix Committed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1959061] Re: The display output on type-c hub doesn't work on ADL platform
Intel comments: The fix is merged to drm-tip -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1959061 Title: The display output on type-c hub doesn't work on ADL platform Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.14 source package in Focal: In Progress Status in linux source package in Jammy: In Progress Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: [Impact] The display output(DP/HDMI) on the USB type-c hub doesn't work. No display output device could be found after the monitor is plugged into the hub. [Fix] Intel provide a new patch to fix this issue on ADL platforms. [Test] Verified on ADL platform with different type-c hubs, the display output works. [Where problems could occur] The TCSS_DDI_STATUS register is indexed by tc_port not by the FIA port index. So, this patch is more like a fix and only affect ADL platforms. And as the commit log describes, the value is wrong on TC#3/4 ports, so it won't affect the origin working ports. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1959061/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1958850] Re: USB port lost function after unplugging usb drive
@KC, where can I get 1024 kernel? Just checked, not available in proposed yet. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1958850 Title: USB port lost function after unplugging usb drive Status in HWE Next: New Status in OEM Priority Project: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: New Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Jammy: In Progress Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: [Impact] Test the proposed 5.14 oem kernel, and get a failure symptom. Unplug a usb drive from WD19TB docking and a BUG reported in kernel, then the other embedded usb port can't detect usb drive anymore after a while. kernel: usb 5-2.3.3: USB disconnect, device number 5 kernel: BUG: kernel NULL pointer dereference, address: 0030 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: [#1] SMP NOPTI [Fix] 2a19b28f7929) blk-mq: cancel blk-mq dispatch work... is the first regression and it lands mainline since v5.16-rc2. After applied https://lore.kernel.org/all/20210816134624.ga24...@lst.de/#r, issue is gone. the patches has beend landed since v5.15-rc1. [Test Case] 1. plug usb driver on the machine. 2. unplug usb driver. 3. check the dmesg if the oops would be shown [Where problems could occur] Medium ~~~ Test the proposed 5.14 oem kernel, and get a failure symptom. Unplug a usb drive from WD19TB docking and a BUG reported in kernel, then the other embedded usb port can't detect usb drive anymore after a while. kernel: usb 5-2.3.3: USB disconnect, device number 5 kernel: BUG: kernel NULL pointer dereference, address: 0030 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: [#1] SMP NOPTI --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: u 2205 F pulseaudio /dev/snd/controlC0: u 2205 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.10 InstallationDate: Installed on 2021-04-29 (270 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) MachineType: Dell Inc. Precision 5750 NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.14.0-1021-oem root=UUID=834a3a4a-65e5-44ed-8f1a-4bdd2df3cce2 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.14.0-1021.23-oem 5.14.21 RelatedPackageVersions: linux-restricted-modules-5.14.0-1021-oem N/A linux-backports-modules-5.14.0-1021-oem N/A linux-firmware 1.201.3 Tags: impish Uname: Linux 5.14.0-1021-oem x86_64 UpgradeStatus: Upgraded to impish on 2022-01-06 (18 days ago) UserGroups: adm cdrom dip docker lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/18/2021 dmi.bios.release: 1.11 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.11.1 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.11.1:bd11/18/2021:br1.11:svnDellInc.:pnPrecision5750:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr:sku0990: dmi.product.family: Precision dmi.product.name: Precision 5750 dmi.product.sku: 0990 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1958850/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1958850] Re: USB port lost function after unplugging usb drive
@kc, thanks for sharing -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1958850 Title: USB port lost function after unplugging usb drive Status in HWE Next: New Status in OEM Priority Project: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: New Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Jammy: In Progress Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: [Impact] Test the proposed 5.14 oem kernel, and get a failure symptom. Unplug a usb drive from WD19TB docking and a BUG reported in kernel, then the other embedded usb port can't detect usb drive anymore after a while. kernel: usb 5-2.3.3: USB disconnect, device number 5 kernel: BUG: kernel NULL pointer dereference, address: 0030 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: [#1] SMP NOPTI [Fix] 2a19b28f7929) blk-mq: cancel blk-mq dispatch work... is the first regression and it lands mainline since v5.16-rc2. After applied https://lore.kernel.org/all/20210816134624.ga24...@lst.de/#r, issue is gone. the patches has beend landed since v5.15-rc1. [Test Case] 1. plug usb driver on the machine. 2. unplug usb driver. 3. check the dmesg if the oops would be shown [Where problems could occur] Medium ~~~ Test the proposed 5.14 oem kernel, and get a failure symptom. Unplug a usb drive from WD19TB docking and a BUG reported in kernel, then the other embedded usb port can't detect usb drive anymore after a while. kernel: usb 5-2.3.3: USB disconnect, device number 5 kernel: BUG: kernel NULL pointer dereference, address: 0030 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: [#1] SMP NOPTI --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu71 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: u 2205 F pulseaudio /dev/snd/controlC0: u 2205 F pulseaudio CasperMD5CheckResult: pass CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 21.10 InstallationDate: Installed on 2021-04-29 (270 days ago) InstallationMedia: Ubuntu 21.04 "Hirsute Hippo" - Release amd64 (20210420) MachineType: Dell Inc. Precision 5750 NonfreeKernelModules: nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.14.0-1021-oem root=UUID=834a3a4a-65e5-44ed-8f1a-4bdd2df3cce2 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 5.14.0-1021.23-oem 5.14.21 RelatedPackageVersions: linux-restricted-modules-5.14.0-1021-oem N/A linux-backports-modules-5.14.0-1021-oem N/A linux-firmware 1.201.3 Tags: impish Uname: Linux 5.14.0-1021-oem x86_64 UpgradeStatus: Upgraded to impish on 2022-01-06 (18 days ago) UserGroups: adm cdrom dip docker lpadmin lxd plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 11/18/2021 dmi.bios.release: 1.11 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.11.1 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.11.1:bd11/18/2021:br1.11:svnDellInc.:pnPrecision5750:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr:sku0990: dmi.product.family: Precision dmi.product.name: Precision 5750 dmi.product.sku: 0990 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1958850/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1903969] Re: failed to boot to GUI: i915 0000:00:02.0: [drm] *ERROR* Link Training Unsuccessful
Kernel in proposed solved the problem, system can now boot correctly with monitor connected on WD19 docking, with docking connected on system TBT port. Done 10 cold boot and 10 warm boot cycles, all pass. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1903969 Title: failed to boot to GUI: i915 :00:02.0: [drm] *ERROR* Link Training Unsuccessful Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.10 package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.10 source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: New Status in linux source package in Groovy: Won't Fix Status in linux-oem-5.10 source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: Invalid Status in linux source package in Hirsute: In Progress Status in linux-oem-5.10 source package in Hirsute: Invalid Status in linux-oem-5.6 source package in Hirsute: Invalid Bug description: [SRU Justification] [Impact] On platforms supported DP tunneling over USB 3.2 or so, a Retimer is required on the host side to cover insertion loss. On such platforms the rtimer firmware maybe configured to use LTTPR (Link Training Tunable PHY Repeater) non-transparent mode only, which is only supported in drm-tip currently. Without LTTPR support, link training may fail with following error messages depending on the data path configuration: i915 :00:02.0: [drm] *ERROR* Link Training Unsuccessful i915 :00:02.0: [drm] *ERROR* CPU pipe A FIFO underrun [Fix] Patchset https://www.spinics.net/lists/intel-gfx/msg248700.html ("drm/i915: Add support for LTTPR non-transparent link training mode") is required to fix this issue. It has been landed to drm-tip and will only be merged to mainline in v5.11. Patchset https://patchwork.freedesktop.org/series/76993/ ("Plumb crtc state to link training code") is included for link training functions prototype changes. [Test Case] On Dell OptiPlex and WD19 docking station, use following steps to verify: 1. disconnect WD19 from OptiPlex, disconnect OptiPlex's power 2. attach OptiPlex's power cord 3. attach WD19's power cord 4. attach DP to WD19 5. attach WD19 to OptiPlex 6. boot up and check if boot to GUI directly 7. `dmesg` and check if aforementioned DRM link training error appears [Where problems could occur] The second patchset pulled for dependency doesn't have too much effective changes but refactoring some translation functions, so very unlikely to have regressions. For the major part, LTTPR support, when LTTPR is either not detected or not supported, it will fall back to use transparent mode as it was. Otherwise, DP Standard recommends to use LTTPR non-transparent mode for link training, so this should be the right way to have best hardware support. == original bug description == [Summary] When the monitor ONLY is connected to the WD19 (DP port) and WD19 is connected to the type c port than boot the machine, the monitor shows no video output after loaded i915. [Reproduce Steps] 1. connect power cable of WD19 2. connect DP cable from monitor to WD19 3. connect power cable to target system. 4. connect type c cable from WD19 to target system 5. boot up [Results] Expected: video output as there is only one monitor connected. Actual: No video output. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: linux-image-5.6.0-1033-oem 5.6.0-1033.35 ProcVersionSignature: Ubuntu 5.6.0-1033.35-oem 5.6.19 Uname: Linux 5.6.0-1033-oem x86_64 ApportVersion: 2.20.11-0ubuntu27.11 Architecture: amd64 CasperMD5CheckResult: skip Date: Thu Nov 12 05:11:11 2020 DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-focal-amd64-20200502-85+fossa-metapod+X40 InstallationDate: Installed on 2020-11-03 (9 days ago) InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary 20200502-05:58 SourcePackage: linux-signed-oem-5.6 UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1903969/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1845959] Re: QAT drivers for C3XXX and C62X not included as modules
Hi, I upgraded my kernel to 5.3.0-40.32 and qat_c3xxx caused hung task on my dm_crypt devices. I had to workaround by blacklisting qat_c3xxx. I'm using Supermicro A2SDI-4C-HLN4F with Intel Atom C3558. ** Attachment added: "hung_task.log" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1845959/+attachment/5331790/+files/hung_task.log -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1845959 Title: QAT drivers for C3XXX and C62X not included as modules Status in linux package in Ubuntu: Confirmed Status in linux source package in Disco: Fix Committed Status in linux source package in Eoan: Fix Released Status in linux source package in Focal: Confirmed Bug description: [Impact] The kernel included in Ubuntu is built with the following configuration for the Intel® QuickAssit drivers: CONFIG_CRYPTO_DEV_QAT=m CONFIG_CRYPTO_DEV_QAT_DH895xCC=m # CONFIG_CRYPTO_DEV_QAT_C3XXX is not set # CONFIG_CRYPTO_DEV_QAT_C62X is not set CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m # CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set # CONFIG_CRYPTO_DEV_QAT_C62XVF is not set This is a request to use the following configuration that enables C3XXX, C62X and DH895xCC: CONFIG_CRYPTO_DEV_QAT=m CONFIG_CRYPTO_DEV_QAT_DH895xCC=m CONFIG_CRYPTO_DEV_QAT_C3XXX=m CONFIG_CRYPTO_DEV_QAT_C62X=m CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m CONFIG_CRYPTO_DEV_QAT_C62XVF=m [Fix] Apply the attached config patch and recompile [Regression potential] Low, we are enabling some upstream drivers. --- ProblemType: Bug ApportVersion: 2.20.10-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gcabiddu 1133 F pulseaudio CurrentDesktop: ubuntu:GNOME DistroRelease: Ubuntu 19.04 InstallationDate: Installed on 2019-09-30 (0 days ago) InstallationMedia: Ubuntu 19.04 "Disco Dingo" - Release amd64 (20190416) IwConfig: enp1s0no wireless extensions. lono wireless extensions. Lsusb: Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: QEMU Standard PC (Q35 + ICH9, 2009) Package: linux (not installed) ProcFB: 0 qxldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.0.0-13-generic root=UUID=29678774-3470-4779-a7ac-591572bd23c8 ro quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.0.0-13.14-generic 5.0.6 RelatedPackageVersions: linux-restricted-modules-5.0.0-13-generic N/A linux-backports-modules-5.0.0-13-generic N/A linux-firmware1.178 RfKill: Tags: disco Uname: Linux 5.0.0-13-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 04/01/2014 dmi.bios.vendor: SeaBIOS dmi.bios.version: 1.12.0-2.fc30 dmi.chassis.type: 1 dmi.chassis.vendor: QEMU dmi.chassis.version: pc-q35-3.1 dmi.modalias: dmi:bvnSeaBIOS:bvr1.12.0-2.fc30:bd04/01/2014:svnQEMU:pnStandardPC(Q35+ICH9,2009):pvrpc-q35-3.1:cvnQEMU:ct1:cvrpc-q35-3.1: dmi.product.name: Standard PC (Q35 + ICH9, 2009) dmi.product.version: pc-q35-3.1 dmi.sys.vendor: QEMU To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1845959/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] [NEW] Pop sound from build-in speaker during cold boot and resume from S3
Public bug reported: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: New Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334782/+files/Lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
apport information ** Tags added: apport-collected bionic ** Description changed: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) - Device is not with me at this moment, I will provide more info if - required. + Device is not with me at this moment, I will provide more info if required. + --- + ProblemType: Bug + ApportVersion: 2.20.9-0ubuntu7.2 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: ubuntu 1901 F pulseaudio + CurrentDesktop: ubuntu:GNOME + DistributionChannelDescriptor: + # This is the distribution channel descriptor for the OEM CDs + # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor + canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 + DistroRelease: Ubuntu 18.04 + InstallationDate: Installed on 2020-03-09 (0 days ago) + InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 + MachineType: Dell Inc. Wyse 5070 Thin Client + Package: linux (not installed) + ProcEnviron: + TERM=xterm-256color + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcFB: 0 i915drmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 + ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 + RelatedPackageVersions: + linux-restricted-modules-5.3.0-40-generic N/A + linux-backports-modules-5.3.0-40-generic N/A + linux-firmware1.173.9 + Tags: bionic + Uname: Linux 5.3.0-40-generic x86_64 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 01/08/2020 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: 1.5.0 + dmi.board.vendor: Dell Inc. + dmi.chassis.type: 3 + dmi.chassis.vendor: Dell Inc. + dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: + dmi.product.family: Wyse Thin Client 5000 Series + dmi.product.name: Wyse 5070 Thin Client + dmi.product.sku: 080C + dmi.sys.vendor: Dell Inc. ** Attachment added: "AlsaInfo.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334778/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki
[Kernel-packages] [Bug 1866357] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334779/+files/CRDA.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334781/+files/IwConfig.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334780/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334786/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334787/+files/ProcModules.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334784/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334785/+files/ProcCpuinfoMinimal.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334783/+files/Lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334789/+files/RfKill.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334788/+files/PulseList.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334790/+files/UdevDb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1866357/+attachment/5334791/+files/WifiSyslog.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
I can still reproduce this issue with kernel mentioned in comment#17. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
Currently I only have info for ubuntu kernel, the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. I have done some investigation, found the commit below, could you please help to check if this is one of the many differences between good and bad kernels that I mentioned? https://lore.kernel.org/patchwork/patch/1098499/ I will see if I can find a better machine to try your steps. Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
Tested 4.16, 4.17, 4.18, and finally narrowed down to 4.19.49 mainline kernel is the first one having this issue. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
Yes. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
No pop sound with this kernel! I will test more. Did you identify the suspicious commit? Thanks! -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
@Kai-Heng, Could you also check if this is the same commit causing Ubuntu 4.15.0-59 kernel to have this issue? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
@Kai-Heng, do you know if this patch will be landed in older Ubuntu kernel (4.15) as well? Thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Confirmed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1550194] [NEW] System fail to boot with Ubuntu 16.04
Public bug reported: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 Mainline kernel tested fail: 4.1.9, 4.4.x, 4.5.x Mainline kernel tested pass: 4.1.8 Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1550194 Title: System fail to boot with Ubuntu 16.04 Status in linux package in Ubuntu: Confirmed Bug description: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 Mainline kernel tested fail: 4.1.9, 4.4.x, 4.5.x Mainline kernel tested pass: 4.1.8 Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550194/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1550194] Re: System fail to boot with Ubuntu 16.04
** Description changed: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 Mainline kernel tested fail: 4.1.9, 4.4.x, 4.5.x - Mainline kernel tested pass: 4.1.8 + Mainline kernel tested pass: In progress Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1550194 Title: System fail to boot with Ubuntu 16.04 Status in linux package in Ubuntu: Confirmed Bug description: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 Mainline kernel tested fail: 4.1.9, 4.4.x, 4.5.x Mainline kernel tested pass: In progress Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550194/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1550194] Re: System fail to boot with Ubuntu 16.04
** Description changed: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 - Mainline kernel tested fail: 4.1.9, 4.4.x, 4.5.x + Mainline kernel tested fail: 4.3.x, 4.4.x, 4.5.x Mainline kernel tested pass: In progress Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1550194 Title: System fail to boot with Ubuntu 16.04 Status in linux package in Ubuntu: Confirmed Bug description: Skylake systems fail to boot with Ubuntu 16.04 CPU: Intel i5-6440EQ, i7-6820EQ Kernel version: 4.4.0-8 Mainline kernel tested fail: 4.3.x, 4.4.x, 4.5.x Mainline kernel tested pass: In progress Reproduce steps: 1. Boot from the bootable USB drive (in UEFI mode) 2. Select "Install Ubuntu" from the boot menu Expected Behavior: System completes installation successfully. Actual Behavior: Blank screen right after the grub option is made. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1550194/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1185927] Re: 8086:0046 [Dell XPS 15 L501x] Unable to change backlight by default
Maybe this is the fix: http://comments.gmane.org/gmane.linux.kernel/1604523 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1185927 Title: 8086:0046 [Dell XPS 15 L501x] Unable to change backlight by default Status in “linux” package in Ubuntu: Incomplete Bug description: While I disabled my nvidia card in BIOS, I am unable to change the backlight by default. WORKAROUND: Use both kernel parameters: acpi_backlight=vendor dell_laptop.backlight=0 Having just 'acpi_backlight=vendor' means that if I quickly and repeatedly press the key to change brightness, it eventually lowers, but sometimes the down key makes it higher and visa versa, making it difficult to change. Adding 'dell_laptop.backlight=0' makes the controls work perfectly normally. But when I boot, I get the message: dell_laptop: '0' invalid parameter for 'backlight', at which my computer then continues to boot and works normally, with the brightness control working. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-22-generic 3.8.0-22.33 ProcVersionSignature: Ubuntu 3.8.0-22.33-generic 3.8.11 Uname: Linux 3.8.0-22-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: benjamin 4172 F pulseaudio /dev/snd/controlC0: benjamin 4172 F pulseaudio Date: Thu May 30 19:07:26 2013 HibernationDevice: RESUME=UUID=74004122-cb29-4972-92c0-8bd036223958 InstallationDate: Installed on 2013-04-26 (34 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: Dell Inc. XPS L501X MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=df9e5312-fd68-4a0f-99fb-8b6667021bea ro quiet splash acpi_backlight=vendor dell_laptop.backlight=0 RelatedPackageVersions: linux-restricted-modules-3.8.0-22-generic N/A linux-backports-modules-3.8.0-22-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/15/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 00CKNG dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A03 dmi.modalias: dmi:bvnDellInc.:bvrA03:bd10/15/2010:svnDellInc.:pnXPSL501X:pvrA03:rvnDellInc.:rn00CKNG:rvrA03:cvnDellInc.:ct8:cvrA03: dmi.product.name: XPS L501X dmi.product.version: A03 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1185927/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1185927] Re: 8086:0046 [Dell XPS 15 L501x] Unable to change backlight by default
I am having the similar issue on Ubuntu 13.10. Under /sys/class/backlight, I have 2 interfaces: intel_backlight and dell_backlight. By echo brightness values into 2 different interfaces, the intel one is the actual brightness control interface. Tried to remove dell-laptop kernel module, and adding acpi_backlight=vendor kernel option, brightness hotkey starts working. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1185927 Title: 8086:0046 [Dell XPS 15 L501x] Unable to change backlight by default Status in “linux” package in Ubuntu: Incomplete Bug description: While I disabled my nvidia card in BIOS, I am unable to change the backlight by default. WORKAROUND: Use both kernel parameters: acpi_backlight=vendor dell_laptop.backlight=0 Having just 'acpi_backlight=vendor' means that if I quickly and repeatedly press the key to change brightness, it eventually lowers, but sometimes the down key makes it higher and visa versa, making it difficult to change. Adding 'dell_laptop.backlight=0' makes the controls work perfectly normally. But when I boot, I get the message: dell_laptop: '0' invalid parameter for 'backlight', at which my computer then continues to boot and works normally, with the brightness control working. ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-22-generic 3.8.0-22.33 ProcVersionSignature: Ubuntu 3.8.0-22.33-generic 3.8.11 Uname: Linux 3.8.0-22-generic x86_64 ApportVersion: 2.9.2-0ubuntu8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: benjamin 4172 F pulseaudio /dev/snd/controlC0: benjamin 4172 F pulseaudio Date: Thu May 30 19:07:26 2013 HibernationDevice: RESUME=UUID=74004122-cb29-4972-92c0-8bd036223958 InstallationDate: Installed on 2013-04-26 (34 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424) MachineType: Dell Inc. XPS L501X MarkForUpload: True ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-22-generic root=UUID=df9e5312-fd68-4a0f-99fb-8b6667021bea ro quiet splash acpi_backlight=vendor dell_laptop.backlight=0 RelatedPackageVersions: linux-restricted-modules-3.8.0-22-generic N/A linux-backports-modules-3.8.0-22-generic N/A linux-firmware1.106 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/15/2010 dmi.bios.vendor: Dell Inc. dmi.bios.version: A03 dmi.board.name: 00CKNG dmi.board.vendor: Dell Inc. dmi.board.version: A03 dmi.chassis.type: 8 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: A03 dmi.modalias: dmi:bvnDellInc.:bvrA03:bd10/15/2010:svnDellInc.:pnXPSL501X:pvrA03:rvnDellInc.:rn00CKNG:rvrA03:cvnDellInc.:ct8:cvrA03: dmi.product.name: XPS L501X dmi.product.version: A03 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1185927/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1946433] Re: Can only reach PC3 when ethernet is plugged r8169
Is this landed in 5.13-OEM update? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1946433 Title: Can only reach PC3 when ethernet is plugged r8169 Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.13 package in Ubuntu: Invalid Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Invalid Status in linux-oem-5.13 source package in Focal: Fix Committed Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Impish: In Progress Status in linux-oem-5.13 source package in Impish: Invalid Status in linux-oem-5.14 source package in Impish: Invalid Bug description: [Impact] System only can reach PC3, and it affects power consumption alot. [Fix] Kaiheng implemented a dynamic ASPM for r8169, it not only fixes the PC state issue, but also fixes network speed issue. https://patchwork.ozlabs.org/project/linux-pci/cover/20211007161552.272771-1-kai.heng.f...@canonical.com/ [Test] Verified on 2 different systems which has PC state issue and has network speed issue, these patches fix both issues. [Where problems could occur] It toggles ASPM on and off depends on the network traffic during runtime, I don't think it'll lead to any regressions. Some potential issues have been addressed during the patch submitting. It's v6 now and accepted by upstream. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1946433/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1952041] Re: Fix i915 TypeC disconnect problems for Intel ADL-P
Is it already in Focal 5.14-OEM proposed? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-oem-5.14 in Ubuntu. https://bugs.launchpad.net/bugs/1952041 Title: Fix i915 TypeC disconnect problems for Intel ADL-P Status in HWE Next: New Status in OEM Priority Project: New Status in linux package in Ubuntu: In Progress Status in linux-oem-5.14 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-oem-5.14 source package in Focal: Fix Committed Status in linux source package in Jammy: In Progress Status in linux-oem-5.14 source package in Jammy: Invalid Bug description: [SRU Justification] [Impact] When the ADL-P system connects the external display via TypeC port, it will hang after unplugging the TypeC connector. The system will never come back until reboot. [Fix] Intel has released a patch set to fix the TypeC PHY connect/disconnect logic. The shift for ownership of PHY and power domain will be handled correctly for ADL-P. [Test] The ADL-P system will no longer freeze and the ownership will shift correctly after disconnecting the external display connects via TypeC port. [Where problem could occur] It's kind of a big refactor for the i915 TypeC PHY handling logic. Don't know if there's any problems on older platforms. Targeting only on Unstable and latest OEM kernel for lower risk. == Original Bug Description == [Summary] The system will hang on after unplug DA310 with external monitor (on-demand) Note: 1. Build-in HDMI port cannot duplicate. 2. VGA/HDMI/DP on DA310 to system all can duplicate. 3. Unplug VGA/DP/HDMI from DA310, then unplug DA310 from the system cannot duplicate. [Steps to reproduce] 1. Install dell-bto-focal-fossa-pypar-adl-X160-20210923-2.iso 2. Plug DA310 to USB-C port 3. Plug DP/VGA/HDMI to DA310 4. Unplug DA310 > The system hangs on with black screen [Expected result] The system works well after unplug USB-C with external monitor [Actual result] The system hangs on blackscreen after unplug DA310 with external monitor [Failure rate] 3/3 [Additional information] SKU: SIF-MLK-DVT1-C1, SIF-MLK-DVT1-C5, SIF-MLK-DVT1-C6 Image: canonical-oem-somerville-focal-amd64-20200502-85+fossa-pypar-adl+X160 system-manufacturer: Dell Inc. system-product-name: Dell G15 5520 bios-version: 0.2.9 CPU: Genuine Intel(R) (12x) GPU: :00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:46a3] :01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:25e2] (rev a1) kernel-version: 5.14.0-9002-oem To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1952041/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1714178] Re: Triple 4K monitor display failed (modesetting driver limited to 8192x8192)
If I understand it correctly, to completely resolve this issue, we will need mesa + xserver + kernel fix, but currently only mesa fix is in place, right? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1714178 Title: Triple 4K monitor display failed (modesetting driver limited to 8192x8192) Status in X.Org X server: Unknown Status in linux package in Ubuntu: Triaged Status in mesa package in Ubuntu: Fix Released Status in xorg-server package in Ubuntu: Triaged Status in linux source package in Bionic: Confirmed Status in mesa source package in Bionic: Fix Released Status in xorg-server source package in Bionic: Confirmed Bug description: Title: Triple monitor display failed with Dell Dock (HiDPI) (modesetting) Summary: Triple monitor display failed with Dell Dock (HiDPI) (modesetting) Steps: 1. a laptop with Built-in 4K LCD 2. Cold boot system with Dell Dock connected 3. Connect a 4K monitor to Dock 4. Connect 2nd 4K monitor to Dock 5. Go to [All Settings]=>[Displays] to have the following configuration. Resolution: 4kx2k@60Hz (one Built-in LCD + two external monitors) Mirror displays: disable Expected results: Triple monitor display should works without issues Actual results: Triple monitor display failed with Dell Dock Additional information: 1. Linux distribution: Ubuntu 16.04+modesetting, 16.04.3, and 17.04 2. Laptop: Dell Precision 5520 3. Dell Business Thunderbolt Dock - TB16 https://goo.gl/vFDjpi WORKAROUND (UBUNTU 18.04+): Log in to "Ubuntu on Wayland" instead of "Ubuntu". --- .tmp.unity_support_test.0: ApportVersion: 2.20.1-0ubuntu2.10 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: compiz CompositorUnredirectDriverBlacklist: '(nouveau|Intel).*Mesa 8.0' CompositorUnredirectFSW: true CurrentDesktop: Unity DistUpgraded: Fresh install DistributionChannelDescriptor: # This is a distribution channel descriptor # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-xenial-amd64-20160624-2 DistroCodename: xenial DistroRelease: Ubuntu 16.04 DistroVariant: ubuntu ExtraDebuggingInterest: Yes GraphicsCard: Intel Corporation Device [8086:591d] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:07bf] Subsystem: Dell Device [1028:07bf] InstallationDate: Installed on 2017-08-29 (2 days ago) InstallationMedia: Ubuntu 16.04 "Xenial" - Build amd64 LIVE Binary 20160624-10:47 MachineType: Dell Inc. Precision 5520 Package: xorg-server (not installed) ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.11.0-14-generic.efi.signed root=UUID=b79ae801-0652-4785-beaf-e8387d798948 ro acpi_rev_override quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 4.11.0-14.20~16.04.1-generic 4.11.12 Tags: xenial ubuntu compiz-0.9 Uname: Linux 4.11.0-14-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 05/08/2017 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.3.3 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.3.3:bd05/08/2017:svnDellInc.:pnPrecision5520:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.name: Precision 5520 dmi.sys.vendor: Dell Inc. version.compiz: compiz 1:0.9.12.2+16.04.20160823-0ubuntu1 version.ia32-libs: ia32-libs N/A version.libdrm2: libdrm2 2.4.76-1~ubuntu16.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.0.7-0ubuntu0.16.04.1 version.libgl1-mesa-dri-experimental: libgl1-mesa-dri-experimental N/A version.libgl1-mesa-glx: libgl1-mesa-glx 17.0.7-0ubuntu0.16.04.1 version.xserver-xorg-core: xserver-xorg-core 2:1.18.4-0ubuntu0.3 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev 1:2.10.1-1ubuntu2 version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.7.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.12-1build2 To manage notifications about this bug go to: https://bugs.launchpad.net/xorg-server/+bug/1714178/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1866357] Re: Pop sound from build-in speaker during cold boot and resume from S3
I have enabled proposed and installed latest oem kernel 5.0 in proposed, still can reproduce this issue. Could you let me know which kernel version should I test? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1866357 Title: Pop sound from build-in speaker during cold boot and resume from S3 Status in linux package in Ubuntu: Fix Committed Status in linux source package in Focal: Fix Committed Bug description: [Description] On a Dell Wyse 5070 ThinClient device with 18.04 installed, during cold boot and resume from S3, internal speaker will have a noticeable short pop noise. [More detail] There are similar bugs reported indicating it's related to codec powersaving [1]. On some devices, disable powersaving can workaround it, but the same workaround does not work on this device. [1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1821663 [Experiment] With Ubuntu 16.04 (4.13 kernel) installed --> NO pop noise With Ubuntu 16.04.x (4.15 kernel) installed --> pop noise With Ubuntu 18.04.x (4.15, 5.0 kernel) installed --> pop noise So I started testing kernels between 4.13 and 4.15, found the issue does not present before 4.15.0-58 kernel (including 4.15.0-58), and kernel after that started to have the pop noise. [HW info] Codec: Realtek ALC3253 00:0e.0 Audio device [0403]: Intel Corporation Device [8086:3198] (rev 03) Device is not with me at this moment, I will provide more info if required. --- ProblemType: Bug ApportVersion: 2.20.9-0ubuntu7.2 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 1901 F pulseaudio CurrentDesktop: ubuntu:GNOME DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-bionic-amd64-20180608-47+beaver-osp1-sanbernardino+X100 DistroRelease: Ubuntu 18.04 InstallationDate: Installed on 2020-03-09 (0 days ago) InstallationMedia: Ubuntu 18.04 "Bionic" - Build amd64 LIVE Binary 20180608-09:38 MachineType: Dell Inc. Wyse 5070 Thin Client Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-40-generic root=UUID=22fa172b-895b-4061-834e-d616380befc5 ro mem_sleep_default=deep quiet splash vt.handoff=1 ProcVersionSignature: Ubuntu 5.3.0-40.32~18.04.1-generic 5.3.18 RelatedPackageVersions: linux-restricted-modules-5.3.0-40-generic N/A linux-backports-modules-5.3.0-40-generic N/A linux-firmware1.173.9 Tags: bionic Uname: Linux 5.3.0-40-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 01/08/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.5.0 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.5.0:bd01/08/2020:svnDellInc.:pnWyse5070ThinClient:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct3:cvr: dmi.product.family: Wyse Thin Client 5000 Series dmi.product.name: Wyse 5070 Thin Client dmi.product.sku: 080C dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1866357/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp