[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
After a tough search & build, I found the possible commit for this problem: https://git.kernel.org/cgit/linux/kernel/git/stable/linux- stable.git/commit/drivers/net/usb/r8152.c?id=b214396fb5890af58ff04b42deba7de5a2686338 I build and test the single module 'r8152.ko' based on kernel "linux_4.4.0-65.86". If I use the version before this commit (fb02eb4a29303295f2fed8a69d9aa703792c834b), then the adapter can work under uSB 3.0 mode. However, if I use this commit (b214396fb5890af58ff04b42deba7de5a2686338), then the adapter fails, and dmesg gives: Disable of device-initiated U1 failed. Disable of device-initiated U2 failed. which is exactly what involves in this commit. It should be noticed that this problem is a probabilistic one, that is to say: with the old commit, the adapter can sometimes fail to work; and with the new commit, the adapter can sometimes work, too. So I guess this commit might not be the only reason that cause the unstable USB stack. If an reverse is necessary, then this commit may be to early to be reverted, but it might prove some useful information for fixing. ** Changed in: linux (Ubuntu) Status: Expired => Confirmed ** Tags removed: kernel-bug-exists-upstream-4.8-rc7 kernel-fixed-upstream kernel-fixed-upstream-4.8-rc8 vivid wily ** Tags added: kernel-bug-exists-upstream-4.9 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Confirmed Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.ven
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
I can confirm that this problem was not fixed in kernel 4.8-rc8, neither in 4.9 series. The situation that made I think it was "fixed" is actually caused by USB cable quality issue. As I was testing the kernel 4.8-rc8, the inner 4 fibers for USB 3.0 is actually broken, forcing the adapter communicate with host under USB 2.0 mode. Once I reweld all fibers, I can see it appears along with "Linux Foundation 3.0 root hub", and the problem returns. And I re-test the old ISOs: 14.10 and 15.04 work properly, 15.10 fails. So apparently some regressions occur between 3.19 and 4.2 series. There is, however, a workaround: when inserting the USB plug, leave a part of the plug outside the jack. This will keep the 4 contacts for USB 3.0 disconnected from PC, while 4 other contacts for USB 2.0 unaffected. But I still hope this could be solved from code level. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Expired Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications abou
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
I recently get time to build kernel from source, using dpkg-buildpackage. But there's a problem: "dpkg-buildpackage -b -d -nc" generates both generic and low-latency kernel, which is space and time consuming. How can I specify one build target? Thanks. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Expired Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
I tested daily ISO (2016.12.22) which kernel "4.9.0-11-generic" is included, and everything works fine; though my ethernet adapter still works under USB 2.0 mode (according to output of lsusb). As I notice that kernel tree has accepted another merge (https://github.com/torvalds/linux/commit/bb598c1b8c9bf56981927dcb8c0dc34b8ff95342) from commits focus on r8152.c, it is possible that this problem has been (partially) solved, yet further refinement (i.e. bringing driver in full USB 3.0 mode) still needs some time. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Expired Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
I followed the instruction (http://askubuntu.com/questions/515407/how- recipe-to-build-only-one-kernel-module) to build standalone module (r8152) for testing, and here is what I did: $ apt source linux-source-4.4.0 $ cd linux-4.4.0/ $ make oldconfig $ make prepare $ make scripts And I got error: scripts/sign-file.c:23:30: fatal error: openssl/opensslv.h: No such file or directory compilation terminated. scripts/Makefile.host:91: recipe for target 'scripts/sign-file' failed make[1]: *** [scripts/sign-file] Error 1 Makefile:566: recipe for target 'scripts' failed make: *** [scripts] Error 2 Though I continued: $ cp -v /usr/src/linux-headers-4.4.0-28-generic/Module.symvers ./ $ cd drivers/net/usb/ $ make -C /lib/modules/4.4.0-28-generic/build M=$(pwd) modules $ sudo make -C /lib/modules/4.4.0-28-generic/build M=$(pwd) modules_install And it terminated with numerous errors like: make: Entering directory '/usr/src/linux-headers-4.4.0-28-generic' INSTALL /home/user/linux-4.4.0/drivers/net/usb/asix.ko At main.c:222: - SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175 - SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:178 sign-file: certs/signing_key.pem: No such file or directory INSTALL /home/user/linux-4.4.0/drivers/net/usb/ax88179_178a.ko At main.c:222: - SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175 - SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:178 sign-file: certs/signing_key.pem: No such file or directory INSTALL /home/user/linux-4.4.0/drivers/net/usb/catc.ko .. Could anyone give me some advice? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Expired Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vend
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
The poor condition of network does not allow me to download the entire kernel source for compiling and testing. But I belive this commit (https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/usb/r8152.c?id=d6989d4bbe6c4d1c2a76696833a07f044e85694d) fix my problem, as it is the only commit that touches 'r8152.c' since the release of kernel 4.8-rc7. Some more detailed info about this merge commit can be found at https://github.com/torvalds/linux/commits/master/drivers/net/usb/r8152.c . -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Incomplete Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
After install kernel 4.8-rc8, this adapter finally comes up in ifconfig's output. I can now use wired connection, though lsusb reports device "0bda:8153" runs under USB 2.0 mode. Hope that a (stable) driver for USB 3.0 could come soon. Thanks for the work you've done. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Triaged Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
** Tags removed: kernel-bug-exists-upstream-4.8-rc6 ** Tags added: kernel-bug-exists-upstream-4.8-rc7 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Triaged Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
Before plugging in T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.04 S: Manufacturer=Linux 4.4.0-28-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=8001 Rev=00.03 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=11 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.04 S: Manufacturer=Linux 4.4.0-28-generic xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2232 ProdID=1071 Rev=00.21 S: Manufacturer=Generic S: Product=ATIV Real HD Camera S: SerialNumber=200901010001 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 4 D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1 P: Vendor=1d6b ProdID=0003 Rev=04.04 S: Manufacturer=Linux 4.4.0-28-generic xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub After plugging in T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.04 S: Manufacturer=Linux 4.4.0-28-generic ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=:00:1d.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 8 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=8001 Rev=00.03 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=11 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev=04.04 S: Manufacturer=Linux 4.4.0-28-generic xhci-hcd S: Product=xHCI Host Controller S: SerialNumber=:00:14.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 4 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0610 Rev=92.16 S: Manufacturer=GenesysLogic S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub T: Bus=02 Lev=02 Prnt=04 Port=01 Cnt=01 Dev#= 5 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=2188 ProdID=0ae1 Rev=01.00 S: Product= USB OPTICAL MOUSE C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid T: Bus=02 Lev=02 Prnt=04 Port=02 Cnt=02 Dev#= 6 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=5c0a ProdID=8502 Rev=01.00 S: Manufacturer=SINO WEALTH S: Product=USB KEYBOARD C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb T: Bus=02 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2232 ProdID=1071 Rev=00.21 S: Manufacturer=Generic S: Product=ATIV Real HD Camera S: SerialNumber=200901010001 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Dri
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
Sorry for commening on the wrong place... Following versions of Ubuntu Live ISOs have been tested: - 15.10 (kernel 4.2.0-16-generic) - 15.04 (kernel 3.19.0-15-generic) - 14.10 (kernel 3.16.0-23-generic) - 14.04.5 (kernel 4.4.0-31-generic) Both 15.04 and 14.10 work fine. But I noticed some differences showed in dmesg: "eth0" came up directly without being renamed to something like "enp0s". Also, following version of kernel have been tested: - 4.1.32 - 3.18.41 - 4.7.3 (on Manjaro) - 4.1.32 (on Manjaro) - 3.16.37 (on Manjaro) None of them works. Perhaps it is a back-ported feature that makes USB 3.0 drivers broken? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Incomplete Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://l
[Kernel-packages] [Bug 1586195] Re: Realtek 8153-based ethernet adapter on usb3 eventually stops working requiring unplug/replug
I tested following versions of Ubuntu Live ISOs: - 15.10 (kernel 4.2.0-16-generic) - 15.04 (kernel 3.19.0-15-generic) - 14.10 (kernel 3.16.0-23-generic) - 14.04.5 (kernel 4.4.0-31-generic) Both 15.04 and 14.10 work fine. But I noticed some differences showed in dmesg: "eth0" came up directly without being renamed to something like "enp0s". -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1586195 Title: Realtek 8153-based ethernet adapter on usb3 eventually stops working requiring unplug/replug Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Triaged Bug description: Seems to be paired with dmesg entries like this on the trusty kernel: [24763.731054] usb 4-4.2: Disable of device-initiated U1 failed. [24763.734507] usb 4-4.2: Disable of device-initiated U2 failed. [24763.734594] r815x 4-4.2:2.0 eth3: unregister 'r815x' usb-:00:14.0-4.2, RTL8153 ECM Device [24763.802963] usb 4-4.2: Set SEL for device-initiated U1 failed. [24763.806450] usb 4-4.2: Set SEL for device-initiated U2 failed. [24763.809953] usb 4-4.2: usb_reset_and_verify_device Failed to disable LTM [24763.809953] . [24763.810579] usb 4-4.2: USB disconnect, device number 7 [24763.940765] userif-1: sent link down event. [24763.940769] userif-1: sent link up event. And like this on mainline: [ 259.731142] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 259.752915] usb 4-3: New USB device found, idVendor=0bda, idProduct=8153 [ 259.752918] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 259.752920] usb 4-3: Product: USB 10/100/1000 LAN [ 259.752921] usb 4-3: Manufacturer: Realtek [ 259.752922] usb 4-3: SerialNumber: 0100 [ 259.909368] usb 4-3: reset SuperSpeed USB device number 4 using xhci_hcd [ 259.993254] r8152 4-3:1.0 eth0: v1.08.3 [ 260.079151] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 296.266600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 300.785814] r8152 4-3:1.0 eth0: Stop submitting intr, status -71 [ 302.832697] usb 4-3: usb_reset_and_verify_device Failed to disable LTM [ 302.832697] . [ 302.833086] usb 4-3: USB disconnect, device number 4 Mainline version fyi: [0.00] Linux version 4.6.0-040600-generic (kernel@gomeisa) (gcc version 5.3.1 20160509 (Ubuntu 5.3.1-19ubuntu1) ) #201605151930 SMP Sun May 15 23:32:59 UTC 2016 I also get a similar message about 'Failed to disable LTM' if I just unplug the device before the breakage occurs. I've attached lsusb before the breakage occurs (so you can see the device) from the mainline kernel. Interestingly it appears the drivers on trusty and wily/mainline are different (r815x vs r8152) yet still exhibit similar troubles. I'm still digging around to try and figure out why this doesn't seem to be working, but I was wondering if you all had any idea what might be going pear-shaped here. Thanks! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1586195/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
** Tags added: kernel-bug-exists-upstream-4.8-rc6 ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: Confirmed Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] Re: Realtek 8153-based ethernet adapter doesn't work
By the way, this adapter used to work on my old laptop (running the same distribution and the same kernel, but supporting only USB 2.0). -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: New Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1622322/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1622322] [NEW] Realtek 8153-based ethernet adapter doesn't work
Public bug reported: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: linux-image-4.4.0-28-generic 4.4.0-28.47 ProcVersionSignature: Ubuntu 4.4.0-28.47-generic 4.4.13 Uname: Linux 4.4.0-28-generic i686 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: user 1825 F pulseaudio /dev/snd/controlC1: user 1825 F pulseaudio CurrentDesktop: Unity Date: Sun Sep 11 19:01:59 2016 MachineType: SAMSUNG ELECTRONICS CO., LTD. 930X2K/931X2K ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-28-generic root=UUID=711b7dd0-0467-4bb6-85b4-bca68124c2cb ro quiet splash RelatedPackageVersions: linux-restricted-modules-4.4.0-28-generic N/A linux-backports-modules-4.4.0-28-generic N/A linux-firmware1.157.2 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/26/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P06AEU.084.151026.MK dmi.board.asset.tag: No Asset Tag dmi.board.name: NP930X2K-K07CN dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: SGL8656A04-C01-G001-S0001+10.0.10586 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: N/A dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP06AEU.084.151026.MK:bd10/26/2015:svnSAMSUNGELECTRONICSCO.,LTD.:pn930X2K/931X2K:pvrP06AEU:rvnSAMSUNGELECTRONICSCO.,LTD.:rnNP930X2K-K07CN:rvrSGL8656A04-C01-G001-S0001+10.0.10586:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvrN/A: dmi.product.name: 930X2K/931X2K dmi.product.version: P06AEU dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1622322 Title: Realtek 8153-based ethernet adapter doesn't work Status in linux package in Ubuntu: New Bug description: Similar to Bug #1586195. Realtek 8153-based ethernet adapter doesn't work. No entry for the adapter appears in ifconfig. Adding "0bda:8152" to tlp blacklist(/etc/default/tlp) or triggering usb_modeswitch (by ejecting /dev/sr0) does not work either. dnesg output: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF
[Kernel-packages] [Bug 1586195] Re: Realtek 8153-based ethernet adapter on usb3 eventually stops working requiring unplug/replug
Similar problem, dmesg gives: [ 15.229468] usb 3-1.1: new SuperSpeed USB device number 4 using xhci_hcd [ 15.249257] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 15.249260] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 15.249262] usb 3-1.1: Product: USB 10/100/1000 LAN [ 15.249264] usb 3-1.1: Manufacturer: Realtek [ 15.249265] usb 3-1.1: SerialNumber: [ 15.329605] usb 3-1.1: reset SuperSpeed USB device number 4 using xhci_hcd [ 15.372202] r8152 3-1.1:1.0 eth0: v1.08.2 [ 16.413210] r8152 3-1.1:1.0 enx00e04c680bfb: renamed from eth0 [ 16.454622] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.032871] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680bfb: link is not ready [ 17.038222] usb 3-1.1: Disable of device-initiated U1 failed. [ 17.038257] usb 3-1.1: Failed to set U2 timeout to 0x0,error code -71 [ 17.042065] usb 3-1.1: Set SEL for device-initiated U1 failed. [ 17.045682] usb 3-1.1: Set SEL for device-initiated U2 failed. [ 17.045690] usb 3-1.1: usb_reset_and_verify_device Failed to disable LPM . [ 17.046906] usb 3-1.1: USB disconnect, device number 4 [ 17.713462] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 17.730139] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 17.730147] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 17.730151] usb 3-1.1: Product: USB 10/100/1000 LAN [ 17.730155] usb 3-1.1: Manufacturer: Realtek [ 17.730158] usb 3-1.1: SerialNumber: [ 22.732882] usb 3-1.1: Disable of device-initiated U1 failed. [ 22.739551] usb 3-1.1: Disable of device-initiated U2 failed. [ 23.053009] usb 3-1.1: reset SuperSpeed USB device number 5 using xhci_hcd Using Ubuntu 16.04, kernel 4.4.0-28-generic. Also reproduced under Manjaro 16.08, kernel 4.7.2-1. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1586195 Title: Realtek 8153-based ethernet adapter on usb3 eventually stops working requiring unplug/replug Status in linux package in Ubuntu: Incomplete Status in linux source package in Xenial: Triaged Bug description: Seems to be paired with dmesg entries like this on the trusty kernel: [24763.731054] usb 4-4.2: Disable of device-initiated U1 failed. [24763.734507] usb 4-4.2: Disable of device-initiated U2 failed. [24763.734594] r815x 4-4.2:2.0 eth3: unregister 'r815x' usb-:00:14.0-4.2, RTL8153 ECM Device [24763.802963] usb 4-4.2: Set SEL for device-initiated U1 failed. [24763.806450] usb 4-4.2: Set SEL for device-initiated U2 failed. [24763.809953] usb 4-4.2: usb_reset_and_verify_device Failed to disable LTM [24763.809953] . [24763.810579] usb 4-4.2: USB disconnect, device number 7 [24763.940765] userif-1: sent link down event. [24763.940769] userif-1: sent link up event. And like this on mainline: [ 259.731142] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 259.752915] usb 4-3: New USB device found, idVendor=0bda, idProduct=8153 [ 259.752918] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 259.752920] usb 4-3: Product: USB 10/100/1000 LAN [ 259.752921] usb 4-3: Manufacturer: Realtek [ 259.752922] usb 4-3: SerialNumber: 0100 [ 259.909368] usb 4-3: reset SuperSpeed USB device number 4 using xhci_hcd [ 259.993254] r8152 4-3:1.0 eth0: v1.08.3 [ 260.079151] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 296.266600] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 300.785814] r8152 4-3:1.0 eth0: Stop submitting intr, status -71 [ 302.832697] usb 4-3: usb_reset_and_verify_device Failed to disable LTM [ 302.832697] . [ 302.833086] usb 4-3: USB disconnect, device number 4 Mainline version fyi: [0.00] Linux version 4.6.0-040600-generic (kernel@gomeisa) (gcc version 5.3.1 20160509 (Ubuntu 5.3.1-19ubuntu1) ) #201605151930 SMP Sun May 15 23:32:59 UTC 2016 I also get a similar message about 'Failed to disable LTM' if I just unplug the device before the breakage occurs. I've attached lsusb before the breakage occurs (so you can see the device) from the mainline kernel. Interestingly it appears the drivers on trusty and wily/mainline are different (r815x vs r8152) yet still exhibit similar troubles. I'm still digging around to try and figure out why this doesn't seem to be working, but I was wondering if you all had any idea what might be going pear-shaped here. Thanks! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1586195/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp