RE: [LARTC] HTB? (NEWBIE)
How the guide say I expect to see on router (with command tc -s qdisc ls dev eth0) that unclassified traffic, like ssh, get rounded to 20: but it doesn't happen. - Traffic just doesn't get rounded to a class. If you want traffic going to a class you need to specify a filter. Did you by chance man the default class 1:30. Any traffic not classified should end up there. - Packet shaping is only done on the Egress/root side of an interface. That is why you will only see stats for that. You won't see stats for the ingress side. Does this answer any of your questions? Jon Flechsenhaar Boeing WNW Team Network Services (714)-762-1231 202-E7 -Original Message- From: Simone84bo [mailto:[EMAIL PROTECTED] Sent: Friday, January 19, 2007 3:05 PM To: lartc@mailman.ds9a.nl Subject: [LARTC] HTB? (NEWBIE) Hi to all I am studying HTB on LARTC how to. I realize a simple configuration on router: tc qdisc add dev eth0 root handle 1: htb default 30 tc class add dev eth0 parent 1: classid 1:1 htb rate 3mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit burst 15k tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0x flowid 1:10 After this configuration I make a ssh connection between client and server. How the guide say I expect to see on router (with command tc -s qdisc ls dev eth0) that unclassified traffic, like ssh, get rounded to 20: but it doesn't happen. The count of ssh traffic packet result only on root qdisc. Why? A second question if i want to limited rate of all my router which configuration can i realize? Thanks -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Problemi di Liquidità? Con Logos Finanziaria 30.000 € in 24 ore a dipendenti e lavoratori autonomi con rimborsi fino a 120 mesi, clicca qui Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=2911d=20070120 ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] HTB? (NEWBIE)
On Jan 20, 2007, at 12:05 AM, Simone84bo wrote: Hi to all I am studying HTB on LARTC how to. I realize a simple configuration on router: tc qdisc add dev eth0 root handle 1: htb default 30 tc class add dev eth0 parent 1: classid 1:1 htb rate 3mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit burst 15k tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0x flowid 1:10 After this configuration I make a ssh connection between client and server. How the guide say I expect to see on router (with command tc -s qdisc ls dev eth0) that unclassified traffic, like ssh, get rounded to 20: but it doesn't happen. The count of ssh traffic packet result only on root qdisc. Why? A second question if i want to limited rate of all my router which configuration can i realize? You'd see that if you used filter on port 22 instead of 80. 'Cause 22 is the port of ssh. And your default class is wrong. It should be 1,10 or 20. 10 or 20 preferably. regards -- Bartek Krawczyk JID: [EMAIL PROTECTED] GG: 2094683 ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] HTB? (NEWBIE)
You should propably try: tc qdisc add dev eth0 root handle 1: htb default 20 and not 30 cause your default class is 20 no? On 1/20/07, Simone84bo [EMAIL PROTECTED] wrote: Hi to all I am studying HTB on LARTC how to. I realize a simple configuration on router: tc qdisc add dev eth0 root handle 1: htb default 30 tc class add dev eth0 parent 1: classid 1:1 htb rate 3mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:10 htb rate 2mbit burst 15k tc class add dev eth0 parent 1:1 classid 1:20 htb rate 1mbit burst 15k tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip dport 80 0x flowid 1:10 After this configuration I make a ssh connection between client and server. How the guide say I expect to see on router (with command tc -s qdisc ls dev eth0) that unclassified traffic, like ssh, get rounded to 20: but it doesn't happen. The count of ssh traffic packet result only on root qdisc. Why? A second question if i want to limited rate of all my router which configuration can i realize? Thanks -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Problemi di Liquidità? Con Logos Finanziaria 30.000 € in 24 ore a dipendenti e lavoratori autonomi con rimborsi fino a 120 mesi, clicca qui Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=2911d=20070120 ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc -- Jordi Segués Daina --- Andorra GSM: (+376) 35 35 68 France GSM: (+33) (0)6 81 88 35 55 [EMAIL PROTECTED] / MSN: [EMAIL PROTECTED] AIM: superjordix Skype: callto://superjordix --- http://www.JordiX.com ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
