Re: 2.19.15 slur accidental collision (Paul Scott)
Paul, Paul Scott-4 wrote > I wasn't aware that slur direction could be changed with "_" as > articulations can. I used \slurDown and \slurNeutral. Yes! You can also force the direction for beams ("^[" and "_["), ties, phrasing slurs, dynamics, text, markups, etc. Can't say I've tried it on everything, but those definitely work. Using "\once \slurDown" is basically the same as "_(". The same philosophy applies to the other grobs. Paul Scott-4 wrote > I wonder if the \shape solution above would have to be recalculated for > each > new situation. Well, the "\shape" command basically assigns a set of four "extra-offset" value-pairs for each control point in each curve (I say "curve" since it can be used for ties, slurs, and phrasing slurs, and "each curve" because it can be used for broken curves, or those that cross multiple systems). Using the same values over and over again is, therefore, not advisable since most curves that LilyPond ends up choosing are not shaped alike (since it is at this point the extra-offset value-pairs are applied). Therefore, if the "\shape" command is necessary, the value-pairs will need to be customized for each curve you desire to tweak. Happy Engraving, Abraham -- View this message in context: http://lilypond.1069038.n5.nabble.com/Re-2-19-15-slur-accidental-collision-Paul-Scott-tp171322p171336.html Sent from the User mailing list archive at Nabble.com. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
set in layout block
Hi, how can I put a set command in the layout block? I am asking for the following beamExceptions and in general: \version "2.18.2" % within the notes: { \set Timing.beamExceptions = #'() a8 b a b } % in layout block: { a8 b a b } \layout{ \context{ \Staff beamExceptions = #'() } } Is that correct? It seems to work but where has the ‘Timing’ gone? How does it know about the Timing? Is that a general rule, that \set commands have no dot-syntax in the \layout block but only work with \context { \‘Context’ … } ? TIA, Joram ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: 2.19.15 slur accidental collision (Paul Scott)
On Mon, Feb 02, 2015 at 06:35:34AM +1100, Nick Payne wrote: > On 01/02/2015 13:15, Cynthia Karl wrote: > >>Message: 2 > >>Date: Sat, 31 Jan 2015 13:31:14 -0700 > >>From: Paul Scott > >>To: lilypond-user@gnu.org > >>Subject: 2.19.15 slur accidental collision > >>Message-ID: <20150131203114.GA12158@joy3> > >>Content-Type: text/plain; charset=us-ascii > >> > >>Hi, > >> > >>I am trying to make a slur not collide with an accidental. Reading the > >>Learning Manual I find how to do: > >> > > > >\version "2.19.15" > > > >\relative{ > >\shape #'((-1.2 . 2.9) (0 . 2) (0 . 2) (0 . 0)) Slur > >f'8( bes4) > >} > > Surely in this situation the simplest and most attractive option is to > reverse the direction of the slur: > > \version "2.19.15" > > \relative{ > f'8_( bes4) > } After seeing the results of the original answer to my question reversing the slur direction is what I ended up doing. I wasn't aware that slur direction could be changed with "_" as articulations can. I used \slurDown and \slurNeutral. The original that I am making a new part from neatly attached the beginning of the slur to the top of the flag of the first note. I wonder if the \shape solution above would have to be recalculated for each new situation. Thank you, Paul ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: voiceOneStyle etc.
"Noeck" wrote Sunday, February 01, 2015 4:00 PM > the voiceOneStyle is defined in ly/property-init.ly. > It only overrides the NoteHead, Stem and Beam. > Is there a particular reason for this? Yes. They were written specifically to support certain examples in the documentation. Those particular grobs were the only ones used in those examples. > I wrote my own definitions for a project, including Rests (!), TextScript, > Script, Slur and Tie: > > voiceStyleFour = { > \override NoteHead.style = #'harmonic-mixed > \override NoteHead.color = #(x11-color 'OrangeRed) > \override Stem.color = #(x11-color 'OrangeRed) > \override Beam.color = #(x11-color 'OrangeRed) > \override Rest.color = #(x11-color 'OrangeRed) > \override TextScript.color = #(x11-color 'OrangeRed) > \override Script.color = #(x11-color 'OrangeRed) > \override Slur.color = #(x11-color 'OrangeRed) > \override Tie.color = #(x11-color 'OrangeRed) > } > There are more, like Fingerings etc. > Would that be interesting to add to property-init.ly or not? > > In addition (separated from the first proposal and clearly more subjective), I > find it rather old-fashioned to use the standard four colours for this (red > green blue magenta). How about a change here? > My personal settings are: firebrick RoyalBlue ForestGreen OrangeRed > for voice 1-4. Well, possibly, if you think it generally useful. However, if you change the shape of the note head or the colours you'll have to change all the text accompanying the examples which use them in the documentation. And the colours will need to have clear names so the text reads nicely. Red, Green, Blue are snappy, easily understood by non-English readers, and clearly distinguished visually. Your suggested colours might be prettier, but that is not the primary requirement here. I think the main use is throughout this section http://www.lilypond.org/doc/v2.19/Documentation/learning/voices-contain-music but you'll need to do a proper search to be sure there are no more. Trevor ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: 2.19.15 slur accidental collision (Paul Scott)
On 01/02/2015 13:15, Cynthia Karl wrote: Message: 2 Date: Sat, 31 Jan 2015 13:31:14 -0700 From: Paul Scott To: lilypond-user@gnu.org Subject: 2.19.15 slur accidental collision Message-ID: <20150131203114.GA12158@joy3> Content-Type: text/plain; charset=us-ascii Hi, I am trying to make a slur not collide with an accidental. Reading the Learning Manual I find how to do: \override Slur.avoid-slur = #'inside or \override Accidental.avoid-slur = #'inside which doesn't seem to do the job. From the LM and the IR I don't follow how to set a value for accidental-collision. Using the LyricText example I thought that \override Slur.accidental-collision = #20 would work but that gets an warning: warning: cannot find property type-check for `accidental-collision' (backend-type?). perhaps a typing error? \version "2.19.15" \relative{ \override Slur.avoid-slur = #'inside \override Accidental.avoid-slur = #'inside \override Slur.accidental-collision = #20 \override Accidental.accidental-collision = #20 f'8( bes4) } TIA for any help with this, How about: \version "2.19.15" \relative{ \shape #'((-1.2 . 2.9) (0 . 2) (0 . 2) (0 . 0)) Slur f'8( bes4) } Surely in this situation the simplest and most attractive option is to reverse the direction of the slur: \version "2.19.15" \relative{ f'8_( bes4) } ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Naming convention brainstorming
Hello Urs If I undestand correctly this is a type of debug mode. If so could it be a debug sub-set such as "debug_structure" when there is the possiblility of other debug modes. regards Peter Gentry ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
voiceOneStyle etc.
Hi, the voiceOneStyle is defined in ly/property-init.ly. It only overrides the NoteHead, Stem and Beam. Is there a particular reason for this? I wrote my own definitions for a project, including Rests (!), TextScript, Script, Slur and Tie: voiceStyleFour = { \override NoteHead.style = #'harmonic-mixed \override NoteHead.color = #(x11-color 'OrangeRed) \override Stem.color = #(x11-color 'OrangeRed) \override Beam.color = #(x11-color 'OrangeRed) \override Rest.color = #(x11-color 'OrangeRed) \override TextScript.color = #(x11-color 'OrangeRed) \override Script.color = #(x11-color 'OrangeRed) \override Slur.color = #(x11-color 'OrangeRed) \override Tie.color = #(x11-color 'OrangeRed) } There are more, like Fingerings etc. Would that be interesting to add to property-init.ly or not? In addition (separated from the first proposal and clearly more subjective), I find it rather old-fashioned to use the standard four colours for this (red green blue magenta). How about a change here? My personal settings are: firebrick RoyalBlue ForestGreen OrangeRed for voice 1-4. Cheers, Joram ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Naming convention brainstorming
> I'm talking about the working, thinking and compiling mode when I'm > working on the _content_ of a score and not it's final visual > appearance. This mode is characterized for example by > ... > Originally we talked about it as "draft mode" but this doesn't seem to > hit the spot. Nor do "devel mode" or "preview mode". > Before work gets published/committed/saved, it is often worked on in a ``sandbox''. Perhaps that term is appropriate. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Naming convention brainstorming
I am no native English speaker. How about “working mode”? Or “crafting mode” – if that has the same artistic/handicraft association that I assume. Joram ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Emacs mode for files containing lyrics
Jakub Pavlík gmail.com> writes: > > > From the description I don't understand your problem. Why is the lilypond mode not suitable for you purposes? The example seems to be just a regular lilypond file ... > Jakub > > > 2015-01-27 16:57 GMT+01:00 Craig Parker-Feldmann magic.ms>:I find it wonderful that some Emacs wizard(s) took the trouble to write a > LilyPond mode for processing LilyPond files. My own ability in writing Emacs > Lisp, in particular: writing modes using Emacs Lisp, is at a very low level. > If the author(s) of the Emacs LilyPond mode could speak to me, I'd like to > have a special mode for files containing only lyrics. > Currently, if I have a file containing lyrics called "min-lyrics.ly", > working on the file looks terrible when font-lock-mode is active. > /-/-/-/-/- min-lyrics.ly -/-/-/-/-/ > LyricsSoprano = \lyricmode { When, for each lace bit in a cup, a dozen goats > reach mint family } > /-/-/-/-/- end of min-lyrics.ly -/-/-/-/-/ > I looked in the file "lilypond-font-lock.el", but the complexity is too much > for me. > ___ > lilypond-user mailing listlilypond-user gnu.orghttps://lists.gnu.org/mailman/listinfo/lilypond-user > > > > > > > ___ > lilypond-user mailing list > lilypond-user gnu.org > https://lists.gnu.org/mailman/listinfo/lilypond-user > I wish to add functionality to Emacs. I desire a font-lock mode which does not consider my minimal example to be musical notes. I am aware of how the color enhancement applies to my minimal example; that is why I wrote it that way. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Displaying scale position beside the note
On 2015-02-01 14:32, and...@andis59.se wrote: I want to display the scale position a long side the note. Ok, I found out that it's called *Scale Degree!* So I found the EZ_numbers_engraver! Case closed! A big thank you for who that created this! // Anders -- English isn't my first language. So any error or strangeness is due to the translation. Please correct my English so that I may become better. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Displaying scale position beside the note
I want to display the scale position a long side the note. Like this, but automatically! I have tried to search for it, but not finding anything (which probably is due to my lack of knowing what 'scale position' is called officially) Is there something in Lilypond or a snippet or do I have to make it myself? %% Start \version "2.19.15" \score { << \new Staff { \key g \major \set fingeringOrientations = #'(right) < d'-2 a' -5> } >> \layout { } \midi { } } %% End I just discovered that fingeringOrientations only work on chords so I need something else to show the scale position, Or some tweak... // Anders -- English isn't my first language. So any error or strangeness is due to the translation. Please correct my English so that I may become better. ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Hungarian Gregorian
And ragged-right = ##f is ok now. See new attached files. Cheers, Pierre 2015-02-01 14:12 GMT+01:00 Pierre Perol-Schneider < pierre.schneider.pa...@gmail.com>: > Oups... > > 2015-02-01 12:44 GMT+01:00 Pierre Perol-Schneider < > pierre.schneider.pa...@gmail.com>: > > >> Simply add : >> >> melisma = #(define-music-function (parser location mus) >> (ly:music?) >> #{ >> { \neume { $mus } h } >> #}) >> >> In your file (or replace it in modernGregorian.ily"). >> > > In fact: > > melisma = #(define-music-function (parser location mus) > (ly:music?) > #{ > { \neume { $mus } \omit Accidental h } > #}) > > Cheers, > Pierre > > > > > > allelujaDeutch.pdf Description: Adobe PDF document \version "2.19.15" \include "modernGregorian.ily" %\pointAndClickOff \language "deutsch" melisma = #(define-music-function (parser location mus) (ly:music?) #{ { \neume { $mus } \omit Accidental h } #}) \paper { indent = 0 top-margin = 15 left-margin = 20 right-margin = 20 tagline = ##f %ragged-right = ##f %ragged-last = ##t } myMelodyModern = \transpose c c' { \clef G \key f\major \omit Stem \repeat volta 2 { f f \melisma { g \lst a } a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" a g \melisma { \lst a g } \melisma { \lst e f } g \melisma { \lst f e } d d \hideNotes d } } myMelodyStandard = \transpose c c' { \clef G \key f\major \stemDown \omit Stem \repeat volta 2 { f f \undo\omit Stem a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \omit Stem a g \undo\omit Stem \once\override Stem.extra-offset = #'(-1.3 . -.5) \omit Stem g \undo\omit Stem \omit Stem d d \hideNotes d } } myLyrics = \lyricmode { \override LyricHyphen.minimum-distance = #5 \override LyricSpace.minimum-distance = #5 A -- le -- lu -- ja. \repeat unfold 2 { a -- le -- lu -- ja. } } \markuplist { \italic "Standard notation:" \vspace #1 } \score { << \cadenzaOn \new Voice = MyMelody \myMelodyStandard \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { system-count = 1 ragged-right = ##f \context { \Lyrics \override VerticalAxisGroup.staff-affinity = ##f } } \header { piece = \markup { \lower #2.7 \fontsize #9 \bold "551" \column { \bold "Alleluja" "(ÉE 432)" } } } } \markuplist { \italic "With 'modernGregorian':" \vspace #1 } \score { << \cadenzaOn \new Voice = MyMelody \myMelodyModern \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { system-count = 1 ragged-right = ##f \context { \Lyrics \override VerticalAxisGroup.staff-affinity = ##f } } \header { piece = \markup { \lower #2.7 \fontsize #9 \bold "551" \column { \bold "Alleluja" "(ÉE 432)" } } } } modernGregorian.ily Description: Binary data ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Hungarian Gregorian
Oups... 2015-02-01 12:44 GMT+01:00 Pierre Perol-Schneider < pierre.schneider.pa...@gmail.com>: > Simply add : > > melisma = #(define-music-function (parser location mus) > (ly:music?) > #{ > { \neume { $mus } h } > #}) > > In your file (or replace it in modernGregorian.ily"). > In fact: melisma = #(define-music-function (parser location mus) (ly:music?) #{ { \neume { $mus } \omit Accidental h } #}) Cheers, Pierre \version "2.19.15" \include "modernGregorian.ily" %\pointAndClickOff \language "deutsch" melisma = #(define-music-function (parser location mus) (ly:music?) #{ { \neume { $mus } \omit Accidental h } #}) \paper { indent = 0 top-margin = 15 left-margin = 20 right-margin = 20 tagline = ##f %ragged-right = ##f %ragged-last = ##t } myMelodyModern = \transpose c c' { \clef G \key f\major \omit Stem \repeat volta 2 { f f \melisma { g \lst a } a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" a g \melisma { \lst a g } \melisma { \lst e f } g \melisma { \lst f e } d d \hideNotes d } } myMelodyStandard = \transpose c c' { \clef G \key f\major \stemDown \omit Stem \repeat volta 2 { f f \undo\omit Stem a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \omit Stem a g \undo\omit Stem <\tweak extra-offset #'(2.3 . 0) e f> \omit Stem g \undo\omit Stem \omit Stem d d \hideNotes d } } myLyrics = \lyricmode { \override LyricHyphen.minimum-distance = #5 \override LyricSpace.minimum-distance = #5 A -- le -- lu -- ja. \repeat unfold 2 { a -- le -- lu -- ja. } } \markuplist { \italic "Standard notation:" \vspace #1 } \score { << \cadenzaOn \new Voice = MyMelody \myMelodyStandard \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { system-count = 1 \context { \Lyrics \override VerticalAxisGroup.staff-affinity = ##f } } \header { piece = \markup { \lower #2.7 \fontsize #9 \bold "551" \column { \bold "Alleluja" "(ÉE 432)" } } } } \markuplist { \italic "With 'modernGregorian':" \vspace #1 } \score { << \cadenzaOn \new Voice = MyMelody \myMelodyModern \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { system-count = 1 \context { \Lyrics \override VerticalAxisGroup.staff-affinity = ##f } } \header { piece = \markup { \lower #2.7 \fontsize #9 \bold "551" \column { \bold "Alleluja" "(ÉE 432)" } } } } ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: 2.19.15 slur accidental collision (Paul Scott)
> Message: 2 > Date: Sat, 31 Jan 2015 13:31:14 -0700 > From: Paul Scott > To: lilypond-user@gnu.org > Subject: 2.19.15 slur accidental collision > Message-ID: <20150131203114.GA12158@joy3> > Content-Type: text/plain; charset=us-ascii > > Hi, > > I am trying to make a slur not collide with an accidental. Reading the > Learning Manual I find how to do: > > \override Slur.avoid-slur = #'inside > or > \override Accidental.avoid-slur = #'inside > which doesn't seem to do the job. > >> From the LM and the IR I don't follow how to set a value for > accidental-collision. Using the LyricText example I thought that > > \override Slur.accidental-collision = #20 > would work but that gets an warning: > > warning: cannot find property type-check for `accidental-collision' > (backend-type?). perhaps a typing error? > > \version "2.19.15" > > \relative{ > \override Slur.avoid-slur = #'inside > \override Accidental.avoid-slur = #'inside > \override Slur.accidental-collision = #20 > \override Accidental.accidental-collision = #20 > f'8( bes4) > } > > TIA for any help with this, How about: \version "2.19.15" \relative{ \shape #'((-1.2 . 2.9) (0 . 2) (0 . 2) (0 . 0)) Slur f'8( bes4) } > > Paul Scott ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Hungarian Gregorian
Hi Sister Judit, I finally changed the ornament function (see attached "modernGregorian.ily" ). Syntax is easy: 'note' -\tweak extra-offset #'(X .Y) \orn 2015-02-01 10:15 GMT+01:00 Rita Composer : > Another problem of us, taht we use > \language "deutsch" > which means we have h instead of b > Simply add : melisma = #(define-music-function (parser location mus) (ly:music?) #{ { \neume { $mus } h } #}) In your file (or replace it in modernGregorian.ily"). Now it can cause a bit difficulty like this in the attechement. > > Another not a "big" proble, just a bit :-) that when we write a music in A > mayor, outside the melisma we have to write "cis" > inside a melisma a "c". Is it complicated to unite? Either cis or c ? > Yes I know this is anoying but, franckly speaking, not easy to achieve. I'll thnik about it anyway. ;) HTH, Pierre modernGregorian.ily Description: Binary data \version "2.19.15" \include "modernGregorian.ily" %\pointAndClickOff \language "deutsch" melisma = #(define-music-function (parser location mus) (ly:music?) #{ { \neume { $mus } h } #}) \paper { indent = 0 top-margin = 15 left-margin = 20 right-margin = 20 system-system-spacing = #'((minimum-distance . 16)) } myMelody = \transpose c c' { \clef G \key a\major \omit Stem \melisma { e \lst a \sst f e \sst c \melisma { d \lst e } } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst a \sst f e \sst c \melisma d \lst e } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" e cis d \bar "" \break cis h, \melisma { d \lst f e } \melisma { d \lst e } e \bar "|" e gis a h a gis h a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \break \melisma { \lst g f e } \melisma { f \lst a } \melisma { \lst e \sst c } \melisma { \lst d \melisma c } h, \bar "|" \melisma { d \lst f e } \melisma { d \lst e } e -\tweak extra-offset #'(1.5 . -2) \orn \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \melisma { f \lst a \mst e \sst c \melisma d \lst e } e \bar "|"\break e gis a h a \melisma { \lst g f } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" fis a e cis \melisma { \lst d \melisma c \melisma h, d \lst f e } \bar "" \break \melisma { d \lst e } e \bar "|" \melisma { \lst e \sst c \melisma \lst d \melisma c \melisma h, d \lst f e } \melisma { d \lst e } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \melisma { f \lst a \mst e c \melisma \lst d \melisma c \melisma h, -\tweak extra-offset #'(1 . -2.5) \orn r r \lst f e f \lst g } \melisma { \lst f e } \bar "||" } myLyrics = \lyricmode { \lal San -- ctus, \lal San -- ctus, \lal San -- ctus, Dó -- mi -- nus De -- us Sá -- ba -- oth. Ple -- ni sunt cæ -- li et ter -- ra gló -- ri -- a tu -- a. Ho -- sán -- na \lal in \lal ex -- \lal cél -- sis. Be -- ne -- dí -- ctus, qui ve -- nit in nó -- mi -- ne \lal Dó -- mi -- ni. \lal Ho -- sán -- na \lal in \lal ex -- \lal cél -- sis. } \score { << \cadenzaOn \new Voice = MyMelody \myMelody \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { } \header { piece = \markup { \fontsize #9 \bold "601" \fontsize #2 \raise #2.3 { \bold "Sanctus" \italic "(GrR VI. mise)" } } } } ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user
Re: Hungarian Gregorian
Hi All, Really great. Another problem of us, taht we use \language "deutsch" which means we have h instead of b Now it can cause a bit difficulty like this in the attechement. Another not a "big" proble, just a bit :-) that when we write a music in A mayor, outside the melisma we have to write "cis" inside a melisma a "c". Is it complicated to unite? Either cis or c ? Thank you! Sister Judit 2015-02-01 0:22 GMT+01:00 Pierre Perol-Schneider < pierre.schneider.pa...@gmail.com>: > Hi, > > 2015-01-31 21:15 GMT+01:00 Pierre Perol-Schneider < > pierre.schneider.pa...@gmail.com>: > >> 2015-01-31 19:38 GMT+01:00 Rita Composer : >> >> What if, we have 2 note with ledgerline in 1 melisma >>> like here: in Sanctus (after Kyrie) >>> https://drive.google.com/file/d/0B1x9jbJPH9FkbmN1ZVY3VzdsaEk/view >>> >> >>> In the last but one version we could change the space after the c >>> I attached. >>> >> >> Ok, I'll take a look later on. >> > > It looks fine for me. > See attached file. > However, there's a problem with the last ornament. I'll work on this asap. > > Cheers, > Pierre > > > \version "2.19.15" \include "modernGregorian.ily" %\pointAndClickOff %%??%% \language "deutsch" \paper { indent = 0 top-margin = 15 left-margin = 20 right-margin = 20 system-system-spacing = #'((minimum-distance . 16)) } myMelody = \transpose c c' { \clef G \key a\major \omit Stem \melisma { e \lst a \sst f e \sst c \melisma { d \lst e } } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst a \sst f e \sst c \melisma d \lst e } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" e cis d \bar "" \break cis h, \melisma { d \lst f e } \melisma { d \lst e } e \bar "|" e gis a h a gis h a \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \break \melisma { \lst g f e } \melisma { f \lst a } \melisma { \lst e \sst c } \melisma { \lst d \melisma c } h, \bar "|" \melisma { d \lst f e } \melisma { d \lst e } \orn #1.5 e \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \melisma { f \lst a \mst e \sst c \melisma d \lst e } e \bar "|"\break e gis a h a \melisma { \lst g f } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" fis a e cis \melisma { \lst d \melisma c \melisma h, d \lst f e } \bar "" \break \melisma { d \lst e } e \bar "|" \melisma { \lst e \sst c \melisma \lst d \melisma c \melisma h, d \lst f e } \melisma { d \lst e } e \once\override Staff.BarLine.bar-extent = #'(0 . 2) \bar "|" \melisma { e \lst g r a \lst h } \melisma { \lst a g f e } \melisma { f \lst a \mst e c \melisma \lst d \melisma c \melisma h, r r \lst f e f \lst g } \melisma { \lst f e } \bar "||" } myLyrics = \lyricmode { \lal San -- ctus, \lal San -- ctus, \lal San -- ctus, Dó -- mi -- nus De -- us Sá -- ba -- oth. Ple -- ni sunt cæ -- li et ter -- ra gló -- ri -- a tu -- a. Ho -- sán -- na \lal in \lal ex -- \lal cél -- sis. Be -- ne -- dí -- ctus, qui ve -- nit in nó -- mi -- ne \lal Dó -- mi -- ni. \lal Ho -- sán -- na \lal in \lal ex -- \lal cél -- sis. } \score { << \cadenzaOn \new Voice = MyMelody \myMelody \new Lyrics \lyricsto MyMelody \myLyrics >> \layout { } \header { piece = \markup { \fontsize #9 \bold "601" \fontsize #2 \raise #2.3 { \bold "Sanctus" \italic "(GrR VI. mise)" } } } } ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user