I got the Pinnacle 800i working on Mythbuntu, I can tune both analog and
digital channels, but if I reboot, for some reason it starts having
problems.
Here is some of the dmesg output (full output is attached)
[ 70.736641] xc5000: firmware read 12332 bytes.
[ 70.736654] xc5000: firmware upload
[ 74.202421] tuner' 1-0064: == WARNING!
==
[ 74.202440] tuner' 1-0064: Support for tuners in i2c address range 0x64
thru 0x6f
[ 74.202452] tuner' 1-0064: will soon be dropped. This message indicates
that your
[ 74.202464] tuner' 1-0064: hardware has a Xceive XC5000 tuner at i2c
address 0x64.
[ 74.202476] tuner' 1-0064: To ensure continued support for your device,
please
[ 74.202487] tuner' 1-0064: send a copy of this message, along with full
dmesg
[ 74.202498] tuner' 1-0064: output to [EMAIL PROTECTED]
[ 74.202508] tuner' 1-0064: Please use subject line: "obsolete tuner i2c
address."
[ 74.202522] tuner' 1-0064: driver: cx88[0], addr: 0x64, type: 76 (Xceive
5000 tuner)
[ 74.202533] tuner' 1-0064: == WARNING!
==
[ 283.549448] s5h1409_readreg: readreg error (ret == -121)
[ 289.995572] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x,
ret == -121)
[ 296.425701] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001,
ret == -121)
[ 302.859825] s5h1409_writereg: writereg error (reg == 0xf4, val == 0x,
ret == -121)
[ 309.293951] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x,
ret == -121)
[ 315.728077] s5h1409_writereg: writereg error (reg == 0xf5, val == 0x0001,
ret == -121)
[ 322.274174] s5h1409_writereg: writereg error (reg == 0xf3, val == 0x0001,
ret == -121)
[ 328.672302] xc5000: I2C write failed (len=4)
[ 328.672368] xc5000: xc_SetSignalSource(0) failed
[0.00] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[0.00] BIOS-provided physical RAM map:
[0.00] BIOS-e820: - 0009f800 (usable)
[0.00] BIOS-e820: 0009f800 - 000a (reserved)
[0.00] BIOS-e820: 000e6c00 - 0010 (reserved)
[0.00] BIOS-e820: 0010 - 040fd800 (usable)
[0.00] BIOS-e820: 040fd800 - 040ff800 (ACPI data)
[0.00] BIOS-e820: 040ff800 - 040ffc00 (ACPI NVS)
[0.00] BIOS-e820: 040ffc00 - 1400 (usable)
[0.00] BIOS-e820: fff8 - 0001 (reserved)
[0.00] 0MB HIGHMEM available.
[0.00] 320MB LOWMEM available.
[0.00] Entering add_active_range(0, 0, 81920) 0 entries of 256 used
[0.00] Zone PFN ranges:
[0.00] DMA 0 -> 4096
[0.00] Normal 4096 ->81920
[0.00] HighMem 81920 ->81920
[0.00] early_node_map[1] active PFN ranges
[0.00] 0:0 ->81920
[0.00] On node 0 totalpages: 81920
[0.00] DMA zone: 32 pages used for memmap
[0.00] DMA zone: 0 pages reserved
[0.00] DMA zone: 4064 pages, LIFO batch:0
[0.00] Normal zone: 608 pages used for memmap
[0.00] Normal zone: 77216 pages, LIFO batch:15
[0.00] HighMem zone: 0 pages used for memmap
[0.00] DMI 2.1 present.
[0.00] ACPI: RSDP signature @ 0xC00F6B80 checksum 0
[0.00] ACPI: RSDP 000F6B80, 0014 (r0 PTLTD )
[0.00] ACPI: RSDT 040FDB3C, 0028 (r1 PTLTDRSDT 0 PTL
100)
[0.00] ACPI: FACP 040FF78C, 0074 (r1 DELL KUBLAI 19991105 PTL
F4240)
[0.00] ACPI: DSDT 040FDB64, 1C28 (r1 Intel S2440BX0 MSFT
104)
[0.00] ACPI: FACS 040FFBC0, 0040
[0.00] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is
required to enable ACPI
[0.00] ACPI: Disabling ACPI support
[0.00] Allocating PCI resources starting at 2000 (gap:
1400:ebf8)
[0.00] Built 1 zonelists. Total pages: 81280
[0.00] Kernel command line:
root=UUID=891c353d-e63f-4714-a42d-b00b92a311d2 ro quiet splash
[0.00] Local APIC disabled by BIOS -- you can enable it with "lapic"
[0.00] mapped APIC to d000 (0128d000)
[0.00] Enabling fast FPU save and restore... done.
[0.00] Enabling unmasked SIMD FPU exception support... done.
[0.00] Initializing CPU#0
[0.00] PID hash table entries: 2048 (order: 11, 8192 bytes)
[0.00] Detected 498.858 MHz processor.
[ 40.523179] Console: colour VGA+ 80x25
[ 40.524308] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 40.525490] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 40.571920] Memory: 312716k/327680k available (2015k kernel code, 14396k
reserved, 916k data, 364k init, 0k highmem)
[ 40.57196