Problem with CentOS 7 Installation
Hello everyone, I tried now several hours to create an unattended centos installation with fai. I've got already a working fai with debian wheezy & jessie and now I wanted to integrate also CentOS. I downloaded the basefile (CENTOS7_x86_64) and put them in $FAI/basefiles folder. The class is also set and the archive will successfully extracted within the installation. But after the extration of the basefile every script and hook will false. I have to admit, that I use an internal ip which is not routeable and won't get connection to the internet. All repositories are accessable via local dns server and local ips (for example debian mirror will resolve into 192.168.0.100) Anyway, after installation the hook "updatebase.CENTOS" will executed and the following "yum update" fail for no reason (client only download repo/repodata.xml and nothing more) - therefore the whole server won't update/install any packages. Now my question: - What special nfsroot do I need? Currently my CentOS Installation use the same nfsroot as for debian (is here the error??) - OT: CentOS-Specific: Why the hack the client only download repo/repodata.xml and output an error afterwards: no baseurl for base/7/ could found? Thank you very much in advance. Best regards, Denny
Re: What is renaming my PXE files?
You don't need to edit the source code. You can create a hook for this task and at the end skip the task so that the normal subroutine won't execute anymore. 2015-08-05 0:01 GMT+02:00 John G Heim : > > > On 07/24/2015 05:18 PM, Thomas Lange wrote: > >> On Fri, 24 Jul 2015 11:05:33 -0500, John G Heim >>> said: >>> >> >> > After my FAI install finishes, the PXE boot config file gets >> renamed to >> > .disable. I am guessing fai does that somehow. Can I >> disable >> > that? >> task chboot is logging into the install server and calls fai-chboot >> which disables the pxe config. >> >> You may redefine the subroutine task_chboot, or undefine LOGUSER or >> set $FAI_LOGPROTO to none. But this will also disable saving the log >> files to your install server. >> > > When you say "redefine the subroutine task_chboot," I take it you mean > edit the fai source code, right? Or can you redefine a task subroutine some > other way? I see in the documentation that tasks are defined in > /usr/lib/fai/subroutines. I think I can edit that to fix my problem. But > whatever changes I make will be wiped out if I rebuild the nfsroot, right? >
Problem with CentOS 7 PXE Install
Hello, I've got a little problem with the CentOS PXE Installation. My DHCP/PXE-Server is configured and I'm able to select the centos-installation in the pxe menu. FAI also extract the base-tgz and update the system. But after rebooting the CentOS-Systeme, there are wrong permissions for "/", which are 700 and therefore no user (except for root) is able to login. Now my question: Why are there wrong permissions? Is this wrong in the tgz or is there any process, hook, script which changed them? Thank you very much in advance. Best regards, Denny
Re: Problem with CentOS 7 PXE Install
Hello everyone, I could fix this issue together with Thomas. I'm using a wheezy installation of FAI and this version have got an old version of CENTOS/10-security script. If you replace this with the one from https://github.com/faiproject/fai/tree/master/examples/simple/scripts/CENTOS then everything works like a charm. Thank you Thomas! Greetings, Denny (d3nny) 2015-10-28 13:29 GMT+01:00 Thomas Lange : > >>>>> On Wed, 28 Oct 2015 13:07:10 +0100, Denny Bortfeldt < > de...@bortfeldt.net> said: > > > I've got a little problem with the CentOS PXE Installation. > > My DHCP/PXE-Server is configured and I'm able to select the > > centos-installation in the pxe menu. > Which FAI version are you using? Which PXE menu do you mean? By > default, there's no PXE menu in FAI. > > > > FAI also extract the base-tgz and update the system. But after > rebooting the CentOS-Systeme, > > there are wrong permissions for "/", which are 700 and therefore no > user (except for root) is able to login. > > Now my question: Why are there wrong permissions? Is this wrong in > the tgz or is there any process, hook, script which changed them? > By default when doing a CentOS 7 installation with FAI, during the > first boot of the new system, the system will fix some > attributes/permission on the file systems. Maybe this is not working? > > > Can you please put the fai.log and shell.log of your installation onto > paste.debian.net. If you join the irc channel #fai I can help you much > faster. > -- > regards Thomas >
Problem with GPT Bios Partition
Hello everyone, I'm using FAI 5.0 and need a special partition layout for our centos kvm installation. The partition schema need to be like this: GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 7812456414 3.6T Linux LVM Unfortunately I'm unable to create /dev/sda1 and /dev/sda5 with the disk_config. I don't know what "fstype" I have to enter, that FAI will partitionate /dev/sda1 to "BIOS boot partition" (fdisk type "4"). fstype "efi" and "bios" will run into an error: https://data.bortfeldt.net/f/d9b3239df0/ My current config_disk-File looks like this: # disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid primary - 2 efi - primary swap 8192 swap rw primary /boot 512 ext4 rw,noatime,errors=remount-ro primary / 15360 ext4 rw,noatime,errors=remount-ro logical - 1- - - So is anyone here who can help me out with my disk_configuration so that FAI will partitionate like the schema above? Thanks in advance. Best regards, Denny
Re: Problem with mk-basefile
>> btw I am online Seems like you're on the wrong server. Try using irc.oftc.net. 2015-11-26 17:00 GMT+01:00 Werner Pommerer : > rpm2cpio was installed. During the following actions, > I lost the package rinse. But, when I try now: > > apt-get install rinse > > I get: > Reading package lists... Done > Building dependency tree > Reading state information... Done > Some packages could not be installed. This may mean that you have > requested an impossible situation or if you are using the unstable > distribution that some required packages have not yet been created > or been moved out of Incoming. > The following information may help to resolve the situation: > > The following packages have unmet dependencies: > rinse : Depends: cpio (>= 2.11+dfsg-4.1) but 2.11+dfsg-0.1+deb7u1 is to > be installed > E: Unable to correct problems, you have held broken packages. > > I do not understand, what happened. > btw I am online > > > Regards > > Zitat von Thomas Lange : > > On Thu, 26 Nov 2015 16:28:45 +0100, Werner Pommerer < >>> werner.pomme...@uni-hohenheim.de> said: >>> >> >> > I joined the #fai channel nickname pommerer. But I am not shure >> > how to use it. >> You are not online at the moment. >> >> >> > In the meantime: the answer >> > ./mk-basefile -J CENTOS7_64 >> >> > Extracting: filesystem-3.2-18.el7.x86_64.rpm >> > failed to extract filesystem-3.2-18.el7.x86_64.rpm: 16384 >> cmd: >> > rpm2cpio >> /var/tmp/basefiles.u4JkGb1u/filesystem-3.2-18.el7.x86_64.rpm >> > | (cd /var/tmp/basefiles.u4JkGb1u ; cpio --extract >> > --extract-over-symlinks --make-directories --no-absolute-filenames >> > --preserve-modification-time) 2>/dev/null >/dev/null at >> > /usr/sbin/rinse line 1156. >> OK, I guess you have to install the package rpm2cpio. >> There's a missing dependency in the rinse package, that I have to >> fix. >> >> -- >> regards Thomas >> > > > >
Re: Problem with GPT Bios Partition
Hey Kerim, no not really - my disk_config could be/is wrong. The following schema need to be created by FAI disk_config: GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 7812456414 3.6T Linux LVM But here's the problem: I don't know how. The /dev/sda1 partition don't have got a mount point and is a type "4" in fdisk/gdisk - so I don't know what I need to write in my disk_config so that FAI will use "type 4" in partition layout. /dev/sda2, /dev/sda3 and /dev/sda4 is clear - everything is "primary" and swap or ext4. So what do I need to enter in my disk_config that the result will look like: /dev/sda1 2048 6143 2M BIOS boot partition Thanks in advance :) Best regards, Denny 2015-11-26 17:48 GMT+01:00 Kerim Güney : > Hi Denny, > > there seems to be a mismatch of sorts between your desired schema and what > you're actually describing. I am going to assume you want an EFI partition > that you're going to boot off of. > > To do so, this should work: > > disk_config disk1 disklabel:gpt-bios bootable:1 fstabkey:uuid > > primary /boot/efi 2048 vfat rw > primary swap 8192 swap rw > primary /boot 512 ext4 rw,noatime,errors=remount-ro > primary / 15360 ext4 rw,noatime,errors=remount-ro > logical - 1- - - > > > Best regards > Kerim > > > On 26/11/15 16:19, Denny Bortfeldt wrote: > > Hello everyone, > > I'm using FAI 5.0 and need a special partition layout for our centos kvm > installation. > > The partition schema need to be like this: > > GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G > Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot > /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 > 7812456414 3.6T Linux LVM > Unfortunately I'm unable to create /dev/sda1 and /dev/sda5 with the > disk_config. > I don't know what "fstype" I have to enter, that FAI will partitionate > /dev/sda1 to "BIOS boot partition" (fdisk type "4"). > fstype "efi" and "bios" will run into an error: > https://data.bortfeldt.net/f/d9b3239df0/ > My current config_disk-File looks like this: > # > > disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid > > primary - 2 efi - > primary swap 8192 swap rw > primary /boot 512 ext4 rw,noatime,errors=remount-ro > primary / 15360 ext4 rw,noatime,errors=remount-ro > logical - 1- - - > > > So is anyone here who can help me out with my disk_configuration so that > FAI will partitionate like the schema above? > > Thanks in advance. > > Best regards, > Denny > > > -- > Kerim Güney > > Institut für InformatikJunior Sysadmin > Universität zu KölnLehrstuhl Prof. Dr. M. Jünger > Weyertal 121 > 50931 Köln > >
Re: Problem with GPT Bios Partition
Hello everyone, just a follow-up. With the help from Kerim I could managed my setup. The disk-label "gpt-bios" will create this special 2MB Bios-Partition at the end of the part-layout. It's not neccessary to define it in the disk_config-File. So to create my layout as I mention in the first mail my disk_config looks like this now: # disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid primary swap 8192 swap rw primary /boot 512 ext4 rw,noatime,errors=remount-ro primary / 15360 ext4 rw,noatime,errors=remount-ro Thanks everyone for helping me out! Best regards, Denny 2015-11-26 18:39 GMT+01:00 Kerim Gueney : > Hey Denny, > > Type 4 is 16-bit FAT (up to 32M), I see there's some Microsoft partitions. > Is the first partition perhaps an MBR that was installed along some > previous Windows installation? I only ever see it when I installed Windows > on my machine prior to Linux. Maybe you could do the following: > > disk_config disk1 disklabel:gpt-bios bootable:1 fstabkey:uuid > primary - 2048 msdos rw # (msdos is fat16) > primary swap 8192 swap rw > primary /boot 512 ext4 rw,noatime,errors=remount-ro > primary / 15360 ext4 rw,noatime,errors=remount-ro > logical - 1- - - > > > Best regards > Kerim > > > > On 26.11.2015 18:14, Denny Bortfeldt wrote: > > Hey Kerim, > > no not really - my disk_config could be/is wrong. > The following schema need to be created by FAI disk_config: > > GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G > Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot > /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 > 7812456414 3.6T Linux LVM > > But here's the problem: I don't know how. > The /dev/sda1 partition don't have got a mount point and is a type "4" in > fdisk/gdisk - so I don't know what I need to write in my disk_config so > that FAI will use "type 4" in partition layout. > /dev/sda2, /dev/sda3 and /dev/sda4 is clear - everything is "primary" and > swap or ext4. > > > So what do I need to enter in my disk_config that the result will look > like: > > /dev/sda1 2048 6143 2M BIOS boot partition > > Thanks in advance :) > > Best regards, > Denny > > 2015-11-26 17:48 GMT+01:00 Kerim Güney : > >> Hi Denny, >> >> there seems to be a mismatch of sorts between your desired schema and >> what you're actually describing. I am going to assume you want an EFI >> partition that you're going to boot off of. >> >> To do so, this should work: >> >> disk_config disk1 disklabel:gpt-bios bootable:1 fstabkey:uuid >> >> primary /boot/efi 2048 vfat rw >> primary swap 8192 swap rw >> primary /boot 512 ext4 rw,noatime,errors=remount-ro >> primary / 15360 ext4 rw,noatime,errors=remount-ro >> logical - 1- - - >> >> >> Best regards >> Kerim >> >> >> On 26/11/15 16:19, Denny Bortfeldt wrote: >> >> Hello everyone, >> >> I'm using FAI 5.0 and need a special partition layout for our centos kvm >> installation. >> >> The partition schema need to be like this: >> >> GPT /dev/sda1 2048 6143 2M BIOS boot partition /dev/sda2 6144 16783359 8G >> Linux swap /dev/sda3 16783360 17831935 512M Microsoft basic data /boot >> /dev/sda4 17831936 49289215 15G Microsoft basic data / /dev/sda5 49289216 >> 7812456414 3.6T Linux LVM >> Unfortunately I'm unable to create /dev/sda1 and /dev/sda5 with the >> disk_config. >> I don't know what "fstype" I have to enter, that FAI will partitionate >> /dev/sda1 to "BIOS boot partition" (fdisk type "4"). >> fstype "efi" and "bios" will run into an error: >> https://data.bortfeldt.net/f/d9b3239df0/ >> My current config_disk-File looks like this: >> # >> >> disk_config disk1 disklabel:gpt-bios bootable:3 fstabkey:uuid >> >> primary - 2 efi - >> primary swap 8192 swap rw >> primary /boot 512 ext4 rw,noatime,errors=remount-ro >> primary / 15360 ext4 rw,noatime,errors=remount-ro >> logical - 1- - - >> >> >> So is anyone here who can help me out with my disk_configuration so that >> FAI will partitionate like the schema above? >> >> Thanks in advance. >> >> Best regards, >> Denny >> >> >> -- >> Kerim Güney >> >> Institut für InformatikJunior Sysadmin >> Universität zu KölnLehrstuhl Prof. Dr. M. Jünger >> Weyertal 121 >> 50931 Köln >> >> > >
Problem with DNS DHCP-Name
Hello everyone, I’ve got a little problem with my fai installations. Everytime I install a client via pxe, the name of the vm contains our dns domain. I know that Thomas had a fix for this but I can’t find it anywhere. Can anyone give me a link or a hint for the fix? For example: DNS-Domain: domain.tld VM-Name via DHCP: f00 Name of vm during installation would be: f00.domain.tld Thanks in advance. Best regards, Denny
AW: Problem with DNS DHCP-Name
Thank you Thomas! -Ursprüngliche Nachricht- Von: linux-fai [mailto:linux-fai-boun...@uni-koeln.de] Im Auftrag von Thomas Lange Gesendet: Montag, 13. Juni 2016 15:19 An: fully automatic installation for Linux Betreff: Re: Problem with DNS DHCP-Name >>>>> On Mon, 13 Jun 2016 12:52:54 +, Denny Bortfeldt >>>>> said: > Hello everyone, > I’ve got a little problem with my fai installations. > Everytime I install a client via pxe, the name of the vm contains our dns domain. I know that Thomas had a fix for this but I can’t find it anywhere. > Can anyone give me a link or a hint for the fix? cat <> /srv/fai/nfsroot/etc/fai/fai.conf # use short hostname instead of FQDN export HOSTNAME=\${HOSTNAME%%.*} echo \$HOSTNAME > /proc/sys/kernel/hostname EOF -- regards Thomas
Problem with virtio network boot
Hello everyone, I’ve got a little problem with virtio vms. When I create a new vm with a virtio network card, then the system will get an IP for PXE-Boot, the menu appears and after loading the initrd and vmlinuz, the system hang at: „Starting dhcp for interface eth0 dhcp: PREINIT eth0 up dhcp: FAIL dhcp failed RTNETLINK answers: File exists“ When I create the VM with an e1000 driver everything works fine. We didn’t have this problem with FAI 3, this now happens with FAI 5. Seems like dracut don’t support virtio out of the box? Best regards, Denny
AW: Problem with virtio network boot
Hey, /srv/tftp/fai# lsinitrd initrd.img-3.16.0-4-amd64 | grep virtio -rw-r--r-- 1 root root25872 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/block/virtio_blk.ko -rw-r--r-- 1 root root51376 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/net/virtio_net.ko -rw-r--r-- 1 root root28240 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/scsi/virtio_scsi.ko drwxr-xr-x 2 root root0 Jun 13 16:26 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio -rw-r--r-- 1 root root13512 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio.ko -rw-r--r-- 1 root root20200 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio_pci.ko -rw-r--r-- 1 root root22608 Apr 9 00:54 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio_ring.ko Drivers are included. -Ursprüngliche Nachricht- Von: linux-fai [mailto:linux-fai-boun...@uni-koeln.de] Im Auftrag von Thomas Lange Gesendet: Dienstag, 14. Juni 2016 17:18 An: fully automatic installation for Linux Betreff: Re: Problem with virtio network boot >>>>> On Tue, 14 Jun 2016 15:09:49 +, Denny Bortfeldt >>>>> said: > When I create the VM with an e1000 driver everything works fine. > We didn’t have this problem with FAI 3, this now happens with FAI 5. > Seems like dracut don’t support virtio out of the box? Yes, it should support virtio devices. Use this to check if the drivers are included into the initrd. > lsinitrd /srv/fai/nfsroot/boot/initrd.img-3.16.0-4-amd64 -rw-r--r-- 1 root root25872 Mar 9 05:42 lib/modules/3.16.0-4-amd64/kernel/drivers/block/virtio_blk.ko -rw-r--r-- 1 root root51376 Mar 9 05:41 lib/modules/3.16.0-4-amd64/kernel/drivers/net/virtio_net.ko -rw-r--r-- 1 root root28240 Mar 9 05:41 lib/modules/3.16.0-4-amd64/kernel/drivers/scsi/virtio_scsi.ko drwxr-xr-x 2 root root0 Apr 15 14:33 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio -rw-r--r-- 1 root root13512 Mar 9 05:41 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio.ko -rw-r--r-- 1 root root20200 Mar 9 05:41 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio_pci.ko -rw-r--r-- 1 root root22608 Mar 9 05:41 lib/modules/3.16.0-4-amd64/kernel/drivers/virtio/virtio_ring.ko -- regards Thomas
AW: AW: Problem with virtio network boot
>> but only DHCP is not working Yes and no. It's only not working when booting with virtio network card when dracut is running. The first DHCP request for pxe-boot-menu is received successfully. After that the initrd and stuff is loaded. When dracut is running a dhcp again, then the dhcp fails - I also don't see any traffic anymore from the vm. When I boot with any other card then everything works fine. So I don't think there is a problem with the dhcp-server because if there would one, then also the initial dhcp request would not get an IP and therefore the boot menu wouldn't appear. Best regards, Denny
AW: AW: AW: Problem with virtio network boot
Screenshot attached: https://data.bortfeldt.net/f/84d501dcd7/ Don't know why the interface can't get started. Jun 14 17:57:45 s110077 dnsmasq-dhcp[1840]: DHCPDISCOVER(eth1) 52:54:00:81:ff:41 Jun 14 17:57:45 s110077 dnsmasq-dhcp[1840]: DHCPOFFER(eth1) 10.0.100.108 52:54:00:81:ff:41 Jun 14 17:57:52 s110077 dnsmasq-dhcp[1840]: DHCPDISCOVER(eth1) 52:54:00:81:ff:41 Jun 14 17:57:52 s110077 dnsmasq-dhcp[1840]: DHCPOFFER(eth1) 10.0.100.108 52:54:00:81:ff:41 Jun 14 17:58:06 s110077 dnsmasq-dhcp[1840]: DHCPDISCOVER(eth1) 52:54:00:81:ff:41 Jun 14 17:58:06 s110077 dnsmasq-dhcp[1840]: DHCPOFFER(eth1) 10.0.100.108 52:54:00:81:ff:41 Jun 14 17:58:26 s110077 dnsmasq-dhcp[1840]: DHCPDISCOVER(eth1) 52:54:00:81:ff:41 Jun 14 17:58:26 s110077 dnsmasq-dhcp[1840]: DHCPOFFER(eth1) 10.0.100.108 52:54:00:81:ff:41 DHCPOFFERS also send out all the time.
AW: AW: AW: AW: Problem with virtio network boot
Default timeout are 20 seconds, this is way enough. DHCPOFFERS will be send out but VM don't respect them. This problem only occur with Dracut and virtio network card. With FAI 3 everything worked fine.
AW: AW: AW: AW: AW: Problem with virtio network boot
Hello everyone, I could fix the problem. And here's the solution if you also got the problem: VirtIO driver is included in the initrd, but when the VM boot into dracut the "dhclient" command fails. This happens, because of bad checksums with special software. Currently we use qemu/kvm on out virtualization host and create the vms with "virt-install" and parameter "--pxe" for netboot. During netboot our DHCP-Server (dnsmasq) give the client an IP and this dnsserver got a little bug which was fixed in isc-dhcp already (standard dhcp in fai-installation). So nearly everyone should not have the same problem. There are some solutions to fix the bad checksums bug: - use isc-dhcp - use e1000 driver instead during installation - use an iptables-rule on the virtualization host(!!) -- iptables -A POSTROUTING -t mangle -p udp --dport 68 -j CHECKSUM --checksum-fill Bug-Links: - https://forge.univention.org/bugzilla/show_bug.cgi?id=33160 & https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=717215 A special thanks to Thomas, who helped me a lot with nice hints! Best regards, Denny
Re: LVM not working.
I don't have any problems with installation centos7. But I also don't use LVM. Just the same disk_partition as for debian.
Re: scripts don't execute
Are you sure that your script in /- got chmod +x ? Without execution flag the script will not get executed. 2016-06-24 15:59 GMT+02:00 Ronald Steele : > I’m trying to use scripts to install application software. The scripts > never get executed. > If I embed the same script code into to one of the existing scripts (say > CENTOS) the code works, however any scripts I create are never executed. > The script’s file permissions are the same as the existing scripts. The > class name is defined in .../class/50-host-classes and appears in the log > files in variables.log and fai.log (but never in shell.log). > > Thanks for any ideas. > > Ron > > >
Re: scripts don't execute
Can you upload your fai.log, shell.log and an output of your scripts folder? 2016-06-24 18:48 GMT+02:00 Ronald Steele : > Yes, it’s excitable. That was my first thought too. > ls -l reports > -rwxr-xr-x 1 root root … > > The same permissions are on the directory, which matches all the other > script directories. > > Ron > > > On Jun 24, 2016, at 10:16 AM, Denny Bortfeldt wrote: > > Are you sure that your script in /- got chmod +x ? > Without execution flag the script will not get executed. > > 2016-06-24 15:59 GMT+02:00 Ronald Steele : > >> I’m trying to use scripts to install application software. The scripts >> never get executed. >> If I embed the same script code into to one of the existing scripts (say >> CENTOS) the code works, however any scripts I create are never executed. >> The script’s file permissions are the same as the existing scripts. The >> class name is defined in .../class/50-host-classes and appears in the log >> files in variables.log and fai.log (but never in shell.log). >> >> Thanks for any ideas. >> >> Ron >> >> >> > -- > > Spam > <https://antispam.roaringpenguin.com/canit/b.php?i=0aRaCgUWx&m=114e6b607ad9&t=20160624&c=s> > Phish/Fraud > <https://antispam.roaringpenguin.com/canit/b.php?i=0aRaCgUWx&m=114e6b607ad9&t=20160624&c=p> > Not spam > <https://antispam.roaringpenguin.com/canit/b.php?i=0aRaCgUWx&m=114e6b607ad9&t=20160624&c=n> > Forget previous vote > <https://antispam.roaringpenguin.com/canit/b.php?i=0aRaCgUWx&m=114e6b607ad9&t=20160624&c=f> > > >
RedHat installation via fai
Hello everyone, we did manage to install debian, sles (via autoyast) and centos (base-file) via fai. But now we need also install RedHat. Did anyone manage to install RedHat via fai? If yes, how? Is there a basefile which could be shared? Thanks in advance. Best regards, Denny