[PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
From: Hou Zhiqiang On FSL Layerscape SoCs, the number of lanes assigned to PCIe controller is not fixed, it is determined by the selected SerDes protocol. The current num-lanes indicates the max lanes PCIe controller can support up to, instead of the lanes assigned to the PCIe controller. This can result in PCIe link training fail after hot-reset. Hou Zhiqiang (4): dt-bindings: PCI: designware: Remove the num-lanes from Required properties PCI: dwc: Return directly when num-lanes is not found ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes arm64: dts: fsl: Remove num-lanes property from PCIe nodes Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 - arch/arm/boot/dts/ls1021a.dtsi| 2 -- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi| 1 - arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi| 3 --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi| 6 -- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi| 3 --- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi| 4 drivers/pci/controller/dwc/pcie-designware.c | 6 -- 8 files changed, 4 insertions(+), 22 deletions(-) -- 2.17.1
Re: [PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
On Tue, Aug 20, 2019 at 07:28:37AM +, Z.q. Hou wrote: > From: Hou Zhiqiang > > On FSL Layerscape SoCs, the number of lanes assigned to PCIe > controller is not fixed, it is determined by the selected > SerDes protocol. The current num-lanes indicates the max lanes > PCIe controller can support up to, instead of the lanes assigned > to the PCIe controller. This can result in PCIe link training fail > after hot-reset. > > Hou Zhiqiang (4): > dt-bindings: PCI: designware: Remove the num-lanes from Required > properties > PCI: dwc: Return directly when num-lanes is not found > ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes > arm64: dts: fsl: Remove num-lanes property from PCIe nodes > > Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 - > arch/arm/boot/dts/ls1021a.dtsi| 2 -- > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi| 1 - > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi| 3 --- > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi| 6 -- > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi| 3 --- > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi| 4 > drivers/pci/controller/dwc/pcie-designware.c | 6 -- > 8 files changed, 4 insertions(+), 22 deletions(-) What a mess. I am going to apply these but first if anyone can explain to me what commit 907fce090253 was _supposed_ to to I would be grateful, I read it multiple times but I still have not understood it. This series does the right thing but why things are they way they are in the mainline honestly I have no idea, this does not make any sense in the slightest: ret = of_property_read_u32(np, "num-lanes", &lanes); if (ret) lanes = 0; /* Set the number of lanes */ val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; switch (lanes) { case 1: val |= PORT_LINK_MODE_1_LANES; break; case 2: val |= PORT_LINK_MODE_2_LANES; break; case 4: val |= PORT_LINK_MODE_4_LANES; break; case 8: val |= PORT_LINK_MODE_8_LANES; break; default: dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes); return; } why do we need to set lanes to 0 if num-lanes is not present ? To print an error message ? I really do not understand this code. Lorenzo
Re: [PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
On Thu, Aug 22, 2019 at 05:48:15PM +0100, Lorenzo Pieralisi wrote: > On Tue, Aug 20, 2019 at 07:28:37AM +, Z.q. Hou wrote: > > From: Hou Zhiqiang > > > > On FSL Layerscape SoCs, the number of lanes assigned to PCIe > > controller is not fixed, it is determined by the selected > > SerDes protocol. The current num-lanes indicates the max lanes > > PCIe controller can support up to, instead of the lanes assigned > > to the PCIe controller. This can result in PCIe link training fail > > after hot-reset. > > > > Hou Zhiqiang (4): > > dt-bindings: PCI: designware: Remove the num-lanes from Required > > properties > > PCI: dwc: Return directly when num-lanes is not found > > ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes > > arm64: dts: fsl: Remove num-lanes property from PCIe nodes > > > > Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 - > > arch/arm/boot/dts/ls1021a.dtsi| 2 -- > > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi| 1 - > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi| 3 --- > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi| 6 -- > > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi| 3 --- > > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi| 4 > > drivers/pci/controller/dwc/pcie-designware.c | 6 -- > > 8 files changed, 4 insertions(+), 22 deletions(-) > > What a mess. > > I am going to apply these but first if anyone can explain to > me what commit 907fce090253 was _supposed_ to to I would > be grateful, I read it multiple times but I still have not > understood it. This series does the right thing but why things The DWC controller drivers all implement a .host_init callback - some of the drivers choose to call dw_pcie_setup_rc from their callback which, amongst other things will set up/train the link. As far as I can tell, dw_pcie_setup_rc is the only user of pp->lanes. Therefore for hardware where the link is already set up by firmware and thus dw_pcie_setup_rc is never called - it is unnecessary to read the DT value for pp->lanes. So the first hunk in 907fce090253 gets rid of the error and makes the num-lanes property optional. However this opens up the possibility of a DT misconfiguration for other controllers that do call dw_pcie_setup_rc, i.e. they set num-lanes to 0 when it is required. Therefore the second hunk ensures that an error is emitted when num-lanes was needed but not provided. > are they way they are in the mainline honestly I have no > idea, this does not make any sense in the slightest: > > ret = of_property_read_u32(np, "num-lanes", &lanes); > if (ret) > lanes = 0; Please note that the code below is in a different function to the code above. > > /* Set the number of lanes */ > val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); > val &= ~PORT_LINK_MODE_MASK; > switch (lanes) { > case 1: > val |= PORT_LINK_MODE_1_LANES; > break; > case 2: > val |= PORT_LINK_MODE_2_LANES; > break; > case 4: > val |= PORT_LINK_MODE_4_LANES; > break; > case 8: > val |= PORT_LINK_MODE_8_LANES; > break; > default: > dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes); > return; > } > > why do we need to set lanes to 0 if num-lanes is not present ? To print > an error message ? At this point in time, the controller is trying to train the link but it doesn't know how many lanes, so we need to error. We don't error when reading the device tree earlier - because at that point in time we don't know if num-lanes is optional or not. Thanks, Andrew Murray > > I really do not understand this code. > > Lorenzo
Re: [PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
On Fri, Aug 23, 2019 at 10:44:25AM +0100, Andrew Murray wrote: > On Thu, Aug 22, 2019 at 05:48:15PM +0100, Lorenzo Pieralisi wrote: > > On Tue, Aug 20, 2019 at 07:28:37AM +, Z.q. Hou wrote: > > > From: Hou Zhiqiang > > > > > > On FSL Layerscape SoCs, the number of lanes assigned to PCIe > > > controller is not fixed, it is determined by the selected > > > SerDes protocol. The current num-lanes indicates the max lanes > > > PCIe controller can support up to, instead of the lanes assigned > > > to the PCIe controller. This can result in PCIe link training fail > > > after hot-reset. > > > > > > Hou Zhiqiang (4): > > > dt-bindings: PCI: designware: Remove the num-lanes from Required > > > properties > > > PCI: dwc: Return directly when num-lanes is not found > > > ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes > > > arm64: dts: fsl: Remove num-lanes property from PCIe nodes > > > > > > Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 - > > > arch/arm/boot/dts/ls1021a.dtsi| 2 -- > > > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi| 1 - > > > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi| 3 --- > > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi| 6 -- > > > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi| 3 --- > > > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi| 4 > > > drivers/pci/controller/dwc/pcie-designware.c | 6 -- > > > 8 files changed, 4 insertions(+), 22 deletions(-) > > > > What a mess. > > > > I am going to apply these but first if anyone can explain to > > me what commit 907fce090253 was _supposed_ to to I would > > be grateful, I read it multiple times but I still have not > > understood it. This series does the right thing but why things > > The DWC controller drivers all implement a .host_init callback - > some of the drivers choose to call dw_pcie_setup_rc from their > callback which, amongst other things will set up/train the link. > > As far as I can tell, dw_pcie_setup_rc is the only user of pp->lanes. > Therefore for hardware where the link is already set up by firmware > and thus dw_pcie_setup_rc is never called - it is unnecessary to > read the DT value for pp->lanes. So the first hunk in 907fce090253 > gets rid of the error and makes the num-lanes property optional. > > However this opens up the possibility of a DT misconfiguration for > other controllers that do call dw_pcie_setup_rc, i.e. they set > num-lanes to 0 when it is required. Therefore the second hunk > ensures that an error is emitted when num-lanes was needed but not > provided. Yes, the problem is not 907fce090253, it is subsequent changes (ie feb85d9b1c47 AFAICS). > > are they way they are in the mainline honestly I have no > > idea, this does not make any sense in the slightest: > > > > ret = of_property_read_u32(np, "num-lanes", &lanes); > > if (ret) > > lanes = 0; > > Please note that the code below is in a different function to the > code above. In the mainline kernel they are in the same function ie dw_pcie_setup() and as reported here current code does not make any sense. Anyway merging these patches, thanks for having a look. Lorenzo > > /* Set the number of lanes */ > > val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL); > > val &= ~PORT_LINK_MODE_MASK; > > switch (lanes) { > > case 1: > > val |= PORT_LINK_MODE_1_LANES; > > break; > > case 2: > > val |= PORT_LINK_MODE_2_LANES; > > break; > > case 4: > > val |= PORT_LINK_MODE_4_LANES; > > break; > > case 8: > > val |= PORT_LINK_MODE_8_LANES; > > break; > > default: > > dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes); > > return; > > } > > > > why do we need to set lanes to 0 if num-lanes is not present ? To print > > an error message ? > > At this point in time, the controller is trying to train the link but > it doesn't know how many lanes, so we need to error. We don't error when > reading the device tree earlier - because at that point in time we don't > know if num-lanes is optional or not. > > Thanks, > > Andrew Murray > > > > > I really do not understand this code. > > > > Lorenzo
Re: [PATCHv2 0/4] Layerscape: Remove num-lanes property from PCIe nodes
On Tue, Aug 20, 2019 at 07:28:37AM +, Z.q. Hou wrote: > From: Hou Zhiqiang > > On FSL Layerscape SoCs, the number of lanes assigned to PCIe > controller is not fixed, it is determined by the selected > SerDes protocol. The current num-lanes indicates the max lanes > PCIe controller can support up to, instead of the lanes assigned > to the PCIe controller. This can result in PCIe link training fail > after hot-reset. > > Hou Zhiqiang (4): > dt-bindings: PCI: designware: Remove the num-lanes from Required > properties > PCI: dwc: Return directly when num-lanes is not found > ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes > arm64: dts: fsl: Remove num-lanes property from PCIe nodes > > Documentation/devicetree/bindings/pci/designware-pcie.txt | 1 - > arch/arm/boot/dts/ls1021a.dtsi| 2 -- > arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi| 1 - > arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi| 3 --- > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi| 6 -- > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi| 3 --- > arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi| 4 > drivers/pci/controller/dwc/pcie-designware.c | 6 -- > 8 files changed, 4 insertions(+), 22 deletions(-) Applied to pci/dwc for v5.4, thanks. Lorenzo