Re: [PATCH] media: rc: mtk-cir: use of_device_get_match_data()
On Mon, 2018-04-16 at 10:34 +0800, Ryder Lee wrote: > The usage of of_device_get_match_data() reduce the code size a bit. > > Signed-off-by: Ryder Lee <ryder@mediatek.com> > --- > drivers/media/rc/mtk-cir.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c > index e88eb64..e42efd9 100644 > --- a/drivers/media/rc/mtk-cir.c > +++ b/drivers/media/rc/mtk-cir.c > @@ -299,8 +299,6 @@ static int mtk_ir_probe(struct platform_device *pdev) > { > struct device *dev = >dev; > struct device_node *dn = dev->of_node; > - const struct of_device_id *of_id = > - of_match_device(mtk_ir_match, >dev); > struct resource *res; > struct mtk_ir *ir; > u32 val; > @@ -312,7 +310,7 @@ static int mtk_ir_probe(struct platform_device *pdev) > return -ENOMEM; > > ir->dev = dev; > - ir->data = of_id->data; > + ir->data = of_device_get_match_data(dev); > > ir->clk = devm_clk_get(dev, "clk"); > if (IS_ERR(ir->clk)) { Acked-by: Sean Wang <sean.w...@mediatek.com>
Re: [PATCH v1 0/4] media: rc: add support for IR receiver on MT7622 SoC
Hi, Mauro and Sean Just a gentle ping on the whole patchset porting MediaTek CIR to another platform. Sean On Tue, 2017-07-04 at 19:10 +0900, Andi Shyti wrote: > Hi Sean, > > > This patchset introduces Consumer IR (CIR) support for MT7622 SoC > > implements raw mode for more compatibility with different protocols > > as previously SoC did. Before adding support to MT7622 SoC, extra > > code refactor is done since there're major differences in register and > > field definition from the previous SoC. > > > > Sean Wang (4): > > dt-bindings: media: mtk-cir: Add support for MT7622 SoC > > media: rc: mtk-cir: add platform data to adapt into various hardware > > media: rc: mtk-cir: add support for MediaTek MT7622 SoC > > MAINTAINERS: add entry for MediaTek CIR driver > > for the whole patchset: > > Reviewed-by: Andi Shyti <andi.sh...@samsung.com> > > Andi
Re: [PATCH v3 2/3] Documentation: devicetree: Add document bindings for mtk-cir
On Wed, 2017-01-18 at 16:42 -0600, Rob Herring wrote: > On Wed, Jan 18, 2017 at 4:23 PM, Rob Herring <r...@kernel.org> wrote: > > On Fri, Jan 13, 2017 at 03:35:38PM +0800, sean.w...@mediatek.com wrote: > >> From: Sean Wang <sean.w...@mediatek.com> > >> > >> This patch adds documentation for devicetree bindings for > >> consumer Mediatek IR controller. > >> > >> Signed-off-by: Sean Wang <sean.w...@mediatek.com> > >> --- > >> .../devicetree/bindings/media/mtk-cir.txt | 24 > >> ++ > >> 1 file changed, 24 insertions(+) > >> create mode 100644 Documentation/devicetree/bindings/media/mtk-cir.txt > > > > Acked-by: Rob Herring <r...@kernel.org> > > I guess I rescind my ack if this email doesn't work: > > "The response from the remote server was: > > 550 Relaying mail to sean.w...@mediatek.com is not allowed" sorry for causing you inconvenience. it should be able to work because i almost use this daily maybe that's just a sudden problem from internal server (?) but if the problem still continues, please let me know and i will try to fix this. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
okay, I will continue to work based on your changes unless someone else has concerns On Wed, 2017-01-11 at 07:45 +0900, Andi Shyti wrote: > Hi Sean, > > >include/linux/compiler.h:253:8: sparse: attribute 'no_sanitize_address': > > unknown attribute > > >> drivers/media/rc/mtk-cir.c:215:41: sparse: too many arguments for > > >> function devm_rc_allocate_device > >drivers/media/rc/mtk-cir.c: In function 'mtk_ir_probe': > >drivers/media/rc/mtk-cir.c:215:11: error: too many arguments to function > > 'devm_rc_allocate_device' > > ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW); > > ^~~ > >In file included from drivers/media/rc/mtk-cir.c:22:0: > >include/media/rc-core.h:213:16: note: declared here > > struct rc_dev *devm_rc_allocate_device(struct device *dev); > >^~~ > > > > vim +/devm_rc_allocate_device +215 drivers/media/rc/mtk-cir.c > > > >209 ir->base = devm_ioremap_resource(dev, res); > >210 if (IS_ERR(ir->base)) { > >211 dev_err(dev, "failed to map registers\n"); > >212 return PTR_ERR(ir->base); > >213 } > >214 > > > 215 ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW); > > this error comes because the patches I pointed out have not been > applied yet. I guess you can ignore them as long as you tested > yours on top those patches. > > Andi -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
t; > + ir->rc->input_id.vendor = 0x0001; > > > > + ir->rc->input_id.product = 0x0001; > > > > + ir->rc->input_id.version = 0x0001; > > > > + map_name = of_get_property(dn, "linux,rc-map-name", NULL); > > > > + ir->rc->map_name = map_name ?: RC_MAP_EMPTY; > > > > + ir->rc->dev.parent = dev; > > > > + ir->rc->driver_name = MTK_IR_DEV; > > > > + ir->rc->allowed_protocols = RC_BIT_ALL; > > > > + ir->rc->rx_resolution = MTK_IR_SAMPLE; > > > > + ir->rc->timeout = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1); > > > > + > > > > + ret = devm_rc_register_device(dev, ir->rc); > > > > > > Here you do devm_rc_register_device() > > > > does it have problem ? > > Sorry, no. I just wanted to highlight wrt a comment below. > > > > > > > > + if (ret) { > > > > + dev_err(dev, "failed to register rc device\n"); > > > > + return ret; > > > > + } > > > > + > > > > + platform_set_drvdata(pdev, ir); > > > > + > > > > + ir->irq = platform_get_irq(pdev, 0); > > > > + if (ir->irq < 0) { > > > > + dev_err(dev, "no irq resource\n"); > > > > + return -ENODEV; > > > > + } > > > > + > > > > + /* Enable interrupt after proper hardware > > > > +* setup and IRQ handler registration > > > > +*/ > > > > + if (clk_prepare_enable(ir->clk)) { > > > > + dev_err(dev, "try to enable ir_clk failed\n"); > > > > + ret = -EINVAL; > > > > + goto exit_clkdisable_clk; > > > > + } > > > > + > > > > + mtk_irq_disable(ir, MTK_IRINT_EN); > > > > + > > > > + ret = devm_request_irq(dev, ir->irq, mtk_ir_irq, 0, MTK_IR_DEV, > > > > ir); > > > > + if (ret) { > > > > + dev_err(dev, "failed request irq\n"); > > > > + goto exit_clkdisable_clk; > > > > + } > > > > + > > > > + /* Enable IR and PWM */ > > > > + val = mtk_r32(ir, MTK_CONFIG_HIGH_REG); > > > > + val |= MTK_PWM_EN | MTK_IR_EN; > > > > + mtk_w32(ir, val, MTK_CONFIG_HIGH_REG); > > > > + > > > > + /* Setting sample period */ > > > > + mtk_w32_mask(ir, MTK_CHK_PERIOD, MTK_CHK_PERIOD_MASK, > > > > +MTK_CONFIG_LOW_REG); > > > > + > > > > + mtk_irq_enable(ir, MTK_IRINT_EN); > > > > + > > > > + dev_info(dev, "Initialized MT7623 IR driver, sample period = > > > > %luus\n", > > > > +DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, 1000)); > > > > + > > > > + return 0; > > > > + > > > > +exit_clkdisable_clk: > > > > + clk_disable_unprepare(ir->clk); > > > > + > > > > + return ret; > > > > +} > > > > + > > > > +static int mtk_ir_remove(struct platform_device *pdev) > > > > +{ > > > > + struct mtk_ir *ir = platform_get_drvdata(pdev); > > > > + > > > > + /* Avoid contention between remove handler and > > > > +* IRQ handler so that disabling IR interrupt and > > > > +* waiting for pending IRQ handler to complete > > > > +*/ > > > > + mtk_irq_disable(ir, MTK_IRINT_EN); > > > > + synchronize_irq(ir->irq); > > > > + > > > > + clk_disable_unprepare(ir->clk); > > > > + > > > > + rc_unregister_device(ir->rc); > > > > > > Yet here you explicitly call rc_unregister_device(). Since it was > > > registered > > > with the devm call, this call is not needed and will lead to double frees > > > etc > > > > bug :( . I will fix it .. > > > > > > + > > > > + return 0; > > > > +} > > > > + > > > > +static const struct of_device_id mtk_ir_match[] = { > > > > + { .compatible = "mediatek,mt7623-cir" }, > > > > + {}, > > > > +}; > > > > +MODULE_DEVICE_TABLE(of, mtk_ir_match); > > > > + > > > > +static struct platform_driver mtk_ir_driver = { > > > > + .probe = mtk_ir_probe, > > > > + .remove = mtk_ir_remove, > > > > + .driver = { > > > > + .name = MTK_IR_DEV, > > > > + .of_match_table = mtk_ir_match, > > > > + }, > > > > +}; > > > > + > > > > +module_platform_driver(mtk_ir_driver); > > > > + > > > > +MODULE_DESCRIPTION("Mediatek IR Receiver Controller Driver"); > > > > +MODULE_AUTHOR("Sean Wang <sean.w...@mediatek.com>"); > > > > +MODULE_LICENSE("GPL"); > > > > -- > > > > 2.7.4 > > > > > > > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-media" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
meout = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1); > > + > > + ret = devm_rc_register_device(dev, ir->rc); > > Here you do devm_rc_register_device() does it have problem ? > > + if (ret) { > > + dev_err(dev, "failed to register rc device\n"); > > + return ret; > > + } > > + > > + platform_set_drvdata(pdev, ir); > > + > > + ir->irq = platform_get_irq(pdev, 0); > > + if (ir->irq < 0) { > > + dev_err(dev, "no irq resource\n"); > > + return -ENODEV; > > + } > > + > > + /* Enable interrupt after proper hardware > > +* setup and IRQ handler registration > > +*/ > > + if (clk_prepare_enable(ir->clk)) { > > + dev_err(dev, "try to enable ir_clk failed\n"); > > + ret = -EINVAL; > > + goto exit_clkdisable_clk; > > + } > > + > > + mtk_irq_disable(ir, MTK_IRINT_EN); > > + > > + ret = devm_request_irq(dev, ir->irq, mtk_ir_irq, 0, MTK_IR_DEV, ir); > > + if (ret) { > > + dev_err(dev, "failed request irq\n"); > > + goto exit_clkdisable_clk; > > + } > > + > > + /* Enable IR and PWM */ > > + val = mtk_r32(ir, MTK_CONFIG_HIGH_REG); > > + val |= MTK_PWM_EN | MTK_IR_EN; > > + mtk_w32(ir, val, MTK_CONFIG_HIGH_REG); > > + > > + /* Setting sample period */ > > + mtk_w32_mask(ir, MTK_CHK_PERIOD, MTK_CHK_PERIOD_MASK, > > +MTK_CONFIG_LOW_REG); > > + > > + mtk_irq_enable(ir, MTK_IRINT_EN); > > + > > + dev_info(dev, "Initialized MT7623 IR driver, sample period = %luus\n", > > +DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, 1000)); > > + > > + return 0; > > + > > +exit_clkdisable_clk: > > + clk_disable_unprepare(ir->clk); > > + > > + return ret; > > +} > > + > > +static int mtk_ir_remove(struct platform_device *pdev) > > +{ > > + struct mtk_ir *ir = platform_get_drvdata(pdev); > > + > > + /* Avoid contention between remove handler and > > +* IRQ handler so that disabling IR interrupt and > > +* waiting for pending IRQ handler to complete > > +*/ > > + mtk_irq_disable(ir, MTK_IRINT_EN); > > + synchronize_irq(ir->irq); > > + > > + clk_disable_unprepare(ir->clk); > > + > > + rc_unregister_device(ir->rc); > > Yet here you explicitly call rc_unregister_device(). Since it was registered > with the devm call, this call is not needed and will lead to double frees etc bug :( . I will fix it .. > > + > > + return 0; > > +} > > + > > +static const struct of_device_id mtk_ir_match[] = { > > + { .compatible = "mediatek,mt7623-cir" }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, mtk_ir_match); > > + > > +static struct platform_driver mtk_ir_driver = { > > + .probe = mtk_ir_probe, > > + .remove = mtk_ir_remove, > > + .driver = { > > + .name = MTK_IR_DEV, > > + .of_match_table = mtk_ir_match, > > + }, > > +}; > > + > > +module_platform_driver(mtk_ir_driver); > > + > > +MODULE_DESCRIPTION("Mediatek IR Receiver Controller Driver"); > > +MODULE_AUTHOR("Sean Wang <sean.w...@mediatek.com>"); > > +MODULE_LICENSE("GPL"); > > -- > > 2.7.4 > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] Documentation: devicetree: Add document bindings for mtk-cir
Hi Rob, thanks for your effort for reviewing. I added comments inline. On Mon, 2017-01-09 at 12:32 -0600, Rob Herring wrote: > On Fri, Jan 06, 2017 at 12:06:23AM +0800, sean.w...@mediatek.com wrote: > > From: Sean Wang <sean.w...@mediatek.com> > > > > This patch adds documentation for devicetree bindings for > > Mediatek IR controller. > > > > Signed-off-by: Sean Wang <sean.w...@mediatek.com> > > --- > > .../devicetree/bindings/media/mtk-cir.txt | 23 > > ++ > > 1 file changed, 23 insertions(+) > > create mode 100644 > > linux-4.8.rc1_p0/Documentation/devicetree/bindings/media/mtk-cir.txt > > > > diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt > > b/Documentation/devicetree/bindings/media/mtk-cir.txt > > new file mode 100644 > > index 000..bbedd71 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/mtk-cir.txt > > @@ -0,0 +1,23 @@ > > +Device-Tree bindings for Mediatek IR controller found in Mediatek SoC > > family > > + > > +Required properties: > > +- compatible : "mediatek,mt7623-ir" > > +- clocks : list of clock specifiers, corresponding to > > + entries in clock-names property; > > +- clock-names : should contain "clk" entries; > > +- interrupts : should contain IR IRQ number; > > +- reg : should contain IO map address for IR. > > + > > +Optional properties: > > +- linux,rc-map-name : Remote control map name. > > Would 'label' be appropriate here instead? If not, this needs to be > documented in a common location and explained better. > I checked with how the way applied in other IR drivers is and found that most IR driver also use the same label to identify the scan/key table they prefer to use such as gpio-ir-recv, ir-hix5hd2, meson-ir and sunxi-cir or use hard coding inside the driver. So I thought it should be appropriate here currently. > > + > > +Example: > > + > > +cir: cir@0x10013000 { > > Drop the '0x'. > okay, I will. > > + compatible = "mediatek,mt7623-ir"; > > + reg = <0 0x10013000 0 0x1000>; > > + interrupts = ; > > + clocks = < CLK_INFRA_IRRX>; > > + clock-names = "clk"; > > + linux,rc-map-name = "rc-rc6-mce"; > > +}; > > -- > > 1.9.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
On Sun, 2017-01-08 at 21:16 +, Sean Young wrote: > Hi Sean, > > On Fri, Jan 06, 2017 at 03:31:25PM +0800, Sean Wang wrote: > > On Thu, 2017-01-05 at 17:12 +, Sean Young wrote: > > > On Fri, Jan 06, 2017 at 12:06:24AM +0800, sean.w...@mediatek.com wrote: > > > > + /* Handle pulse and space until end of message */ > > > > + for (i = 0 ; i < MTK_CHKDATA_SZ ; i++) { > > > > + val = mtk_r32(ir, MTK_CHKDATA_REG(i)); > > > > + dev_dbg(ir->dev, "@reg%d=0x%08x\n", i, val); > > > > + > > > > + for (j = 0 ; j < 4 ; j++) { > > > > + wid = (val & (0xff << j * 8)) >> j * 8; > > > > + rawir.pulse = !rawir.pulse; > > > > + rawir.duration = wid * (MTK_IR_SAMPLE + 1); > > > > + ir_raw_event_store_with_filter(ir->rc, ); > > > > + > > > > + if (MTK_IR_END(wid)) > > > > + goto end_msg; > > > > + } > > > > + } > > > > > > If I read this correctly, there is a maximum of 17 * 4 = 68 edges per > > > IR message. The rc6 mce key 0 (scancode 0x800f0400) is 69 edges, so that > > > won't work. > > > > > Uh, this is related to hardware limitation. Maximum number hardware > > holds indeed is only 68 edges as you said :( > > > > For the case, I will try change the logic into that the whole message > > is dropped if no end of message is seen within 68 counts to avoid > > wasting CPU for decoding. > > I'm not sure it is worthwhile dropping the IR in that case. The processing > is minimal and it might be possible that we have just enough IR to decode > a scancode even if the trailing end of message is missing. Note that > the call to ir_raw_event_set_idle() will generate an timeout IR event, so > there will always be an end of message marker. 1) I agree with you :) The original logic I made already as you pointed out is sent incomplete IR message to let ir-raw try to decode as possible. 2) I had another question. I found multiple and same IR messages being received when using SONY remote controller. Should driver needs to report each message or only one of these to the upper layer ? > All I wanted to do was point out a limitation in case there is a > workaround; if there is not then we might as well make do with the IR > we do have. I also will leave some words about limitation we had in the comments. > Thanks > Sean -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
Hi Andi, Thank for your reminder. I will refine the code based on your work. to have elegant code and easy error handling. Sean On Fri, 2017-01-06 at 12:43 +0900, Andi Shyti wrote: > Hi Sean, > > > + ir->rc = rc_allocate_device(); > > Yes, you should use devm_rc_allocate_device(...) > > Besides, standing to this patch which is not in yet: > > https://lkml.org/lkml/2016/12/18/39 > > rc_allocate_device should provide the driver type during > allocation, so it should be: > > ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW); > > and this line can be removed: > > > + ir->rc->driver_type = RC_DRIVER_IR_RAW; > > I don't know when Mauro will take the patch above. > > Andi -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC
Hi Sean, Thanks for your effort for code reviewing. I add comments inline. On Thu, 2017-01-05 at 17:12 +, Sean Young wrote: > Hi Sean, > > Some review comments. > > On Fri, Jan 06, 2017 at 12:06:24AM +0800, sean.w...@mediatek.com wrote: > > From: Sean Wang <sean.w...@mediatek.com> > > > > This patch adds driver for IR controller on > > Mediatek MT7623 SoC. Currently testing successfully > > on NEC and SONY remote controller only but it should > > work on others (lirc, rc-5 and rc-6). > > > > Signed-off-by: Sean Wang <sean.w...@mediatek.com> > > --- > > drivers/media/rc/Kconfig | 10 ++ > > drivers/media/rc/Makefile | 1 + > > drivers/media/rc/mtk-cir.c | 319 > > + > > 3 files changed, 330 insertions(+) > > create mode 100644 linux-4.8.rc1_p0/drivers/media/rc/mtk-cir.c > > > > diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig > > index 370e16e..626c500 100644 > > --- a/drivers/media/rc/Kconfig > > +++ b/drivers/media/rc/Kconfig > > @@ -389,4 +389,14 @@ config IR_SUNXI > >To compile this driver as a module, choose M here: the module will > >be called sunxi-ir. > > > > +config IR_MTK > > + tristate "Mediatek IR remote control" > > + depends on RC_CORE > > + depends on ARCH_MEDIATEK || COMPILE_TEST > > + ---help--- > > + Say Y if you want to use Mediatek internal IR Controller > > + > > + To compile this driver as a module, choose M here: the module will > > + be called mtk-cir. > > + > > endif #RC_DEVICES > > diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile > > index 379a5c0..505908d 100644 > > --- a/drivers/media/rc/Makefile > > +++ b/drivers/media/rc/Makefile > > @@ -37,3 +37,4 @@ obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o > > obj-$(CONFIG_RC_ST) += st_rc.o > > obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o > > obj-$(CONFIG_IR_IMG) += img-ir/ > > +obj-$(CONFIG_IR_MTK) += mtk-cir.o > > diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c > > new file mode 100644 > > index 000..4fa4cab > > --- /dev/null > > +++ b/drivers/media/rc/mtk-cir.c > > @@ -0,0 +1,319 @@ > > +/* > > + * Driver for Mediatek MT7623 IR Receiver Controller > > + * > > + * Copyright (C) 2017 Sean Wang <sean.w...@mediatek.com> > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of > > + * the License, or (at your option) any later version. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define MTK_IR_DEV "mtk-ir" > > KBUILD_MODNAME could be used instead. Currently the module is called > mtk-cir but the rc device will have driver name mtk-ir. okay. i will use this instead of this insistent coding. > > + > > +/* Register to enable PWM and IR */ > > +#define MTK_CONFIG_HIGH_REG 0x0c > > +/* Enable IR pulse width detection */ > > +#define MTK_PWM_EN BIT(13) > > +/* Enable IR hardware function */ > > +#define MTK_IR_ENBIT(0) > > + > > +/* Register to setting sample period */ > > +#define MTK_CONFIG_LOW_REG0x10 > > +/* Field to set sample period */ > > +#define CHK_PERIOD 0xC00 > > +#define MTK_CHK_PERIOD(((CHK_PERIOD) << 8) & (GENMASK(20, 8))) > > +#define MTK_CHK_PERIOD_MASK (GENMASK(20, 8)) > > + > > +/* Register to clear state of state machine */ > > +#define MTK_IRCLR_REG 0x20 > > +/* Bit to restart IR receiving */ > > +#define MTK_IRCLRBIT(0) > > + > > +/* Register containing pulse width data */ > > +#define MTK_CHKDATA_REG(i)(0x88 + 4 * i) > > + > > +/* Register to enable IR interrupt */ > > +#define MTK_IRINT_EN_REG 0xcc > > +/* Bit to enable interrupt */ > > +#define MTK_IRINT_EN BIT(0) > > + > > +/* Register to ack IR interrupt */ > > +#define MTK_IRINT_CLR_