Re: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
Hello. On 14-03-2014 5:57, Peter Chen wrote: According to Power_ePAPR_APPROVED_v1.1.pdf "ethernet-phy" is the node name, it is the same with Sergei's suggestion. Nobody's talking about "ehternet-phy" here. Hmm, you take "ethernet-phy" as an example, and suggest changing to "usb-phy" at last email. Then it's a wrong mail. I'm not mixing nodes and properties. But you have changed the property name at this patch, in fact, "fsl,usbphy" is ok for property name, "fsl,usb-phy" may be better, but not worth a patch to change it. No, it's not better and both are not OK because they're still Freescale specific while the de-facto standard property "usb-phy" is already used by other USB drivers for the same purpose. Am I missing something, property name should be the same for all platforms? If they're doing the same standard thing, yes. Peter WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
> > > According to Power_ePAPR_APPROVED_v1.1.pdf "ethernet-phy" is the node > > name, it is the same with Sergei's suggestion. > > Nobody's talking about "ehternet-phy" here. > Hmm, you take "ethernet-phy" as an example, and suggest changing to "usb-phy" at last email. > > But you have changed the property name at this patch, in fact, > "fsl,usbphy" > > is ok for property name, "fsl,usb-phy" may be better, but not worth a > > patch to change it. > > No, it's not better and both are not OK because they're still > Freescale specific while the de-facto standard property "usb-phy" is > already used by other USB drivers for the same purpose. Am I missing something, property name should be the same for all platforms? At Power_ePAPR_APPROVED_v1.1, page 18, the example property name like below: fsl,channel-fifo-len ibm,ppc-interrupt-server#s linux,network-index Peter -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
Hello. On 13-03-2014 7:17, Peter Chen wrote: It also adapt the dts that uses it. Signed-off-by: Denis Carikli [...] According to Power_ePAPR_APPROVED_v1.1.pdf "ethernet-phy" is the node name, it is the same with Sergei's suggestion. Nobody's talking about "ehternet-phy" here. But you have changed the property name at this patch, in fact, "fsl,usbphy" is ok for property name, "fsl,usb-phy" may be better, but not worth a patch to change it. No, it's not better and both are not OK because they're still Freescale specific while the de-facto standard property "usb-phy" is already used by other USB drivers for the same purpose. Peter WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
> > It also adapt the dts that uses it. > > Signed-off-by: Denis Carikli > --- > arch/arm/boot/dts/imx23.dtsi |2 +- > arch/arm/boot/dts/imx27.dtsi |4 ++-- > arch/arm/boot/dts/imx28.dtsi |4 ++-- > arch/arm/boot/dts/imx51.dtsi |2 +- > arch/arm/boot/dts/imx53.dtsi |4 ++-- > arch/arm/boot/dts/imx6qdl.dtsi |4 ++-- > arch/arm/boot/dts/imx6sl.dtsi |4 ++-- > drivers/usb/chipidea/ci_hdrc_imx.c |2 +- > 8 files changed, 13 insertions(+), 13 deletions(-) > > diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi > index bbcfb5a..e3c9924 100644 > --- a/arch/arm/boot/dts/imx23.dtsi > +++ b/arch/arm/boot/dts/imx23.dtsi > @@ -522,7 +522,7 @@ > compatible = "fsl,imx23-usb", "fsl,imx27-usb"; > reg = <0x8008 0x4>; > interrupts = <11>; > - fsl,usbphy = <&usbphy0>; > + usb-phy = <&usbphy0>; > clocks = <&clks 40>; > status = "disabled"; > }; > diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi > index 83a8247..94bcf1a 100644 > --- a/arch/arm/boot/dts/imx27.dtsi > +++ b/arch/arm/boot/dts/imx27.dtsi > @@ -466,7 +466,7 @@ > interrupts = <56>; > clocks = <&clks 15>; > fsl,usbmisc = <&usbmisc 0>; > - fsl,usbphy = <&usbphy0>; > + usb-phy = <&usbphy0>; > status = "disabled"; > }; > > @@ -485,7 +485,7 @@ > interrupts = <55>; > clocks = <&clks 15>; > fsl,usbmisc = <&usbmisc 2>; > - fsl,usbphy = <&usbphy2>; > + usb-phy = <&usbphy2>; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index 90a5795..52ad72f 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -1143,7 +1143,7 @@ > reg = <0x8008 0x1>; > interrupts = <93>; > clocks = <&clks 60>; > - fsl,usbphy = <&usbphy0>; > + usb-phy = <&usbphy0>; > status = "disabled"; > }; > > @@ -1152,7 +1152,7 @@ > reg = <0x8009 0x1>; > interrupts = <92>; > clocks = <&clks 61>; > - fsl,usbphy = <&usbphy1>; > + usb-phy = <&usbphy1>; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi > index cb3204a..b290947 100644 > --- a/arch/arm/boot/dts/imx51.dtsi > +++ b/arch/arm/boot/dts/imx51.dtsi > @@ -249,7 +249,7 @@ > interrupts = <18>; > clocks = <&clks IMX5_CLK_USBOH3_GATE>; > fsl,usbmisc = <&usbmisc 0>; > - fsl,usbphy = <&usbphy0>; > + usb-phy = <&usbphy0>; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi > index f0962e5..b10a3de 100644 > --- a/arch/arm/boot/dts/imx53.dtsi > +++ b/arch/arm/boot/dts/imx53.dtsi > @@ -276,7 +276,7 @@ > interrupts = <18>; > clocks = <&clks IMX5_CLK_USBOH3_GATE>; > fsl,usbmisc = <&usbmisc 0>; > - fsl,usbphy = <&usbphy0>; > + usb-phy = <&usbphy0>; > status = "disabled"; > }; > > @@ -286,7 +286,7 @@ > interrupts = <14>; > clocks = <&clks IMX5_CLK_USBOH3_GATE>; > fsl,usbmisc = <&usbmisc 1>; > - fsl,usbphy = <&usbphy1>; > + usb-phy = <&usbphy1>; > status = "disabled"; > }; > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi > b/arch/arm/boot/dts/imx6qdl.dtsi index cfc85be..d2f0087 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -789,7 +789,7 @@ > reg = <0x02184000 0x200>; > interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks 162>; > - fsl,usbphy = <&usbphy1>; > + usb-phy = <&usbphy1>; > fsl,usbmisc = <&usbmis
Re: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
Среда, 12 марта 2014, 11:19 +01:00 от Lothar Waßmann : > Hi, > > Denis Carikli wrote: > > This converts the Chipidea usbmisc driver to > > use the standard usb-phy property. > > > [...] > > diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c > > b/drivers/usb/chipidea/ci_hdrc_imx.c > > index c00f772..9a74100 100644 > > --- a/drivers/usb/chipidea/ci_hdrc_imx.c > > +++ b/drivers/usb/chipidea/ci_hdrc_imx.c > > @@ -130,7 +130,7 @@ static int ci_hdrc_imx_probe(struct platform_device > > *pdev) > > return ret; > > } > > > > - data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); > > + data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); > > if (IS_ERR(data->phy)) { > > ret = PTR_ERR(data->phy); > > goto err_clk; > > > How about accepting the old property too and print a warning, that it is > deprecated, rather than breaking all existing DT blobs? And this change should be reflected in the bindings documentation. ---
Re: [PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
Hi, Denis Carikli wrote: > This converts the Chipidea usbmisc driver to > use the standard usb-phy property. > [...] > diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c > b/drivers/usb/chipidea/ci_hdrc_imx.c > index c00f772..9a74100 100644 > --- a/drivers/usb/chipidea/ci_hdrc_imx.c > +++ b/drivers/usb/chipidea/ci_hdrc_imx.c > @@ -130,7 +130,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) > return ret; > } > > - data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0); > + data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); > if (IS_ERR(data->phy)) { > ret = PTR_ERR(data->phy); > goto err_clk; > How about accepting the old property too and print a warning, that it is deprecated, rather than breaking all existing DT blobs? Lothar Waßmann -- ___ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | i...@karo-electronics.de ___ -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v3][ 3/9] usb: chipidea: Use standard usb-phy property.
This converts the Chipidea usbmisc driver to use the standard usb-phy property. It also adapt the dts that uses it. Signed-off-by: Denis Carikli --- arch/arm/boot/dts/imx23.dtsi |2 +- arch/arm/boot/dts/imx27.dtsi |4 ++-- arch/arm/boot/dts/imx28.dtsi |4 ++-- arch/arm/boot/dts/imx51.dtsi |2 +- arch/arm/boot/dts/imx53.dtsi |4 ++-- arch/arm/boot/dts/imx6qdl.dtsi |4 ++-- arch/arm/boot/dts/imx6sl.dtsi |4 ++-- drivers/usb/chipidea/ci_hdrc_imx.c |2 +- 8 files changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index bbcfb5a..e3c9924 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -522,7 +522,7 @@ compatible = "fsl,imx23-usb", "fsl,imx27-usb"; reg = <0x8008 0x4>; interrupts = <11>; - fsl,usbphy = <&usbphy0>; + usb-phy = <&usbphy0>; clocks = <&clks 40>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 83a8247..94bcf1a 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -466,7 +466,7 @@ interrupts = <56>; clocks = <&clks 15>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; + usb-phy = <&usbphy0>; status = "disabled"; }; @@ -485,7 +485,7 @@ interrupts = <55>; clocks = <&clks 15>; fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; + usb-phy = <&usbphy2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 90a5795..52ad72f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1143,7 +1143,7 @@ reg = <0x8008 0x1>; interrupts = <93>; clocks = <&clks 60>; - fsl,usbphy = <&usbphy0>; + usb-phy = <&usbphy0>; status = "disabled"; }; @@ -1152,7 +1152,7 @@ reg = <0x8009 0x1>; interrupts = <92>; clocks = <&clks 61>; - fsl,usbphy = <&usbphy1>; + usb-phy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index cb3204a..b290947 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -249,7 +249,7 @@ interrupts = <18>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; + usb-phy = <&usbphy0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index f0962e5..b10a3de 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -276,7 +276,7 @@ interrupts = <18>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; + usb-phy = <&usbphy0>; status = "disabled"; }; @@ -286,7 +286,7 @@ interrupts = <14>; clocks = <&clks IMX5_CLK_USBOH3_GATE>; fsl,usbmisc = <&usbmisc 1>; - fsl,usbphy = <&usbphy1>; + usb-phy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index cfc85be..d2f0087 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -789,7 +789,7 @@ reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 162>; - fsl,usbphy = <&usbphy1>; + usb-phy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>;