Re: [PATCH v2] ath10k: Increase AST table SKID length limit
SenthilKumar Jegadeesan writes: > The current SKID length configuration causes firmware > to reject peer creation for not able to allocate > AST entries for peers. This issue is observed when > least significant 3 bytes are used ramdomly to create > client MAC addresses. > > AST table SKID length configuration is increased to > maximum value to fix this issue. > > Signed-off-by: SenthilKumar Jegadeesan Thanks, applied. -- Kalle Valo -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH v2] ath10k: Increase AST table SKID length limit
This fix is specific to ath10K driver + 10.x firmware combinations. This has been tested extensively, didn't observe the mentioned issue. Thanks, Senthil J -Original Message- From: Ben Greear [mailto:gree...@candelatech.com] Sent: Thursday, February 19, 2015 1:53 AM To: Salakava Jegadeesan, Senthil Cc: ath...@lists.infradead.org; linux-wireless@vger.kernel.org Subject: Re: [PATCH v2] ath10k: Increase AST table SKID length limit Have you tried testing this with 30+ stations associated and streaming data, and with other traffic on nearby channels (say, channel 1 and 6)? We see bad performance drop-off when we set number-of-peers above 100 (with CT firmware). My kernel will set AST skid limit to number-of-peers + number-of-vdevs. Performance is best at 32 peers or less (so skid is about 40). I am wondering if the root cause is firmware/hardware walking the full skid-length for pkts from un-associated peers on same (or neighbouring) channels, or maybe unlucky hash distribution in existing peers? Thanks, Ben On 02/13/2015 07:36 AM, SenthilKumar Jegadeesan wrote: > The current SKID length configuration causes firmware to reject peer > creation for not able to allocate AST entries for peers. This issue is > observed when least significant 3 bytes are used ramdomly to create > client MAC addresses. > > AST table SKID length configuration is increased to maximum value to > fix this issue. > > Signed-off-by: SenthilKumar Jegadeesan > --- > drivers/net/wireless/ath/ath10k/hw.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/ath/ath10k/hw.h > b/drivers/net/wireless/ath/ath10k/hw.h > index 460771f..7f04645 100644 > --- a/drivers/net/wireless/ath/ath10k/hw.h > +++ b/drivers/net/wireless/ath/ath10k/hw.h > @@ -223,7 +223,7 @@ struct ath10k_pktlog_hdr { > #define TARGET_10X_NUM_WDS_ENTRIES 32 > #define TARGET_10X_DMA_BURST_SIZE0 > #define TARGET_10X_MAC_AGGR_DELIM0 > -#define TARGET_10X_AST_SKID_LIMIT16 > +#define TARGET_10X_AST_SKID_LIMIT128 > #define TARGET_10X_NUM_STATIONS 128 > #define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \ >(TARGET_10X_NUM_VDEVS)) > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe > linux-wireless" in the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v2] ath10k: Increase AST table SKID length limit
Have you tried testing this with 30+ stations associated and streaming data, and with other traffic on nearby channels (say, channel 1 and 6)? We see bad performance drop-off when we set number-of-peers above 100 (with CT firmware). My kernel will set AST skid limit to number-of-peers + number-of-vdevs. Performance is best at 32 peers or less (so skid is about 40). I am wondering if the root cause is firmware/hardware walking the full skid-length for pkts from un-associated peers on same (or neighbouring) channels, or maybe unlucky hash distribution in existing peers? Thanks, Ben On 02/13/2015 07:36 AM, SenthilKumar Jegadeesan wrote: > The current SKID length configuration causes firmware > to reject peer creation for not able to allocate > AST entries for peers. This issue is observed when > least significant 3 bytes are used ramdomly to create > client MAC addresses. > > AST table SKID length configuration is increased to > maximum value to fix this issue. > > Signed-off-by: SenthilKumar Jegadeesan > --- > drivers/net/wireless/ath/ath10k/hw.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/wireless/ath/ath10k/hw.h > b/drivers/net/wireless/ath/ath10k/hw.h > index 460771f..7f04645 100644 > --- a/drivers/net/wireless/ath/ath10k/hw.h > +++ b/drivers/net/wireless/ath/ath10k/hw.h > @@ -223,7 +223,7 @@ struct ath10k_pktlog_hdr { > #define TARGET_10X_NUM_WDS_ENTRIES 32 > #define TARGET_10X_DMA_BURST_SIZE0 > #define TARGET_10X_MAC_AGGR_DELIM0 > -#define TARGET_10X_AST_SKID_LIMIT16 > +#define TARGET_10X_AST_SKID_LIMIT128 > #define TARGET_10X_NUM_STATIONS 128 > #define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \ >(TARGET_10X_NUM_VDEVS)) > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- Ben Greear Candela Technologies Inc http://www.candelatech.com -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH v2] ath10k: Increase AST table SKID length limit
The current SKID length configuration causes firmware to reject peer creation for not able to allocate AST entries for peers. This issue is observed when least significant 3 bytes are used ramdomly to create client MAC addresses. AST table SKID length configuration is increased to maximum value to fix this issue. Signed-off-by: SenthilKumar Jegadeesan --- drivers/net/wireless/ath/ath10k/hw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 460771f..7f04645 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -223,7 +223,7 @@ struct ath10k_pktlog_hdr { #define TARGET_10X_NUM_WDS_ENTRIES 32 #define TARGET_10X_DMA_BURST_SIZE 0 #define TARGET_10X_MAC_AGGR_DELIM 0 -#define TARGET_10X_AST_SKID_LIMIT 16 +#define TARGET_10X_AST_SKID_LIMIT 128 #define TARGET_10X_NUM_STATIONS128 #define TARGET_10X_NUM_PEERS ((TARGET_10X_NUM_STATIONS) + \ (TARGET_10X_NUM_VDEVS)) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html