Hi Stefan,
I'm having trouble with my Ethernet device on a TQM5200 based board with
LXT971 Phy. I'm running U-Boot 2009.03 and a Kernel 2.6.30.
When doing a ping under U-Boot before booting into Linux, Ethernet works
fine in Linux also. Dmesg reads:
[ 262.369444] net eth0: Using PHY at MDIO address 0
[ 263.265903] net eth0: attached phy 0 to driver LXT971
But if I start Linux without prior use of the fec under U-Boot, Ethernet
is not working in Linux. The wrong drivers seems to be attached to the
phy. Dmesg reads:
[2.068285] net eth0: Using PHY at MDIO address 0
[2.964774] net eth0: attached phy 0 to driver Generic PHY
^^^
Is there a bootarg to tell linux which driver to use? Any ideas what I'm
doing wrong?
I cannot reproduce this problem with a tqm5200/stk52xx combination.
Linux always happily uses a genric PHY, irrelevant if I use networking
in U-Boot.
Cheers
Detlev
--
DENX Software Engineering GmbH, MD: Wolfgang Denk Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: d...@denx.de
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev