Re: USB drive problem
hmm, on Thu, Nov 01, 2007 at 01:23:15PM +1100, Craig Findlay said that > umass0: BBB bulk-in stall clear failed, IOERROR definitely try another USB cable too. a flakey cable produces a lot of different errors. i was bitten by this in the past. -f -- show me a sane man and i will cure him for you. -- c. jung
Re: USB drive problem
> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Craig Findlay > Sent: Thursday, 1 November 2007 12:53 PM > To: misc@openbsd.org > Subject: USB drive problem > > I am having trouble using a Maxtor OneTouch external drive (an older > model 250GB drive) on a 4.1 Ipex Celeron box. I suspect that the drive > itself is the problem but I wanted to get some other opinion. > > The most recent error resulted in the following output: The first part > is when I plugged the drive in, the second when the error > occurred while > running an rdiff-backup process using the drive as the destination. > > umass0 at uhub6 port 4 configuration 1 interface 0 > umass0: Maxtor OneTouch, rev 2.00/2.00, addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets > sd0 at scsibus1 targ 1 lun 0: SCSI0 > 0/direct fixed > sd0: 239371MB, 239371 cyl, 64 head, 32 sec, 512 bytes/sec, > 490232832 sec > total > > umass0: Invalid CSW: sig 0xd0d0ea80 should be 0x53425355 > umass0: Invalid CSW: sig 0xd0d0ea80 should be 0x53425355 > umass0: at uhub6 port 4 (addr 2) disconnected > umass0: BBB bulk-in stall clear failed, IOERROR I've not seen the "Invalid CSW" bit but I've found that the error "bulk-in stall clear failed" can be related to the power supply to the disk. I've seen that error with external USB laptop drives powered from the USB cable without a separate external power source. ciao dave --- Dave Edwards
USB drive problem
I am having trouble using a Maxtor OneTouch external drive (an older model 250GB drive) on a 4.1 Ipex Celeron box. I suspect that the drive itself is the problem but I wanted to get some other opinion. The most recent error resulted in the following output: The first part is when I plugged the drive in, the second when the error occurred while running an rdiff-backup process using the drive as the destination. umass0 at uhub6 port 4 configuration 1 interface 0 umass0: Maxtor OneTouch, rev 2.00/2.00, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus1 targ 1 lun 0: SCSI0 0/direct fixed sd0: 239371MB, 239371 cyl, 64 head, 32 sec, 512 bytes/sec, 490232832 sec total umass0: Invalid CSW: sig 0xd0d0ea80 should be 0x53425355 umass0: Invalid CSW: sig 0xd0d0ea80 should be 0x53425355 umass0: at uhub6 port 4 (addr 2) disconnected umass0: BBB bulk-in stall clear failed, IOERROR Any help is appreciated. Mostly when this happens the drive ends up uncleanly mounted and fsck is needed to fix various disk errors. The current USB controller is a VIA VT83C572 on a PCI card, but I also had similar problems with an Intel 82801DB controller that is on the MB. Cheers, Craig