Hi Aleksander,
Thank you for all the explanations. I wasn't aware the initial EPS bearer
needs to be configured separately. Your guesses about the empty APN were
right, I can see:
# qmicli -d /dev/cdc-wdm0 -p --wds-get-lte-attach-pdn-list
Attach PDN list retrieved:
Current list: '1'
Pending list: n/a
# qmicli -d /dev/cdc-wdm0 -p --wds-get-profile-list=3gpp
Profile list retrieved:
[1] 3gpp -
APN: ''
PDP type: 'ipv4-or-ipv6'
PDP context number: '1'
Username: ''
Password: ''
Auth: 'none'
No roaming: 'no'
APN disabled: 'no'
Setting the initial EPS bearer works, I'm going to observe how it impacts
our connectivity, thank you!
# mmcli -m 0
--3gpp-set-initial-eps-bearer-settings="apn=de1.super,ip-type=ipv4"
Successfully set initial EPS bearer properties
# mmcli -m a -K | grep "modem.3gpp.eps.initial-bearer.settings"
modem.3gpp.eps.initial-bearer.settings.apn : de1.super
modem.3gpp.eps.initial-bearer.settings.ip-type : ipv4
modem.3gpp.eps.initial-bearer.settings.user : --
modem.3gpp.eps.initial-bearer.settings.password : --
Kind regards,
Filip
On Tue, Apr 9, 2024 at 11:02 AM Aleksander Morgado <
aleksande...@chromium.org> wrote:
> Hey!
>
> >
> > First of all I wanted to say thanks for developing and supporting a
> great piece of software.
> >
>
> Thanks to you for using it!
>
> > We have a few thousand devices running ModemManager 1.18.6 and Quectel
> EC21 modem. Our service provider Twilio/Kore keeps reporting that on some
> devices we have 2 simultaneous data sessions with different APNs: "super"
> and "de1.super".
> >
> > We use ModemManager's API to find the modem, enable it, then wait for
> auto-register done by the modem FW, and finally create a bearer with
> "de1.super" APN and connect. Operations are run over QMI protocol.
> >
>
> Ok, so if I'm reading this right, you do NOT explicitly configure the
> attach APN settings, you only provide the data APN settings. The
> attach APN settings are provided by the modem itself.
>
> > We have autoselect disabled, so I'd expect to always use European APN
> "de1.super", instead of US "super" which is the default.
> > mmcli -m 0 --command='AT+QMBNCFG="AutoSel"' response: '+QMBNCFG:
> "AutoSel",0
>
> I don't know what AutoSel does in these modems, can you elaborate?
>
> > We have made an experiment to show PDP contexts on the devices with
> AT+CGDCONT?, and noticed an interesting thing:
> > On most of them, it only shows 1 PDP context:
> > PdpContext { ctx_id: 1, pdp_type: IpV4V6, pdp_addr:
> \"0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0\", apn: \"\", data_comp: Off, head_comp:
> Off, ipv4_addr_alloc: NasSignaling, request_type:
> ContextEstablishmentOrNon3GppAccessNetworkHandover }
> >
> > However, on 1 of the 200 devices, we see 2 PDP contexts:
> > PdpContext { ctx_id: 2, pdp_type: Ip, pdp_addr: \"0.0.0.0\", apn:
> \"de1.super\", data_comp: Off, head_comp: Off, ipv4_addr_alloc:
> NasSignaling, request_type:
> ContextEstablishmentOrNon3GppAccessNetworkHandover }
> >
> > PdpContext { ctx_id: 1, pdp_type: IpV4V6, pdp_addr:
> \"0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0\", apn: \"\", data_comp: Off, head_comp:
> Off, ipv4_addr_alloc: NasSignaling, request_type:
> ContextEstablishmentOrNon3GppAccessNetworkHandover }
> >
> > However, even on device with just 1 PDP context received from AT command
> > # mmcli -m 0 --command='AT+CGDCONT?'
> > response: '+CGDCONT:
> 1,"IPV4V6","","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0'
> >
> > AT commands are run ~10 minutes after modem setup and connection is done
> with ModemManager.
> > ModemManager always reports 2 bearers, I understand the 1st bearer is
> LTE default EPS bearer, while the 2nd one is the actual data session bearer:
> >
>
> Yes.
>
> > # mmcli -b 0
> > -
> > General|path: /org/freedesktop/ModemManager1/Bearer/0
> > |type: default-attach
> > -
> > Status | connected: yes
> > | suspended: no
> > | multiplexed: no
> > | ip timeout: 20
> > -
> > Properties | apn: super
> > | ip type: ipv4
> >
> > # mmcli -b 3
> >
> > General| path:
> /org/freedesktop/ModemManager1/Bearer/3
> > | type: default
> >
> > Status | connected: yes
> > | suspended: no
> > |multiplexed: no
> > | interface: wwan0
> > | ip timeout: 20
> >
> > Properties |apn: de1.super
> > |roaming: allowed
> > |ip type: ipv4
> >
> > IPv4 configuration | method: static
> > |address: 100.79.145.117
> > | prefix: 30
>
