[mythtv-users] uc: Strange DVB Kernel Signal loss
Hi I have been running FC3 quite stabily for a long time, this weekend I decide it wont be hard to start again and use FC4 this time instead. Oh how wrong am i! I have FC4 all up and running to the stage that FC3 once was. However I have noticed this strangeness: In FC3 I was using kernel 2.6.11.x, my dvb card in myth would do a full scan with no multiplex prior listed and pick up all channels In FC4 using kernel 2.6.14, my dvb card wont do a full scan, it fails tuning, if I add multiplexs manually and scan those (ie ones from FC3 db) then it will pick up most channels but fails to tune 2 multiplexs. In FC4 if I boot using kernel 2.6.11, I can now tune these 2 multiplexs as well. Eh? Is it me or is there a weird issue in the newer kernels relating to DVB. I tried kernel 2.6.15 (from fc4 testing) and I also tried compiling CVS DVB/V4L modules against 2.6.14. none of this worked either. How come I am loosing signal by changing kernels? Now I would just revert back to using 2.6.11, but support packages for this kernel are long gone, ie nvidia-kmdl and I don't want to use the nvidia installer. Does anyone have any ideas? BTW my system is: 2600+ sempron XCube ½ gig ram Nova-T SAA7xxx Thanks Tom The Information contained in this E-Mail and any subsequent correspondenceis private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution,or any action taken or omitted to be taken in reliance on such informationis prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored.Calls to QinetiQ may be recorded for quality control,regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] UC: Recording fine but watching live tv dies
Does anyone have any idea why when I watch live tv it wont tune and my frontend dies, but when I tell it to record the same program and I watch the recording all works fine? It never used to be like this? Thanx Tom Barker Airspace Defence Control QinetiQ Bldg AT Rm 107 Malvern Technology Centre St. Andrews Road, Malvern Worcestershire, WR14 3PS Tel: 01684 895463 Email: [EMAIL PROTECTED] Web: www.QinetiQ.com QinetiQ - The Global Defence and Security Experts. The Information contained in this E-Mail and any subsequent correspondenceis private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution,or any action taken or omitted to be taken in reliance on such informationis prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored.Calls to QinetiQ may be recorded for quality control,regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] FC3-FC4 using apt
I know this is off topic but: Is it possible to upgrade my FC3-FC4 without a reinstall. Can I just change sources.list to point to fc4 packages over fc3? I am using a couple of non standard repositories, axels and ayo I think? I had a quick look last night but did not come to any conclusions Any suggestions welcome. Thanx Tom The Information contained in this E-Mail and any subsequent correspondenceis private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution,or any action taken or omitted to be taken in reliance on such informationis prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored.Calls to QinetiQ may be recorded for quality control,regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Perplexing one - On screens with lots of bl ack playback judder s
I did have use video as timebase, and assumed that to be my problem , so I unchecked it. But I still get the problem. As far as I am aware though, I tried playing the same file on a remote frontend connected to the juddery machine (backend) and did not get the same problem.. I will have to verify that though. It really is a strange one.. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Williams Sent: 06 July 2005 10:26 To: Discussion about mythtv Subject: Re: [mythtv-users] Perplexing one - On screens with lots of black playback judder s On 7/6/05, Barker Thomas [EMAIL PROTECTED] wrote: This is a weird one, I admit it. I have no idea what it could be. Any suggestions much welcomed. Ok, When I am watching TV be it live or recorded and the scene changes to a mostly black scene, the video and audio judder. It is only a blackish scene which does this.. Normally during advert breaks; My system: Latest svn, (used to do it on 0.18 too) Latest nvidia drivers, complete removal and reinstall just to make sure (nforce 2, ie mx4) FC3 Sempron 2600 Nova-T uk dvb Spdif reroute of all sound to an optical decoder AC3 passthrough is not checked nor is sync with audio I'm glad it's not just me, yes I see this too. This is also with UK DVB (TS mode), in fact i've only seen it for one program (Nip Tuck) but it does for every episode at all 'fades to black' for advert breaks plus other dark scenes. One thing I haven't checked that may be of interest is whether mplayer displays this behaviour or not. Thomas, just out of interest, do you have 'use video as timebase' checked or not? This setting could be related and is probably worth testing. I can probably supply a short mpeg file that demonstrates this behaviour if required. Steve ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: Singal monitoring - How?
How can I singal monitor my DVB-T uk signal while trying out different aerial configurations? There must be a program for this? Thanx Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Mythrip won't nor wi ll it look up
Change the ~/.cdserverrc to use CDDB protocol on port 8880 Took me ages to realise this, maybe this be be the standard mythmusic writes out to prevent these messages -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Greg Cope Sent: 11 May 2005 18:37 To: Discussion about mythtv Subject: [mythtv-users] Mythrip won't nor will it look up Hi All, grip seems to work fine (both lookups and rip/encoding) Yet myth either fails to lookup an comes up with unknown artist or just exits and ejects the cd - going back to the Import CD page. Any ideas? .18 using atrpms on FC3 Greg ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Myth music and cddb
I solved it :D I just changed my .cdserverrc to use cddb as the protocol instead of http and on port 8880 instead of 80 Works perfect now:D -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darren Black Sent: 07 May 2005 15:21 To: Discussion about mythtv Subject: Re: [mythtv-users] Myth music and cddb Do tell if you solve this... It's never worked for me either :-/ /drdaz On 5/6/05, Barker Thomas [EMAIL PROTECTED] wrote: You change the server in ~/.cddbserverrc But even when I do this I have no luck. Im going to try changing it to use cddb protocol instead of http when I get home to see if that helps. Doubt it! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Garry Cook Sent: 06 May 2005 16:03 To: Discussion about mythtv Subject: Re: [mythtv-users] Myth music and cddb On 5/5/05, Patrick @ Mythtv [EMAIL PROTECTED] wrote: check this site and change to another server: http://www.freedb.org/modules.php?name=Sectionssop=viewarticleartid=9 this worked for me. patrick Does anyone else have this problem or is it just me? When I insert a cd into mythmusic it can never retrieve the details off cddb. I have deleted ~/.cddb/ and ~/.cdserverrc (or whatever it is called). When mythtv does try and look it up, it just fills a ~./cddb/unknown/unknown in. The thing is grip or kaudiocreater can use cddb fine. I am starting to think it's a bug somewhere and might look into it? Does anyone else have these problems? Tom I'm having this issue as well. I've also deleted ~/.cddb and ~/.cdservwhatever. Where do I change the server used? I've looked for this setting in mythtv-setup and in the music tools setup, can't seem to find it... Garry ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] transcode settings bug?
Hi I have setup mythtv many times before and had transcode working nicely. However this time I set it all all and when I transcode I get fairly big files. I am using 0.18 release. I have changed the low and high quality settings in h/w encoders (I have a nova-t dvb card). I only changed the vid to default mpeg4 but changed bitrate to 2000 for high and 800 for low and audio to mp3 32000 at quality 7. But when I encode a file for example The bill, normal size 1.64G, before transcoding After transcoding 1.4G in low? That's not much of a change! Am I doing something wrong or is this a bug ? I have AC3 passthrough set if it makes any odds. Any suggestions? The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Myth music and cddb
Hi I tried changing the server to many different servers and deleting the local cddb cache, and I must say its useless! It still doesn't work. Not a clue why not either. My only suggestion is to get in there and debug output it to see whats going wrong. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Barker Thomas Sent: 05 May 2005 10:30 To: 'Discussion about mythtv' Subject: RE: [mythtv-users] Myth music and cddb Thanx, I am quite sure I tried the uk server and then the random one, it did occasionally work. Will retry this dinner time. Thanx From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick @ Mythtv Sent: 05 May 2005 10:18 To: 'Discussion about mythtv' Subject: RE: [mythtv-users] Myth music and cddb check this site and change to another server: http://www.freedb.org/modules.php?name=Sectionssop=viewarticleartid=9 this worked for me. patrick Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Barker Thomas Verzonden: donderdag 5 mei 2005 10:59 Aan: 'mythtv-users@mythtv.org' Onderwerp: [mythtv-users] Myth music and cddb Does anyone else have this problem or is it just me? When I insert a cd into mythmusic it can never retrieve the details off cddb. I have deleted ~/.cddb/ and ~/.cdserverrc (or whatever it is called). When mythtv does try and look it up, it just fills a ~./cddb/unknown/unknown in. The thing is grip or kaudiocreater can use cddb fine. I am starting to think it's a bug somewhere and might look into it? Does anyone else have these problems? Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] MythMusic
I am in the same situation, it doesn't seem to look up cds for me. However the reason its not in your logs is you have a local cddb cache under ~/.cddb , delete this and retry it. From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Curtis Sent: 06 May 2005 09:51 To: mythtv-users@mythtv.org Subject: [mythtv-users] MythMusic Resent as no response to previous post Hi folks I have been workingon my Mythtv system for some weeks and have made some mistakes but also a great deal of progress But I am stumped on Mythmusic!! I think I know how it should work but I would like confirmation CD open tray and insert CD Select Import CD from menu (tray will accept CD) Few seconds and menu will give way to options such as quality, CD title, performer and genre First question, should the above be automatically entered? Lower down on that screen there is the track information or rather in my case lack of, what I have is the correct number of tracks and what would seem the play length Next question; with the information for freedb entered in .cdserverrc as http://uk.freedb.org etc as gleaned from the freedbwebsite should all this information be entered automatically? I can rip the CD but it will not have any track info This system is behind aFirewall but there is no attempt to go out to the freedb website according to the Firewall logs First time I have felt the need to ask for advice from this forum folks!!! Mike Curtis The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] cddb mythmusic
Hi does anyone have auto cddb mythmusic working? Whenever and whatever I try I just get blank entries. This has been the case with 2 FC3 machines and a gentoo machine The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Myth music and cddb
You change the server in ~/.cddbserverrc But even when I do this I have no luck. Im going to try changing it to use cddb protocol instead of http when I get home to see if that helps. Doubt it! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Garry Cook Sent: 06 May 2005 16:03 To: Discussion about mythtv Subject: Re: [mythtv-users] Myth music and cddb On 5/5/05, Patrick @ Mythtv [EMAIL PROTECTED] wrote: check this site and change to another server: http://www.freedb.org/modules.php?name=Sectionssop=viewarticleartid=9 this worked for me. patrick Does anyone else have this problem or is it just me? When I insert a cd into mythmusic it can never retrieve the details off cddb. I have deleted ~/.cddb/ and ~/.cdserverrc (or whatever it is called). When mythtv does try and look it up, it just fills a ~./cddb/unknown/unknown in. The thing is grip or kaudiocreater can use cddb fine. I am starting to think it's a bug somewhere and might look into it? Does anyone else have these problems? Tom I'm having this issue as well. I've also deleted ~/.cddb and ~/.cdservwhatever. Where do I change the server used? I've looked for this setting in mythtv-setup and in the music tools setup, can't seem to find it... Garry ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Myth music and cddb
Does anyone else have this problem or is it just me? When I insert a cd into mythmusic it can never retrieve the details off cddb. I have deleted ~/.cddb/ and ~/.cdserverrc (or whatever it is called). When mythtv does try and look it up, it just fills a ~./cddb/unknown/unknown in. The thing is grip or kaudiocreater can use cddb fine. I am starting to think it's a bug somewhere and might look into it? Does anyone else have these problems? Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Myth music and cddb
Thanx, I am quite sure I tried the uk server and then the random one, it did occasionally work. Will retry this dinner time. Thanx From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick @ Mythtv Sent: 05 May 2005 10:18 To: 'Discussion about mythtv' Subject: RE: [mythtv-users] Myth music and cddb check this site and change to another server: http://www.freedb.org/modules.php?name=Sectionssop=viewarticleartid=9 this worked for me. patrick Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Barker Thomas Verzonden: donderdag 5 mei 2005 10:59 Aan: 'mythtv-users@mythtv.org' Onderwerp: [mythtv-users] Myth music and cddb Does anyone else have this problem or is it just me? When I insert a cd into mythmusic it can never retrieve the details off cddb. I have deleted ~/.cddb/ and ~/.cdserverrc (or whatever it is called). When mythtv does try and look it up, it just fills a ~./cddb/unknown/unknown in. The thing is grip or kaudiocreater can use cddb fine. I am starting to think it's a bug somewhere and might look into it? Does anyone else have these problems? Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Mythmusic spdif
I have finally got all my audio coming out of my spdif port. http://www.mythtv.info/moin.cgi/DigitalSoundHowTo Using the long .asoundrc from here for my nforce2 and uncommenting the line about passing everything to digital And passing these options to alsa options snd-pcm-oss adsp_map=2 dsp_map=2 I can set mythtv audio to use ALSA:dmix-digital and mythmusic works also. Brilliant. Thanx people for your help. Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Ditched the Epia and bought a Aopen XCu be with Nforce 2 chipset - best move ever!
I was running a frontend and backend on an EPIA m10k for the last 8 months or so. It was ok, a little slow and always a pain to compile, transcode, get the h/w mpeg2 decoder working. I finally gave in the other day and decided to move for an easier faster life. I shall be ebaying my old epia very soon I think. For £150 I got a nforce 2 aopen xcube, dvd 16x dual layer writer and a sempron 2600, I used my old hard drive (120gb) and old mem (512). 200W power supply also so still no worries with leaving it on 24/7. The cube itself has onboard audio and geforce mx 4 etc.. After installing FC3 from scratch and and setting up ATRPMS and getting mythtv-suite. A few configurations and a mysql source all is back to normal. And so much faster and smoother than ever before. I did try using XVMC acceleration for displaying live tv, but disliked the fact things were in B/W and also it seemed very sketching, kinda streaking with white lines, so I turned that off. CPU usage without XvMc is laughable anyhow so makes no odds. I must say im impressed with the dvd rip facility, wish you could specify lower bit rates though. One thing I wish we could sort out, is burning files to dvd. I see mythburn and nuv2burn (or some similar name) made a good start, but haven't got too far yet. Would be nice to see. Many thanx Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] MythMusic spdif
Is it me? Or does mythmusic only work on oss? I use alsa:spdif for mythtv, so when I use mythmusic I have to switch to my analog output before I can hear audio! Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
uc: RE: [mythtv-users] uc: epia spdif AC3 - Almost there, quick q uestion
That's a very good point, I assumed UK DVB-T had AC3 encoded channels? Does anyone know this? I have had no luck getting AC3 output from DVB-T. However normal DVB-T audio does sound much better over digital, just cos! As for getting AC3 working with mplayer it was just a matter of having alsa for my snd card and doing mplayer -ac hwac3, Ie try to use hardware ac3 passthrough and if not there use normal ie the , . Tom -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nick Sent: 20 April 2005 18:44 To: Discussion about mythtv Subject: Re: [mythtv-users] uc: epia spdif AC3 - Almost there, quick question On 4/19/05, Barker Thomas [EMAIL PROTECTED] wrote: Hi I have mythtv 0.18 compiled with alsa, I have alsa correctly using spdif. I have a dvb-t setup in the uk, nova-t so should be fine for AC3 encoded channels. Thomas, Which UK DVB channels are AC3 encoded currently? Whenever I've demuxed recordings to burn to DVD, they've always come out as MP2 streams. Having a Pundit-R system, one of the last things I have left to configure is to run the sound through the SPDIF so I'd be interested in your responses. As I'll also be restoring the DVD drive into the system this week (after trying to hunts down mediamonitor oddness) which obviously will give AC3 output from DVDs, I'll be hoping to get everything eventually working over the SPDIF which may involve cutting a hole in to front door of the Pundit-R (great design having the SPDIF output not only on the front of the system, but also behind a door?!?). Cheers, Nick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: mythfrontend running mythfilldatabase
Is it me or does 0.18 and 0.17 not run mythfrilldatabase automatically anymore even when told to? My log file says it has not even been tried to run when I set it to. I have specified the exact location and it has permissions as when I run it from the frontend user terminal it runs and fills fine. Any ideas? Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: spdif anyone?
Does anyone use spdif digital audio with AC3 over DVB or am I flogging a dead horse? Hi I have mythtv 0.18 compiled with alsa, I have alsa correctly using spdif. I have a dvb-t setup in the uk, nova-t so should be fine for AC3 encoded channels. For example mplayer ac3test.avi -ac hwac3 -vo null switches my external amp to DD and all sounds great. I have enabled my mythtv audio setup to pass AC3 through and have set the device to ALSA:iec958 and I get sound through my amp now over coaxial, But my amp does not switch to DD. Now my question, is ALSA:iec958 the correct device for a via epia m10k? if so how do I make mythtv output AC3 channels to my amp? Am I Missing something here? Please help!! P.s. I have checked the forums and this is as far as I can go information wise! Many thanx Thomas Barker The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
uc:RE: [mythtv-users] Request info from working M10K frontend.
What do these drivers provide? Do they provide mpeg2 decoding on chip? Or is it just 3d acceleration? Does it replace the need for viaxvmc? Tom -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ivor Hewitt Sent: 20 April 2005 15:00 To: Discussion about mythtv Subject: Re: [mythtv-users] Request info from working M10K frontend. On 4/20/05, BARKER, Paul [EMAIL PROTECTED] wrote: BTW - has anyone gotten the new VIA open source Unichrome driver to work with recent releases ? Works fine for me. :) I had a very quick look but the docs in the distribution seemed a bit poor and I haven't looked at them in depth. Which docs in particular? Perhaps either pointing out which bits are bad and need improving or making the improvements would help? Regards, -- Ivor http://www.ivor.it ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
uc:RE: [mythtv-users] Request info from working M10K frontend.
Hehe I thought as much. Didn't realise there was a new open source unichrome release (non via) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ivor Hewitt Sent: 20 April 2005 15:10 To: Discussion about mythtv Subject: Re: [mythtv-users] Request info from working M10K frontend. BTW - has anyone gotten the new VIA open source Unichrome driver to work with recent releases ? Oops, I've just realised you mean VIA's new open source Unichrome driver release as opposed to the new Unichrome open source driver release. Doh. Must pay attention, must pay attention. This is going to get confusing, VIA Open Source Unichrome driver vs Open Source Unichrome VIA driver Ho hum. Anyway, in summary, no there's no point trying to use the VIA driver with myth since the VIA driver only provides their proprietary ddmpeg API. -- Ivor http://www.ivor.it ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: epia spdif AC3 - Almost there, quick question
Hi I have mythtv 0.18 compiled with alsa, I have alsa correctly using spdif. I have a dvb-t setup in the uk, nova-t so should be fine for AC3 encoded channels. For example mplayer ac3test.avi -ac hwac3 -vo null switches my external amp to DD and all sounds great. I have enabled my mythtv audio setup to pass AC3 through and have set the device to ALSA:iec958 and I get sound through my amp now over coaxial, But my amp does not switch to DD. Now my question, is ALSA:iec958 the correct device for a via epia m10k? if so how do I make mythtv output AC3 channels to my amp? Am I Missing something here? Please help!! P.s. I have checked the forums and this is as far as I can go information wise! Many thanx Thomas Barker The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: CVS oddness
Hi after checking out cvs (last night) and ./configuring it with xvmc-vld enabled, native lirc disabled, ivtv disabled, dvb enabled(linuxtv-1.1.1 dir) I get the following errors on build: d mythepg make -f Makefile make[2]: Entering directory `/root/mythtv/mythtv/programs/mythepg' qmake -o Makefile mythepg.pro make[2]: Leaving directory `/root/mythtv/mythtv/programs/mythepg' make[2]: Entering directory `/root/mythtv/mythtv/programs/mythepg' g++ -o mythepg main.o -L/usr/lib/qt-3.3/lib -L../../libs/libmyth -L../../libs/libmythtv -L../../libs/libavcodec -L../../libs/libavformat -lmythtv-0.17 -lmythavformat-0.17 -lmythavcodec-0.17 -lmyth-0.17 -lfreetype -lmp3lame -L/usr/X11R6/lib -lXinerama -lXv -lXxf86vm -lviaXvMC -lXvMC -lqt-mt -lXext -lX11 -lm -lpthread ../../libs/libmyth/libmyth-0.17.so: undefined reference to `LircEventLock::~LircEventLock()' ../../libs/libmyth/libmyth-0.17.so: undefined reference to `LircEventLock::LircEventLock(bool)' collect2: ld returned 1 exit status make[2]: *** [mythepg] Error 1 make[2]: Leaving directory `/root/mythtv/mythtv/programs/mythepg' make[1]: *** [sub-mythepg] Error 2 make[1]: Leaving directory `/root/mythtv/mythtv/programs' make: *** [sub-programs] Error 2 [EMAIL PROTECTED] mythtv]# Any ideas? Im certainly confused. I am right in thinking I can disable lirc (--disable-lirc) as I used to do this and have lirc installed on my machine with a daemon running Thanx Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: Keyboard and lirc woes - funny problem
Hi does anyone know why this is: When I click enter on the keyboard or ok on the remote control on a mythtv frontend button the button just depresses and stays depressed, ie does not click to progress. Now this used to work, the only thing I have probably changed is the distribution packages, ie FC3 apt-get update and upgrade, I am using the default apt sources list. Any ideas? This one is bugging me? I am thinking its either lirc or xorg, which have both been upgraded since it used to work. Thanx Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: FC3 And latest CVS Problem
Hi I apt upgraded my FC3, my FC3 uses the standard apt stable packages as specified on Jarod Wilsons page. When I upgraded my FC3 I got a new Xorg, however whenever I try to compile mythtv CVS I get an error saying it cannot find "-LXext" supposedly linking the X extensions, but I thought this package was part of the core implementation of Xorg? Anyone got any ideas? Confused, Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s).For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Callsto QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] uc: Epia Unichrome viaXvMC Unichrome, does anyone have it stable? please read if u use it
I am using CVS mythtv with viaXvMC support compiled in, Latest cvs version of DRI module via.ko, Latest cvs version of via_drv.o Latest cvs version of libviaXvMC.* And to be fair, my backend is stable enough, but the frontend is just not stable. More so recently, but has always been so. I seemed to have best results before viaXVMC was even introduced and it was libdd(I think? Was ages ago!). I am going to try older cvs versions later tonight and test them, but I would love some feedback from other users. Whats your setup and how well does it work? (ie driver versions or cvs dates, mythtv versions, board) - unichrome only please. Many thanx, Tom The Information contained in this E-Mail and any subsequent correspondence is private and is intended solely for the intended recipient(s). For those other than the recipient any disclosure, copying, distribution, or any action taken or omitted to be taken in reliance on such information is prohibited and may be unlawful. Emails and other electronic communication with QinetiQ may be monitored. Calls to QinetiQ may be recorded for quality control, regulatory and monitoring purposes. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
