Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-14 Thread Claude Boucher
I thought the problem was fixed, but it is not. Next possible culprit... 
ivtv? as someone suggested here?
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-14 Thread Claude Boucher
Chad wrote :
It seems that checking the "Independent muting of L/R channels" button 
in the frontend configuration (it's located at the bottom of the page 
you set the other audio parameters such as the master volume, etc.) 
worked in my case! I tuned the station causing me problems three times 
and I got sound every time.

Chad, you're my hero! :-)

 

I don't know if it is relevant, but the channel (TV5) primarly airs
programs from France which are transcoded to NTSC before they are
broadcast on my Canadian cable system.
   


After playing with audio for a few days, I noticed a setting that may
help you in this case.  I believe it's in the setup interface under
the device section.  Go to your PVR (/dev/videoX), and check the box
for independent muting of L/R channels.
Just a shot in the dark, but I remember reading that this option was
for situations similar to your description.
Good Luck!
 

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-14 Thread Chad

> I don't know if it is relevant, but the channel (TV5) primarly airs
> programs from France which are transcoded to NTSC before they are
> broadcast on my Canadian cable system.


After playing with audio for a few days, I noticed a setting that may
help you in this case.  I believe it's in the setup interface under
the device section.  Go to your PVR (/dev/videoX), and check the box
for independent muting of L/R channels.

Just a shot in the dark, but I remember reading that this option was
for situations similar to your description.

Good Luck!
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-13 Thread Bruce Markey
Claude Boucher wrote:
Thanks for the advice, but the problem seems to be elsewhere.
I followed your advice and pulled a Sound Blaster Live from one of my 
other computers. I disabled the on-board audio and installed the SB in 
my Myth box (including editing the /etc/modprobe.conf for a 'emu10k1') 
but no luck.

I still get the same intermittent problem with some channels some of the 
time. It happens most of the time with channel 15, but I also got a 
video-only recording last night on channel 21 (a CBS affiliate).
Have you screwed the coax stright into the TV to see if the station
is broadcasting both audio channels? My CBS affiliate screwed up
during the NCAA tournamant. I had left and rear surround only for
about a week. This is more likely than an intermittent audio
driver problem associated with the channel of the tuner card.
--  bjm
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-13 Thread Claude Boucher
Both sound cards are fine. I get correct sound from all MP3s, DVDs, CDs. 
Live and recorded television is usually fine, except for the problem I 
mentioned earlier.  And the bad recording from last night doesn't play 
on my windows box or on a bootable KnoppMyth front end (v. 5A12) on a 
second computer.

I will check out the newer versions of ivtv. As you guessed correctly, I 
use an "older" (0.32q, which I picked up at ATrpms.net) version of the 
driver.

Claude
Craig Partin wrote :
If the sound card is playing two channel audio then it probably isn't
an alsa issue.  Try a few different ivtv driver versions and see if it
changes, or at least play the recordings on different hardware to rule
out a cature problem.
 

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-13 Thread Craig Partin
On 4/13/05, Claude Boucher <[EMAIL PROTECTED]> wrote:
> Thanks for the advice, but the problem seems to be elsewhere.
> 
> I followed your advice and pulled a Sound Blaster Live from one of my
> other computers. I disabled the on-board audio and installed the SB in
> my Myth box (including editing the /etc/modprobe.conf for a 'emu10k1')
> but no luck.
> 
> I still get the same intermittent problem with some channels some of the
> time. It happens most of the time with channel 15, but I also got a
> video-only recording last night on channel 21 (a CBS affiliate).
> 
> We'll see what happens with 0.18...
> 
> Claude
> 
> Graham Dunn wrote :
> 
> >On Mon, Apr 11, 2005 at 10:48:19AM -0400, Claude Boucher wrote:
> >
> >
> >>I use the on-board audio of my MoBo (an Asus A7N8X-VM/400) which uses
> >>the snd-intel8x0 driver with the following configuration in
> >>/etc/modprobe.conf
> >>
> >>- CODE -
> >>[...]
> >>alias snd-card-0 snd-intel8x0
> >>[...]
> >>options snd-card-0 index=0
> >>install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 &&
> >>/usr/sbin/alsactl restore >/dev/null 2>&1 || :
> >>remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
> >>/sbin/modprobe -r --ignore-remove snd-intel8x0
> >>- CODE -
> >>
> >>
> >
> >I had the same problem with my onboard sound and snd-intel8x0 under
> >alsa. Only one channel would play back.
> >
> >
> >
> >>What should be my next troubleshooting steps ?
> >>
> >>
> >
> >My troubleshooting step consisted of purchasing an inexpensive sound
> >blaster. Problem solved.
> >
> >I really think there's something off with that driver on some onboard
> >sound cards.
> >
> >Graham
> >
> >
> >
> 
> ___
> mythtv-users mailing list
> mythtv-users@mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 

If the sound card is playing two channel audio then it probably isn't
an alsa issue.  Try a few different ivtv driver versions and see if it
changes, or at least play the recordings on different hardware to rule
out a cature problem.
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-13 Thread Claude Boucher
Thanks for the advice, but the problem seems to be elsewhere.
I followed your advice and pulled a Sound Blaster Live from one of my 
other computers. I disabled the on-board audio and installed the SB in 
my Myth box (including editing the /etc/modprobe.conf for a 'emu10k1') 
but no luck.

I still get the same intermittent problem with some channels some of the 
time. It happens most of the time with channel 15, but I also got a 
video-only recording last night on channel 21 (a CBS affiliate).

We'll see what happens with 0.18...
Claude
Graham Dunn wrote :
On Mon, Apr 11, 2005 at 10:48:19AM -0400, Claude Boucher wrote:
 

I use the on-board audio of my MoBo (an Asus A7N8X-VM/400) which uses 
the snd-intel8x0 driver with the following configuration in 
/etc/modprobe.conf

- CODE -
[...]
alias snd-card-0 snd-intel8x0
[...]
options snd-card-0 index=0
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && 
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; 
/sbin/modprobe -r --ignore-remove snd-intel8x0
- CODE -
   

I had the same problem with my onboard sound and snd-intel8x0 under
alsa. Only one channel would play back.
 

What should be my next troubleshooting steps ?
   

My troubleshooting step consisted of purchasing an inexpensive sound
blaster. Problem solved.
I really think there's something off with that driver on some onboard
sound cards.
Graham
 

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


Re: [mythtv-users] Audio - one channel doesn't play sounds

2005-04-11 Thread Graham Dunn
On Mon, Apr 11, 2005 at 10:48:19AM -0400, Claude Boucher wrote:
> 
> I use the on-board audio of my MoBo (an Asus A7N8X-VM/400) which uses 
> the snd-intel8x0 driver with the following configuration in 
> /etc/modprobe.conf
> 
> - CODE -
> [...]
> alias snd-card-0 snd-intel8x0
> [...]
> options snd-card-0 index=0
> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && 
> /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; 
> /sbin/modprobe -r --ignore-remove snd-intel8x0
> - CODE -

I had the same problem with my onboard sound and snd-intel8x0 under
alsa. Only one channel would play back.

> What should be my next troubleshooting steps ?

My troubleshooting step consisted of purchasing an inexpensive sound
blaster. Problem solved.

I really think there's something off with that driver on some onboard
sound cards.

Graham
___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


[mythtv-users] Audio - one channel doesn't play sounds

2005-04-11 Thread Claude Boucher
I have the wierdest audio problem with my fresh install of MythTV 0.17 
(FC3, latest 2.6.10 kernel, installed using Jarod's howto and updated 
with ATrpms).

My analog cable is connected to a PVR-250 through a coax cable and the 
quality is good for all 42 or so channels, except for one channel where 
I get video, but no sound at all.

It's wierd, because, I get sound on this channel on another TV connected 
directly to the coax and on my cable box. The card is probably not the 
culprit because I pulled the PVR-250 from my Myth box and I've put it in 
my Windoze box, where I get sound on this channel.

I don't know if it is relevant, but the channel (TV5) primarly airs 
programs from France which are transcoded to NTSC before they are 
broadcast on my Canadian cable system.

I use the on-board audio of my MoBo (an Asus A7N8X-VM/400) which uses 
the snd-intel8x0 driver with the following configuration in 
/etc/modprobe.conf

- CODE -
[...]
alias snd-card-0 snd-intel8x0
[...]
options snd-card-0 index=0
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && 
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; 
/sbin/modprobe -r --ignore-remove snd-intel8x0
- CODE -

What should be my next troubleshooting steps ?
Thanks in advance,
Claude
PS: I searched the list before posting and I found two threads with a 
similar problem (one in December 2004 and the other last February). but 
there were no answers.

___
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users