Re: [Nut-upsuser] PowerShield Centurion 2000

2011-03-08 Thread Arjen de Korte

Citeren James Cameron :


# upscmd myups load.on
Username (root):
Password:
#

It didn't turn on.  What's this username and password?


How should I know? (man 5 upsd.users)

Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)


___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser


Re: [Nut-upsuser] PowerShield Centurion 2000

2011-03-08 Thread James Cameron
On Tue, Mar 08, 2011 at 09:23:03AM +0100, Arjen de Korte wrote:
> Try the blazer_usb driver instead.

Thanks.  That fixed it, I think.

# upsc myups
battery.voltage: 81.72
battery.voltage.nominal: 72.0
beeper.status: enabled
device.mfr: 
device.model: HV 2K
device.type: ups
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.vendorid: 0665
driver.version: 2.4.3
driver.version.internal: 0.03
input.current.nominal: 8.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 246.1
input.voltage.fault: 246.1
input.voltage.nominal: 240
output.voltage: 0.0
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 1907
ups.load: 0
ups.mfr: 
ups.model: HV 2K
ups.productid: 5161
ups.status: OL
ups.temperature: 22.9
ups.type: online
ups.vendorid: 0665
# upscmd myups load.on
Username (root): 
Password: 
# 

It didn't turn on.  What's this username and password?

-- 
James Cameron
http://quozl.linux.org.au/
   0.00 debug level is '3'
   0.041776 Checking device (1D6B/0001) (002/001)
   0.041991 - VendorID: 1d6b
   0.042031 - ProductID: 0001
   0.042054 - Manufacturer: Linux 2.6.35-27-generic uhci_hcd
   0.042074 - Product: UHCI Host Controller
   0.042095 - Serial Number: :00:1f.4
   0.042115 - Bus: 002
   0.042135 Trying to match device
   0.042194 Device does not match - skipping
   0.042246 Checking device (0665/5161) (001/005)
   0.062004 - VendorID: 0665
   0.062124 - ProductID: 5161
   0.062146 - Manufacturer: unknown
   0.062167 - Product: unknown
   0.062187 - Serial Number: unknown
   0.062208 - Bus: 001
   0.062228 Trying to match device
   0.062353 Device matches
   0.062454 failed to claim USB device: could not claim interface 0: Device 
or resource busy
   0.073348 detached kernel driver from USB device...
   0.076465 Trying megatec protocol...
   0.080401 send: Q1
   0.121394 read: (NAK
   0.121522 blazer_status: short reply
   0.121556 Status read 1 failed
   0.125352 send: Q1
   0.353329 read: (244.6 244.8 000.0 000 50.1 2.27 22.9 0001
   0.360213 Status read in 2 tries
   0.360411 Supported UPS detected with megatec protocol
   0.364325 send: F
   0.473292 read: #240.0 008 072.0 50.0
   0.473529 Ratings read in 1 tries
   0.477254 send: I
   0.665233 read: #HV 2K  1907  
   0.665401 Vendor information read in 1 tries
   0.665430 Battery runtime will not be calculated (runtimecal not set)
   0.669193 send: Q1
   0.907001 read: (244.9 245.0 000.0 000 50.1 2.27 22.9 0001
   0.907419 dstate_init: sock /var/run/nut/blazer_usb-myups open on fd 5
   0.911124 send: Q1
   1.137095 read: (244.6 244.7 000.0 000 50.1 2.27 23.1 0001
   2.912571 send: Q1
   3.144496 read: (244.9 244.9 000.0 000 50.1 2.27 22.9 0001
   4.913049 send: Q1
   5.143904 read: (244.5 244.5 000.0 000 50.1 2.27 22.9 0001
   6.914350 send: Q1
   7.143320 read: (244.4 244.4 000.0 000 50.0 2.27 23.1 0001
   8.915790 send: Q1
   9.150716 read: (243.9 244.1 000.0 000 50.0 2.27 22.9 0001
  10.916183 send: Q1
  11.150764 read: (244.4 244.4 000.0 000 50.0 2.27 22.9 0001
  12.917569 send: Q1
  13.149529 read: (244.6 244.7 000.0 000 50.1 2.27 22.9 0001
  14.918002 send: Q1
  15.148930 read: (244.7 244.7 000.0 000 50.1 2.27 22.9 0001
  16.919376 send: Q1
  17.148335 read: (243.9 243.9 000.0 000 50.1 2.27 23.1 0001
  18.920816 send: Q1
  19.155742 read: (244.0 244.0 000.0 000 50.1 2.27 22.9 0001
  20.922219 send: Q1
  21.155152 read: (243.5 243.6 000.0 000 50.1 2.27 22.9 0001
  22.923990 send: Q1
  23.154551 read: (243.4 243.5 000.0 000 50.1 2.27 22.9 0001
  24.924000 send: Q1
  25.153961 read: (243.5 243.4 000.0 000 50.1 2.27 22.9 0001
  26.925439 send: Q1
  27.153370 read: (243.4 243.4 000.0 000 50.0 2.27 22.9 0001
  28.925810 send: Q1
  29.153021 read: (243.6 243.2 000.0 000 50.0 2.27 22.9 0001
  30.927216 send: Q1
  31.168175 read: (243.8 243.8 000.0 000 50.1 2.27 22.9 0001
  32.928658 send: Q1
  33.159580 read: (244.1 244.2 000.0 000 50.1 2.27 22.9 0001
  34.929031 send: Q1
  35.158990 read: (244.3 244.1 000.0 000 50.1 2.27 22.9 0001
  36.930435 send: Q1
  37.166391 read: (243.9 243.9 000.0 000 50.1 2.27 23.1 0001
  38.931163 send: Q1
  39.165799 read: (243.8 243.9 000.0 000 50.0 2.27 22.9 0001
  40.932245 send: Q1
  41.157205 read: (242.9 243.6 000.0 000 50.0 2.27 23.1 0001
  42.933684 send: Q1
  43.172646 read: (243.8 243.7 000.0 000 50.0 2.27 23.1 0001
  44.934347 send: Q1
  45.164014 read: (243.9 244.0 000.0 000 50.0 2.27 23.1 0001
  46.935463 send: Q1
  47.165539 read: (243.9 244.0 000.0 000 50.1 2.27 22.9 

Re: [Nut-upsuser] PowerShield Centurion 2000

2011-03-08 Thread Arjen de Korte

Citeren James Cameron :


# lsusb
Bus 001 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial


Try the blazer_usb driver instead. Make sure that any remaining NUT  
drivers that may be running in the background are terminated. Chances  
are that multiple drivers are now fighting for control over the UPS.


If that doesn't work, start the driver in debug mode and post the  
first 15 seconds worth of output here:


/path/to/blazer_usb -DDD -u root -a myups >  
PowerShield_Centurion_2000.log 2>&1


This will run the driver in the foreground and you'll have to kill it  
with Ctrl-C to stop it.


Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)


___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser