[OpenIndiana-discuss] PCIe card problem

2011-01-20 Thread Michelle Knight 
Hi Folks,

In my effort to save money, I bought a PCIe card that gave me two reasonably 
fast e-sata ports.

I've got a feeling that OI can't see the card and therefore won't use it. Am I 
right? Is there anything I can do about this?

The chipset is Marvell 9128

http://uk.startech.com/product/PEXESAT32-2-Port-SATA-6-Gbps-PCI-Express-eSATA-
Controller-Card

pci bus 0x0002 cardnum 0x00 function 0x00: vendor 0x1b4b device 0x9123
 Device unknown
 CardVendor 0x18ab card 0x9115 (Card unknown)
  STATUS0x0010  COMMAND 0x0047
  CLASS 0x01 0x06 0x01  REVISION 0x11
  BIST  0x00  HEADER 0x00  LATENCY 0x00  CACHE 0x10
  BASE0 0xef00 SIZE 8  I/O
  BASE1 0xee00 SIZE 4  I/O
  BASE2 0xed00 SIZE 8  I/O
  BASE3 0xec00 SIZE 4  I/O
  BASE4 0xeb00 SIZE 16  I/O
  BASE5 0xfbeff000 SIZE 2048  MEM
  BASEROM   0x  addr 0x
  MAX_LAT   0x00  MIN_GNT 0x00  INT_PIN 0x01  INT_LINE 0x0b
___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss

Re: [OpenIndiana-discuss] PCIe card problem

2011-01-20 Thread Bernd Helber 
Hi Michelle,

please have a look at the bug id and the thread.
Seems not to be supported.

On the other hand it may be possible that there is a proprietary driver
for SOL 10x86 out there.

Additionally go into your the BIOS options and set the SATA controller
mode to AHCI, hopefullly the device will be detected properly.

But now clue if it works, regardingt the driver issue. :-(


devfsadm -Cv

or  reconfigure reboot

reboot -- -r

-


cfgadm -al

 enable them

the targets and device names will be different...


  cfgadm -xsata_port_activate sata1/2


Activate the port: /devices/pci@0,0/pci1025,183@1f,2:2
This operation will enable activity on the SATA port
Continue (yes/no)? y


cfgadm -c configure  sata1/2

   cfgadm -al

sata1/2::dsk/c9t2d0disk connectedconfigured   ok


Am 20.01.11 17:07, schrieb Michelle Knight:
 Hi Folks,
 
 In my effort to save money, I bought a PCIe card that gave me two reasonably 
 fast e-sata ports.
 
 I've got a feeling that OI can't see the card and therefore won't use it. Am 
 I 
 right? Is there anything I can do about this?
 
 The chipset is Marvell 9128

http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6967157
http://opensolaris.org/jive/thread.jspa?messageID=491082


Good luck and fingers crossed.



 _.-|-/\-._
  \-'  '-.
 //\/\\/
   \/  ../.  \/
   _   //___\ |.
 . \ /   /\ ( #) |#)
   | |   /\   -.   __\
\V   )./_._(\
   .)/\   .- /  \_'_) )-..
   \ ./  /  /._./
   /\ '-' /
 '-._  v   _.-'
   / '-.__.ยท' \
 \/

 ***
 *This message has been scanned by DrWeb AV and Spamassassin

___
OpenIndiana-discuss mailing list
OpenIndiana-discuss@openindiana.org
http://openindiana.org/mailman/listinfo/openindiana-discuss