[otlkcon-devel] Install error
I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message > From: Ken Appell <[EMAIL PROTECTED]> > To: otlkcon-devel@lists.sourceforge.net > Sent: Sunday, December 16, 2007 5:27:28 PM > Subject: [otlkcon-devel] Install error > > I'm very interested in CalDav access with Outlook. I tried installing > the beta OCG software, but I received the following error: > > Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT > -2147023782. Contact your support personnel. > > I am running WinXP Pro SP2 > AMD Athlon 3200 > 1GB RAM > > thanks. > ken > > - > SF.Net email is sponsored by: > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services > for just about anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace > ___ > otlkcon-devel mailing list > otlkcon-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/otlkcon-devel > - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I try to expand the Open Connector folder. Outlook again freezes with "Not Responding" notification. I'm running Outlook 2007. ken Kervin L. Pierre wrote: Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: otlkcon-devel@lists.sourceforge.net Sent: Sunday, December 16, 2007 5:27:28 PM Subject: [otlkcon-devel] Install error I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Hello Ken, The plugin has not been optimized for speed at all and so is very, very slow. When you closed Open Connector the first time you may have corrupted the data file that it was configuring on the first run. Try deleting the data file and restarting Outlook. Please give the plugin a minute or two to build the data file ( as in the video at http://openconnector.org/demo/ ) But I must reiterate that the plugin is very slow for now. And there are few features that need to be completed before any work is done on speed. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 6:02:20 PM Subject: Re: [otlkcon-devel] Install error Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I try to expand the Open Connector folder. Outlook again freezes with "Not Responding" notification. I'm running Outlook 2007. ken Kervin L. Pierre wrote: Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: otlkcon-devel@lists.sourceforge.net Sent: Sunday, December 16, 2007 5:27:28 PM Subject: [otlkcon-devel] Install error I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Hey Kervin, I closed outlook and deleted the file. I then restarted outlook, but its unresponsive after 25 minutes. I know you said its slow, but this slow? I see that the new data file and the debug log haven't been touched since about 7 minutes after I restarted outlook. I may just be hung up. Last couple lines of the log: 0x0ba4 [19:31:28] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0938 [19:31:28] inside IMsgStore->GetReceiveFolder. 0x0420 [19:31:28] inside O_IABProvider->QueryInterface. {05EB1EB9-E334-4EB7-AC4D-0BCEC7C6E0C1} 0x0ba4 [19:31:28] inside ->O_IMSPMsgStore::QueryInterface. {00067262---C000-0046} 0x0420 [19:31:28] IABProvider::Logon() : AB_NO_DIALOG set. 0x0420 [19:31:28] inside O_IABProvider->Logon() ken Kervin L. Pierre wrote: Hello Ken, The plugin has not been optimized for speed at all and so is very, very slow. When you closed Open Connector the first time you may have corrupted the data file that it was configuring on the first run. Try deleting the data file and restarting Outlook. Please give the plugin a minute or two to build the data file ( as in the video at http://openconnector.org/demo/ ) But I must reiterate that the plugin is very slow for now. And there are few features that need to be completed before any work is done on speed. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 6:02:20 PM Subject: Re: [otlkcon-devel] Install error Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I try to expand the Open Connector folder. Outlook again freezes with "Not Responding" notification. I'm running Outlook 2007. ken Kervin L. Pierre wrote: Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: otlkcon-devel@lists.sourceforge.net Sent: Sunday, December 16, 2007 5:27:28 PM Subject: [otlkcon-devel] Install error I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Hello Ken, I see, thanks for the info. You have the addressbook provider enabled. It's not completed, and actually that's the next major component I will be working on. That option is actually there prematurely. Uncheck "Enable Addressbook Provider" both at the plugin level ( on the "general" tab ) and at the account level ( on the "accounts" tab ). Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 7:58:50 PM Subject: Re: [otlkcon-devel] Install error Hey Kervin, I closed outlook and deleted the file. I then restarted outlook, but its unresponsive after 25 minutes. I know you said its slow, but this slow? I see that the new data file and the debug log haven't been touched since about 7 minutes after I restarted outlook. I may just be hung up. Last couple lines of the log: 0x0ba4 [19:31:28] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0938 [19:31:28] inside IMsgStore->GetReceiveFolder. 0x0420 [19:31:28] inside O_IABProvider->QueryInterface. {05EB1EB9-E334-4EB7-AC4D-0BCEC7C6E0C1} 0x0ba4 [19:31:28] inside ->O_IMSPMsgStore::QueryInterface. {00067262---C000-0046} 0x0420 [19:31:28] IABProvider::Logon() : AB_NO_DIALOG set. 0x0420 [19:31:28] inside O_IABProvider->Logon() ken Kervin L. Pierre wrote: Hello Ken, The plugin has not been optimized for speed at all and so is very, very slow. When you closed Open Connector the first time you may have corrupted the data file that it was configuring on the first run. Try deleting the data file and restarting Outlook. Please give the plugin a minute or two to build the data file ( as in the video at http://openconnector.org/demo/ ) But I must reiterate that the plugin is very slow for now. And there are few features that need to be completed before any work is done on speed. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 6:02:20 PM Subject: Re: [otlkcon-devel] Install error Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I try to expand the Open Connector folder. Outlook again freezes with "Not Responding" notification. I'm running Outlook 2007. ken Kervin L. Pierre wrote: Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: otlkcon-devel@lists.sourceforge.net Sent: Sunday, December 16, 2007 5:27:28 PM Subject: [otlkcon-devel] Install error I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace___ otlkcon-devel mailing list otlkcon-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/otlkcon-devel
Re: [otlkcon-devel] Install error
Hi Kervin, That didn't do the trick. Outlook still hanging. Below are the last few lines of the log. Let me know if you want more. 0x0bd8 [10:47:50] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x0FFF0102 ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x0FFF0102 ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x3001001E ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x3001001E ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x0E090102 ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x0E090102 ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x662F001E ( ) 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] inside IMsgStore->Advise. 0x0d2c [10:47:50] inside OMSP_QueryInterface. 0x0bd8 [10:47:50] O_IMSPMsgStore(0x538CBB8)->O_IProp::GetProps() : Asking for 0x34140102 ( ) Kervin L. Pierre wrote: Hello Ken, I see, thanks for the info. You have the addressbook provider enabled. It's not completed, and actually that's the next major component I will be working on. That option is actually there prematurely. Uncheck "Enable Addressbook Provider" both at the plugin level ( on the "general" tab ) and at the account level ( on the "accounts" tab ). Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 7:58:50 PM Subject: Re: [otlkcon-devel] Install error Hey Kervin, I closed outlook and deleted the file. I then restarted outlook, but its unresponsive after 25 minutes. I know you said its slow, but this slow? I see that the new data file and the debug log haven't been touched since about 7 minutes after I restarted outlook. I may just be hung up. Last couple lines of the log: 0x0ba4 [19:31:28] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0938 [19:31:28] inside IMsgStore->GetReceiveFolder. 0x0420 [19:31:28] inside O_IABProvider->QueryInterface. {05EB1EB9-E334-4EB7-AC4D-0BCEC7C6E0C1} 0x0ba4 [19:31:28] inside ->O_IMSPMsgStore::QueryInterface. {00067262---C000-0046} 0x0420 [19:31:28] IABProvider::Logon() : AB_NO_DIALOG set. 0x0420 [19:31:28] inside O_IABProvider->Logon() ken Kervin L. Pierre wrote: Hello Ken, The plugin has not been optimized for speed at all and so is very, very slow. When you closed Open Connector the first time you may have corrupted the data file that it was configuring on the first run. Try deleting the data file and restarting Outlook. Please give the plugin a minute or two to build the data file ( as in the video at http://openconnector.org/demo/ ) But I must reiterate that the plugin is very slow for now. And there are few features that need to be completed before any work is done on speed. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 6:02:20 PM Subject: Re: [otlkcon-devel] Install error Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I try to expand the Open Connector folder. Outlook again freezes with "Not Responding" notification. I'm running Outlook 2007. ken Kervin L. Pierre wrote: Hello Ken, Thanks for the bug report. As a workaround, could you try downloading and installing... http://www.microsoft.com/downloads/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en Please let me know if that fixes the issue. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: otlkcon-devel@lists.sourceforge.net Sent: Sunday, December 16, 2007 5:27:28 PM Subject: [otlkcon-devel] Install error I'm very interested in CalDav access with Outlook. I tried installing the beta OCG software, but I received the following error: Module C:\WINDOWS\system32\msxml6.dll failed to register. HRESULT -2147023782. Contact your support personnel. I am running WinXP Pro SP2 AMD Athlon 3200 1GB RAM thanks. ken - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclic
Re: [otlkcon-devel] Install error
Hello Ken, Thanks. Unfortunately the logs are not very helpful with deadlock issues right now. But in the next build I will be outputing some deadlocking related logs that should help with these types of errors. Also I am looking into those issues myself right now, so maybe it may include a fix as well. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Sent: Friday, December 21, 2007 11:29:39 PM Subject: Re: [otlkcon-devel] Install error Nope. Any logs or anything I can give you? Kervin L. Pierre wrote: Hello Ken, Deleting the data file and restarting doesn't fix this? Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Friday, December 21, 2007 10:54:04 AM Subject: Re: [otlkcon-devel] Install error Hi Kervin, That didn't do the trick. Outlook still hanging. Below are the last few lines of the log. Let me know if you want more. 0x0bd8 [10:47:50] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x0FFF0102 ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x0FFF0102 ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x3001001E ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x3001001E ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x0E090102 ( ) 0x0874 [10:47:50] O_IFolder->O_IProp::GetProps() : Found 0x0E090102 ( ) 0x0874 [10:47:50] O_IFolder(0x538EE70)->O_IProp::GetProps() : Asking for 0x662F001E ( ) 0x0874 [10:47:50] inside ITable->InternalAdvise. 0x0874 [10:47:50] inside IMsgStore->Advise. 0x0d2c [10:47:50] inside OMSP_QueryInterface. 0x0bd8 [10:47:50] O_IMSPMsgStore(0x538CBB8)->O_IProp::GetProps() : Asking for 0x34140102 ( ) Kervin L. Pierre wrote: Hello Ken, I see, thanks for the info. You have the addressbook provider enabled. It's not completed, and actually that's the next major component I will be working on. That option is actually there prematurely. Uncheck "Enable Addressbook Provider" both at the plugin level ( on the "general" tab ) and at the account level ( on the "accounts" tab ). Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 7:58:50 PM Subject: Re: [otlkcon-devel] Install error Hey Kervin, I closed outlook and deleted the file. I then restarted outlook, but its unresponsive after 25 minutes. I know you said its slow, but this slow? I see that the new data file and the debug log haven't been touched since about 7 minutes after I restarted outlook. I may just be hung up. Last couple lines of the log: 0x0ba4 [19:31:28] O_IMSPMsgStore->O_IProp::GetProps() : Found 0x340D0003 ( ) 0x0938 [19:31:28] inside IMsgStore->GetReceiveFolder. 0x0420 [19:31:28] inside O_IABProvider->QueryInterface. {05EB1EB9-E334-4EB7-AC4D-0BCEC7C6E0C1} 0x0ba4 [19:31:28] inside ->O_IMSPMsgStore::QueryInterface. {00067262---C000-0046} 0x0420 [19:31:28] IABProvider::Logon() : AB_NO_DIALOG set. 0x0420 [19:31:28] inside O_IABProvider->Logon() ken Kervin L. Pierre wrote: Hello Ken, The plugin has not been optimized for speed at all and so is very, very slow. When you closed Open Connector the first time you may have corrupted the data file that it was configuring on the first run. Try deleting the data file and restarting Outlook. Please give the plugin a minute or two to build the data file ( as in the video at http://openconnector.org/demo/ ) But I must reiterate that the plugin is very slow for now. And there are few features that need to be completed before any work is done on speed. Best regards, Kervin - Original Message From: Ken Appell <[EMAIL PROTECTED]> To: Kervin L. Pierre <[EMAIL PROTECTED]> Cc: otlkcon-devel@lists.sourceforge.net Sent: Tuesday, December 18, 2007 6:02:20 PM Subject: Re: [otlkcon-devel] Install error Thanks Kevin. I was able to install and configure the open connector and I successfully connected to my caldav server. Unfortunately, when I clicked "ok" Outlook froze. I waited a while and forced it to close and then reopened. Everything works until I tr