adjustments to station playlist
I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" To: "'PC Audio Discussion List'" Sent: Saturday, December 18, 2010 3:18 PM Subject: RE: Question about mixing in Goldwave Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. Thanks. __ Information from ESET Smart Security, version of virus signature database 5714 (20101218) __ The message was checked by ESET Smart Security. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: adjustments to station playlist
Hi Bob. I think you can go through the options dialogue and uncheck the box which is defaulted to cross fading. If this option is removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: > > > I am using station play list for an over the air information radio station, > and would like to make adjustments to the play list, as the items are too > close together. This setting which I presume is the default setting would be > good for music stations, as you can move from one song to another with a > smooth transition, unfortunately it does not work well for voice, as some of > the items get clipped. Is there a way around this? > Thanks in advance > Bob . ., > > - Original Message - > From: "Walter" > To: "'PC Audio Discussion List'" > Sent: Saturday, December 18, 2010 3:18 PM > Subject: RE: Question about mixing in Goldwave > > >> Yes you can. 1. Record your verbal greeting. 2. Move it from your >> Olympus >> to your PC (you don't have to do this so long as you keep your Olympus >> connected to the PC throughout the process). 3. Launch Gold Wave and open >> the music file you wish to use. 4. Now with Gold Wave open the greeting >> you recorded. 5. While in this file do a control+A to select all the >> file >> then control+C to copy to the clipboard. 6. Press control+tab to take you >> to the music file you already opened. 7. Press ALT and arrow right to >> edit >> and then go down until you come to Mix and press enter. 8. You will now >> land on the part where you decide at what point you want the mix to start. >> It starts with hours then minutes then seconds and finally fractions of a >> second. 9. Once you have decided where you want the mix to begin press >> the >> tab key once and then the space bar to hear a preview. 10. If you are >> happy with the preview, tab to OK and press the space bar then save your >> file and that's it done. Walter. >> >> >> >> _ >> >> From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] >> On Behalf Of Dave McElroy WA6BEF >> Sent: 18 December 2010 19:43 >> To: 'PC Audio Discussion List' >> Subject: Question about mixing in Goldwave >> >> >> >> Ok, I don't own a mixer at this time, but I'd like to record a greeting >> and >> then place some music under it. Can this be done with Goldwave? Last >> time >> I did this we just recorded on the Olympus while standing near a speaker, >> but it sounded like it. >> >> Thanks. >> >> >> >> __ Information from ESET Smart Security, version of virus >> signature >> database 5714 (20101218) __ >> >> The message was checked by ESET Smart Security. >> >> http://www.eset.com >> >> >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org >> >> _ >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 >> >> To unsubscribe from this list, send a blank email to: >> pc-audio-unsubscr...@pc-audio.org > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org > To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: adjustments to station playlist
In my case we are using voice messages only, and there is no need for cross fading, just a fraction of a second for the transission of moving from one item to another. The information loop is very fast, as it moves from item to item. That fraction of a second would split things up quite nicely. . - Original Message - From: "Danny Miles" To: "PC Audio Discussion List" Sent: Saturday, December 18, 2010 5:16 PM Subject: Re: adjustments to station playlist Hi Bob. I think you can go through the options dialogue and uncheck the box which is defaulted to cross fading. If this option is removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" To: "'PC Audio Discussion List'" Sent: Saturday, December 18, 2010 3:18 PM Subject: RE: Question about mixing in Goldwave Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. Thanks. __ Information from ESET Smart Security, version of virus signature database 5714 (20101218) __ The message was checked by ESET Smart Security. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: adjustments to station playlist
I am also trying to figure out how to make station play list say the time! - Original Message - From: "Danny Miles" To: "PC Audio Discussion List" Sent: Saturday, December 18, 2010 5:16 PM Subject: Re: adjustments to station playlist Hi Bob. I think you can go through the options dialogue and uncheck the box which is defaulted to cross fading. If this option is removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" To: "'PC Audio Discussion List'" Sent: Saturday, December 18, 2010 3:18 PM Subject: RE: Question about mixing in Goldwave Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. Thanks. __ Information from ESET Smart Security, version of virus signature database 5714 (20101218) __ The message was checked by ESET Smart Security. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
RE: adjustments to station playlist
If you don't have the professional version of SPL you can't get the program to say the time...Paul -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Bob Seed Sent: Sunday, December 19, 2010 8:13 PM To: PC Audio Discussion List Subject: Re: adjustments to station playlist I am also trying to figure out how to make station play list say the time! - Original Message - From: "Danny Miles" To: "PC Audio Discussion List" Sent: Saturday, December 18, 2010 5:16 PM Subject: Re: adjustments to station playlist > Hi Bob. I think you can go through the options dialogue and uncheck > the box which is defaulted to cross fading. If this option is > removed, tracks will not have their volumes faded at the end, so you > shouldn't lose any vocals. However, I've only been using the > programme for a week or so, so maybe somebody more experienced will > confirm or contradict this. > > And, whilst I'm here, I have my own (more vague) Station Playlist > question. I'm using Studio Pro on a laptop with one soundcard and no > mixer. I've enabled my microphone, but either my microphone settings, > input/output settings or monitoring settings are faulty. When I > toggle the mic on I can't hear anything in my headphones. When I > toggle the mic off again I hear my vocals for about half a second > before it goes quiet again. I know this is quite a wide-ranging > question, but can anybody please advise on which setting might be > wrong? I've read the help information which relates to the settings > but I'm horribly confused with all of the input mixers and output > mixers etc (especially as I'm not using a mixer at all). > > Sorry for the basic question, but any help will be appreciated. > > Danny > > On 12/18/10, Bob Seed wrote: >> >> >> I am using station play list for an over the air information radio >> station, >> and would like to make adjustments to the play list, as the items are too >> close together. This setting which I presume is the default setting would >> be >> good for music stations, as you can move from one song to another with a >> smooth transition, unfortunately it does not work well for voice, as some >> of >> the items get clipped. Is there a way around this? >> Thanks in advance >> Bob . ., >> >> - Original Message - >> From: "Walter" >> To: "'PC Audio Discussion List'" >> Sent: Saturday, December 18, 2010 3:18 PM >> Subject: RE: Question about mixing in Goldwave >> >> >>> Yes you can. 1. Record your verbal greeting. 2. Move it from your >>> Olympus >>> to your PC (you don't have to do this so long as you keep your Olympus >>> connected to the PC throughout the process). 3. Launch Gold Wave and >>> open >>> the music file you wish to use. 4. Now with Gold Wave open the >>> greeting >>> you recorded. 5. While in this file do a control+A to select all the >>> file >>> then control+C to copy to the clipboard. 6. Press control+tab to take >>> you >>> to the music file you already opened. 7. Press ALT and arrow right to >>> edit >>> and then go down until you come to Mix and press enter. 8. You will now >>> land on the part where you decide at what point you want the mix to >>> start. >>> It starts with hours then minutes then seconds and finally fractions of >>> a >>> second. 9. Once you have decided where you want the mix to begin press >>> the >>> tab key once and then the space bar to hear a preview. 10. If you are >>> happy with the preview, tab to OK and press the space bar then save your >>> file and that's it done. Walter. >>> >>> >>> >>> _ >>> >>> From: pc-audio-boun...@pc-audio.org >>> [mailto:pc-audio-boun...@pc-audio.org] >>> On Behalf Of Dave McElroy WA6BEF >>> Sent: 18 December 2010 19:43 >>> To: 'PC Audio Discussion List' >>> Subject: Question about mixing in Goldwave >>> >>> >>> >>> Ok, I don't own a mixer at this time, but I'd like to record a greeting >>> and >>> then place some music under it. Can this be done with Goldwave? Last >>> time >>> I did this we just recorded on the Olympus while standing near a >>> speaker, >>> but it sounded like it. >>> >>> Thanks. >>> >>> >>> >>> __ I
Re: adjustments to station playlist
Good enough- Original Message - From: "Paul Hutson" To: "'PC Audio Discussion List'" Sent: Sunday, December 19, 2010 10:06 PM Subject: RE: adjustments to station playlist If you don't have the professional version of SPL you can't get the program to say the time...Paul -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Bob Seed Sent: Sunday, December 19, 2010 8:13 PM To: PC Audio Discussion List Subject: Re: adjustments to station playlist I am also trying to figure out how to make station play list say the time! - Original Message - From: "Danny Miles" To: "PC Audio Discussion List" Sent: Saturday, December 18, 2010 5:16 PM Subject: Re: adjustments to station playlist Hi Bob. I think you can go through the options dialogue and uncheck the box which is defaulted to cross fading. If this option is removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" To: "'PC Audio Discussion List'" Sent: Saturday, December 18, 2010 3:18 PM Subject: RE: Question about mixing in Goldwave Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. Thanks. __ Information from ESET Smart Security, version of virus signature database 5714 (20101218) __ The message was checked by ESET Smart Security. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list,
Re: adjustments to station playlist
i also cannot get spl to speak with jaws the list of tracks that appear when you search for a title: just get a list that says 1 through 8 or whatever. Dan - Original Message - From: "Bob Seed" I am also trying to figure out how to make station play list say the time! - Original Message - From: "Danny Miles" Hi Bob. I think you can go through the options dialogue and uncheck the box which is defaulted to cross fading. If this option is removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. __ Information from ESET Smart Security, version of virus signature database 5714 (20101218) __ The message was checked by ESET Smart Security. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
Re: adjustments to station playlist
Hi Dan. Once you've pressed enter on the search button, are you then pressing alt + R? This brings up the search results list. Danny On 12/20/10, dan kysor wrote: > i also cannot get spl to speak with jaws the list of tracks that > appear when you search for a title: just get a list that says 1 > through 8 or whatever. > Dan > > - Original Message - > From: "Bob Seed" To: "PC Audio Discussion List" Date sent: Sun, 19 Dec 2010 21:12:47 -0500 > Subject: Re: adjustments to station playlist > > > I am also trying to figure out how to make station play list say > the time! > > - Original Message - > From: "Danny Miles" To: "PC Audio Discussion List" Sent: Saturday, December 18, 2010 5:16 PM > Subject: Re: adjustments to station playlist > > > Hi Bob. I think you can go through the options dialogue and > uncheck > the box which is defaulted to cross fading. If this option is > removed, tracks will not have their volumes faded at the end, so > you > shouldn't lose any vocals. However, I've only been using the > programme for a week or so, so maybe somebody more experienced > will > confirm or contradict this. > > And, whilst I'm here, I have my own (more vague) Station > Playlist > question. I'm using Studio Pro on a laptop with one soundcard > and no > mixer. I've enabled my microphone, but either my microphone > settings, > input/output settings or monitoring settings are faulty. When I > toggle the mic on I can't hear anything in my headphones. When > I > toggle the mic off again I hear my vocals for about half a > second > before it goes quiet again. I know this is quite a wide-ranging > question, but can anybody please advise on which setting might > be > wrong? I've read the help information which relates to the > settings > but I'm horribly confused with all of the input mixers and > output > mixers etc (especially as I'm not using a mixer at all). > > Sorry for the basic question, but any help will be appreciated. > > Danny > > On 12/18/10, Bob Seed wrote: > > > I am using station play list for an over the air information > radio > station, > and would like to make adjustments to the play list, as the > items are too > close together. This setting which I presume is the default > setting would > be > good for music stations, as you can move from one song to > another with a > smooth transition, unfortunately it does not work well for > voice, as some > of > the items get clipped. Is there a way around this? > Thanks in advance > Bob . ., > > - Original Message - > From: "Walter" To: "'PC Audio Discussion List'" Sent: Saturday, December 18, 2010 3:18 PM > Subject: RE: Question about mixing in Goldwave > > > Yes you can. 1. Record your verbal greeting. 2. Move it from > your > Olympus > to your PC (you don't have to do this so long as you keep your > Olympus > connected to the PC throughout the process). 3. Launch Gold > Wave and > open > the music file you wish to use. 4. Now with Gold Wave open the > greeting > you recorded. 5. While in this file do a control+A to select > all the > file > then control+C to copy to the clipboard. 6. Press control+tab > to take > you > to the music file you already opened. 7. Press ALT and arrow > right to > edit > and then go down until you come to Mix and press enter. 8. You > will now > land on the part where you decide at what point you want the mix > to > start. > It starts with hours then minutes then seconds and finally > fractions of > a > second. 9. Once you have decided where you want the mix to > begin press > the > tab key once and then the space bar to hear a preview. 10. If > you are > happy with the preview, tab to OK and press the space bar then > save your > file and that's it done. Walter. > > > > _ > > From: pc-audio-boun...@pc-audio.org > [mailto:pc-audio-boun...@pc-audio.org] > On Behalf Of Dave McElroy WA6BEF > Sent: 18 December 2010 19:43 > To: 'PC Audio Discussion List' > Subject: Question about mixing in Goldwave > > > > Ok, I don't own a mixer at this time, but I'd like to record a > greeting > and > then place some music under it. Can this be done with Goldwave? > Last > time > I did this we just recorded on the Olympus while standing near a > speaker, > but it sounded like it. > Thanks. > > > > __ Information from ESET
Re: adjustments to station playlist
yes, its after i type alt r and get the list which wont read me the titles in jaws. I suspect the mosen-hardgen scripts areent working as well in jaws 12. Dan - Original Message - From: Danny Miles Hi Dan. Once you've pressed enter on the search button, are you then pressing alt + R? This brings up the search results list. Danny On 12/20/10, dan kysor wrote: i also cannot get spl to speak with jaws the list of tracks that appear when you search for a title: just get a list that says 1 through 8 or whatever. Dan - Original Message - From: "Bob Seed" removed, tracks will not have their volumes faded at the end, so you shouldn't lose any vocals. However, I've only been using the programme for a week or so, so maybe somebody more experienced will confirm or contradict this. And, whilst I'm here, I have my own (more vague) Station Playlist question. I'm using Studio Pro on a laptop with one soundcard and no mixer. I've enabled my microphone, but either my microphone settings, input/output settings or monitoring settings are faulty. When I toggle the mic on I can't hear anything in my headphones. When I toggle the mic off again I hear my vocals for about half a second before it goes quiet again. I know this is quite a wide-ranging question, but can anybody please advise on which setting might be wrong? I've read the help information which relates to the settings but I'm horribly confused with all of the input mixers and output mixers etc (especially as I'm not using a mixer at all). Sorry for the basic question, but any help will be appreciated. Danny On 12/18/10, Bob Seed wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" Yes you can. 1. Record your verbal greeting. 2. Move it from your Olympus to your PC (you don't have to do this so long as you keep your Olympus connected to the PC throughout the process). 3. Launch Gold Wave and open the music file you wish to use. 4. Now with Gold Wave open the greeting you recorded. 5. While in this file do a control+A to select all the file then control+C to copy to the clipboard. 6. Press control+tab to take you to the music file you already opened. 7. Press ALT and arrow right to edit and then go down until you come to Mix and press enter. 8. You will now land on the part where you decide at what point you want the mix to start. It starts with hours then minutes then seconds and finally fractions of a second. 9. Once you have decided where you want the mix to begin press the tab key once and then the space bar to hear a preview. 10. If you are happy with the preview, tab to OK and press the space bar then save your file and that's it done. Walter. _ From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
RE: adjustments to station playlist
I hate to say this guys but the scripts are working for me just fine in Jaws 12, the very latest updates even...Paul -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of dan kysor Sent: Monday, December 20, 2010 9:10 AM To: PC Audio Discussion List Subject: Re: adjustments to station playlist yes, its after i type alt r and get the list which wont read me the titles in jaws. I suspect the mosen-hardgen scripts areent working as well in jaws 12. Dan - Original Message - From: Danny Miles wrote: i also cannot get spl to speak with jaws the list of tracks that appear when you search for a title: just get a list that says 1 through 8 or whatever. Dan - Original Message - From: "Bob Seed" wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
RE: adjustments to station playlist
actually that's good news! Dan - Original Message - From: "Paul Hutson" I hate to say this guys but the scripts are working for me just fine in Jaws 12, the very latest updates even...Paul -Original Message- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of dan kysor Sent: Monday, December 20, 2010 9:10 AM To: PC Audio Discussion List Subject: Re: adjustments to station playlist yes, its after i type alt r and get the list which wont read me the titles in jaws. I suspect the mosen-hardgen scripts areent working as well in jaws 12. Dan - Original Message - From: Danny Miles wrote: i also cannot get spl to speak with jaws the list of tracks that appear when you search for a title: just get a list that says 1 through 8 or whatever. Dan - Original Message - From: "Bob Seed" wrote: I am using station play list for an over the air information radio station, and would like to make adjustments to the play list, as the items are too close together. This setting which I presume is the default setting would be good for music stations, as you can move from one song to another with a smooth transition, unfortunately it does not work well for voice, as some of the items get clipped. Is there a way around this? Thanks in advance Bob . ., - Original Message - From: "Walter" mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave McElroy WA6BEF Sent: 18 December 2010 19:43 To: 'PC Audio Discussion List' Subject: Question about mixing in Goldwave Ok, I don't own a mixer at this time, but I'd like to record a greeting and then place some music under it. Can this be done with Goldwave? Last time I did this we just recorded on the Olympus while standing near a speaker, but it sounded like it. http://www.eset.com To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org _ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1170 / Virus Database: 1435/3323 - Release Date: 12/18/10 To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
