[qubes-users] Re: Problem installing Qubes 4rc1 on Lenovo Thinkpad X200 - Installer hangs with VT-d enabled / without: libxenlight failed to create new domain (with/without iommo-tweak)
On Saturday, 5 August 2017 22:25:30 UTC+1, PR wrote: > I've installed Qubes 4 from USB with VT-d disabled which works but throws an > error in the end and which doesn't allow to start an AppVM: I have a Yoga S1 and I had the same problem. I was only able to install Qubes R3.2, also without Virtualization. After installing it, I'm able to use it though. I've already posted about this here: https://github.com/QubesOS/qubes-issues/issues/3001 Meanwhile, I'd do what I did - stick to R3.2 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/2bf1e4c0-4cda-4edd-907c-f0464d5525d5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Problem installing Qubes 4rc1 on Lenovo Thinkpad X200 - Installer hangs with VT-d enabled / without: libxenlight failed to create new domain (with/without iommo-tweak)
On Thursday, August 10, 2017 at 8:41:04 AM UTC+2, PR wrote: > Hello, > > > I've asked some days ago if someone has been able get Qubes OS 4rc1 up and > running on a Lenovo Thinkpad X200 (which works fine under Qubes 3.2) > > > Am 05.08.2017 11:25 nachm. schrieb "P R": > > > > > (...) > I've installed Qubes 4 from USB with VT-d disabled which works but throws an > error in the end and which doesn't allow to start an AppVM: > > > Start failed: internal error: libxenlight failed to create new domain > 'sys-firewall' > > > > I have also tried to create a new Fedora 25 based AppVM (HVM and non-HVM) and > run into the same error. > > > > I have enabled VT-d in the BIOS and rebooted, same error. I have > enabled/disabled iommu=igfx / no-igfx same problem. > > > Unfortunately it seems that I can't enable VT-d during Qubes installation as > the installer will halt with a black screen when VT-d is enabled. > See here for the hint regarding the Installation of Qubes 3.2 (?): > https://www.qubes-os.org/doc/thinkpad-troubleshooting/ > > > > As I didn't have any trouble installing and running Qubes 3.2 on the X200 > (with 8 GB RAM) I don't understand what is the problem with Qubes 4. > (...) > As I like to move forward I would like to know I the X200 can be used with > Qubes 4rc1 or if I need to get another machine (probably a X230 or T430). > > > Any feedback on this (X200 + Qubes 4.x = fail?) > > > Kind regards > > > - PhR I don't know enough to answer your question, but do you get any useful additional information when you remove 'rhgb quiet' from the xen boot parameters (which I assume is there)? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/419249db-498a-4f91-afb0-5a8ce627cefe%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[qubes-users] Re: Problem installing Qubes 4rc1 on Lenovo Thinkpad X200 - Installer hangs with VT-d enabled / without: libxenlight failed to create new domain (with/without iommo-tweak)
Hello, I've asked some days ago if someone has been able get Qubes OS 4rc1 up and running on a Lenovo Thinkpad X200 (which works fine under Qubes 3.2) Am 05.08.2017 11:25 nachm. schrieb "P R": (...) I've installed Qubes 4 from USB with VT-d disabled which works but throws an error in the end and which doesn't allow to start an AppVM: Start failed: internal error: libxenlight failed to create new domain 'sys-firewall' I have also tried to create a new Fedora 25 based AppVM (HVM and non-HVM) and run into the same error. I have enabled VT-d in the BIOS and rebooted, same error. I have enabled/disabled iommu=igfx / no-igfx same problem. Unfortunately it seems that I can't enable VT-d during Qubes installation as the installer will halt with a black screen when VT-d is enabled. See here for the hint regarding the Installation of Qubes 3.2 (?): https://www.qubes-os.org/doc/thinkpad-troubleshooting/ As I didn't have any trouble installing and running Qubes 3.2 on the X200 (with 8 GB RAM) I don't understand what is the problem with Qubes 4. (...) As I like to move forward I would like to know I the X200 can be used with Qubes 4rc1 or if I need to get another machine (probably a X230 or T430). Any feedback on this (X200 + Qubes 4.x = fail?) Kind regards - PhR -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/CAM8xnv%2BNngfoRcAYwLH_VF6Vp2eu9WSpBo80KUgHc1cbJPykOg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.