[rancid] ASA-5585 Enable mode
Hi All, Our current Cisco ASA devices "ASA5550" , 8.4(7)30, work fine with RANCID. Same config does not work for ASA-5585, 9.8(1). I am not sure why it is sending "admin" twice and later it sends "enable" at the prompt Any suggestions ? add user sslvpnb admin add password sslvpnb pass1 pass2 add autoenable sslvpnb 0 add method sslvpnb ssh [rancid@rancid ~]$ more var/asa/router.db sslvpn1;cisco;up sslvpn2;cisco;up sslvpna;cisco;up sslvpnb;cisco;up [rancid@rancid ~]$ clogin sslvpnb sslvpnb spawn ssh -c aes128-ctr,aes128-cbc,3des-cbc -x -l admin sslvpnb admin@sslvpnb's password: User admin logged in to sslvpnb Logins over the last 44 days: 29. Last login: 18:09:41 PST Dec 28 2017 from 68.181.191.19 Failed logins since the last login: 0. Last failed login: 06:47:32 PST Dec 28 2017 from 68.181.191.19 Type help or '?' for a list of available commands. sslvpnb> admin ^ ERROR: % Invalid input detected at '^' marker. Error: Unrecognized command, check your enable command sslvpnb> admin ^ ERROR: % Invalid input detected at '^' marker. sslvpnb> enable Password: Invalid password Password: Invalid password Password: Invalid password Access denied. sslvpnb> Thanks -Azher ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
Re: [rancid] Enterasys Switches help
Hi Chris,
I added following lines in the "rancid.types.base " otherwise there is just
a reference of enterasys to rivrancid.
enterasys;script;xrancid
enterasys;login;xlogin
enterasys;command;enterasys::ShowVersion;show version
enterasys;command;enterasys::WriteTerm;show config
Running in debug mode:
[rancid@rancid ~/etc]$ rancid -d -t enterasys cal3-n7
loadtype: device type enterasys
loadtype: found device type enterasys in /opt/rancid/etc/rancid.types.base
loadtype: undefined function in enterasys: enterasys::ShowVersion
Couldn't load device type spec for enterasys
I am not sure why it is complaining because xrancid does have this function
defined:
# This routine parses "show version"
sub ShowVersion {
print STDERR "In ShowVersion: $_" if ($debug);
And in the main routine:
# Main
@commandtable = (
{'show version' => 'ShowVersion'},
### {'show memory' => 'ShowMemory'},
### {'show diag'=> 'ShowDiag'},
### {'show switch' => 'ShowSwitch'},
### {'show slot'=> 'ShowSlot'},
# way too confusing {'show configuration detail'=> 'WriteTerm'},
{'show config' => 'WriteTerm'},
);
Trying rivrancid also complains about no commands:
[rancid@rancid ~]$ rivrancid -d cal3-n7
executing rivlogin -t 90 -c"system show uptime;system show version;system
show hardware;system show active-config" cal3-n7
cal3-n7: missed cmd(s): all commands
cal3-n7: End of run not found
cal3-n7: clean_run is false
!
Thanks
-Azher
On Thu, Dec 28, 2017 at 2:39 PM, Gauthier, Chris
wrote:
> I would take a look at the rancid types file to make sure it’s running the
> commands you need. It seems like it’s throwing up in the very beginning of
> its run.
>
>
>
> There are several emails in the list on how to get into a “debugging” mode
> if you’re not already familiar. That will help completely isolate the
> issue.
>
>
>
> --Chris
>
>
>
>
> Chris Gauthier Senior Network Engineer | comScore, Inc.
> t +1 *(503) 331-2704* <(503)%20331-2704> |
> *cgauth...@comscore.com*
> 317
>
> SW
>
> Alder
>
> Street,
>
> Suite
>
> 700
>
> |
>
> Portland,
>
> OR
>
> 97204
>
>United
>
> States
>
> *comscore.com*
Re: [rancid] Enterasys Switches help
I would take a look at the rancid types file to make sure it’s running the commands you need. It seems like it’s throwing up in the very beginning of its run. There are several emails in the list on how to get into a “debugging” mode if you’re not already familiar. That will help completely isolate the issue. --Chris Chris Gauthier Senior Network Engineer | comScore, Inc. t +1 (503) 331-2704 | cgauth...@comscore.com 317 SW Alder Street, Suite 700 | Portland, OR 97204 United States comscore.com This e-mail (including any attachments) may contain information that is private, confidential, or protected by attorney-client or other privilege. If you received this e-mail in error, please delete it from your system and notify sender. From: Rancid-discuss on behalf of Azher Date: Thursday, December 28, 2017 at 2:26 PM To: "rancid-discuss@shrubbery.net" Subject: [rancid] Enterasys Switches help Hi All, I have a large deployment of different Enterasys switches (S,K,B,C,D,7100). It seems rancid is not happy with these switches somehow. clogin to the same device successfully logs into the switch and gives prompt and I can type the commands. When trying "rancid-run -r cal3-n7", the log file throws this error: [rancid@rancid ~/var/logs]$ tail -f extreme.20171228.113653 starting: Thu Dec 28 11:36:53 PST 2017 Trying to get all of the configs. cal3-n7 xlogin error: Error: Unknown: "terminal" cal3-n7: missed cmd(s): show version,show config cal3-n7: End of run not found # = Getting missed routers: round 1. cal3-n7 xlogin error: Error: Unknown: "terminal" cal3-n7: missed cmd(s): show version,show config cal3-n7: End of run not found # All routers successfully completed. cvs diff: Diffing . cvs diff: Diffing configs cvs commit: Examining . cvs commit: Examining configs --- Here is the config section: [rancid@rancid ~/var/extreme]$ more router.db | grep cal3-n7 cal3-n7;enterasys;up # Extreme Switches add user cal3-n7 admin add autoenable cal3-n7 1 add password cal3-n7 add method cal3-n7 ssh I have gone through some of the scripts which are in the mailing list, tried them, but no luck. Any one has experience with Enterasys devices ? Any working scripts would greatly help. Thanks -Azher ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
[rancid] Enterasys Switches help
Hi All, I have a large deployment of different Enterasys switches (S,K,B,C,D,7100). It seems rancid is not happy with these switches somehow. clogin to the same device successfully logs into the switch and gives prompt and I can type the commands. When trying "rancid-run -r cal3-n7", the log file throws this error: [rancid@rancid ~/var/logs]$ tail -f extreme.20171228.113653 starting: Thu Dec 28 11:36:53 PST 2017 Trying to get all of the configs. cal3-n7 xlogin error: Error: Unknown: "terminal" cal3-n7: missed cmd(s): show version,show config cal3-n7: End of run not found # = Getting missed routers: round 1. cal3-n7 xlogin error: Error: Unknown: "terminal" cal3-n7: missed cmd(s): show version,show config cal3-n7: End of run not found # All routers successfully completed. cvs diff: Diffing . cvs diff: Diffing configs cvs commit: Examining . cvs commit: Examining configs --- Here is the config section: [rancid@rancid ~/var/extreme]$ more router.db | grep cal3-n7 cal3-n7;enterasys;up # Extreme Switches add user cal3-n7 admin add autoenable cal3-n7 1 add password cal3-n7 add method cal3-n7 ssh I have gone through some of the scripts which are in the mailing list, tried them, but no luck. Any one has experience with Enterasys devices ? Any working scripts would greatly help. Thanks -Azher ___ Rancid-discuss mailing list Rancid-discuss@shrubbery.net http://www.shrubbery.net/mailman/listinfo/rancid-discuss
