[Repeater-Builder] Re: Radius R100
--- In Repeater-Builder@yahoogroups.com, n9wys [EMAIL PROTECTED] wrote: ...I'm looking for the manuals for the Radius R100 repeater, or anything else that might help me with this animal... __ If you haven't tracked down a manual yet, you might watch ebay. Motorola manuals show up there fairly often. Until you get a book, this may get you going: MCR100 Alignment With the RF board positioned so that the legends are readable, the receiver coax enters at the top left [J1 labeled RX]. You will see three groups of cans with screw adjustments. Left to right these are FL1, FL2, and FL3. FL1 and FL2 are the RX RF filters. FL3 is the injection filter. With the cover off the shielded compartment, C201 is at the top right of the upper half of the compartment and C221 is at the lower right of the upper half of the compartment. R163 is to the right of the SL legend in the top part of the lower half of the shielded compartment. [TX rf only] Transmitter: VCO Adjustment. 1. Connect a DC voltmeter [input impedance 11 megohms or greater] from the steering line test point [SL] to ground. 2. Key the station. Adjust TX VCO control C221 for a reading of 6 VDC. Output Power Adjustment. 1. Adjust Output Voltage Set control R8 on the power supply regulator board for an A+ equal to 13.2 VDC +/-0.1 VDC. 2. Key the station and adjust High Power Set control R453 for 25 Watts [25 Watt stations] [there are several more steps in the book that can be followed for a complete alignment] Reference Oscillator Adjustment Key the station and adjust 2 PPM Frequency Control R163 [on the transmit RF board] for the exact transmit frequency +/-100 Hz. Receiver Adjustments: VCO adjustment. 1. Connect a DC voltmeter from the steering line test point [SL] to ground. 2. Adjust RX VCO control C201 for a reading of 6.0 VDC. After you set your RX steering line, put your voltmeter on the local oscillator test point [LO - near FL3]. Tune FL3 for maximum [2.5 to 3.5 VDC typical] Then you can tune the front end filters FL1 and FL2 for best SINAD. Finish up by fine tuning FL3 for best SINAD. Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[[Repeater-Builder] Re: Response: Nick Berg]
John, I won't hold your being a Democrat against you !(HI HI) The most important thing is..US (us) Americans. PERIOD. And the prosparity of our country inspite of the rest of the world. Sometimes that part gets lost in partisonship AND THAT'S BULL. PEOPLE NEEDS TO REOLIZE That how WE got to be the best country on the planet ! Freedom has to be fought for and died for. Thankfully my father didn't die for it but only had to fight for it. He landed on Normandy on the day after D-day. Thanks to HIM and ALL VETERANS 73 John and to ALL Coy --- In Repeater-Builder@yahoogroups.com, JOHN MACKEY [EMAIL PROTECTED] wrote: Coy- You and I have dis-agreed before, but today we are in TOTAL agreement. I feel like a minority, I am a democrat who SUPPORTS the war in Iraq supported the initial Iraq invasion. Coy Hilton [EMAIL PROTECTED] wrote: KEEP THIS IN MINDTHEY ARE WAITING TO DO EXACTLY THE SAME THING TO EACH AND EVERYONE OF US, IF WE LET THEM. I'M STILL PISSED ABOUT 9/11 THIS IS JUST MORE INDICATION AS WHAT THEY WOULD DO TO US ALL. These people want us all to be under their control or be dead. They are teaching their children the same thing here in their schools. A local man was talking to a 10 year old girl from a local ISLOMIC school and during the conversation he was told if he didn't want to be Islomic then he would have to be killed. I'm SO VERRY SORRY for the family and the rest of us 73 COY --- In Repeater-Builder@yahoogroups.com, Lloyd M. Mitchell [EMAIL PROTECTED] wrote: To the Berg Family, My condolences to you and your family. We live in times of great sacrifice and your son gave the ultimate sacrifice for our freedom and security. From my family to yours, my sincere prayers for you during this time. Lloyd Mitchell Florence SC Maire Company [EMAIL PROTECTED] wrote: - Original Message - From: Maire Company To: M. Bond Sent: Tuesday, May 11, 2004 6:02 PM Subject: Fw: [WFHSG] Very Sad News-Nick Berg: From his father Subject: [Tower-pro] Fw: Nick Berg: From his father To: [EMAIL PROTECTED] I just received this sad message from Nick Berg's father that I thought I should pass along to the Tower-pro mailing list. John Hettish - Original Message - Sent: Monday, May 10, 2004 2:14 PM Subject: Nick Berg: From his father To the customers and friends of Nick Berg and Prometheus Towers I am sorry to inform you that I just learned from the State Department in Baghdad, that my son, Nicholas E. Berg, was found lying dead along the side of a road near Baghdad. His body was discovered by a military convoy and identified definitely. He will be flown to Kuwait, and from there to Dover Air Force Base. I have no further information at this time. If you have unfinished business with Prometheus Towers, you may contact me, Michael Berg, at 610-696-8873 or [EMAIL PROTECTED] . Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[[Repeater-Builder] Re: Response: Nick Berg]
Right you are Richard! That's why I don't split hairs when I talk about it. 73 Coy --- In Repeater-Builder@yahoogroups.com, Richard [EMAIL PROTECTED] wrote: I had to jump in with a quick comment: I'm a democrat too... Terrorism has nothing to do with political party affiliation, but has everything to do with our very survival. Richard, N7TGB -Original Message- From: JOHN MACKEY [mailto:[EMAIL PROTECTED] Sent: Friday, May 14, 2004 12:04 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [[Repeater-Builder] Re: Response: Nick Berg] Coy- You and I have dis-agreed before, but today we are in TOTAL agreement. I feel like a minority, I am a democrat who SUPPORTS the war in Iraq supported the initial Iraq invasion. Coy Hilton [EMAIL PROTECTED] wrote: KEEP THIS IN MINDTHEY ARE WAITING TO DO EXACTLY THE SAME THING TO EACH AND EVERYONE OF US, IF WE LET THEM. I'M STILL PISSED ABOUT 9/11 THIS IS JUST MORE INDICATION AS WHAT THEY WOULD DO TO US ALL. These people want us all to be under their control or be dead. They are teaching their children the same thing here in their schools. A local man was talking to a 10 year old girl from a local ISLOMIC school and during the conversation he was told if he didn't want to be Islomic then he would have to be killed. I'm SO VERRY SORRY for the family and the rest of us 73 COY --- In Repeater-Builder@yahoogroups.com, Lloyd M. Mitchell [EMAIL PROTECTED] wrote: To the Berg Family, My condolences to you and your family. We live in times of great sacrifice and your son gave the ultimate sacrifice for our freedom and security. From my family to yours, my sincere prayers for you during this time. Lloyd Mitchell Florence SC Maire Company [EMAIL PROTECTED] wrote: - Original Message - From: Maire Company To: M. Bond Sent: Tuesday, May 11, 2004 6:02 PM Subject: Fw: [WFHSG] Very Sad News-Nick Berg: From his father Subject: [Tower-pro] Fw: Nick Berg: From his father To: [EMAIL PROTECTED] I just received this sad message from Nick Berg's father that I thought I should pass along to the Tower-pro mailing list. John Hettish - Original Message - Sent: Monday, May 10, 2004 2:14 PM Subject: Nick Berg: From his father To the customers and friends of Nick Berg and Prometheus Towers I am sorry to inform you that I just learned from the State Department in Baghdad, that my son, Nicholas E. Berg, was found lying dead along the side of a road near Baghdad. His body was discovered by a military convoy and identified definitely. He will be flown to Kuwait, and from there to Dover Air Force Base. I have no further information at this time. If you have unfinished business with Prometheus Towers, you may contact me, Michael Berg, at 610-696-8873 or [EMAIL PROTECTED] . Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[[Repeater-Builder] Re: Response: Nick Berg]
--- In Repeater-Builder@yahoogroups.com, Steve Grantham [EMAIL PROTECTED] wrote: Actually, I think we're in one hell of a mess! With Kerry and Bush to choose from, and the possibility of a spoiler entering the race, it's the devil you know vs. the ones you don't. Kerry's way too far to the left and sways in the wind like a tall pine. WELL.. PINES Usually SNAP in more than a breeze. Bush is just plain stupid! After all, anyone who'd speak out in support of an idea as flawed as Access BPL doesn't deserve the time of day, much less the highest office in the land! DOES THIS mean YOU have ALL KNOWLEGE and Know ALL? So, when Clinton ( THE LIAR) and Carville ( is IGNORANT) spoke of the economy, I guess Bush heard it and took it to heart, thinking they were calling him by name. What does that mean? I think many of the terrorists probably aren't sure what they are fighting for. WELL LET ME TELL YOU. THEY'RE FIGHTING FOR THE ABILITY TO KILL EACH ONE OF YOUR FAMILY INCLUDING YOUR WIFE, YOUR CHILDREN, YOUR GRAND CHILDREN (if you have any) AND, YOU, YOU, YOU. There are those, I'm sure, who think it's a Crusade by the Christians against Islam. And, there are those, on both sides, who would think it's all about survival. LET ME TELL YOU ...IT IS! YOURS and OURS! Then, there are probably those who would be happy with an Islamic New World Order just as long as they got one. So, I'd vote to send them all to be with Allah, I'D vote to send them to HELL. and their seventy virgins, regardless of anyone's party affiliation. And, this should sound reasonable, except that out pot has melted. WHAT? God bless the Berg's, and God bless America. He knows we need it! Steve, AA5SG (Regrets for the thread and the topic... At least the BPL part is repeater related on 10-meters and 6-meters.) - Original Message - From: Richard [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Friday, May 14, 2004 8:43 AM Subject: RE: [[Repeater-Builder] Re: Response: Nick Berg] I had to jump in with a quick comment: I'm a democrat too... Terrorism has nothing to do with political party affiliation, but has everything to do with our very survival. Richard, N7TGB -Original Message- From: JOHN MACKEY [mailto:[EMAIL PROTECTED] Sent: Friday, May 14, 2004 12:04 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [[Repeater-Builder] Re: Response: Nick Berg] Coy- You and I have dis-agreed before, but today we are in TOTAL agreement. I feel like a minority, I am a democrat who SUPPORTS the war in Iraq supported the initial Iraq invasion. Coy Hilton [EMAIL PROTECTED] wrote: KEEP THIS IN MINDTHEY ARE WAITING TO DO EXACTLY THE SAME THING TO EACH AND EVERYONE OF US, IF WE LET THEM. I'M STILL PISSED ABOUT 9/11 THIS IS JUST MORE INDICATION AS WHAT THEY WOULD DO TO US ALL. These people want us all to be under their control or be dead. They are teaching their children the same thing here in their schools. A local man was talking to a 10 year old girl from a local ISLOMIC school and during the conversation he was told if he didn't want to be Islomic then he would have to be killed. I'm SO VERRY SORRY for the family and the rest of us 73 COY --- In Repeater-Builder@yahoogroups.com, Lloyd M. Mitchell [EMAIL PROTECTED] wrote: To the Berg Family, My condolences to you and your family. We live in times of great sacrifice and your son gave the ultimate sacrifice for our freedom and security. From my family to yours, my sincere prayers for you during this time. Lloyd Mitchell Florence SC Maire Company [EMAIL PROTECTED] wrote: - Original Message - From: Maire Company To: M. Bond Sent: Tuesday, May 11, 2004 6:02 PM Subject: Fw: [WFHSG] Very Sad News-Nick Berg: From his father Subject: [Tower-pro] Fw: Nick Berg: From his father To: [EMAIL PROTECTED] I just received this sad message from Nick Berg's father that I thought I should pass along to the Tower-pro mailing list. John Hettish - Original Message - Sent: Monday, May 10, 2004 2:14 PM Subject: Nick Berg: From his father To the customers and friends of Nick Berg and Prometheus Towers I am sorry to inform you that I just learned from the State Department in Baghdad, that my son, Nicholas E. Berg, was found lying dead along the side of a road near Baghdad. His body was discovered by a military convoy and identified definitely. He will be flown to Kuwait, and from there to Dover Air Force Base. I have no further information at this time. If you have unfinished
[Repeater-Builder] Re: Response: Nick Berg
--- In Repeater-Builder@yahoogroups.com, Nate Duehr [EMAIL PROTECTED] wrote: Coy Hilton wrote: KEEP THIS IN MINDTHEY ARE WAITING TO DO EXACTLY THE SAME THING TO EACH AND EVERYONE OF US, IF WE LET THEM. I'M STILL PISSED ABOUT 9/11 THIS IS JUST MORE INDICATION AS WHAT THEY WOULD DO TO US ALL. These people want us all to be under their control or be dead. They are teaching their children the same thing here in their schools. A local man was talking to a 10 year old girl from a local ISLOMIC school and during the conversation he was told if he didn't want to be Islomic then he would have to be killed. I'm SO VERRY SORRY for the family and the rest of us 73 COY You might want to learn to spell the name of the religion you're claiming to be an expert on. I DON'T WANT to be an expert on it. Is that spelled correctly? You JUST DON'T GET IT DO YOU? Nate WY0X Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Re: Response: Nick Berg
KEN, You may be right. But I think MY COUNTRY and Fellow AMERICANS ARE MORE IMPORTANT than any ten repeaters. 73 Coy --- In Repeater-Builder@yahoogroups.com, Neil McKie [EMAIL PROTECTED] wrote: It because the issue keeps getting repeated here time after time? Neil (ILRP 20935) Ken Arck wrote: I am probably one of the more involved political wonks around and have great interest in what goes on politically and the War on Terror. And while I have nothing but the deepest sympathy for Nick Berg and his family, does this thread really belong on a mail list dealing with repeaters? Ken - President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Re: Response: Nick Berg
Folks: A friendly reminder: this is the repeater-builder group. It is not the group for political and/or religious flamewars. Please do you part to keep the signal-to-noise ratio acceptable. Thank you. Jeff disclaimer: I am not a moderator. Just a consumer of this list. But I don't have time or patience for this and I would hate to have to unsubscribe... At 08:44 PM 5/14/2004, you wrote: --- In Repeater-Builder@yahoogroups.com, Nate Duehr [EMAIL PROTECTED] wrote: Coy Hilton wrote: KEEP THIS IN MINDTHEY ARE WAITING TO DO EXACTLY THE SAME THING TO EACH AND EVERYONE OF US, IF WE LET THEM. I'M STILL PISSED ABOUT 9/11 THIS IS JUST MORE INDICATION AS WHAT THEY WOULD DO TO US ALL. These people want us all to be under their control or be dead. They are teaching their children the same thing here in their schools. A local man was talking to a 10 year old girl from a local ISLOMIC school and during the conversation he was told if he didn't want to be Islomic then he would have to be killed. I'm SO VERRY SORRY for the family and the rest of us 73 COY You might want to learn to spell the name of the religion you're claiming to be an expert on. I DON'T WANT to be an expert on it. Is that spelled correctly? You JUST DON'T GET IT DO YOU? Nate WY0X Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
RE: [Repeater-Builder] Re: Response: Nick Berg
You're right, this probably isn't the right venue, but it is something that affects each and every American. Richard -Original Message- From: Ken Arck [mailto:[EMAIL PROTECTED] Sent: Friday, May 14, 2004 6:07 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: Response: Nick Berg At 12:50 AM 5/15/2004 -, you wrote: KEN, You may be right. But I think MY COUNTRY and Fellow AMERICANS ARE MORE IMPORTANT than any ten repeaters. ---I'm in complete agreement with everything you say. I just don't believe this is the proper venue for this thread. Then again, I may be wrong Ken -- President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html Be sure to see our products at this year's Dayton Hamvention! Repeater Builders spaces 707 through 710 AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
[Repeater-Builder] Bandpass Duplexer Tuning Help
I have searched the RB home page and also the web for tuning help but am not coming up with what I need. I am trying to make a 4 can bandpass duplexer out of a couple of Waycom WP-436's (Double Can packages). I have a Tracking generator and am trying to come up with images of what it should look like since this is the first time I have had access to the fancy stuff. I have tuned up a set of them for the RX side but since this is my first time I am a bit unsure. I have a 3mb photo of the screen if anyone has some expirence using tracking generators and can take a look at the image for me for suggestions. I may be able to bump the resolution down a bit but I don't want the markers to get fuzzy. If anyone has a moment to take a peek let me know and I will e-mail it to you directly. Thanks, Rich Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Need Power Tr's for MSR
The MSR 2000 series transistors are no longer made or supported. They have been un-available for 5 or more years that I know of.. I have a complete AMP with M1131 -- M1132 -M1133 - M1134 transistors in it == IT IS BRAND NEW = NEVER hooked up or used It is complete but it is NOT the black heat sink like most.. I don't know why? I can send you some pictures... but we are talking $200 for the AMP. I purchased it for a back up unit, and now I no longer need it. I am in PA. On 14 May 2004 at 10:08, Gregg Lengling wrote: Looking for a M1131 and a M1132 for the predriver/driver stages of a VHF MSR2000 110 watt continuous duty amp. Anyone have any laying around??? Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Politics is the art of appearing candid and completely open, while concealing as much as possible. -States: The Bene Gesserit View Yahoo! Groups Links Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Need Power Tr's for MSR
Did you try RF Parts? (760) 744-0750 [EMAIL PROTECTED] Mike WA6ILQ At 10:08 AM 5/14/04 -0500, you wrote: Looking for a M1131 and a M1132 for the predriver/driver stages of a VHF MSR2000 110 watt continuous duty amp. Anyone have any laying around??? Gregg R. Lengling, W9DHI, Retired Administrator http://www.milwaukeehdtv.org K2/100 S#3075 KX1 S# 57 Politics is the art of appearing candid and completely open, while concealing as much as possible. -States: The Bene Gesserit View Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to:http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to:[EMAIL PROTECTED] Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Repeater-Builder] Re: Need Power Tr's for MSR
The TLD2600 series continuous duty amplifier is nearly identical to the Micor. You might be able to scrounge some from an old amp. The intermittant duty amp is different and even uses NPN power transistors! Henry, K4HAL --- In Repeater-Builder@yahoogroups.com, Gregg Lengling [EMAIL PROTECTED] wrote: Looking for a M1131 and a M1132 for the predriver/driver stages of a VHF MSR2000 110 watt continuous duty amp. Anyone have any laying around??? Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
Re: [Repeater-Builder] Bandpass Duplexer Tuning Help
Rich, I looked in my WACOM full-line catalog, and found no listing for a WP-436; the list jumps from WP-430-3 to WP-438-1. Both of these Bandpass Cavities are for the 144-174 MHz band. If you're certain about the model number, please provide the dimensions of the cavity itself, exclusive of the connectors and plunger hardware. Also, does each cavity have one or two connectors? Bandpass cavities, by themselves, seldom provide enough isolation for duplex operation. At crowded sites, a bandpass duplexer is usually used with separate antennas for TX and RX. Otherwise, two or more notch cavities are needed to take out the TX carrier while the bandpass cavities reduce the sideband noise. I must assume that you intend to use this duplexer on a repeater pair that has either a 5.0 MHz or 5.26 MHz split, true? Since you have a spectrum analyzer with a tracking generator, simply adjust the center plunger rod for a peak at the frequency of interest. Be careful to verify that the frequency calibration of the analyzer is right on the money. Now, adjust the loops for about 0.8 dB of insertion loss per cavity. Reverse the source and return connections several times to ensure that the cavity tuning is symmetrical. Once you have two cavities tuned individually, connect them in series and verify that the combined insertion loss is no more than about 1.7 dB. If the combined loss is significantly more than the summ of the individual losses, the length of the jumper cable must be changed until the VSWR is matched between the cavities. This matching of cavity VSWR is made much easier with a return loss bridge or a network analyzer, since you can achieve a match in a few seconds. Although a good RLB costs a few hundred bucks, it is worth its weight in gold! 73, Eric Lemmon WB6FLY Rich Garcia wrote: ... I am trying to make a 4 can bandpass duplexer out of a couple of Wacom WP-436's (Double Can packages). I have a Tracking generator and am trying to come up with images of what it should look like... Yahoo! Groups Links * To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ * To unsubscribe from this group, send an email to: [EMAIL PROTECTED] * Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
