Re: [Samba] home lan
On Wednesday 28 May 2008 10:04:08 pm David Kuntadi wrote: On Thu, May 29, 2008 at 12:39 AM, Skip Guenter [EMAIL PROTECTED] wrote: Yesterday I was VNCing into one of the crunchers and it wouldn't connect. Ran a .bat file I have that pings all the machines and tells me if any don't respond that should. Dang router (192.168.nnn.1) didn't respond... along with some of the other machines. After rebooting cable modem, router, wireless AP - NO CHANGE. For unrelated reasons I happened to crash my desktop (C17, the win XP box) a bit later... when it came back up all was fine and everybody on the network was again consistently pingable, sub 1ms. I'm concluding it's something to do with C17 being the one and only 'computer browser list maintainer' on the network. Maybe a bad conclusion but it still brings up that I think I need to address getting a 'backup computer browser' on the LAN. I think the only problem is IP address of individual computer. Is this still static of DHCP? If it is DHCP, which computer is running DHCP? If the problem occur again, please check both computers IP address. Even local dns would not help you to solve this as you are connecting using IP address. DNS only usefull if you are using name, not IP (to convert name to IP). DK Shorewall. DHCP Server and BIND are three ways to get a home LAN going. Shorewall will handle NAT and provide your security while DHCP Server will handle assigning IP address assignments. BIND will handle internal DNS stuff (and can even cache the External DNS.) All of these will allow Samba to work as well. Mandriva Linux even has a Wizard to set up all these sevices for you. --Shaun -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] 3.0.27a, ubuntu server7.10 auth issues
On Wednesday 05 December 2007 05:55:25 pm Guillermo Gutierrez wrote: Well, I tried it but no luck. Getent still won't display the AD users. Guillermo Gutierrez _ (818) 575-2017 (818) 324-0871 [EMAIL PROTECTED] -Original Message- From: Aaron J. Zirbes [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 05, 2007 3:51 PM To: Guillermo Gutierrez Subject: Re: [Samba] 3.0.27a, ubuntu server7.10 auth issues Have winbindd, smbd, nmbd all been restarted? ... just a guess since winbindd is saying it's getting requests of a different size than expected, and I've seen that when I've restarted one daemon, but not the other. You could also try clearing out your tdb cache files I know I run the following command on FreeBSD. I'm not exactly sure what it would be on ubuntu though /usr/local/samba/bin/tdbbackup -v /usr/local/samba/var/locks/*.tdb perhapse? tdbbackup -v var/samba/locks/*.tdb -- Aaron Guillermo Gutierrez wrote: I don't have nscd installed Guillermo Gutierrez _ (818) 575-2017 (818) 324-0871 [EMAIL PROTECTED] -Original Message- From: Aaron J. Zirbes [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 05, 2007 3:37 PM To: Guillermo Gutierrez Subject: Re: [Samba] 3.0.27a, ubuntu server7.10 auth issues Did you restart nscd? Guillermo Gutierrez wrote: I have upgraded to version 3.0.27a on ubuntu 7.10 server and now the getent command wont display the active directory users, but wbinfo will. It worked fine with 3.0.26a and I have not changed my configuration. I do however have this in my winbind log: [2007/12/04 13:39:01, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:39:01, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:44:09, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:44:09, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:44:09, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:44:09, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:44:09, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:44:18, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:44:18, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:45:34, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:45:34, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:45:54, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:46:19, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:46:19, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:46:19, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:49:35, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:49:35, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:49:35, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:49:35, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:49:35, 1] nsswitch/winbindd_ads.c:query_user_list(209) Not a user account? atype=0x3000 [2007/12/04 13:49:42, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:49:42, 0] nsswitch/winbindd.c:request_len_recv(544) request_len_recv: Invalid request size received: 2084 (expected 2088) [2007/12/04 13:50:17, 1] nsswitch/winbindd.c:main(990) winbindd version 3.0.27a started. Copyright Andrew Tridgell and the Samba Team 1992-2007 [2007/12/04 13:50:17, 0] nsswitch/winbindd_cache.c:initialize_winbindd_cache() initialize_winbindd_cache: clearing cache and re-creating with version
Re: [Bulk] [Samba] Trying to mount a Linux share on Windows
On Thursday 31 May 2007 05:34:48 pm Miguel Gonzalez Castaños wrote: bhoomikasc escribió: Hi, I am trying to mount a Linux directory onto the Windows box. I think this is not possible, you can't mount a ntfs partition of a Windows box from linux Am I right? You can mount Linux file systems on Windows you just have to have the right utilities to do so. Linux supports NTFS (NTVFS is another matter) with ntfs-3g now. --Shaun -- It isn't about it being free. Rather, its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Licensing Issues
On Thursday 17 May 2007 08:52:25 pm Nagendra S wrote: What licensing obligations/issues/problems will I have for a BSD application that I have written that links to a shared library built from Samba sources? Thanks. Nagendra Uh none as long as you share the source code if you ever use it of house. Read the GPL it will explain all your rights and responsibilities. --Shaun -- It isn't about it being free. Rather, its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] unix network printing
On Monday 14 May 2007 11:34:44 pm John Nietzsche wrote: Some time ago, i reached an internet site related to printer in unix environment. It was very useful since there was detailed information for hundreds of printer device capabilities and quality of support for each one; as also manufacturers. I remenber that based on such information i was able to perform a good purchase. The problem is that now, to the best of my recollection i can't recollect the site url! I wonder is someone here aware the site i am talking about could share the url with all the list. This is what you are looking for. --Shaun -- It isn't about it being free. Rather, its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Use Microsoft shared fax printer?
On Sunday 28 January 2007 09:56, Neil Aggarwal wrote: Hello: Is it possible to use Samba to send documents to a Microsoft Shared Fax Printer? How would I give it the phone number and other recipient details that normally comes in the popup window when I print to a shared fax printer from Windows? Thanks, Neil -- Neil Aggarwal, (214)986-3533, www.JAMMConsulting.com FREE! Eliminate junk email and reclaim your inbox. Visit http://www.spammilter.com for details. Yes it is using Hylafax Samba printer share. www.hylafax.org --Shaun -- Linux *is* user friendly. It's just selective about who its friends are. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba - CUPS - Fax
On Wednesday 04 October 2006 02:02, Tomas Srb wrote: Hi, I need fax on linux server shared with MSW stations. If I use samba without CUPS support, it is simple - lpr comman for printer Fax is replaced by my faxspool programm - this connect via tcp/ip small gui on workstation and ask user for fax number and description. When I use CUPS, this seen simple too - i wrote backend using my faxspool, this connect via tcp/ip... eee? Something is wrong! How I can resolve IP address of MSW workstation? Backend have only username of sender, some title of print (can I in smb.conf change title of printjob?), but any information about senders station are not :-(. I know, this is question on edge betwen CUPS and Samba... but please, help me, if You can. Best regards Tomas Srb P.S. Sorry about my english - this is not my native language (this is pascal :-) Take a look at Hylafax. Shaun -- It isn't about it being free. Rather, its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba - CUPS - Fax
Progress of sending and faxs in queue can user see through web interface (module in moregroupware). We send and receive cca 30 of faxs in day and may store of fax (in g3 or png) have about 1.5GB. Tomas There is a web interface for Hylafax available through Usermin which can be downloaded from www.webmin.com, The Hylafax plugins are available at www.hylafax.org If you use a Postscript driver for Hylafax you can send graphics as well as receive them. --Shaun -- It isn't about it being free. Rather, its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Question about SWAT
On Monday 18 September 2006 19:51, Ivan Arteaga wrote: Hello, I have installed centos 4.3 and the build-in samba implementation, I tried to run SWAT but it appears to be not installed, I already have the samba service configured and running and I would like to know if it's possible to install SWAT without reinstalling samba, or should I run some command in order to activate it? I don't know if I'm missing something o_0 If somebody can give me a hand it will be appreciated!! --Ivan. yum install swat That should do it. If not you can download the SWAT RPM through www.samba.org --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba and Printing
On Wednesday 30 August 2006 01:15, Komal Shah wrote: Thanks Shaun for quick reply. I am having trouble with Dell Photo 964.Can I setup raw queue so that Windows drive will do the processing ? Komal Yes unless the Windows driver requires a hard direct connection to the printer. Lexmark is the actual manufacturer of your printer. (Sorry to be the one to tell you that.) However, if you setup up Windows to look at the port as if its a direct connection you may be able to cheat a bit. I had a HP inkjet that I could set up to share with Linux systems but Windows clients balked because they required that the USB connection was in place at the computer you were printing from. So while the Linux clients could all send print jobs to the CUPS server for that printer none of the Windows clients could. The Windows driver would balk immediately if the USB cable wasn't directly plugged in to the computer you wanted to print from. BTW because it is a Lexmark printer don't expect a Linux driver anytime soon. --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba and Printing
On Wednesday 30 August 2006 01:50, Komal Shah wrote: . BTW because it is a Lexmark printer don't expect a Linux driver anytime soon. --Shaun In short it is not possible to print to Windows printer if native driver is not available for Linux. Komal No Linux will most likely never be able to print to it but your Windows Clients can if its connected to the Samba Server and the driver driver for it will allow you to connect via a network connection. --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
[Samba] Ports
Okay my smb.conf file is correct. Firewall is configured correctly to allow Samba on local network. smbd and nmbd are running. Her computer still cannot connect to my printer share. I read my Samba version wrong its actually 3.0.23a-1.fc5.1, here is my smb.conf: [global] workgroup = HOME realm = SHAUN server string = Samba Server security = SHARE encrypt passwords = No log file = /var/log/samba/%m.log max log size = 50 dns proxy = No wins support = Yes ldap ssl = no admin users = shaun read list = shaun write list = shaun printer admin = shaun cups options = raw [printers] comment = All Printers path = /usr/spool/samba guest ok = Yes printable = Yes browseable = No [LaserJet_4] comment = HP LaserJet 4/4M path = /usr/spool/samba read only = No guest ok = Yes printable = Yes printer name = LaserJet_4 oplocks = No share modes = No I am using Fedora Core 5 She has Windows XP Media Center Edition. I cannot see her computer at all when I try to browse with smb4k or with my file manager. She cannot can see my computer if I scan from her station but she cannot connect to me. I ran a scan on SMB ports from her and they show as open so she should see my printer but doesn't. My firewall is reporting the attempt of ports like 35578 attempting to make an inbound connection from her. Did MS change things again or is there something else? --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
[Samba] Firewall Log - Follow up on Samba Issue
Here is the firewall log indicating what ports are being used when I try and make an SMB connection: Time:Aug 30 03:08:32 Direction: Inbound In:eth0 Out: Port:34365 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:08:45 Direction: Inbound In:eth0 Out: Port:34368 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:11:55 Direction: Inbound In:eth0 Out: Port:34370 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:12:06 Direction: Inbound In:eth0 Out: Port:34373 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:12:07 Direction: Inbound In:eth0 Out: Port:34374 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:15:41 Direction: Inbound In:eth0 Out: Port:34398 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:15:43 Direction: Inbound In:eth0 Out: Port:34399 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 03:15:53 Direction: Inbound In:eth0 Out: Port:34400 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:37 Direction: Inbound In:eth0 Out: Port:34481 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34487 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34488 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34487 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34488 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34487 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown Time:Aug 30 04:16:38 Direction: Inbound In:eth0 Out: Port:34488 Source:192.168.1.100 Destination:192.168.1.101 Length:90 TOS:0x00 Protocol:UDP Service:Unknown I seriously doubt its anything on my Samba Share at this point. She can see my port open but cannot connect to my Samba Server. Her computer reports that there is no other computer connected to the HOME network. Even though a scan from her computer shows the SMB ports as open on mine. Now my question is; Is anyone testing Vista Beta with Samba? --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
[Samba] Basic Printer Share
I can't seem to get a Windows XP Media Center Edition system to see a very simple print share. [global] workgroup = HOME realm = SHAUN server string = Samba Server security = SHARE encrypt passwords = No log file = /var/log/samba/%m.log max log size = 50 dns proxy = No wins support = Yes valid users = shaun admin users = shaun read list = shaun write list = shaun printer admin = shaun cups options = raw [printers] comment = All Printers path = /usr/spool/samba printable = Yes browseable = No [LaserJet_4] comment = HP LaserJet 4/4M path = /usr/spool/samba read only = No guest ok = Yes printable = Yes printer name = LaserJet_4 oplocks = No share modes = No Anyone have any clues here? Only thing I can think of is possibly my valid user list, but I have guest ok = Yes in the print share. -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Basic Printer Share
Still No Go. Printer isn't being seen. Going to mess with Firewall and see if that's the issue. Don't think so since I don't remember enabling it ever but who knows. Some distros pull stunts behind your back. BTW its 3.0.023b on FC5 --Shaun On Tuesday 29 August 2006 16:49, Dale Schroeder wrote: Try it without the valid users parameter. You don't list the version of Samba you are using, but starting with 3.0.23, there are numerous issues with valid users =. It is getting better with 3.0.23a and 3.0.23b, but not completely resolved. I am hoping all will be resolved in 3.0.23c so that I can upgrade. Dale Shaun Marolf wrote: I can't seem to get a Windows XP Media Center Edition system to see a very simple print share. [global] workgroup = HOME realm = SHAUN server string = Samba Server security = SHARE encrypt passwords = No log file = /var/log/samba/%m.log max log size = 50 dns proxy = No wins support = Yes valid users = shaun admin users = shaun read list = shaun write list = shaun printer admin = shaun cups options = raw [printers] comment = All Printers path = /usr/spool/samba printable = Yes browseable = No [LaserJet_4] comment = HP LaserJet 4/4M path = /usr/spool/samba read only = No guest ok = Yes printable = Yes printer name = LaserJet_4 oplocks = No share modes = No Anyone have any clues here? Only thing I can think of is possibly my valid user list, but I have guest ok = Yes in the print share. -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Samba and Printing
On Wednesday 30 August 2006 00:18, Komal Shah wrote: Hello, I have quick question about Printing with Samba.I want to print to printer connected to Windows machine.I do not have drive for Linux of the printer.Should I create raw queue in Linux to print to Windows printer? If i do not have suitable driver for Linux for printer is it still possible to print to windows printer ? I tired postscript printer but it is not working. Thanks Regards, Komal It is much easier to have Windows print to a Samba server than it is to print to Windows from any Unix. I have successfully setup shared printers on a Samba Server that I had no Linux driver for. Though the server could not print to the attached printer all my Windows clients could as Samba Print queue just sent raw data straight through so all the printer got was the file that Windows created before it sent it to the Samba print share. Now as far as printing to your printer from Linux, if the post script driver does not work then you may not be able to do so. Have you used Google to see if a driver is available? Since you didn't state what brand it was all I can add is if its a Brother I bet you will find a driver at their web site. --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
Re: [Samba] Connection scripts with the 'prexec' clause
On Monday 14 August 2006 14:57, Maurice Forte wrote: Hi all, I am running Samba 3.0.20B on an AIX server with SECURITY=USER using an LDAP backend.I am looking for a way to capture the actual username(%USER_NAME%) that the client user is logged onto his individual workstation with and compare it with the user(%u) they are connecting with the share as.If they are different, I want to reject the user's connection. After doing some reading, it appears that a connection script with the 'preexec' clause is the way to go but the Samba environment variables only can intrepret client's hostname, netbios name, and ip address. Is there a way for me to capture the client's logon id(%USERNAME%) or accomplish this task another way? Thanks in advance, Maurice Forte I believe you can use LDAP to handle the security measures you are talking about. I don't know how to set LDAP to do that but someone in a LDAP forum should. However, keep in mind such a scheme may cause an issue if you have users working on a shared project that is kept in one, or both, of their users folders on the server. You should allow users the option to let other users access their files if need be. Again I have no clue how to setup LDAP to handle this but I believe it can be done. --Shaun -- It isn't about it being free. Rather its about the freedom it brings. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba