Re: [Samba] winbind - samba4

2012-12-13 Thread Clodonil Trigo
Hello Thomas,

That was it. I made a link in / lib64 and resolved.


Clodonil


2012/12/13 Thomas Simmons 

> I just got to this point in my testing. Be sure you link the files to
> /lib64 if you are running a 64 bit version of CentOS. I was having the same
> problem and realized the files needed to go in /lib64.
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-13 Thread Thomas Simmons
Hello Clodonil,

I just got to this point in my testing. Be sure you link the files to
/lib64 if you are running a 64 bit version of CentOS. I was having the same
problem and realized the files needed to go in /lib64.
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-05 Thread Clodonil Trigo
Hello,

I solved the problem;

solution:

# ln-s / usr/local/samba/lib/libnss_winbind.so.2 / lib64/libnss_winbind.so
# ln-s / lib / libnss_winbind.so / lib/libnss_winbind.so.2

to:

# ln-s / usr/local/samba/lib/libnss_winbind.so.2 / lib64/libnss_winbind.so
# ln-s / lib64/libnss_winbind.so / lib64/libnss_winbind.so.2

success with getent.

thank you,

Migration completed successfully

Clodonil



Prof. Msc. Clodonil H. Trigo
www.nisled.org
E-mail: clodo...@nisled.org

Classificação: () Confidencial (X) Interna
As informações contidas nesta mensagem e respectivos anexos são de
interesse exclusivo a quem foram dirigidos, podendo ser confidenciais,
portanto fica proibida sua retenção, distribuição, divulgação, reprodução
ou utilização, sob as penas da lei. Caso tenha recebido esta mensagem por
engano, pedimos a gentileza de informar ao seu autor, eliminando-a de sua
caixa de entrada, registros ou sistema de controle.



2012/12/5 Hleb Valoshka <375...@gmail.com>

> On 12/5/12, Clodonil Trigo  wrote:
> > The pipe is in /usr/local/samba/var/run/winbindd. The winbind this
> working
> > because the wbinfo returns successfully. I think that is something
> between
> > the centos and the lib's winbind.
>
> Yep, I wasn't correct: in Debian one can have the opposite issue --
> working nss but not wbinfo. Sorry :(
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-05 Thread Hleb Valoshka
On 12/5/12, Clodonil Trigo  wrote:
> The pipe is in /usr/local/samba/var/run/winbindd. The winbind this working
> because the wbinfo returns successfully. I think that is something between
> the centos and the lib's winbind.

Yep, I wasn't correct: in Debian one can have the opposite issue --
working nss but not wbinfo. Sorry :(
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-05 Thread Clodonil Trigo
Hi Andrew,

The pipe is in /usr/local/samba/var/run/winbindd. The winbind this working
because the wbinfo returns successfully. I think that is something between
the centos
and the lib's winbind.


Clodonil

Prof. Msc. Clodonil H. Trigo
www.nisled.org
E-mail: clodo...@nisled.org

Classificação: () Confidencial (X) Interna
As informações contidas nesta mensagem e respectivos anexos são de
interesse exclusivo a quem foram dirigidos, podendo ser confidenciais,
portanto fica proibida sua retenção, distribuição, divulgação, reprodução
ou utilização, sob as penas da lei. Caso tenha recebido esta mensagem por
engano, pedimos a gentileza de informar ao seu autor, eliminando-a de sua
caixa de entrada, registros ou sistema de controle.



2012/12/4 Andrew Bartlett 

> On Mon, 2012-12-03 at 22:11 +0200, Hleb Valoshka wrote:
> > On 12/3/12, Clodonil Trigo  wrote:
> > > I am using centos 6.3 and did the migration from samba3 to Samba4.
> More the
> > > "getent passwd" does not return users.
> > > I made the link:
> > > ln-s /usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so
> > > ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2
> >
> > I had similar problem but with Debian package, so I'm not sure that
> > I'll help you (debian samba4 package is rather interesting thing) but
> > in my case the problem was that libnss_winbind expects socket to be in
> > /tmp/.winbind/ (or .winbindd? Check with "strings".) while winbind
> > component stores it in /var/run/samba4/winbind/ (I don't know the
> > correct path for your case). Try to make bind mount of socket
> > directory or set correct path in smb.conf.
>
> If the package is expecting a different path, then it is almost
> certainly also expecting a different version of the winbind pipe
> protocol, so this would not help.
>
> Andrew Bartlett
>
> --
> Andrew Bartletthttp://samba.org/~abartlet/
> Authentication Developer, Samba Team   http://samba.org
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Andrew Bartlett
On Mon, 2012-12-03 at 22:11 +0200, Hleb Valoshka wrote:
> On 12/3/12, Clodonil Trigo  wrote:
> > I am using centos 6.3 and did the migration from samba3 to Samba4. More the
> > "getent passwd" does not return users.
> > I made the link:
> > ln-s /usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so
> > ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2
> 
> I had similar problem but with Debian package, so I'm not sure that
> I'll help you (debian samba4 package is rather interesting thing) but
> in my case the problem was that libnss_winbind expects socket to be in
> /tmp/.winbind/ (or .winbindd? Check with "strings".) while winbind
> component stores it in /var/run/samba4/winbind/ (I don't know the
> correct path for your case). Try to make bind mount of socket
> directory or set correct path in smb.conf.

If the package is expecting a different path, then it is almost
certainly also expecting a different version of the winbind pipe
protocol, so this would not help.

Andrew Bartlett

-- 
Andrew Bartletthttp://samba.org/~abartlet/
Authentication Developer, Samba Team   http://samba.org


-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-04 Thread Hleb Valoshka
On 12/4/12, Clodonil Trigo  wrote:

> I did not think the process of winbind, I believe it is internal to samba.

There is no separate winbindd process in samba4. There are several
*.so providing this service.

> I did several test before migrating to the samba3 Samba4 and had success in
> all cases. More time to make real the problem gave winbind.

But have you tried?

> What line you changed in smb.conf?

I'm still using bind mount :) But option you need is "winbindd socket
directory".
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-04 Thread Rowland Penny

On 04/12/12 14:44, Clodonil Trigo wrote:

Hi,

Commands:

[root@lost var]# ps ax | grep samba
23756 ?S  0:00 /usr/local/samba/sbin/samba
23757 ?S  0:38 /usr/local/samba/sbin/samba
23758 ?S  0:03 /usr/local/samba/sbin/samba
23761 ?S  0:00 /usr/local/samba/sbin/smbd --option=server 
role check:inhibit=yes --foreground
23803 ?S  0:00 /usr/local/samba/sbin/smbd --option=server 
role check:inhibit=yes --foreground
23818 ?S  1:04 /usr/local/samba/sbin/smbd --option=server 
role check:inhibit=yes --foreground
23826 ?S  0:36 /usr/local/samba/sbin/smbd --option=server 
role check:inhibit=yes --foreground



[root@lost var]# ps ax | grep winbind
30147 pts/2S+ 0:00 grep winbind


/usr/local/samba/etc/smb.conf

[global]
workgroup = KEEPERS.BRASIL
realm = KEEPERSBRASIL.COM 
netbios name = LOST
server role = active directory domain controller
server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, 
winbind, ntp_signd, kcc, dnsupdate

idmap_ldb:use rfc2307=Yes

[usuarios]
path = /V01/Dados/usuarios
read only = No
create mask = 2777
directory mask = 2777


[netlogon]
path = 
/usr/local/samba4-migracao/var/locks/sysvol/keepersbrasil.com/scripts 


read only = No

[sysvol]
path = /usr/local/samba4-migracao/var/locks/sysvol
read only = No


Clodonil

2012/12/4 Rowland Penny mailto:rpe...@f2s.com>>

'ps ax | grep samba



--
This message has been scanned for viruses and
dangerous content by *MailScanner* , and is
believed to be clean. 

Well, I am lost now, you only have the samba & smbd daemons running.
The users must be there as wbinfo -u shows them.
Selinux is Disabled (I take it that the server has been restarted since 
selinux was disabled)
Is there anything in any of the logs? /var/log/messages 
/usr/local/samba/var/log.samba
Have you tried joining another unix pc to the domain and running getent 
from there?


Rowland


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-04 Thread Clodonil Trigo
Hi,

Commands:

[root@lost var]# ps ax | grep samba
23756 ?S  0:00 /usr/local/samba/sbin/samba
23757 ?S  0:38 /usr/local/samba/sbin/samba
23758 ?S  0:03 /usr/local/samba/sbin/samba
23761 ?S  0:00 /usr/local/samba/sbin/smbd --option=server role
check:inhibit=yes --foreground
23803 ?S  0:00 /usr/local/samba/sbin/smbd --option=server role
check:inhibit=yes --foreground
23818 ?S  1:04 /usr/local/samba/sbin/smbd --option=server role
check:inhibit=yes --foreground
23826 ?S  0:36 /usr/local/samba/sbin/smbd --option=server role
check:inhibit=yes --foreground


[root@lost var]# ps ax | grep winbind
30147 pts/2S+ 0:00 grep winbind


/usr/local/samba/etc/smb.conf

[global]
workgroup = KEEPERS.BRASIL
realm = KEEPERSBRASIL.COM
netbios name = LOST
server role = active directory domain controller
server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbind,
ntp_signd, kcc, dnsupdate
idmap_ldb:use rfc2307=Yes

[usuarios]
path = /V01/Dados/usuarios
read only = No
create mask = 2777
directory mask = 2777


[netlogon]
path = /usr/local/samba4-migracao/var/locks/sysvol/keepersbrasil.com/scripts
read only = No

[sysvol]
path = /usr/local/samba4-migracao/var/locks/sysvol
read only = No


Clodonil

2012/12/4 Rowland Penny 

> 'ps ax | grep samba
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-04 Thread Rowland Penny

On 04/12/12 14:17, Clodonil Trigo wrote:
Yes, this Samba4 running. Add users normally. All other features of 
Samba4 this OK.

Only winbind not.

The Winbind there is pid or socket?

Clodonil

Prof. Msc. Clodonil H. Trigo
www.nisled.org 
E-mail: clodo...@nisled.org 

Classificação: () Confidencial (X) Interna
As informações contidas nesta mensagem e respectivos anexos são de 
interesse exclusivo a quem foram dirigidos, podendo ser confidenciais, 
portanto fica proibida sua retenção, distribuição, divulgação, 
reprodução ou utilização, sob as penas da lei. Caso tenha recebido 
esta mensagem por engano, pedimos a gentileza de informar ao seu 
autor, eliminando-a de sua caixa de entrada, registros ou sistema de 
controle.




2012/12/4 Rowland Penny mailto:rpe...@f2s.com>>

On 04/12/12 13:13, Clodonil Trigo wrote:

Olá Rowland,

Yes, the command getent returns the users of the  /etc/passwd,
more not return of Samba4.

look selinux:

[root@lost samba]# cat /etc/selinux/config
SELINUX=disabled
SELINUXTYPE=targeted


I do not know what can be.


Clodonil


2012/12/4 Rowland Penny mailto:rpe...@f2s.com>>

This is strange, wbinfo -u shows all your users in samba 4,
but getent returns nothing, getent should at least return
your unix users, i.e. root etc.
I take it that after the classicupgrade you have turned
samba3 off, so could this be Selinux?



-- 
This message has been scanned for viruses and

dangerous content by *MailScanner*
, and is
believed to be clean.

OK, are sure that Samba4 is running? what does 'ps ax | grep
samba' return? and does 'ps ax | grep winbind' return anything?


Rowland


-- 
This message has been scanned for viruses and

dangerous content by *MailScanner* ,
and is
believed to be clean.



--
This message has been scanned for viruses and
dangerous content by *MailScanner* , and is
believed to be clean. 

Please post the output of 'ps ax | grep samba' and 'ps ax | grep winbind'

Winbindd is a pipe and should be in /usr/local/samba/var/run/winbindd

Also could you please post your /usr/local/samba/etc/smb.conf

Rowland


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Clodonil Trigo
Yes, this Samba4 running. Add users normally. All other features of Samba4
this OK.
Only winbind not.

The Winbind there is pid or socket?

Clodonil

Prof. Msc. Clodonil H. Trigo
www.nisled.org
E-mail: clodo...@nisled.org

Classificação: () Confidencial (X) Interna
As informações contidas nesta mensagem e respectivos anexos são de
interesse exclusivo a quem foram dirigidos, podendo ser confidenciais,
portanto fica proibida sua retenção, distribuição, divulgação, reprodução
ou utilização, sob as penas da lei. Caso tenha recebido esta mensagem por
engano, pedimos a gentileza de informar ao seu autor, eliminando-a de sua
caixa de entrada, registros ou sistema de controle.



2012/12/4 Rowland Penny 

>  On 04/12/12 13:13, Clodonil Trigo wrote:
>
> Olá Rowland,
>
>  Yes, the command getent returns the users of the  /etc/passwd, more not
> return of Samba4.
>
>  look selinux:
>
>  [root@lost samba]# cat /etc/selinux/config
>   SELINUX=disabled
>  SELINUXTYPE=targeted
>
>
>  I do not know what can be.
>
>
>  Clodonil
>
>
> 2012/12/4 Rowland Penny 
>
>> This is strange, wbinfo -u shows all your users in samba 4, but getent
>> returns nothing, getent should at least return your unix users, i.e. root
>> etc.
>> I take it that after the classicupgrade you have turned samba3 off, so
>> could this be Selinux?
>>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* , and is
> believed to be clean.
>
> OK, are sure that Samba4 is running? what does 'ps ax | grep samba'
> return? and does 'ps ax | grep winbind' return anything?
>
>
> Rowland
>
>
> --
> This message has been scanned for viruses and
> dangerous content by *MailScanner* , and is
> believed to be clean.
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Rowland Penny

On 04/12/12 13:13, Clodonil Trigo wrote:

Olá Rowland,

Yes, the command getent returns the users of the  /etc/passwd, more 
not return of Samba4.


look selinux:

[root@lost samba]# cat /etc/selinux/config
SELINUX=disabled
SELINUXTYPE=targeted


I do not know what can be.


Clodonil


2012/12/4 Rowland Penny mailto:rpe...@f2s.com>>

This is strange, wbinfo -u shows all your users in samba 4, but
getent returns nothing, getent should at least return your unix
users, i.e. root etc.
I take it that after the classicupgrade you have turned samba3
off, so could this be Selinux?



--
This message has been scanned for viruses and
dangerous content by *MailScanner* , and is
believed to be clean. 
OK, are sure that Samba4 is running? what does 'ps ax | grep samba' 
return? and does 'ps ax | grep winbind' return anything?


Rowland


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Clodonil Trigo
Olá Rowland,

Yes, the command getent returns the users of the  /etc/passwd, more not
return of Samba4.

look selinux:

[root@lost samba]# cat /etc/selinux/config
SELINUX=disabled
SELINUXTYPE=targeted


I do not know what can be.


Clodonil


2012/12/4 Rowland Penny 

> This is strange, wbinfo -u shows all your users in samba 4, but getent
> returns nothing, getent should at least return your unix users, i.e. root
> etc.
> I take it that after the classicupgrade you have turned samba3 off, so
> could this be Selinux?
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Rowland Penny

On 04/12/12 11:52, Clodonil Trigo wrote:
I used this howto. Several tests made ​​prior to migration, and in any 
case worked.


Its make a debug this?


Clodonil

2012/12/3 Rowland Penny mailto:rpe...@f2s.com>>

Hi, I take it that you have followed the upgrade howto at:

https://wiki.samba.org/index.php/Samba4/samba-tool/domain/classicupgrade/HOWTO
If you haven't, go there and see if you have missed a step.



--
This message has been scanned for viruses and
dangerous content by *MailScanner* , and is
believed to be clean. 


This is strange, wbinfo -u shows all your users in samba 4, but getent 
returns nothing, getent should at least return your unix users, i.e. 
root etc.
I take it that after the classicupgrade you have turned samba3 off, so 
could this be Selinux?


Rowland

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Clodonil Trigo
I used this howto. Several tests made ​​prior to migration, and in any case
worked.

Its make a debug this?


Clodonil

2012/12/3 Rowland Penny 

> Hi, I take it that you have followed the upgrade howto at:
> https://wiki.samba.org/index.**php/Samba4/samba-tool/domain/**
> classicupgrade/HOWTO
> If you haven't, go there and see if you have missed a step.
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-04 Thread Clodonil Trigo
Hi Hleb,

I did not think the process of winbind, I believe it is internal to samba.
I did several test before migrating to the samba3 Samba4 and had success in
all cases. More time to make real the problem gave winbind.

What line you changed in smb.conf?


Prof. Msc. Clodonil H. Trigo
www.nisled.org
E-mail: clodo...@nisled.org

Classificação: () Confidencial (X) Interna
As informações contidas nesta mensagem e respectivos anexos são de
interesse exclusivo a quem foram dirigidos, podendo ser confidenciais,
portanto fica proibida sua retenção, distribuição, divulgação, reprodução
ou utilização, sob as penas da lei. Caso tenha recebido esta mensagem por
engano, pedimos a gentileza de informar ao seu autor, eliminando-a de sua
caixa de entrada, registros ou sistema de controle.



2012/12/3 Hleb Valoshka <375...@gmail.com>

> On 12/3/12, Clodonil Trigo  wrote:
> > I am using centos 6.3 and did the migration from samba3 to Samba4. More
> the
> > "getent passwd" does not return users.
> > I made the link:
> > ln-s /usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so
> > ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2
>
> I had similar problem but with Debian package, so I'm not sure that
> I'll help you (debian samba4 package is rather interesting thing) but
> in my case the problem was that libnss_winbind expects socket to be in
> /tmp/.winbind/ (or .winbindd? Check with "strings".) while winbind
> component stores it in /var/run/samba4/winbind/ (I don't know the
> correct path for your case). Try to make bind mount of socket
> directory or set correct path in smb.conf.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Re: [Samba] winbind - samba4

2012-12-03 Thread Hleb Valoshka
On 12/3/12, Clodonil Trigo  wrote:
> I am using centos 6.3 and did the migration from samba3 to Samba4. More the
> "getent passwd" does not return users.
> I made the link:
> ln-s /usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so
> ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2

I had similar problem but with Debian package, so I'm not sure that
I'll help you (debian samba4 package is rather interesting thing) but
in my case the problem was that libnss_winbind expects socket to be in
/tmp/.winbind/ (or .winbindd? Check with "strings".) while winbind
component stores it in /var/run/samba4/winbind/ (I don't know the
correct path for your case). Try to make bind mount of socket
directory or set correct path in smb.conf.
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-03 Thread Rowland Penny

On 03/12/12 17:01, Clodonil Trigo wrote:

On 03/12/12 12:07, Clodonil Trigo wrote:
* Hi,*>>**>>* I am using centos 6.3 and did the migration from samba3 to Samba4. More the*>>* "getent passwd" does not return users.*>>**>>* I made the link:*>>* ln-s 
/usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so*>>* ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2*>>**>>* And change in /etc/nsswitch:*>>**>>* passwd: files 
winbind*>>* shadow: files*>>* group: files winbind*>>**>>* When I run the command:*>>**>>* /usr/local/samba/bin/wbinfo-u*>>**>>* Returns correctly.*>>**>>* 
Can anyone help me.*>Hi, have you tried restarting Samba4?

Rowland
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.**

I did restart, but it did not work. The Samba4 is working normal. Only
getent not.

Clodonil
Hi, I take it that you have followed the upgrade howto at: 
https://wiki.samba.org/index.php/Samba4/samba-tool/domain/classicupgrade/HOWTO

If you haven't, go there and see if you have missed a step.

Rowland

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba


Re: [Samba] winbind - samba4

2012-12-03 Thread Rowland Penny

On 03/12/12 12:07, Clodonil Trigo wrote:

Hi,

I am using centos 6.3 and did the migration from samba3 to Samba4. More the
"getent passwd" does not return users.

I made the link:
ln-s /usr/local/samba/lib/libnss_winbind.so.2 / lib/libnss_winbind.so
ln-s /lib/libnss_winbind.so /lib/libnss_winbind.so.2

And change in /etc/nsswitch:

passwd: files winbind
shadow: files
group: files winbind

When I run the command:

/usr/local/samba/bin/wbinfo-u

Returns correctly.

Can anyone help me.

Hi, have you tried restarting Samba4?

Rowland

--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba