Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
I would like to report that v3.1.0 also suffer from the same issue as described below. So now I am back to v3.0.1, I think many mail will be missing if I continue to test. I believei it should be able to resolve quickly. - Original Message From: david boh <[EMAIL PROTECTED]> To: spamdyke-users@spamdyke.org Sent: Tuesday, November 13, 2007 11:22:01 PM Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. I have two server. One I install the latest spamdyke v3.1.1, let's call this server A and the other server B. Both have spamdyke v3.1.1, using plesk. But when I send email via webmail from server A to the server B email, some how the email cannot be delivered. When I check server B the log shows a lot of Broken pipe. How I know as all the email was trap in server A queue, so I force qmail to send and immediately check the server log in server B. Nov 13 22:19:52 manna spamdyke[19583]: ERROR: unable to write 36 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 1542 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 36 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 1542 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 36 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 1542 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 36 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 1542 bytes to file descriptor 1: Broken pipe Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 36 bytes to file descriptor 1: Broken pipe So I install v3.0.1 in server B (with the same configuration) and did the same thing by forcing qmail to send the trap queue. Now all the email is send through. At this point I have kept v3.1.1 on server A to see if there are other issue. Have to down grade to v3.0.1 as both email send via webmail cannot be transmitted. It seems like v3.1.1 need to resolve this critical issue. I hope some how this report will help to resolve the issue. Send instant messages to your online friends http://uk.messenger.yahoo.com Send instant messages to your online friends http://uk.messenger.yahoo.com ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Can you send more information about your setup? Could you send the contents of your /etc/xinetd.d/smtp_psa file and your spamdyke configuration file (if you have one)? -- Sam Clippinger david boh wrote: > I would like to report that v3.1.0 also suffer from the same issue as > described below. > > So now I am back to v3.0.1, I think many mail will be missing if I > continue to test. > > I believei it should be able to resolve quickly. > > - Original Message > From: david boh <[EMAIL PROTECTED]> > To: spamdyke-users@spamdyke.org > Sent: Tuesday, November 13, 2007 11:22:01 PM > Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > I have two server. One I install the latest spamdyke v3.1.1, let's call > this server A and the other server B. > > Both have spamdyke v3.1.1, using plesk. But when I send email via > webmail from server A to the server B email, some how the email cannot > be delivered. > When I check server B the log shows a lot of Broken pipe. How I know as > all the email was trap in server A queue, so I force qmail to send and > immediately check the server log in server B. > > Nov 13 22:19:52 manna spamdyke[19583]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > > So I install v3.0.1 in server B (with the same configuration) and did > the same thing by forcing qmail to send the trap queue. Now all the > email is send through. > > At this point I have kept v3.1.1 on server A to see if there are other > issue. > > Have to down grade to v3.0.1 as both email send via webmail cannot be > transmitted. > > It seems like v3.1.1 need to resolve this critical issue. I hope some > how this report will help to resolve the issue. > > Send instant messages to your online friends http://uk.messenger.yahoo.com > > > Send instant messages to your online friends http://uk.messenger.yahoo.com > > > > > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users ___ spamdyke-users mailing list spamdyke-users@spamdyke.org http://www.spamdyke.org/mailman/listinfo/spamdyke-users
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Sure my friend. Both server has the same smtp_psa and configure ( both server have 3.0.1 and duplicate/mirror setting) SMTP_PSA { socket_type = stream protocol= tcp wait= no disable = no user= root instances = UNLIMITED server = /var/qmail/bin/tcp-env server_args = -Rt0 /var/qmail/bin/relaylock /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true } SPAMDYKE.CONF log-level=2 local-domains-file=/var/qmail/control/rcpthosts max-recipients=30 idle-timeout-secs=300 graylist-dir=/var/qmail/spamdyke/graylist graylist-min-secs=120 graylist-max-secs=1814400 #greeting-delay-secs = 1 sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients # reject-empty-rdns # reject-unresolvable-rdns # reject-ip-in-cc-rdns # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip reject-missing-sender-mx check-dnsrbl=dul.dnsbl.sorbs.net #check-dnsrbl=sbl.spamhaus.org - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Wednesday, November 14, 2007 12:13:44 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. Can you send more information about your setup? Could you send the contents of your /etc/xinetd.d/smtp_psa file and your spamdyke configuration file (if you have one)? -- Sam Clippinger david boh wrote: > I would like to report that v3.1.0 also suffer from the same issue as > described below. > > So now I am back to v3.0.1, I think many mail will be missing if I > continue to test. > > I believei it should be able to resolve quickly. > > - Original Message > From: david boh <[EMAIL PROTECTED]> > To: spamdyke-users@spamdyke.org > Sent: Tuesday, November 13, 2007 11:22:01 PM > Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > I have two server. One I install the latest spamdyke v3.1.1, let's call > this server A and the other server B. > > Both have spamdyke v3.1.1, using plesk. But when I send email via > webmail from server A to the server B email, some how the email cannot > be delivered. > When I check server B the log shows a lot of Broken pipe. How I know as > all the email was trap in server A queue, so I force qmail to send and > immediately check the server log in server B. > > Nov 13 22:19:52 manna spamdyke[19583]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 1542 bytes > to file descriptor 1: Broken pipe > Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 36 bytes > to file descriptor 1: Broken pipe > > So I install v3.0.1 in server B (with the same configuration) and did > the same thing by forcing qmail to send the trap queue. Now all the > email is send through. > > At this point I have kept v3.1.1 on server A to see if there are other > issue. > > Have to down grade to v3.0.1 as both email send via webmail cannot be > transmitted. > > It seems like v3.1.1 need to resolve this critical issue. I hope some > how this report will help to resolve the issue. > > Send instant messages to your online friends http://uk.messenger.yahoo.com > > > Send instant messages to your online friends http://uk.messenger.yahoo.com > > > > > ___ > spamdyke-users mailing list > spamdyke-users@spamdyke.org > http://www.spamdyke.org/mailman/listinfo/spamdyke-users __
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
I got a tip a while back from another Plesk user that you have to run spamdyke before relaylock to avoid these errors. So in your /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: server_args = -Rt0 /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true I need to update the documentation to include this. -- Sam Clippinger david boh wrote: > Sure my friend. > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > and duplicate/mirror setting) > > SMTP_PSA > { > socket_type = stream > protocol= tcp > wait= no > disable = no > user= root > instances = UNLIMITED > server = /var/qmail/bin/tcp-env > server_args = -Rt0 /var/qmail/bin/relaylock > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > } > > SPAMDYKE.CONF > log-level=2 > local-domains-file=/var/qmail/control/rcpthosts > max-recipients=30 > idle-timeout-secs=300 > graylist-dir=/var/qmail/spamdyke/graylist > graylist-min-secs=120 > graylist-max-secs=1814400 > #greeting-delay-secs = 1 > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > # reject-empty-rdns > # reject-unresolvable-rdns > # reject-ip-in-cc-rdns > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > reject-missing-sender-mx > check-dnsrbl=dul.dnsbl.sorbs.net > #check-dnsrbl=sbl.spamhaus.org > > - Original Message > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Wednesday, November 14, 2007 12:13:44 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > Can you send more information about your setup? Could you send the > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > configuration file (if you have one)? > > -- Sam Clippinger > > david boh wrote: > > I would like to report that v3.1.0 also suffer from the same issue as > > described below. > > > > So now I am back to v3.0.1, I think many mail will be missing if I > > continue to test. > > > > I believei it should be able to resolve quickly. > > > > - Original Message > > From: david boh <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > > To: spamdyke-users@spamdyke.org <mailto:spamdyke-users@spamdyke.org> > > Sent: Tuesday, November 13, 2007 11:22:01 PM > > Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > > > I have two server. One I install the latest spamdyke v3.1.1, let's call > > this server A and the other server B. > > > > Both have spamdyke v3.1.1, using plesk. But when I send email via > > webmail from server A to the server B email, some how the email cannot > > be delivered. > > When I check server B the log shows a lot of Broken pipe. How I know as > > all the email was trap in server A queue, so I force qmail to send and > > immediately check the server log in server B. > > > > Nov 13 22:19:52 manna spamdyke[19583]: ERROR: unable to write 36 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 1542 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19585]: ERROR: unable to write 36 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 1542 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19580]: ERROR: unable to write 36 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 1542 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19586]: ERROR: unable to write 36 bytes > > to file descriptor 1: Broken pipe > > Nov 13 22:19:52 manna spamdyke[19587]: ERROR: unable to write 1542 bytes > > to file descriptor 1: Broken pipe > &g
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Hi Sam, Test Step: 1. Re-install spamdyke 3.1.1 in both server 2. Place the spamdyke before relaylock pipe in xinetd.d 3. Restart xinetd 4. Repeat 2 and 3 of the other server. 5. Did the test, using webmail and send from server A to server B. Did the same on the other end. Both email did not leave the server just hang in qmail queue. So I revert both spamdyke to 3.0.1. (position of spamdyke still before relaylock) Force qmail to send qmail queue. All email goes without any problem. So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have problem with mail send via webmail. Through-out this test no configuration change for spamdyke.conf, whitelist, blacklist all configure file is the same. - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Thursday, November 15, 2007 2:09:29 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. I got a tip a while back from another Plesk user that you have to run spamdyke before relaylock to avoid these errors. So in your /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: server_args = -Rt0 /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true I need to update the documentation to include this. -- Sam Clippinger david boh wrote: > Sure my friend. > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > and duplicate/mirror setting) > > SMTP_PSA > { > socket_type = stream > protocol= tcp > wait= no > disable = no > user= root > instances = UNLIMITED > server = /var/qmail/bin/tcp-env > server_args = -Rt0 /var/qmail/bin/relaylock > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > } > > SPAMDYKE.CONF > log-level=2 > local-domains-file=/var/qmail/control/rcpthosts > max-recipients=30 > idle-timeout-secs=300 > graylist-dir=/var/qmail/spamdyke/graylist > graylist-min-secs=120 > graylist-max-secs=1814400 > #greeting-delay-secs = 1 > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > # reject-empty-rdns > # reject-unresolvable-rdns > # reject-ip-in-cc-rdns > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > reject-missing-sender-mx > check-dnsrbl=dul.dnsbl.sorbs.net > #check-dnsrbl=sbl.spamhaus.org > > ----- Original Message > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Wednesday, November 14, 2007 12:13:44 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > Can you send more information about your setup? Could you send the > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > configuration file (if you have one)? > > -- Sam Clippinger > > david boh wrote: > > I would like to report that v3.1.0 also suffer from the same issue as > > described below. > > > > So now I am back to v3.0.1, I think many mail will be missing if I > > continue to test. > > > > I believei it should be able to resolve quickly. > > > > - Original Message > > From: david boh <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > > To: spamdyke-users@spamdyke.org <mailto:spamdyke-users@spamdyke.org> > > Sent: Tuesday, November 13, 2007 11:22:01 PM > > Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > > > I have two server. One I install the latest spamdyke v3.1.1, let's call > > this server A and the other server B. > > > > Both have spamdyke v3.1.1, using plesk. But when I send email via > > webmail from server A to the server B email, some how the email cannot > > be delivered. > > When I check server B the log shows a lot of Broken pipe. How I know as > > all the email was trap in server A queue, so I force qmail to send and > > immediately check the server log in server B. > > > > Nov 13 22:19:52 manna spamdyke[19583]: ERROR: unable to write 36 bytes > >
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
This is very strange. When the messages remain in the queue, are you seeing any errors in the qmail logs? Can you enable spamdyke's full logging on the receiving server and send me a log of a failed delivery? -- Sam Clippinger david boh wrote: > Hi Sam, > > Test Step: > 1. Re-install spamdyke 3.1.1 in both server > 2. Place the spamdyke before relaylock pipe in xinetd.d > 3. Restart xinetd > 4. Repeat 2 and 3 of the other server. > 5. Did the test, using webmail and send from server A to server B. Did > the same on the other end. > > Both email did not leave the server just hang in qmail queue. > > So I revert both spamdyke to 3.0.1. (position of spamdyke still before > relaylock) > Force qmail to send qmail queue. All email goes without any problem. > > So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have > problem with mail send via webmail. > > Through-out this test no configuration change for spamdyke.conf, > whitelist, blacklist all configure file is the same. > > > - Original Message > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Thursday, November 15, 2007 2:09:29 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > I got a tip a while back from another Plesk user that you have to run > spamdyke before relaylock to avoid these errors. So in your > /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: > server_args= -Rt0 /usr/local/bin/spamdyke --config-file > /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > > I need to update the documentation to include this. > > -- Sam Clippinger > > david boh wrote: > > Sure my friend. > > > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > > and duplicate/mirror setting) > > > > SMTP_PSA > > { > >socket_type= stream > >protocol= tcp > >wait= no > >disable= no > >user= root > >instances = UNLIMITED > >server = /var/qmail/bin/tcp-env > >server_args= -Rt0 /var/qmail/bin/relaylock > > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > > } > > > > SPAMDYKE.CONF > > log-level=2 > > local-domains-file=/var/qmail/control/rcpthosts > > max-recipients=30 > > idle-timeout-secs=300 > > graylist-dir=/var/qmail/spamdyke/graylist > > graylist-min-secs=120 > > graylist-max-secs=1814400 > > #greeting-delay-secs = 1 > > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > > # reject-empty-rdns > > # reject-unresolvable-rdns > > # reject-ip-in-cc-rdns > > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > > reject-missing-sender-mx > > check-dnsrbl=dul.dnsbl.sorbs.net > > #check-dnsrbl=sbl.spamhaus.org > > > > - Original Message > > From: Sam Clippinger <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > > To: spamdyke users <mailto:spamdyke-users@spamdyke.org>> > > Sent: Wednesday, November 14, 2007 12:13:44 AM > > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > > > Can you send more information about your setup? Could you send the > > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > > configuration file (if you have one)? > > > > -- Sam Clippinger > > > > david boh wrote: > > > I would like to report that v3.1.0 also suffer from the same issue as > > > described below. > > > > > > So now I am back to v3.0.1, I think many mail will be missing if I > > > continue to test. > > > > > > I believei it should be able to resolve quickly. > > > > > > - Original Message > > > From: david boh <[EMAIL PROTECTED] <mailto:[EM
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Hi David, Just a quick note from a fellow Plesk-user. I'm using spamdyke as well on several Plesk (Linux) versions and no complaints and no problems using webmail. I'm just wondering whether you've got localhost (127.0.0.1) on your whitelist inside Plesk? Settings can be found by logging in with admin credentials via: Server - Mail - tab White List Ton david boh schreef: Hi Sam, Test Step: 1. Re-install spamdyke 3.1.1 in both server 2. Place the spamdyke before relaylock pipe in xinetd.d 3. Restart xinetd 4. Repeat 2 and 3 of the other server. 5. Did the test, using webmail and send from server A to server B. Did the same on the other end. Both email did not leave the server just hang in qmail queue. So I revert both spamdyke to 3.0.1. (position of spamdyke still before relaylock) Force qmail to send qmail queue. All email goes without any problem. So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have problem with mail send via webmail. Through-out this test no configuration change for spamdyke.conf, whitelist, blacklist all configure file is the same. - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Thursday, November 15, 2007 2:09:29 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. I got a tip a while back from another Plesk user that you have to run spamdyke before relaylock to avoid these errors. So in your /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: server_args = -Rt0 /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true I need to update the documentation to include this. -- Sam Clippinger david boh wrote: > Sure my friend. > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > and duplicate/mirror setting) > > SMTP_PSA > { > socket_type = stream > protocol = tcp > wait = no > disable = no > user = root > instances = UNLIMITED > server = /var/qmail/bin/tcp-env > server_args = -Rt0 /var/qmail/bin/relaylock > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > } > > SPAMDYKE.CONF > log-level=2 > local-domains-file=/var/qmail/control/rcpthosts > max-recipients=30 > idle-timeout-secs=300 > graylist-dir=/var/qmail/spamdyke/graylist > graylist-min-secs=120 > graylist-max-secs=1814400 > #greeting-delay-secs = 1 > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > # reject-empty-rdns > # reject-unresolvable-rdns > # reject-ip-in-cc-rdns > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > reject-missing-sender-mx > check-dnsrbl=dul.dnsbl.sorbs.net > #check-dnsrbl=sbl.spamhaus.org > > - Original Message > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users <spamdyke-users@spamdyke.org> > Sent: Wednesday, November 14, 2007 12:13:44 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > Can you send more information about your setup? Could you send the > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > configuration file (if you have one)? > > -- Sam Clippinger > > david boh wrote: > > I would like to report that v3.1.0 also suffer from the same issue as > > described below. > > > > So now I am back to v3.0.1, I think many mail will be missing if I > > continue to test. > > > > I believei it should be able to resolve quickly. > > > > - Original Message > > From: david boh <[EMAIL PROTECTED] [EMAIL PROTECTED]>> > > To: spamdyke-users@spamdyke.org spamdyke-users@spamdyke.org> > > Sent: Tuesday, November 13, 2007 11:22:01 PM > > Subject: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > > > I have two server. One I install the latest spamdyke v3.1.1, let's call > > this server A and the other server B. > > > > Both have spamdyke v3.1.1, using plesk. But when I send email via > > web
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
There is not error for maillog, using log level-2. Will try the full log later thist week to confirm, if there is any issue. - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Friday, November 16, 2007 4:09:54 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. This is very strange. When the messages remain in the queue, are you seeing any errors in the qmail logs? Can you enable spamdyke's full logging on the receiving server and send me a log of a failed delivery? -- Sam Clippinger david boh wrote: > Hi Sam, > > Test Step: > 1. Re-install spamdyke 3.1.1 in both server > 2. Place the spamdyke before relaylock pipe in xinetd.d > 3. Restart xinetd > 4. Repeat 2 and 3 of the other server. > 5. Did the test, using webmail and send from server A to server B. Did > the same on the other end. > > Both email did not leave the server just hang in qmail queue. > > So I revert both spamdyke to 3.0.1. (position of spamdyke still before > relaylock) > Force qmail to send qmail queue. All email goes without any problem. > > So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have > problem with mail send via webmail. > > Through-out this test no configuration change for spamdyke.conf, > whitelist, blacklist all configure file is the same. > > > - Original Message > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Thursday, November 15, 2007 2:09:29 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > I got a tip a while back from another Plesk user that you have to run > spamdyke before relaylock to avoid these errors. So in your > /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: > server_args= -Rt0 /usr/local/bin/spamdyke --config-file > /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > > I need to update the documentation to include this. > > -- Sam Clippinger > > david boh wrote: > > Sure my friend. > > > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > > and duplicate/mirror setting) > > > > SMTP_PSA > > { > >socket_type= stream > >protocol= tcp > >wait= no > >disable= no > >user= root > >instances = UNLIMITED > >server = /var/qmail/bin/tcp-env > >server_args= -Rt0 /var/qmail/bin/relaylock > > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > > } > > > > SPAMDYKE.CONF > > log-level=2 > > local-domains-file=/var/qmail/control/rcpthosts > > max-recipients=30 > > idle-timeout-secs=300 > > graylist-dir=/var/qmail/spamdyke/graylist > > graylist-min-secs=120 > > graylist-max-secs=1814400 > > #greeting-delay-secs = 1 > > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > > # reject-empty-rdns > > # reject-unresolvable-rdns > > # reject-ip-in-cc-rdns > > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > > reject-missing-sender-mx > > check-dnsrbl=dul.dnsbl.sorbs.net > > #check-dnsrbl=sbl.spamhaus.org > > > > - Original Message > > From: Sam Clippinger <[EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>> > > To: spamdyke users <mailto:spamdyke-users@spamdyke.org>> > > Sent: Wednesday, November 14, 2007 12:13:44 AM > > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > > > Can you send more information about your setup? Could you send the > > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > > configuration file (if you have one)? > > > > -- Sam Clippinger > > > > david boh wrote: > > > I would like to report that v3.1.0 also suffer from the same issue as > > > described below. >
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Hi Ton, Thanks for the tip. Have check both Plesk and spamdyke whitelist, 127.0.0.1 is included. If you read my test step properly. Without any changes to the configuration (Linux, Plesk, spamdyke config), spamdyke 3.0.1 will just work. When replace with spamdyke 3.1.1, it just fail. It looks like a straight forward failure. But it somehow do not have any error message at spamdyke level-2 log in maillog. - Original Message From: Ton van Rosmalen <[EMAIL PROTECTED]> To: spamdyke users Sent: Friday, November 16, 2007 12:30:17 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. Hi David, Just a quick note from a fellow Plesk-user. I'm using spamdyke as well on several Plesk (Linux) versions and no complaints and no problems using webmail. I'm just wondering whether you've got localhost (127.0.0.1) on your whitelist inside Plesk? Settings can be found by logging in with admin credentials via: Server - Mail - tab White List Ton david boh schreef: Hi Sam, Test Step: 1. Re-install spamdyke 3.1.1 in both server 2. Place the spamdyke before relaylock pipe in xinetd.d 3. Restart xinetd 4. Repeat 2 and 3 of the other server. 5. Did the test, using webmail and send from server A to server B. Did the same on the other end. Both email did not leave the server just hang in qmail queue. So I revert both spamdyke to 3.0.1. (position of spamdyke still before relaylock) Force qmail to send qmail queue. All email goes without any problem. So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have problem with mail send via webmail. Through-out this test no configuration change for spamdyke.conf, whitelist, blacklist all configure file is the same. - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Thursday, November 15, 2007 2:09:29 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. I got a tip a while back from another Plesk user that you have to run spamdyke before relaylock to avoid these errors. So in your /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: server_args= -Rt0 /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true I need to update the documentation to include this. -- Sam Clippinger david boh wrote: > Sure my friend. > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > and duplicate/mirror setting) > > SMTP_PSA > { >socket_type= stream >protocol= tcp >wait= no >disable= no >user= root >instances = UNLIMITED >server = /var/qmail/bin/tcp-env >server_args= -Rt0 /var/qmail/bin/relaylock > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > } > > SPAMDYKE.CONF > log-level=2 > local-domains-file=/var/qmail/control/rcpthosts > max-recipients=30 > idle-timeout-secs=300 > graylist-dir=/var/qmail/spamdyke/graylist > graylist-min-secs=120 > graylist-max-secs=1814400 > #greeting-delay-secs = 1 > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > # reject-empty-rdns > # reject-unresolvable-rdns > # reject-ip-in-cc-rdns > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > reject-missing-sender-mx > check-dnsrbl=dul.dnsbl.sorbs.net > #check-dnsrbl=sbl.spamhaus.org > > - Original Message ---- > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Wednesday, November 14, 2007 12:13:44 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > Can you send more information about your setup? Could you send the > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > configuration file (if you have one)? > > -- Sam Clippinger > > david boh wrote: > > I would like to report that v3.1.0 also suffer from the same issue as > > described below. > > > > So now I am back to v3.0.1, I think many
Re: [spamdyke-users] Problem in v3.1.1 make it un-usable.
Hi i have followed this how to but i have a problem, spamdyke won't start. Can anyone help me ? Thanks Nightduke david boh <[EMAIL PROTECTED]> escribió: Hi Ton, Thanks for the tip. Have check both Plesk and spamdyke whitelist, 127.0.0.1 is included. If you read my test step properly. Without any changes to the configuration (Linux, Plesk, spamdyke config), spamdyke 3.0.1 will just work. When replace with spamdyke 3.1.1, it just fail. It looks like a straight forward failure. But it somehow do not have any error message at spamdyke level-2 log in maillog. - Original Message From: Ton van Rosmalen <[EMAIL PROTECTED]> To: spamdyke users Sent: Friday, November 16, 2007 12:30:17 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. Hi David, Just a quick note from a fellow Plesk-user. I'm using spamdyke as well on several Plesk (Linux) versions and no complaints and no problems using webmail. I'm just wondering whether you've got localhost (127.0.0.1) on your whitelist inside Plesk? Settings can be found by logging in with admin credentials via: Server - Mail - tab White List Ton david boh schreef: Hi Sam, Test Step: 1. Re-install spamdyke 3.1.1 in both server 2. Place the spamdyke before relaylock pipe in xinetd.d 3. Restart xinetd 4. Repeat 2 and 3 of the other server. 5. Did the test, using webmail and send from server A to server B. Did the same on the other end. Both email did not leave the server just hang in qmail queue. So I revert both spamdyke to 3.0.1. (position of spamdyke still before relaylock) Force qmail to send qmail queue. All email goes without any problem. So pipe spamdyke before relaylock works. But spamdyke 3.1.1 still have problem with mail send via webmail. Through-out this test no configuration change for spamdyke.conf, whitelist, blacklist all configure file is the same. - Original Message From: Sam Clippinger <[EMAIL PROTECTED]> To: spamdyke users Sent: Thursday, November 15, 2007 2:09:29 AM Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. I got a tip a while back from another Plesk user that you have to run spamdyke before relaylock to avoid these errors. So in your /etc/xinetd.d/smtp_psa file, try changing the "server_args" line to: server_args= -Rt0 /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf /var/qmail/bin/relaylock /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true /var/qmail/bin/cmd5checkpw /var/qmail/bin/true I need to update the documentation to include this. -- Sam Clippinger david boh wrote: > Sure my friend. > > Both server has the same smtp_psa and configure ( both server have 3.0.1 > and duplicate/mirror setting) > > SMTP_PSA > { >socket_type= stream >protocol= tcp >wait= no >disable= no >user= root >instances = UNLIMITED >server = /var/qmail/bin/tcp-env >server_args= -Rt0 /var/qmail/bin/relaylock > /usr/local/bin/spamdyke --config-file /var/qmail/spamdyke/spamdyke.conf > /var/qmail/bin/qmail-smtpd /var/qmail/bin/smtp_auth /var/qmail/bin/true > /var/qmail/bin/cmd5checkpw /var/qmail/bin/true > } > > SPAMDYKE.CONF > log-level=2 > local-domains-file=/var/qmail/control/rcpthosts > max-recipients=30 > idle-timeout-secs=300 > graylist-dir=/var/qmail/spamdyke/graylist > graylist-min-secs=120 > graylist-max-secs=1814400 > #greeting-delay-secs = 1 > sender-blacklist-file=/var/qmail/spamdyke/blacklist_senders > recipient-blacklist-file=/var/qmail/spamdyke/blacklist_recipients > # ip-in-rdns-keyword-file=/var/qmail/spamdyke/blacklist_keywords > ip-blacklist-file=/var/qmail/spamdyke/blacklist_ip > # rdns-blacklist-dir=/var/qmail/spamdyke/blacklist_rdns.d > sender-whitelist-file=/var/qmail/spamdyke/whitelist_recipients > # reject-empty-rdns > # reject-unresolvable-rdns > # reject-ip-in-cc-rdns > # rdns-whitelist-file=/var/qmail/spamdyke/whitelist_rdns > ip-whitelist-file=/var/qmail/spamdyke/whitelist_ip > reject-missing-sender-mx > check-dnsrbl=dul.dnsbl.sorbs.net > #check-dnsrbl=sbl.spamhaus.org > > ----- Original Message ---- > From: Sam Clippinger <[EMAIL PROTECTED]> > To: spamdyke users > Sent: Wednesday, November 14, 2007 12:13:44 AM > Subject: Re: [spamdyke-users] Problem in v3.1.1 make it un-usable. > > Can you send more information about your setup? Could you send the > contents of your /etc/xinetd.d/smtp_psa file and your spamdyke > configuration file (if you have one)? > > -- Sam Clippinger > > david boh wrote: > > I would like to report that v3.1.0 also suffer from the same issue as > > described below