Re: [U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-28 Thread B, Ravi
Drop this send wrong version

Regards
Ravi

-Original Message-
From: B, Ravi 
Sent: Wednesday, September 28, 2016 2:43 PM
To: u-boot@lists.denx.de
Cc: tr...@konsulko.com; s...@chromium.org; jh80.ch...@samsung.com; Vutla, 
Lokesh; B, Ravi
Subject: [PATCH] spl: saveenv: adding saveenv support in SPL

By default saveenv option is not supported for SPL. This patch enable the 
support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default the saveenv 
option is not provided in SPL, but some boards need this support in 'Falcon' 
boot, where SPL need to boot from different images based on environment 
variable set by OS. For example OS may set "reboot_image" environment variable 
to "recovery" inorder to boot recovery image by SPL. The SPL read 
"reboot_image" and act accordingly and change the reboot_image to default mode 
using setenv and save the environemnt.

Signed-off-by: Ravi Babu 
Reviewed-by: Simon Glass 
---
 common/spl/Kconfig| 13 +
 drivers/mmc/Makefile  |  1 +
 drivers/mmc/mmc_private.h |  3 +--
 lib/Makefile  |  1 +
 lib/hashtable.c   |  2 +-
 5 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 2a8ddbc..605cf66 
100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
  starting U-Boot first. Enabling this option will make getenv()
  and setenv() available in SPL.
 
+config SPL_SAVEENV
+   bool "Support save environment"
+   depends on SPL && SPL_ENV_SUPPORT
+   help
+ Enable save environment support in SPL after setenv. By default
+ the saveenv option is not provided in SPL, but some boards need
+ this support in 'Falcon' boot, where SPL need to boot from
+ different images based on environment variable set by OS. For
+ example OS may set "reboot_image" environment variable to
+ "recovery" inorder to boot recovery image by SPL. The SPL read
+ "reboot_image" and act accordingly and change the reboot_image
+ to default mode using setenv and save the environemnt.
+
 config SPL_ETH_SUPPORT
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 18351fb..d850758 
100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+obj-$(CONFIG_SPL_SAVEENV) += mmc_write.o
 else
 obj-$(CONFIG_GENERIC_MMC) += mmc_write.o  endif diff --git 
a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h index 49ec022..e0c9849 
100644
--- a/drivers/mmc/mmc_private.h
+++ b/drivers/mmc/mmc_private.h
@@ -28,8 +28,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 
lbaint_t blkcnt,
void *dst);
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start,
 lbaint_t blkcnt);
 
diff --git a/lib/Makefile b/lib/Makefile index c81bfeb..e3383f4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_$(SPL_)RSA) += rsa/
 obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
 obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
 
+obj-$(CONFIG_SPL_SAVEENV) += qsort.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/  ifneq 
($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy)
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o diff --git 
a/lib/hashtable.c b/lib/hashtable.c index 4e52b36..07c437c 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -477,11 +477,11 @@ int hdelete_r(const char *key, struct hsearch_data *htab, 
int flag)
return 1;
 }
 
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 /*
  * hexport()
  */
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Export the data stored in the hash table in linearized form.
  *
--
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-28 Thread Ravi Babu
By default saveenv option is not supported for SPL. This patch
enable the support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
to default mode using setenv and save the environemnt.

Signed-off-by: Ravi Babu 
Reviewed-by: Simon Glass 
---
 common/spl/Kconfig| 13 +
 drivers/mmc/Makefile  |  1 +
 drivers/mmc/mmc_private.h |  3 +--
 lib/Makefile  |  1 +
 lib/hashtable.c   |  2 +-
 5 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 2a8ddbc..605cf66 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
  starting U-Boot first. Enabling this option will make getenv()
  and setenv() available in SPL.
 
+config SPL_SAVEENV
+   bool "Support save environment"
+   depends on SPL && SPL_ENV_SUPPORT
+   help
+ Enable save environment support in SPL after setenv. By default
+ the saveenv option is not provided in SPL, but some boards need
+ this support in 'Falcon' boot, where SPL need to boot from
+ different images based on environment variable set by OS. For
+ example OS may set "reboot_image" environment variable to
+ "recovery" inorder to boot recovery image by SPL. The SPL read
+ "reboot_image" and act accordingly and change the reboot_image
+ to default mode using setenv and save the environemnt.
+
 config SPL_ETH_SUPPORT
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 18351fb..d850758 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+obj-$(CONFIG_SPL_SAVEENV) += mmc_write.o
 else
 obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
 endif
diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h
index 49ec022..e0c9849 100644
--- a/drivers/mmc/mmc_private.h
+++ b/drivers/mmc/mmc_private.h
@@ -28,8 +28,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 
lbaint_t blkcnt,
void *dst);
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start,
 lbaint_t blkcnt);
 
diff --git a/lib/Makefile b/lib/Makefile
index c81bfeb..e3383f4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_$(SPL_)RSA) += rsa/
 obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
 obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
 
+obj-$(CONFIG_SPL_SAVEENV) += qsort.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/
 ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy)
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 4e52b36..07c437c 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -477,11 +477,11 @@ int hdelete_r(const char *key, struct hsearch_data *htab, 
int flag)
return 1;
 }
 
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 /*
  * hexport()
  */
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Export the data stored in the hash table in linearized form.
  *
-- 
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


Re: [U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-27 Thread Tom Rini
On Tue, Sep 27, 2016 at 12:15:08PM +0530, Ravi Babu wrote:

> By default saveenv option is not supported for SPL. This patch
> enable the support for save environment variable for SPL build.
> 
> Enable save environment support in SPL after setenv. By default
> the saveenv option is not provided in SPL, but some boards need
> this support in 'Falcon' boot, where SPL need to boot from
> different images based on environment variable set by OS. For
> example OS may set "reboot_image" environment variable to
> "recovery" inorder to boot recovery image by SPL. The SPL read
> "reboot_image" and act accordingly and change the reboot_image
> to default mode using setenv and save the environemnt.
[snip]
> diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h
> index 49ec022..e0c9849 100644
> --- a/drivers/mmc/mmc_private.h
> +++ b/drivers/mmc/mmc_private.h
> @@ -28,8 +28,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 
> lbaint_t blkcnt,
>   void *dst);
>  #endif
>  
> -#ifndef CONFIG_SPL_BUILD
> -
> +#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
>  unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start,
>lbaint_t blkcnt);

The comments in this area are now wrong after this patch so please
update them as part of the patch.  Thanks!

-- 
Tom


signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-26 Thread Ravi Babu
By default saveenv option is not supported for SPL. This patch
enable the support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
to default mode using setenv and save the environemnt.

Signed-off-by: Ravi Babu 
Reviewed-by: Simon Glass 
---
 common/spl/Kconfig| 13 +
 drivers/mmc/Makefile  |  1 +
 drivers/mmc/mmc_private.h |  3 +--
 lib/Makefile  |  1 +
 lib/hashtable.c   |  2 +-
 5 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 2a8ddbc..605cf66 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
  starting U-Boot first. Enabling this option will make getenv()
  and setenv() available in SPL.
 
+config SPL_SAVEENV
+   bool "Support save environment"
+   depends on SPL && SPL_ENV_SUPPORT
+   help
+ Enable save environment support in SPL after setenv. By default
+ the saveenv option is not provided in SPL, but some boards need
+ this support in 'Falcon' boot, where SPL need to boot from
+ different images based on environment variable set by OS. For
+ example OS may set "reboot_image" environment variable to
+ "recovery" inorder to boot recovery image by SPL. The SPL read
+ "reboot_image" and act accordingly and change the reboot_image
+ to default mode using setenv and save the environemnt.
+
 config SPL_ETH_SUPPORT
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 18351fb..d850758 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+obj-$(CONFIG_SPL_SAVEENV) += mmc_write.o
 else
 obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
 endif
diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h
index 49ec022..e0c9849 100644
--- a/drivers/mmc/mmc_private.h
+++ b/drivers/mmc/mmc_private.h
@@ -28,8 +28,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 
lbaint_t blkcnt,
void *dst);
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start,
 lbaint_t blkcnt);
 
diff --git a/lib/Makefile b/lib/Makefile
index c81bfeb..e3383f4 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_$(SPL_)RSA) += rsa/
 obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
 obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
 
+obj-$(CONFIG_SPL_SAVEENV) += qsort.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/
 ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy)
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 4e52b36..07c437c 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -477,11 +477,11 @@ int hdelete_r(const char *key, struct hsearch_data *htab, 
int flag)
return 1;
 }
 
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV))
 /*
  * hexport()
  */
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Export the data stored in the hash table in linearized form.
  *
-- 
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


Re: [U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-26 Thread B, Ravi
Hi Simon

>On 26 September 2016 at 06:56, Ravi Babu  wrote:
>> By default saveenv option is not supported for SPL. This patch enable 
>> the support for save environment variable for SPL build.
>>
>> Enable save environment support in SPL after setenv. By default the 
>> saveenv option is not provided in SPL, but some boards need this 
>> support in 'Falcon' boot, where SPL need to boot from different images 
>> based on environment variable set by OS. For example OS may set 
>> "reboot_image" environment variable to "recovery" inorder to boot 
>> recovery image by SPL. The SPL read "reboot_image" and act accordingly 
>> and change the reboot_image to default mode using setenv and save the 
>> environemnt.
>>
>> Signed-off-by: Ravi Babu 
>> ---
>>  common/spl/Kconfig| 13 +
>>  drivers/mmc/Makefile  |  1 +
>>  drivers/mmc/mmc_private.h |  3 +--
>>  lib/Makefile  |  1 +
>>  lib/hashtable.c   |  2 +-
>>  5 files changed, 17 insertions(+), 3 deletions(-)
>>
>> diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 
>> 2a8ddbc..0daa835 100644
>> --- a/common/spl/Kconfig
>> +++ b/common/spl/Kconfig
>> @@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
>>   starting U-Boot first. Enabling this option will make getenv()
>>   and setenv() available in SPL.
>>
>> +config SPL_SAVEENV_SUPPORT
>> +   bool "Support save environment"
>> +   depends on SPL && SPL_ENV_SUPPORT
>> +   help
>> + Enable save environment support in SPL after setenv. By default
>> + the saveenv option is not provided in SPL, but some boards need
>> + this support in 'Falcon' boot, where SPL need to boot from
>> + different images based on environment variable set by OS. For
>> + example OS may set "reboot_image" environment variable to
>> + "recovery" inorder to boot recovery image by SPL. The SPL read
>> + "reboot_image" and act accordingly and change the reboot_image
>> + to default mode using setenv and save the environemnt.
>> +

>Reviewed-by: Simon Glass 

>But I wonder if we could use SPL_SAVEENV, and drop the SUPPORT? 

Ok,  will drop SUPPORT and use SPL_SAVEENV.

> For U-Boot proper we use CONFIG_CMD_SAVEENV which is inconsistent - I think 
> we should really have a CONFIG_SAVEENV separate from the command.
I agree. 

Thanks.

Regards
Ravi
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


Re: [U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-26 Thread Simon Glass
Hi Ravi,

On 26 September 2016 at 06:56, Ravi Babu  wrote:
> By default saveenv option is not supported for SPL. This patch
> enable the support for save environment variable for SPL build.
>
> Enable save environment support in SPL after setenv. By default
> the saveenv option is not provided in SPL, but some boards need
> this support in 'Falcon' boot, where SPL need to boot from
> different images based on environment variable set by OS. For
> example OS may set "reboot_image" environment variable to
> "recovery" inorder to boot recovery image by SPL. The SPL read
> "reboot_image" and act accordingly and change the reboot_image
> to default mode using setenv and save the environemnt.
>
> Signed-off-by: Ravi Babu 
> ---
>  common/spl/Kconfig| 13 +
>  drivers/mmc/Makefile  |  1 +
>  drivers/mmc/mmc_private.h |  3 +--
>  lib/Makefile  |  1 +
>  lib/hashtable.c   |  2 +-
>  5 files changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/common/spl/Kconfig b/common/spl/Kconfig
> index 2a8ddbc..0daa835 100644
> --- a/common/spl/Kconfig
> +++ b/common/spl/Kconfig
> @@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
>   starting U-Boot first. Enabling this option will make getenv()
>   and setenv() available in SPL.
>
> +config SPL_SAVEENV_SUPPORT
> +   bool "Support save environment"
> +   depends on SPL && SPL_ENV_SUPPORT
> +   help
> + Enable save environment support in SPL after setenv. By default
> + the saveenv option is not provided in SPL, but some boards need
> + this support in 'Falcon' boot, where SPL need to boot from
> + different images based on environment variable set by OS. For
> + example OS may set "reboot_image" environment variable to
> + "recovery" inorder to boot recovery image by SPL. The SPL read
> + "reboot_image" and act accordingly and change the reboot_image
> + to default mode using setenv and save the environemnt.
> +

Reviewed-by: Simon Glass 

But I wonder if we could use SPL_SAVEENV, and drop the SUPPORT? For
U-Boot proper we use CONFIG_CMD_SAVEENV which is inconsistent - I
think we should really have a CONFIG_SAVEENV separate from the
command.

Regards,
Simon
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot


[U-Boot] [PATCH] spl: saveenv: adding saveenv support in SPL

2016-09-26 Thread Ravi Babu
By default saveenv option is not supported for SPL. This patch
enable the support for save environment variable for SPL build.

Enable save environment support in SPL after setenv. By default
the saveenv option is not provided in SPL, but some boards need
this support in 'Falcon' boot, where SPL need to boot from
different images based on environment variable set by OS. For
example OS may set "reboot_image" environment variable to
"recovery" inorder to boot recovery image by SPL. The SPL read
"reboot_image" and act accordingly and change the reboot_image
to default mode using setenv and save the environemnt.

Signed-off-by: Ravi Babu 
---
 common/spl/Kconfig| 13 +
 drivers/mmc/Makefile  |  1 +
 drivers/mmc/mmc_private.h |  3 +--
 lib/Makefile  |  1 +
 lib/hashtable.c   |  2 +-
 5 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 2a8ddbc..0daa835 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -163,6 +163,19 @@ config SPL_ENV_SUPPORT
  starting U-Boot first. Enabling this option will make getenv()
  and setenv() available in SPL.
 
+config SPL_SAVEENV_SUPPORT
+   bool "Support save environment"
+   depends on SPL && SPL_ENV_SUPPORT
+   help
+ Enable save environment support in SPL after setenv. By default
+ the saveenv option is not provided in SPL, but some boards need
+ this support in 'Falcon' boot, where SPL need to boot from
+ different images based on environment variable set by OS. For
+ example OS may set "reboot_image" environment variable to
+ "recovery" inorder to boot recovery image by SPL. The SPL read
+ "reboot_image" and act accordingly and change the reboot_image
+ to default mode using setenv and save the environemnt.
+
 config SPL_ETH_SUPPORT
bool "Support Ethernet"
depends on SPL_ENV_SUPPORT
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 18351fb..cedce0a 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -60,6 +60,7 @@ obj-$(CONFIG_ROCKCHIP_SDHCI) += rockchip_sdhci.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
+obj-$(CONFIG_SPL_SAVEENV_SUPPORT) += mmc_write.o
 else
 obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
 endif
diff --git a/drivers/mmc/mmc_private.h b/drivers/mmc/mmc_private.h
index 49ec022..1a881ad 100644
--- a/drivers/mmc/mmc_private.h
+++ b/drivers/mmc/mmc_private.h
@@ -28,8 +28,7 @@ ulong mmc_bread(struct blk_desc *block_dev, lbaint_t start, 
lbaint_t blkcnt,
void *dst);
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV_SUPPORT))
 unsigned long mmc_berase(struct blk_desc *block_dev, lbaint_t start,
 lbaint_t blkcnt);
 
diff --git a/lib/Makefile b/lib/Makefile
index c81bfeb..1590704 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_$(SPL_)RSA) += rsa/
 obj-$(CONFIG_$(SPL_)SHA1) += sha1.o
 obj-$(CONFIG_$(SPL_)SHA256) += sha256.o
 
+obj-$(CONFIG_SPL_SAVEENV_SUPPORT) += qsort.o
 obj-$(CONFIG_$(SPL_)OF_LIBFDT) += libfdt/
 ifneq ($(CONFIG_SPL_BUILD)$(CONFIG_SPL_OF_PLATDATA),yy)
 obj-$(CONFIG_$(SPL_)OF_CONTROL) += fdtdec_common.o
diff --git a/lib/hashtable.c b/lib/hashtable.c
index 4e52b36..bdb54ca 100644
--- a/lib/hashtable.c
+++ b/lib/hashtable.c
@@ -477,11 +477,11 @@ int hdelete_r(const char *key, struct hsearch_data *htab, 
int flag)
return 1;
 }
 
+#if !(defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SAVEENV_SUPPORT))
 /*
  * hexport()
  */
 
-#ifndef CONFIG_SPL_BUILD
 /*
  * Export the data stored in the hash table in linearized form.
  *
-- 
1.9.1

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot