Hummingboard dual, dual-lite and solo are now supported via SPL mechanism.
Remove the previous hummingboard support, which does not use SPL and supported
only the solo variant.
Signed-off-by: Fabio Estevam fabio.este...@freescale.com
---
arch/arm/Kconfig | 5 -
board/solidrun/hummingboard/Kconfig| 15 --
board/solidrun/hummingboard/MAINTAINERS| 6 -
board/solidrun/hummingboard/Makefile | 9 --
board/solidrun/hummingboard/README | 40 --
board/solidrun/hummingboard/hummingboard.c | 182 ---
board/solidrun/hummingboard/solo.cfg | 25
configs/hummingboard_solo_defconfig| 3 -
include/configs/hummingboard.h | 224 -
9 files changed, 509 deletions(-)
delete mode 100644 board/solidrun/hummingboard/Kconfig
delete mode 100644 board/solidrun/hummingboard/MAINTAINERS
delete mode 100644 board/solidrun/hummingboard/Makefile
delete mode 100644 board/solidrun/hummingboard/README
delete mode 100644 board/solidrun/hummingboard/hummingboard.c
delete mode 100644 board/solidrun/hummingboard/solo.cfg
delete mode 100644 configs/hummingboard_solo_defconfig
delete mode 100644 include/configs/hummingboard.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7c383cb..b97f72b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -542,10 +542,6 @@ config TARGET_GW_VENTANA
select CPU_V7
select SUPPORT_SPL
-config TARGET_HUMMINGBOARD
- bool Support hummingboard
- select CPU_V7
-
config TARGET_KOSAGI_NOVENA
bool Support Kosagi Novena
select CPU_V7
@@ -862,7 +858,6 @@ source board/siemens/pxm2/Kconfig
source board/siemens/rut/Kconfig
source board/silica/pengwyn/Kconfig
source board/solidrun/mx6cuboxi/Kconfig
-source board/solidrun/hummingboard/Kconfig
source board/spear/spear300/Kconfig
source board/spear/spear310/Kconfig
source board/spear/spear320/Kconfig
diff --git a/board/solidrun/hummingboard/Kconfig
b/board/solidrun/hummingboard/Kconfig
deleted file mode 100644
index 36b7904..000
--- a/board/solidrun/hummingboard/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_HUMMINGBOARD
-
-config SYS_BOARD
- default hummingboard
-
-config SYS_VENDOR
- default solidrun
-
-config SYS_SOC
- default mx6
-
-config SYS_CONFIG_NAME
- default hummingboard
-
-endif
diff --git a/board/solidrun/hummingboard/MAINTAINERS
b/board/solidrun/hummingboard/MAINTAINERS
deleted file mode 100644
index c0c062a..000
--- a/board/solidrun/hummingboard/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HUMMINGBOARD BOARD
-M: Jon Nettleton jon.nettle...@gmail.com
-S: Maintained
-F: board/solidrun/hummingboard/
-F: include/configs/hummingboard.h
-F: configs/hummingboard_solo_defconfig
diff --git a/board/solidrun/hummingboard/Makefile
b/board/solidrun/hummingboard/Makefile
deleted file mode 100644
index 042a2f0..000
--- a/board/solidrun/hummingboard/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2013 Freescale Semiconductor, Inc.
-# Copyright (C) 2013, Boundary Devices i...@boundarydevices.com
-# Copyright (C) 2013, Jon Nettleton jon.nettle...@gmail.com
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := hummingboard.o
diff --git a/board/solidrun/hummingboard/README
b/board/solidrun/hummingboard/README
deleted file mode 100644
index cfd62d4..000
--- a/board/solidrun/hummingboard/README
+++ /dev/null
@@ -1,40 +0,0 @@
-U-Boot for SolidRun Hummingboard
-
-
-This file contains information for the port of U-Boot to the Hummingboard.
-
-For more details about Hummingboard, please refer to:
-http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
-
-(Carrier-One was the previous name of Hummingboard).
-
-Building U-boot for Hummingboard
-
-
-To build U-Boot for the Hummingboard Solo version:
-
-$ make hummingboard_solo_config
-$ make
-
-Flashing U-boot into the SD card
-
-
-- After the 'make' command completes, the generated 'u-boot.imx' binary must be
-flashed into the SD card:
-
-$ sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=1k seek=1; sync
-
-(Note - the SD card node may vary, so adjust this as needed).
-
-Also, a more detailed explanation on how to format the SD card is available
-at doc/README.imximage.
-
-- Insert the micro SD card into the slot located in the bottom of the board
-
-- Connect a 3.3V USB to serial converter cable to the host PC. The MX6 UART
-signals are available in the 26 pin connector as shown at:
-http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware
-(Check for 26 pin header layout).
-
-- Power up the board via USB cable (CON201) and U-boot messages will appear in
-the serial console.
diff --git a/board/solidrun/hummingboard/hummingboard.c
b/board/solidrun/hummingboard/hummingboard.c
deleted file mode 100644
index 52c384b..000
---