[U-Boot] U-Boot Hanging
Hi, I have compiled u-boot (for nand flash, using canyonlands_nand_config) for the canyonlands board having a PPC460Ex. I have flashed the u-boot-nand.bin to the NAND flash. When I boot from the NAND flash the u-boot starts giving outputs onto minicom, but it hangs after just a few statements. U-Boot 1.3.4-00380-g302e52e (Sep 8 2008 - 15:37:41) CPU: AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter disabled 32 kB I-Cache 32 kB D-Cache Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 16 I2C: ready DTT: 1 is 47 C DRAM: 512 MB Has anybody faced this issue? Regards, Afzal Nadirshah http://www.mindtree.com/email/disclaimer.html ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Re: [U-Boot] U-Boot Hanging
Hi Afzal: Sounds like an issue where the fixed DRAM init did not work as it should. Try to pull the latest version of U-Boot, see if that helps. You may want to pull The latest from Stefan's tree as well. Feng Kan AMCC Software -Original Message- From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Afzal Nadirshah Sent: Tuesday, February 03, 2009 2:02 AM To: u-boot@lists.denx.de Subject: [U-Boot] U-Boot Hanging Hi, I have compiled u-boot (for nand flash, using canyonlands_nand_config) for the canyonlands board having a PPC460Ex. I have flashed the u-boot-nand.bin to the NAND flash. When I boot from the NAND flash the u-boot starts giving outputs onto minicom, but it hangs after just a few statements. U-Boot 1.3.4-00380-g302e52e (Sep 8 2008 - 15:37:41) CPU: AMCC PowerPC 460EX Rev. A at 600 MHz (PLB=200, OPB=100, EBC=100 MHz) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter disabled 32 kB I-Cache 32 kB D-Cache Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 16 I2C: ready DTT: 1 is 47 C DRAM: 512 MB Has anybody faced this issue? Regards, Afzal Nadirshah http://www.mindtree.com/email/disclaimer.html ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] U-Boot hanging for devkit8000 by TIMLL
Hello, I have a devkit8000 from TIMLL, I am trying to use u-boot latest code from your git repository. But it is hanging at the following place. The enabled debug logs are as below. U-Boot 2011.09-rc1-00023-g7aabad2-dirty (Sep 21 2011 - 20:05:22) U-Boot code: 80008000 -> 8004921C BSS: -> 8007E668 OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 DevKit8000 + LPDDR/NAND I2C: ready monitor len: 00076668 ramsize: 0800 TLB table at: 87ff Top of RAM usable for U-Boot at: 87ff Reserving 473k for U-Boot at: 87f79000 Reserving 256k for malloc() at: 87f39000 Reserving 32 Bytes for Board Info at: 87f38fe0 Reserving 120 Bytes for Global Data at: 87f38f68 New Stack Pointer is: 87f38f58 RAM Configuration: Bank #0: 8000 128 Can anybody help me coming out of this? Thanks & Regards Bhimsen Kulkarni Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot