[Bug 1364111] [NEW] Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
Public bug reported: If the Num lock key is toggled rapidly, there's a chance that mate-settings-daemon will go into runaway CPU usage (causing Xorg to also appear to be in runaway CPU usage), and the Num lock LED will flash/blink erratically (randomly--this is not the steady 2Hz blinking when a kernel panic occurs). By killing mate-settings-daemon, the system can recover; mate-settings-daemon respawns, Xorg goes back to normal CPU usage, and the Num lock LED is stable. This behavior is present on an up-to-date installation of Ubuntu MATE 14.10 (beta 1)as well as the LiveCD. This seems to apply only to hardware Num lock toggling, as rapid toggling in onboard does not seem to cause the issue. The same does not appear to happen to the caps lock key. The state of num lock is indeed indeterminate when this occurs (e.g. numeric 4 will vary between typing '4' and left-arrow). This appears to be directly related to prior CPU availability, as it is more of a problem on older hardware (e.g. with 2001 Pentium M) where it can be triggered on an idle system, and more difficult to duplicate on later hardware (e.g. with a dual-core processor) unless the CPUs are busy (e.g. other runaway processes). Only tested on 32-bit; will upload apport info. ** Affects: ubuntu-mate Importance: Undecided Status: New ** Affects: mate-settings-daemon (Ubuntu) Importance: Undecided Status: New ** Also affects: mate-settings-daemon (Ubuntu) Importance: Undecided Status: New ** Description changed: If the Num lock key is toggled rapidly, there's a chance that mate-settings-daemon will go into runaway CPU usage (causing Xorg to also appear to be in runaway CPU usage), and the Num lock LED will flash/blink erratically (randomly--this is not the steady 2Hz blinking when a kernel panic occurs). By killing mate-settings-daemon, the system can recover; mate-settings-daemon respawns, Xorg goes back to normal CPU usage, and the Num lock LED is stable. - This behavior is present on an up-to-date installation as well as the LiveCD. - This seems to apply only to hardware Num lock toggling, as rapid toggling in onboard does not seem to cause the issue. The same does not appear to happen to the caps lock key. The state of num lock is indeed indeterminate when this occurs (e.g. numeric 4 will vary between typing '4' and left-arrow). + This behavior is present on an up-to-date installation of Ubuntu MATE 14.10 (beta 1)as well as the LiveCD. + This seems to apply only to hardware Num lock toggling, as rapid toggling in onboard does not seem to cause the issue. The same does not appear to happen to the caps lock key. The state of num lock is indeed indeterminate when this occurs (e.g. numeric 4 will vary between typing '4' and left-arrow). This appears to be directly related to prior CPU availability, as it is more of a problem on older hardware (e.g. with 2001 Pentium M) where it can be triggered on an idle system, and more difficult to duplicate on later hardware (e.g. with a dual-core processor) unless the CPUs are busy (e.g. other runaway processes). Only tested on 32-bit; will upload apport info. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
See also https://github.com/mate-desktop/mate-settings-daemon/issues/57 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
Possibly related to, if not duplicate of, bug 969359 (for gnome- settings-daemon)? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
apport information ** Tags added: apport-collected utopic ** Description changed: If the Num lock key is toggled rapidly, there's a chance that mate-settings-daemon will go into runaway CPU usage (causing Xorg to also appear to be in runaway CPU usage), and the Num lock LED will flash/blink erratically (randomly--this is not the steady 2Hz blinking when a kernel panic occurs). By killing mate-settings-daemon, the system can recover; mate-settings-daemon respawns, Xorg goes back to normal CPU usage, and the Num lock LED is stable. This behavior is present on an up-to-date installation of Ubuntu MATE 14.10 (beta 1)as well as the LiveCD. This seems to apply only to hardware Num lock toggling, as rapid toggling in onboard does not seem to cause the issue. The same does not appear to happen to the caps lock key. The state of num lock is indeed indeterminate when this occurs (e.g. numeric 4 will vary between typing '4' and left-arrow). This appears to be directly related to prior CPU availability, as it is more of a problem on older hardware (e.g. with 2001 Pentium M) where it can be triggered on an idle system, and more difficult to duplicate on later hardware (e.g. with a dual-core processor) unless the CPUs are busy (e.g. other runaway processes). Only tested on 32-bit; will upload apport info. + --- + ApportVersion: 2.14.7-0ubuntu1 + Architecture: i386 + DistroRelease: Ubuntu 14.10 + InstallationDate: Installed on 2014-08-31 (1 days ago) + InstallationMedia: Ubuntu MATE 14.10 "Utopic Unicorn" - beta1 i386 (20140828) + Package: mate-settings-daemon 1.8.1-2 + PackageArchitecture: all + ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 + Tags: utopic + Uname: Linux 3.16.0-11-generic i686 + UpgradeStatus: No upgrade log present (probably fresh install) + UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo + _MarkForUpload: True ** Attachment added: "Dependencies.txt" https://bugs.launchpad.net/bugs/1364111/+attachment/4192658/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1364111/+attachment/4192659/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
I have duplicated the behavior in VirtualBox 4.3.22 using the 64-bit 15.04 beta 1 livecd, but only when all CPU cores are completely busy (e.g. setting 1 core for the VM and running "dd < /dev/zero > /dev/null"). ** Description changed: If the Num lock key is toggled rapidly, there's a chance that mate-settings-daemon will go into runaway CPU usage (causing Xorg to also appear to be in runaway CPU usage), and the Num lock LED will flash/blink erratically (randomly--this is not the steady 2Hz blinking when a kernel panic occurs). By killing mate-settings-daemon, the system can recover; mate-settings-daemon respawns, Xorg goes back to normal CPU usage, and the Num lock LED is stable. - This behavior is present on an up-to-date installation of Ubuntu MATE 14.10 (beta 1)as well as the LiveCD. This seems to apply only to hardware Num lock toggling, as rapid toggling in onboard does not seem to cause the issue. The same does not appear to happen to the caps lock key. The state of num lock is indeed indeterminate when this occurs (e.g. numeric 4 will vary between typing '4' and left-arrow). This appears to be directly related to prior CPU availability, as it is more of a problem on older hardware (e.g. with 2001 Pentium M) where it can be triggered on an idle system, and more difficult to duplicate on later hardware (e.g. with a dual-core processor) unless the CPUs are busy (e.g. other runaway processes). - Only tested on 32-bit; will upload apport info. - --- + Tested on both 32-bit and 64-bit. This behavior is present at least since Ubuntu MATE 14.10 (beta 1). + --- ApportVersion: 2.14.7-0ubuntu1 Architecture: i386 DistroRelease: Ubuntu 14.10 InstallationDate: Installed on 2014-08-31 (1 days ago) InstallationMedia: Ubuntu MATE 14.10 "Utopic Unicorn" - beta1 i386 (20140828) Package: mate-settings-daemon 1.8.1-2 PackageArchitecture: all ProcVersionSignature: Ubuntu 3.16.0-11.16-generic 3.16.1 Tags: utopic Uname: Linux 3.16.0-11-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
Also, it looks like a patch has been submitted on github for this issue (based on the patch for gnome-settings-daemon), and should be incorporated by MATE 1.10. (At this point I'm assuming it's the same issue based on the comments there, although the initial description said "any key on the keypad".) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1318865] Re: The grub boot menu is often not drawn or visible
Thanks for the follow up. I apologize, it indeed was not my intent to expire the bug but rather to bring attention to it. I'm not a maintainer or triager, just another user here, so I'll go ahead and reopen it as New; I may not be able to assist with this issue further. Probably the only thing I would try is using grub-customizer as a matter of convenience and possibly (though not necessarily) safety. ** Changed in: grub2 (Ubuntu) Status: Expired => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1318865 Title: The grub boot menu is often not drawn or visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1318865/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
I apologize, I didn't mean to boss anyone around. I'm not in charge, nor am I a maintainer or triager, I am just another user. Please don't take this as representative of the ubuntu community. I talked briefly with a maintainer of xserver-xorg-video-intel, and they suggested the procedure for incorporating the necessary fixes for this issue in the non HWE release. Based on the response to Freedesktop#79165, it didn't seem to be obvious which patch this is, however. Cf. http://irclogs.ubuntu.com/2015/02/26/%23ubuntu-x.html : | [20:51] https://wiki.ubuntu.com/StableReleaseUpdates is the procedure | [20:51] bit of paperwork + making a fixed package Unfortunately I will not be able to assist with this issue any further. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1364111] Re: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable
The upstream discussion is only on how the issue occurs due to some form of desktop sharing (e.g. vnc, x2go, synergy, etc.). I am not using any of those--and I have yet to tell if the patch submitted solves this, so maybe this is not necessarily a duplicate of the upstream issue. The trigger I have identified here is CPU unavailability. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1364111 Title: Num lock toggling causing mate-settings-daemon, xorg cpu runaway, LED astable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1364111/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1366538] Re: Synchronisation/close /dev/sdX: i/o error on target host
I have used this workaround for a LaCie DVD RW (being used as a USB hard drive adapter): 059f:0363 (I obtain the usb id for my particular enclosure using `lsusb`). - For temporarily adding the quirks, I stop the kernel module: `modprobe -r usb-storage` (I may also need to stop dependent kernel modules, e.g. `modprobe -r uas` beforehand), and then restart with quirks: `modprobe usb-storage quirks=059f:0363:uw`. - For permanently adding the quirks, I followed the suggest in #34 where I use e.g. `sudo sh -c 'echo "options usb-storage quirks=059f:0363:uw" > /etc/modprobe.d/lacie-quirks.conf'`. Replace 059f:0363 with usb id for your enclosure, and maybe call it "maxtor- quirks.conf" if that's what you have. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1366538 Title: Synchronisation/close /dev/sdX: i/o error on target host To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1366538/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1051313] Re: 'cd' devalias is hardcoded in /install/ofboot.b on PowerPC
The issue is still present on the powerpc 32 and 64 bit mini.iso images found at https://help.ubuntu.com/community/Installation/MinimalCD -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to a duplicate bug report (35731). https://bugs.launchpad.net/bugs/1051313 Title: 'cd' devalias is hardcoded in /install/ofboot.b on PowerPC To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-cdimage/+bug/1051313/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] Re: users-admin: group name limited to 16 characters
** Attachment added: "Listed names of groups available are not truncated" https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1371854/+attachment/4209471/+files/Screenshot-Groups%20settings.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] [NEW] users-admin: group name limited to 16 characters
Public bug reported: In users-admin (a.k.a. Users Settings), under Manage Groups/Group Settings, while the listed groups available may have more than 16 characters, when viewing a group's properties the Group name field in Basic Settings only shows the first 16 characters (e.g. "chrome-remote- desktop" is truncated as "chrome-remote-de") . Additionally, this prevents creating a group with a name longer than 16 characters using users-admin. (I understand that the system limit may have been 16 characters historically; man groupadd reports it is currently 32 characters.) ** Affects: gnome-system-tools (Ubuntu) Importance: Undecided Status: New ** Attachment added: "Truncated group name" https://bugs.launchpad.net/bugs/1371854/+attachment/4209470/+files/Screenshot-Group%20%27chrome-remote-desktop%27%20Properties.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1291976] Re: installing LO 4.2.1 installs also outdated openjdk-6-jre
The package libreoffice has been dependant on default-jre (e.g. through libreoffice-base) and not any specific openjdk version. default-jre, for 12.10 and more recent, now depends on openjdk-7-jre (unsure as of when), so this issue should be resolved, although it was not a libreoffice issue to begin with. However, I think that if openjdk-6-jre is already installed by something else, libreoffice will not require default-jre (and not openjdk-7-jre either). ** Also affects: java-common (Ubuntu) Importance: Undecided Status: New ** Changed in: java-common (Ubuntu) Status: New => Fix Released ** Changed in: libreoffice (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1291976 Title: installing LO 4.2.1 installs also outdated openjdk-6-jre To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/java-common/+bug/1291976/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1337313] Re: context menus dont work
Does bug 1272725 (upstream freedesktop-bug 73115) happen to describe your issue? (It may not since the discussion is that it is KDE specific.) I find a few of reports, e.g. on ask.libreoffice.org, about slow dialogs; one remedy being resetting the user profile (http://ask.libreoffice.org/en/question/3190/libreoffice-ui-dialogs- slow-to-open/). It may also be a hardware/driver issue, so you may want to post that information. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1337313 Title: context menus dont work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1337313/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1334763] Re: Writer unable to increase/decrease (reduce) the font size
*** This bug is a duplicate of bug 783383 *** https://bugs.launchpad.net/bugs/783383 ** Bug watch added: freedesktop.org Bugzilla #35862 https://bugs.freedesktop.org/show_bug.cgi?id=35862 ** Also affects: df-libreoffice via https://bugs.freedesktop.org/show_bug.cgi?id=35862 Importance: Unknown Status: Unknown ** This bug has been marked a duplicate of bug 783383 [upstream] "Increase font" and "decrease font" could work even if the selection contains differing font sizes -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1334763 Title: Writer unable to increase/decrease (reduce) the font size To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1334763/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1334763] Re: Writer unable to increase/decrease (reduce) the font size
*** This bug is a duplicate of bug 783383 *** https://bugs.launchpad.net/bugs/783383 You will probably want to file a separate bug report for adjusting the size increment as an enhancement request if there's no such setting already. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1334763 Title: Writer unable to increase/decrease (reduce) the font size To manage notifications about this bug go to: https://bugs.launchpad.net/df-libreoffice/+bug/1334763/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1343028] Re: No graphics in LibreOffice Help Files
*** This bug is a duplicate of bug 1136933 *** https://bugs.launchpad.net/bugs/1136933 ** This bug has been marked a duplicate of bug 1136933 Documentation images (e.g. of icons) missing -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1343028 Title: No graphics in LibreOffice Help Files To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1343028/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1136933] Re: Documentation images (e.g. of icons) missing
** Description changed: Help docs contain some images, e.g., of buttons/icons, but they seem to be missing from the Ubuntu distribution. Instead of the missing images you see some kind of default icon with the - text "wnd.sun.st" (see attached screen-shot). + text "vnd.sun.st" (see attached screen-shot). Some of these are quite crucial -- they document actions which can only (apparently) be accessed by pressing a button, not via menus. So if you can't see what the button looks like, there is no way to know how to access that function. TO REPRODUCE: Help->Libre Office Help Search for "read-only documents;editing" RESULTS: It says "use the Edit File icon to activate..." (no mention of any other way, such as via menus), and displays an error icon. EXPECTED RESULTS: You should see a picture of the icon you are supposed to use. RELEVANT DETAILS: Affects the help in any language. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: libreoffice-calc 1:3.5.7-0ubuntu4 ProcVersionSignature: Ubuntu 3.2.0-29.46-generic 3.2.24 Uname: Linux 3.2.0-29-generic x86_64 NonfreeKernelModules: fglrx ApportVersion: 2.0.1-0ubuntu17.1 Architecture: amd64 Date: Thu Feb 28 18:27:29 2013 InstallationMedia: Xubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MarkForUpload: True ProcEnviron: LANGUAGE= TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: libreoffice UpgradeStatus: Upgraded to precise on 2012-08-10 (202 days ago) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1136933 Title: Documentation images (e.g. of icons) missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1136933/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1338324] Re: CTRL (SHIFT) SPACE blocked by keyboard layout switch - unable to insert non-breaking spaces in Writer
In the xfce keyboard settings, I don't even see ctrl+space as a listed shortcut for Change layout option. Nonetheless, if you are able to change this and it allows typing NBSP, then that is a workaround. Two more workarounds: - In LibreOffice, go to Tools > Customize > Keyboard and pick a different shortcut for NBSP. - Or, go to Insert > Special Character and choose Subset > Latin-1, which should select NBSP (unicode U+00A0 (160)). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1338324 Title: CTRL (SHIFT) SPACE blocked by keyboard layout switch - unable to insert non-breaking spaces in Writer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4/+bug/1338324/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1344752] Re: key combo Shift-Ctrl-Space (non-breaking space) does not work
You use a German locale--do you use multiple keyboard layouts? As in bug 1338324, there is a conflict between Ctrl+Space (which I cannot confirm) as an XFCE shortcut and NBSP, which looks like it can be changed in Keyboard settings. If that is the case, this report is duplicate. I have described a couple other workarounds there. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1344752 Title: key combo Shift-Ctrl-Space (non-breaking space) does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1344752/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307162] Re: Can't open ODT documents that are in the trash
I cannot reproduce on Ubuntu 14.10 with MATE 1.8, LibreOffice 4.3.0.2. Even if I trash an empty file ending in .odt, it is recognized as being for Writer. This may be specific to LibreOffice 3.5.x/12.04, but I cannot confirm for myself. Are you using Unity, or some other desktop environment? Are you using the "File > New document" template in the Files program, or saving from Writer? (In caja, I have no templates in "File > New document" other than "empty file".) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307162 Title: Can't open ODT documents that are in the trash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1307162/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307162] Re: Can't open ODT documents that are in the trash
Sorry, I misunderstood the screenshot--it is the filter selection window for unrecognized formats in LibreOffice, i.e. the correct program was opened--not a matter of the file manager or desktop environment. Now, are trashed .odt files with content recognized? (In which case, I cannot reproduce.) That would be a more important issue, and it's what I thought the title of this report meant. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307162 Title: Can't open ODT documents that are in the trash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1307162/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1344752] Re: key combo Shift-Ctrl-Space (non-breaking space) does not work
Ok, searching"xfce ctrl space" or "ubuntu ctrl space" one case that others have found this to be an issue is with IBus. See the links for description and workaround. http://askubuntu.com/q/243639 http://peter-butkovic.blogspot.com/2013/05/keyboard-shortcut-ctrlspace-caught-in.html -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1344752 Title: key combo Shift-Ctrl-Space (non-breaking space) does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1344752/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1338324] Re: CTRL (SHIFT) SPACE blocked by keyboard layout switch - unable to insert non-breaking spaces in Writer
I may have mislead myself by the description saying that Ctrl+Space was switching keyboard layouts (under XFCE), rather than controlling (e.g.) IBus as some other xfce/xubuntu users have found. See discussion over on bug 1344752, which may be a duplicate. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1338324 Title: CTRL (SHIFT) SPACE blocked by keyboard layout switch - unable to insert non-breaking spaces in Writer To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4/+bug/1338324/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1333073] [NEW] Fatal error when opening…loading libexpwraplo.so failed
Public bug reported: When I install the libreoffice package (1:4.3.0~rc1-0ubuntu1~trusty0) on Ubuntu 14.04 from ppa:libreoffice/libreoffice-prereleases, both 32-bit and 64-bit, the splash screen appears, soon followed by a Fatal Error dialog: The application cannot be started. service not supplied: loading component library failed I have not tested if any upstream packaging produces the error. ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1333073 Title: Fatal error when opening…loading libexpwraplo.so failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1333073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1333073] Re: PPA Fatal error when opening…loading libexpwraplo.so failed
Thanks for tagging with ppa, as I should have per https://help.ubuntu.com/community/ReportingBugs#Bug_reporting_etiquette Note that I cannot collect info using apport: it does not detect the fatal error, and "apport-bug libreoffice" will not proceed due to it not being an official Ubuntu package. Any other info that would help? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1333073 Title: PPA Fatal error when opening…loading libexpwraplo.so failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1333073/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1416776] [NEW] [PPA] LibreOffice 4.4.0-rc3 (Vivid) depends on libcmis-0.5-5 (unavailable in Ubuntu)
Public bug reported: The package libreoffice-core in ppa:libreoffice/ppa and ppa:libreoffice/libreoffice-4-4 depend on libcmis-0.5-5, which is not available in Ubuntu (although it is available on Debian experimental; manually installing the package from there works). This is only the case for the Vivid series, and not Trusty/Utopic. ** Affects: libreoffice (Ubuntu) Importance: Undecided Status: New ** Tags: ppa vivid ** Package changed: qt4-x11 (Ubuntu) => libreoffice (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1416776 Title: [PPA] LibreOffice 4.4.0-rc3 (Vivid) depends on libcmis-0.5-5 (unavailable in Ubuntu) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1416776/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscures submenus
** Also affects: grub2-themes-ubuntu-mate (Ubuntu) Importance: Undecided Status: New ** Summary changed: - grub2-themes-ubuntu-mate partially obscures submenus + grub2-themes-ubuntu-mate partially obscured submenus -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
I cannot reproduce the issue for grub2-2.02~beta2-18. For the default config file, the default boot behavior seems different: there is a visible 10 second timeout, rather than immediate boot. update-grub also no longer warns "Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported". ** Also affects: grub2 (Ubuntu) Importance: Undecided Status: New ** Changed in: grub2 (Ubuntu) Status: New => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1401318] Re: GRUB menu doesn't appear after showing "GRUB loading."
** Bug watch added: GNU Savannah Bug Tracker #40853 http://savannah.gnu.org/bugs/?40853 ** Also affects: grub via http://savannah.gnu.org/bugs/?40853 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1401318 Title: GRUB menu doesn't appear after showing "GRUB loading." To manage notifications about this bug go to: https://bugs.launchpad.net/grub/+bug/1401318/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1352523] Re: Ubuntu 14.04 i386 will not boot on Dell Dimension 4600
The graphical capabilities in grub2 are supposedly rather sophisticated nowadays. Graphical boot can be disabled by uncommenting GRUB_TERMINAL=console in /etc/default/grub and running update-grub. This is probably better for your monitor anyways. I would think there are certain modules in grub2 that are responsible for this, but I am not familiar with troubleshooting them other than version-hopping, not unlike you have done. I might suggest installing a more recent version of grub not yet in 14.04 to see if a more recent version has fixed this. Here's how we can install grub2-2.02~beta2-18 (while it's available): mkdir grub2.02b2-18 cd grub2.02b2-18 wget http://mirrors.kernel.org/ubuntu/pool/universe/g/grub2/grub-common_2.02~beta2-18_i386.deb wget http://mirrors.kernel.org/ubuntu/pool/universe/g/grub2/grub2-common_2.02~beta2-18_i386.deb wget http://mirrors.kernel.org/ubuntu/pool/universe/g/grub2/grub2_2.02~beta2-18_i386.deb wget http://mirrors.kernel.org/ubuntu/pool/universe/g/grub2/grub-pc_2.02~beta2-18_i386.deb wget http://mirrors.kernel.org/ubuntu/pool/universe/g/grub2/grub-pc-bin_2.02~beta2-18_i386.deb sudo dpkg -i *.deb We can downgrade back if necessary, but what could possibly go wrong? sudo apt-get install grub2-common=2.02~beta2-9ubuntu1 grub2=2.02~beta2-9ubuntu1 grub-pc=2.02~beta2-9ubuntu1 grub- common=2.02~beta2-9ubuntu1 grub-pc-bin=2.02~beta2-9ubuntu1 (2.02~beta2-9ubuntu1 is the current version for 14.04 at the moment; change this for each package if this no longer the case.) I wouldn't think the chipset is an issue, but I don't have any 845PE-based machines on me at the moment. According to the chipset specifications, this model does not have onboard video, so if you happen to have another AGP graphics card, I would suggest swapping to see if the graphics card is indeed an issue. ** Changed in: grub2 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1352523 Title: Ubuntu 14.04 i386 will not boot on Dell Dimension 4600 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1352523/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1352523] Re: Ubuntu 14.04 i386 will not boot on Dell Dimension 4600
** Changed in: grub2 (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1352523 Title: Ubuntu 14.04 i386 will not boot on Dell Dimension 4600 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1352523/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] Re: users-admin: group name limited to 16 characters
** Description changed: In users-admin (a.k.a. Users Settings), under Manage Groups/Group Settings, while the listed groups available may have more than 16 characters, when viewing a group's properties the Group name field in Basic Settings only shows the first 16 characters (e.g. "chrome-remote- desktop" is truncated as "chrome-remote-de") . Additionally, this prevents creating a group with a name longer than 16 characters using users-admin. (I understand that the system limit may have been 16 characters historically; man groupadd reports it is currently 32 characters.) + + Present in both 14.04 (gnome-system-tools 3.0.0-3ubuntu4) and 14.10 + (3.0.0-3ubuntu5). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] Re: users-admin: group name limited to 16 characters
** Also affects: ubuntu-mate Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1299138] Re: [users-admin] User settings might hang when password is too simple
I can reproduce this on Ubuntu MATE 14.04.1 (gnome-system-tools 3.0.0-3ubuntu4) and Ubuntu MATE 14.10 (3.0.0-3ubuntu5). Specifically, the entire program doesn't hang (nor is there any CPU runaway), the "Change User Password" dialog itself becomes unresponsive and can be closed, and the password does not change. I get less terminal output than @intherye when I run (not getting any output when closing the window): $ users-admin (users-admin:2402): Liboobs-WARNING **: There was an unknown error communicating asynchronously with the backends: Launch helper exited with unknown return code 255 The same happens when I run users-admin over ssh from linux but, interestingly, NOT when I run over ssh from OS X: same terminal output, and the UI isn't decorated (using OpenSSH_6.7p1, OpenSSL 1.0.1j 15 Oct 2014 for macports and XQuartz 2.7.8_beta1 on OS X 10.10.1). ** Changed in: gnome-system-tools (Ubuntu) Status: New => Confirmed ** Also affects: ubuntu-mate Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1299138 Title: [users-admin] User settings might hang when password is too simple To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1299138/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
** Changed in: grub2 (Ubuntu) Status: Fix Committed => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
I can reproduce this on a physical machine with grub2-2.02~beta2-18. The workaround still applies. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1299138] Re: [users-admin] User settings might hang when password is too simple
** Bug watch added: Debian Bug tracker #773614 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773614 ** Also affects: gnome-system-tools (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773614 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1299138 Title: [users-admin] User settings might hang when password is too simple To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1299138/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] Re: users-admin: group name limited to 16 characters
** Bug watch added: Debian Bug tracker #773613 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773613 ** Also affects: gnome-system-tools (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=773613 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 480159] Re: grub console is ridiculously slow
I'm experiencing this with the NVIDIA Quadro FX 500/600 AGP (if I remember correctly), and ONLY on the DVI port--both when using a DVI monitor or a DVI to VGA adapter. Using grub2-2.02~beta2-15 on Ubuntu MATE 14.10 which by default uses a graphical theme (grub2-themes-ubuntu- mate), so I don't know if I'm experiencing a better or worse degree of slowness. Rather than using the monitor's 1280x1024 resolution as do Linux and grub2 on other machines, it seems to fallback to 640x480 and very few colors, and unless I pass a kernel argument (e.g. vga=795) the console output is unreadable white "blocks". The drawing speed seems slightly faster on one of the machines--which I assume is due to a faster FSB (533MT/s vs 400MT/s, since they both use AGP 4x and the one that draws slower has a faster CPU clock: 2.9GHz vs 2.4GHz). If I use GRUB_GFXMODE=1280x1024 in /etc/default/grub, it behaves much faster and in full color, just like when using the VGA port. Fast forward to 2014, and I can find various reports of similar bugs but for quite a variety of hardware, and some of which have been resolved. I should be able to collect the output of vbeinfo if desired. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/480159 Title: grub console is ridiculously slow To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/480159/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1318865] Re: The grub boot menu is often not drawn or visible
I did experience the issue described here recently, including how holding right shift fails to bring up the menu on a virtual host, and it would boot without a delay (using grub2-2.02~beta2-9ubuntu1 and 2.02~beta2-15). I then upgraded to the preview version (2.02~beta2-18 at the time) and noticed a change in some of the boot behavior--e.g. there is now a visible menu and 10 second countdown displayed as well. I think this is due to items of /etc/default/grub (GRUB_TIMEOUT, GRUB_HIDDEN_TIMEOUT, etc.), so it might help to post that if it's been modified at all, and I'm not inclined to put myself as affected by this bug unless I can try out/reproduce your configuration. The following should let you try grub2-2.02~beta2-19 for amd64 (BIOS) to see if that makes any difference: mkdir grub-preview cd grub-preview wget http://archive.ubuntu.com/ubuntu/pool/universe/g/grub2/grub2_2.02~beta2-19_amd64.deb wget http://archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub-common_2.02~beta2-19_amd64.deb wget http://archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub2-common_2.02~beta2-19_amd64.deb wget http://archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub-pc_2.02~beta2-19_amd64.deb wget http://archive.ubuntu.com/ubuntu/pool/main/g/grub2/grub-pc-bin_2.02~beta2-19_amd64.deb sudo dpkg --install grub*.deb To revert to 2.02~beta2-9ubuntu1 (current version for 14.04 trusty, may change): sudo apt-get install grub2=2.02~beta2-9ubuntu1 \ grub-pc=2.02~beta2-9ubuntu1 \ grub-common=2.02~beta2-9ubuntu1 \ grub2-common=2.02~beta2-9ubuntu1 \ grub-pc-bin=2.02~beta2-9ubuntu1 ** Changed in: grub2 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1318865 Title: The grub boot menu is often not drawn or visible To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1318865/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1247700] Re: default kernel order issue with RC and final versions
At first, it looks like this is simply because "/boot/vmlinuz-3.12.0-031200rc7-generic" is lexicographically greater than "/boot/vmlinuz-3.12.0-031200-generic", but I haven't actually looked at the source for grub2, and something in /etc/grub.d/10_linux may also be responsible for sorting the entries. I haven't come across documentation saying whether or not this is expected behavior, but in bug 476540 it was mentioned how the entry sorting was changed to the algorithm used by dpkg. The discussion in http://savannah.gnu.org/bugs/?42597 would indicate this is issue is due to the intended behavior of /etc/grub.d/10_linux, at least upstream. There are several other similar discussions grub2's kernel menu sorting and /etc/grub.d/10_linux. There was a similar issue reported with update-initramfs that was resolved by using the linux-version command (from linux-base): cf. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770394 . This might be something to incorporate into /etc/grub.d/10_linux as a solution to this and similar issues. I happened to be testing mainline kernels at the moment, and as a workaround I use grub-customizer to specify which kernel to boot. ** Bug watch added: GNU Savannah Bug Tracker #42597 http://savannah.gnu.org/bugs/?42597 ** Bug watch added: Debian Bug tracker #770394 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770394 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1247700 Title: default kernel order issue with RC and final versions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1247700/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1247700] Re: default kernel order issue with RC and final versions
The issue is not present in grub2-2.02~beta2-19 (latest version for 15.04 Vivid) Using one machine with test kernels, update-grub outputs: Found linux image: /boot/vmlinuz-3.17.0-custom Found initrd image: /boot/initrd.img-3.17.0-custom Found linux image: /boot/vmlinuz-3.17.0-rc1-custom Found initrd image: /boot/initrd.img-3.17.0-rc1-custom Found linux image: /boot/vmlinuz-3.16.0-29-generic Found initrd image: /boot/initrd.img-3.16.0-29-generic … and grub2 lists 3.17.0-custom as the default kernel, not 3.17.0-rc1-custom. Based on the changelog, this was probably fixed in grub2-2.00-20: > * Backport from upstream: >- Sort gnumach kernels in version order (closes: #725451). > -- Colin Watson 14 Nov 2013 I will mark this as Incomplete as suggested by the canned responses: "13.10 reached EOL on 17 July 2014…Please upgrade to the latest version and re-test." ** Changed in: grub2 (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1247700 Title: default kernel order issue with RC and final versions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1247700/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1247700] Re: default kernel order issue with RC and final versions
** Changed in: grub2 (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1247700 Title: default kernel order issue with RC and final versions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1247700/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1247700] Re: default kernel order issue with RC and final versions
Ok, the issue is present in 14.04 with grub2-2.02~beta2-9ubuntu1. Found linux image: /boot/vmlinuz-3.18.0-031800rc7-generic Found initrd image: /boot/initrd.img-3.18.0-031800rc7-generic Found linux image: /boot/vmlinuz-3.18.0-031800-generic Found initrd image: /boot/initrd.img-3.18.0-031800-generic Found linux image: /boot/vmlinuz-3.13.0-44-generic Found initrd image: /boot/initrd.img-3.13.0-44-generic … and it boots 3.18.0-031800rc7 by default. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1247700 Title: default kernel order issue with RC and final versions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1247700/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1247700] Re: default kernel order issue with RC and final versions
Using the same packaged mainline kernel example I just did with grub2-2.02~beta2-19, the issue IS still present: Found linux image: /boot/vmlinuz-3.18.0-031800rc7-generic Found initrd image: /boot/initrd.img-3.18.0-031800rc7-generic Found linux image: /boot/vmlinuz-3.18.0-031800-generic Found initrd image: /boot/initrd.img-3.18.0-031800-generic Found linux image: /boot/vmlinuz-3.13.0-44-generic Found initrd image: /boot/initrd.img-3.13.0-44-generic … and it boots 3.18.0-031800rc7 by default. So I'm not sure what the discrepancy is between this not working and it working as in comment 3, unfortunately. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1247700 Title: default kernel order issue with RC and final versions To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1247700/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307162] Re: Can't open ODT documents that are in the trash
** Changed in: libreoffice (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307162 Title: Can't open ODT documents that are in the trash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1307162/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1307162] Re: Can't open ODT documents that are in the trash
How exactly is the empty document created? Can you upload a copy of the "empty" ods file? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1307162 Title: Can't open ODT documents that are in the trash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libreoffice/+bug/1307162/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
** Also affects: xserver-xorg-video-intel (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
As I reported upstream (mozilla-bugs:1005501), the bug is due to xserver-xorg-video-intel, and was fixed somewhere between 2:2.99.910 and 2:2.99.911 (c.f. freedesktop:79165). The bug is therefore already fixed in 14.10, so it should be fixed in 14.04 once the 14.04.2 point release is published (i.e. "xserver-xorg-video-intel-lts-utopic" becomes available on trusty-updates) on 5 February 2015. I don't see a 12.04.6 point release scheduled, however, so if 12.04.5 is affected, upgrading to 14.04.2 may be necessary. Aside from using ppa:xorg-edgers/ppa (dangerous) and xserver-xorg-video-intel-lts-utopic on ppa:canonical-x/x-staging (which doesn't look meant for general or even troubleshooting use), I otherwise don't know how to obtain a packaged fix ahead of time for 14.04 or at all for 12.04. Maybe someone at Ubuntu-X can help. ** Changed in: xserver-xorg-video-intel (Ubuntu) Status: New => Fix Committed ** Bug watch added: freedesktop.org Bugzilla #79165 https://bugs.freedesktop.org/show_bug.cgi?id=79165 ** Also affects: xserver-xorg-video-intel via https://bugs.freedesktop.org/show_bug.cgi?id=79165 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
It may be possible to obtain the fix for 14.04 using the Intel Graphics Installer 1.0.7, which installs xf86-video-intel 2.99.911. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
You need to upgrade to the version for the 14.04.2 point release (2:2.99.914-1~exp1ubuntu4.2~trusty1), see https://wiki.ubuntu.com/Kernel/LTSEnablementStack -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1095294] Re: Package smbfs and smbmount missing since cifs-utils-5.5
There are varying instructions out there, but it may be the case that /usr/bin/smbmount had its permissions set specifically so that non-root users could execute it and mount shares, as explained in https://help.ubuntu.com/community/Samba/SambaClientGuide . In that same guide there are ways to allow non-root access for mount.cifs, such as by using groups (rather than chmod-ing the executable), and to automatically mount a share on startup (by using /etc/fstab, not /etc/rc.local). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1095294 Title: Package smbfs and smbmount missing since cifs-utils-5.5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cifs-utils/+bug/1095294/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 713487] Re: ExpressCard compact flash card DMA setting is wrong
I have the same Lexar Expresscard CompactFlash reader, and encountered this issue is still present in Ubuntu 17.10, even when using mainline kernel (4.14.2). ** Changed in: linux (Ubuntu) Status: Expired => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/713487 Title: ExpressCard compact flash card DMA setting is wrong To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/713487/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 713487] Re: ExpressCard compact flash card DMA setting is wrong
After a little more digging, I came across the original reporter's correspondence on the linux-ide mailing list which determined because the adapter appears as a generic JMicron PCIe to PATA controller, it couldn't be reliably whitelisted without affecting other devices with the same controller. For reference, the workaround is to use module parameter libata.force=80c. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/713487 Title: ExpressCard compact flash card DMA setting is wrong To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/713487/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1371854] Re: users-admin: group name limited to 16 characters
(copied from latest Debian bug message) It appears that this issue is resolved simply by adjusting max_length of the group_settings_name GtkEntry widget. Attached is a patch which increases max_length from 16 to 32 characters. I do not know if this is only appropriate for recent Linux distributions (i.e. if kFreeBSD or other platforms using g-s-t have more conservative limits). ** Patch added: "Increase maximum group name length to 32 characters" https://bugs.launchpad.net/ubuntu/+source/gnome-system-tools/+bug/1371854/+attachment/5023714/+files/max_group_name_32_chars.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1371854 Title: users-admin: group name limited to 16 characters To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1371854/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1676999] [NEW] spyder 3.1.3 requires jedi = 0.9.0
Public bug reported: spyder 3.1.3 requires jedi = 0.9.0, but (1) the strict dependency is not specified in the packages for spyder, and (2) Ubuntu 17.04 upgraded jedi to 0.10.0. As a result, Spyder shows a warning on startup that the dependency is missing, and functionality is affected (e.g. code completion). This applies to both the Python 2 and Python 3 packages for spyder. I haven't found what spyder's upstream plans are for finishing jedi > 0.9.0 support. ** Affects: spyder (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1676999 Title: spyder 3.1.3 requires jedi = 0.9.0 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/spyder/+bug/1676999/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 581428] Re: system-config-lvm hangs while executing lengthy commands
The pvmove example still hangs in version 1.1.18-2ubuntu1. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/581428 Title: system-config-lvm hangs while executing lengthy commands To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-lvm/+bug/581428/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1607149] Re: No se instala el paquete Amaya.
I am not a maintainer or triager. I do not think this report concerns the package system-config-lvm. The package libssl0.9.8 is no longer included in Ubuntu as of 15.10, it has been replaced by libssl1.0.0. I am unsure whether Amaya can be compiled sucessfully on 16.04 without the dependency. Other users report they can install libssl0.9.8 by manually downloading it from Ubuntu packages: http://packages.ubuntu.com/trusty- updates/libssl0.9.8 No soy un mantenedor o triager. No creo que este informe se refiera al paquete system-config-lvm. El paquete libssl0.9.8 ya no está incluido en Ubuntu desde 15.10, ha sido reemplazado por libssl1.0.0. No estoy seguro de si Amaya puede ser compilado con éxito en 16.04 sin la dependencia. Otros usuarios informan que pueden instalar libssl0.9.8 descargándolo manualmente de Ubuntu packages: http://packages.ubuntu.com/trusty- updates/libssl0.9.8 ** Changed in: system-config-lvm (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1607149 Title: No se instala el paquete Amaya. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/system-config-lvm/+bug/1607149/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1314924] Re: Adressbox Entries unreadable: Grey/Black Mask overlaying text
The issue is no longer present as of firefox 49 shipped by ubuntu. (Using firefox-mozilla-build, the issue was resolved as of version 46.) No graphics updates whatsoever from 14.04 (xserver-xorg-video-intel 2:2.99.910-0ubuntu1) should be necessary. ** Changed in: firefox (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1314924 Title: Adressbox Entries unreadable: Grey/Black Mask overlaying text To manage notifications about this bug go to: https://bugs.launchpad.net/xserver-xorg-video-intel/+bug/1314924/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 711858] Re: lshw-gtk should run as administrator (root)
*** This bug is a duplicate of bug 228160 *** https://bugs.launchpad.net/bugs/228160 ** This bug has been marked a duplicate of bug 228160 lshw-gtk -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711858 Title: lshw-gtk should run as administrator (root) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lshw/+bug/711858/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
Marc, I think the issue you're describing might be bug 1569563 or 1560332, but it's not the one here. The issue here is regarding the grub2 boot menu theme, not mate-menu or anything else in the MATE desktop environment itself. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
@ Marc: No worries, thanks for getting involved! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
** Attachment added: "unobscured edit dialog" https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+attachment/4640334/+files/unobscured%20edit%20dialog.png ** Also affects: ubuntu-mate-artwork (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404006] Re: grub2-themes-ubuntu-mate partially obscured submenus
Using the default configuration, as of grub2 2.02~beta2-36 the edit dialog seems to no longer be obscured as in the screenshot I had uploaded in 2014: it is drawn over only a centered portion of the screen (see new screenshot "unobscured edit dialog"). However, I've also found that if the GRUB_THEME="/boot/grub/themes /ubuntu-mate/theme.txt" parameter is specified in /etc/default/grub, then update-grub reports "Found theme: /boot/grub/themes/ubuntu- mate/theme.txt", and the submenus use graphical rather than console appearance, and are not obscured (see new screenshot "graphical submenu"). I'm guessing the GRUB_THEME approach for setting the theme is what grub recommends, and that the current method used (file /usr/share/plymouth/themes/ubuntu-mate-logo/ubuntu-mate-logo.grub from package plymouth-theme-ubuntu-mate-logo) is somehow insufficient, since each approach seems to have a different effect on how grub.cfg is generated. So while there may be an issue in how grub is being configured to use the theme (whether from the right package or using the right configuration parameters), there might still be an inconsistency in how grub itself mixes graphical and console interfaces, or fails to detect improper theme configuration and fallback to providing a safe workaround for the user. ** Attachment added: "graphical submenu" https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+attachment/4640333/+files/graphical%20submenu.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404006 Title: grub2-themes-ubuntu-mate partially obscured submenus To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1404006/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs