[Bug 1771301] Re: Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels
** Patch added: "0001-vxlan-correctly-handle-ipv6.disable-module-parameter.patch" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771301/+attachment/5139772/+files/0001-vxlan-correctly-handle-ipv6.disable-module-parameter.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1771301 Title: Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1771301] Re: Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels
** Description changed: When booting with ipv6.disable=1, vxlan will fail to initialize with the error "vxlan: Cannot bind port 4789, err=-97" which is EAFNOSUPPORT. Expected result is that vxlan tunnels work when ipv6 is disabled. Description: Ubuntu 16.04.4 LTS Release: 16.04 linux-image-4.4.0-124-generic bug is fixed in RHEL in https://bugzilla.redhat.com/show_bug.cgi?id=1445054 + + Steps to reproduce: + + Deploy two identical 14.04 nodes with the following configuration: + + Add the following to /etc/default/grub then run 'sudo update-grub' + GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1" + + Reboot both nodes + sudo reboot + + Set up a tunnel using the following commands on each node modifying + remote_ip to be the ip of the other node. modify veth0 ip to be subnet + using the tunnel 10.10.10.x/24 + + ovs-vsctl del-port br-int vx1 + ovs-vsctl del-port br-int veth1 + ip link del veth0 + + ovs-vsctl add-port br-int vx1 -- set interface vx1 type=vxlan options:remote_ip=192.168.122.161 + # remote_ip should be the ip of the other node + + ip link add type veth + ip link set veth0 up + ip link set veth1 up + ovs-vsctl add-port br-int veth1 + ip addr add 10.10.10.2/24 dev veth0 # on the second node use 10.10.10.3/24 + + Expected result is once the tunnel is configured on each side, you + should be able to ping the ip of veth0 on the remote side while ipv6 is + disabled. + + ping 10.10.10.2 or 10.10.10.3, whichever is the remote side. ** Description changed: - When booting with ipv6.disable=1, vxlan will fail to initialize with the - error "vxlan: Cannot bind port 4789, err=-97" which is EAFNOSUPPORT. + When booting with ipv6.disable=1, vxlan tunnels will fail to initialize + with the error "vxlan: Cannot bind port 4789, err=-97" which is + EAFNOSUPPORT. Expected result is that vxlan tunnels work when ipv6 is disabled. Description: Ubuntu 16.04.4 LTS Release: 16.04 linux-image-4.4.0-124-generic bug is fixed in RHEL in https://bugzilla.redhat.com/show_bug.cgi?id=1445054 Steps to reproduce: Deploy two identical 14.04 nodes with the following configuration: - Add the following to /etc/default/grub then run 'sudo update-grub' - GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1" + Add the following to /etc/default/grub then run 'sudo update-grub' + GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1" Reboot both nodes - sudo reboot + sudo reboot Set up a tunnel using the following commands on each node modifying remote_ip to be the ip of the other node. modify veth0 ip to be subnet using the tunnel 10.10.10.x/24 - ovs-vsctl del-port br-int vx1 - ovs-vsctl del-port br-int veth1 - ip link del veth0 + ovs-vsctl del-port br-int vx1 + ovs-vsctl del-port br-int veth1 + ip link del veth0 - ovs-vsctl add-port br-int vx1 -- set interface vx1 type=vxlan options:remote_ip=192.168.122.161 - # remote_ip should be the ip of the other node + ovs-vsctl add-port br-int vx1 -- set interface vx1 type=vxlan options:remote_ip=192.168.122.161 + # remote_ip should be the ip of the other node - ip link add type veth - ip link set veth0 up - ip link set veth1 up - ovs-vsctl add-port br-int veth1 - ip addr add 10.10.10.2/24 dev veth0 # on the second node use 10.10.10.3/24 + ip link add type veth + ip link set veth0 up + ip link set veth1 up + ovs-vsctl add-port br-int veth1 + ip addr add 10.10.10.2/24 dev veth0 # on the second node use 10.10.10.3/24 Expected result is once the tunnel is configured on each side, you should be able to ping the ip of veth0 on the remote side while ipv6 is disabled. ping 10.10.10.2 or 10.10.10.3, whichever is the remote side. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1771301 Title: Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1771301] [NEW] Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels
Public bug reported: When booting with ipv6.disable=1, vxlan tunnels will fail to initialize with the error "vxlan: Cannot bind port 4789, err=-97" which is EAFNOSUPPORT. Expected result is that vxlan tunnels work when ipv6 is disabled. Description:Ubuntu 16.04.4 LTS Release:16.04 linux-image-4.4.0-124-generic bug is fixed in RHEL in https://bugzilla.redhat.com/show_bug.cgi?id=1445054 Steps to reproduce: Deploy two identical 14.04 nodes with the following configuration: Add the following to /etc/default/grub then run 'sudo update-grub' GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1" Reboot both nodes sudo reboot Set up a tunnel using the following commands on each node modifying remote_ip to be the ip of the other node. modify veth0 ip to be subnet using the tunnel 10.10.10.x/24 ovs-vsctl del-port br-int vx1 ovs-vsctl del-port br-int veth1 ip link del veth0 ovs-vsctl add-port br-int vx1 -- set interface vx1 type=vxlan options:remote_ip=192.168.122.161 # remote_ip should be the ip of the other node ip link add type veth ip link set veth0 up ip link set veth1 up ovs-vsctl add-port br-int veth1 ip addr add 10.10.10.2/24 dev veth0 # on the second node use 10.10.10.3/24 Expected result is once the tunnel is configured on each side, you should be able to ping the ip of veth0 on the remote side while ipv6 is disabled. ping 10.10.10.2 or 10.10.10.3, whichever is the remote side. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1771301 Title: Setting ipv6.disable=1 prevents both IPv4 and IPv6 socket opening for VXLAN tunnels To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1771301/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1103881] Re: cloud-final is never executed if upstart or any dependency is upgraded during initialization
*** This bug is a duplicate of bug 1124384 *** https://bugs.launchpad.net/bugs/1124384 With juju 1.24 this bug appears to be hit on state servers started with 'juju ensure-availability' during cloud-init upgrade, unless enable-os- refresh-update and enable-os-upgrade are set to false. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to cloud-init in Ubuntu. https://bugs.launchpad.net/bugs/1103881 Title: cloud-final is never executed if upstart or any dependency is upgraded during initialization To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1103881/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1103881] Re: cloud-final is never executed if upstart or any dependency is upgraded during initialization
*** This bug is a duplicate of bug 1124384 *** https://bugs.launchpad.net/bugs/1124384 With juju 1.24 this bug appears to be hit on state servers started with 'juju ensure-availability' during cloud-init upgrade, unless enable-os- refresh-update and enable-os-upgrade are set to false. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1103881 Title: cloud-final is never executed if upstart or any dependency is upgraded during initialization To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cloud-init/+bug/1103881/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1341496] Re: corosync hangs inside libqb
Marking verification-done for trusty based on reports of no longer seeing the corosync 100% cpu issue after applying this update ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1341496 Title: corosync hangs inside libqb To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libqb/+bug/1341496/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1296681] Re: failed to change apparmor profile to lxc-container-default
*** This bug is a duplicate of bug 1296459 *** https://bugs.launchpad.net/bugs/1296459 I seem to be seeing this issue as well. I'm not sure if its the duplicate issue. The profile config file name is lxc-default-with-mounting yet the actual profile name appears to be changed to lxc-container-default- with-mounting causing confusion. /etc/apparmor.d/lxc/lxc-default-with-mounting Inside that file the profile name is lxc-container-default-with- mounting. I presume that at some point the profile naming convention was changed from lxc-default to lxc-container-default but the file name didn't get changed to match the convention. This is confusing because if I configure the apparmor profile in the lxc config based on the config filename I'll get an error: lxc.aa_profile = lxc-default-with-mounting error: lxc-start: No such file or directory - failed to change apparmor profile to lxc-default-with-mounting using the actual profile name from inside the file lxc.aa_profile = lxc-container-default-with-mounting solves the problem. I think a solution to the multiple names confusion would be to rename: /etc/apparmor.d/lxc/lxc-default-with-mounting to /etc/apparmor.d/lxc/lxc-container-default-with-mounting -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1296681 Title: failed to change apparmor profile to lxc-container-default To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1296681/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1296681] Re: failed to change apparmor profile to lxc-container-default
*** This bug is a duplicate of bug 1296459 *** https://bugs.launchpad.net/bugs/1296459 I seem to be seeing this issue as well. I'm not sure if its the duplicate issue. The profile config file name is lxc-default-with-mounting yet the actual profile name appears to be changed to lxc-container-default- with-mounting causing confusion. /etc/apparmor.d/lxc/lxc-default-with-mounting Inside that file the profile name is lxc-container-default-with- mounting. I presume that at some point the profile naming convention was changed from lxc-default to lxc-container-default but the file name didn't get changed to match the convention. This is confusing because if I configure the apparmor profile in the lxc config based on the config filename I'll get an error: lxc.aa_profile = lxc-default-with-mounting error: lxc-start: No such file or directory - failed to change apparmor profile to lxc-default-with-mounting using the actual profile name from inside the file lxc.aa_profile = lxc-container-default-with-mounting solves the problem. I think a solution to the multiple names confusion would be to rename: /etc/apparmor.d/lxc/lxc-default-with-mounting to /etc/apparmor.d/lxc/lxc-container-default-with-mounting -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1296681 Title: failed to change apparmor profile to lxc-container-default To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1296681/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1099115] Re: Can't change brightness while screen is locked
Is this a usability issue? I'd like to be able to turn off the backlight to listen to music in the dark. When I come back to turn the brightness up, the screen is locked and the brightness control doesn't work. I have to blindly enter in my password (yikes?). If I didn't realize that the screen was locked a reset would be the only fix. That doesn't seem very user friendly. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1099115 Title: Can't change brightness while screen is locked To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1099115/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1241666] Re: Cannot create simple streams for Ubuntu trusty series
running into the same error with juju -v bootstrap: $ juju -v bootstrap verbose is deprecated with the current meaning, use show-log 2013-11-13 05:07:24 INFO juju.environs open.go:156 environment info already exists; using New not Prepare 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:181 filtering tools by released version 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:85 reading tools with major.minor version 1.16 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:96 filtering tools by series: precise 2013-11-13 05:07:26 WARNING juju.cmd.juju bootstrap.go:204 no tools available, attempting to retrieve from https://juju-dist.s3.amazonaws.com/ 2013-11-13 05:07:26 INFO juju.environs.sync sync.go:66 listing available tools listing available tools 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:90 found 34 tools found 34 tools 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:94 found 13 recent tools (version 1.16.3) found 13 recent tools (version 1.16.3) 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:100 listing target bucket listing target bucket 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:113 found 13 tools in target; 0 tools to be copied found 13 tools in target; 0 tools to be copied 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:118 copied 0 tools copied 0 tools 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:120 generating tools metadata generating tools metadata 2013-11-13 05:07:46 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=fc0e8c4e-4c20-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:47 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=fe8c5cee-4c20-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:48 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=01545db4-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:48 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=67218400-4c17-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:49 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=03b0c336-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:50 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=6c28b6b2-4c17-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:50 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=062cf832-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:51 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=08e1d6a6-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:51 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=0b63deb0-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:52 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=0fd07d3c-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:53 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=126cbf74-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:53 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=14fdadf2-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:54 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=176c84d2-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:54 ERROR juju supercommand.go:282 invalid series trusty $ apt-cache policy juju juju: Installed: 1.16.0-0ubuntu1~ctools1 Candidate: 1.16.0-0ubuntu1~ctools1 Version table: *** 1.16.0-0ubuntu1~ctools1 0 500 http://ubuntu-cloud.archive.canonical.com/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 0.5+bzr531-0ubuntu1.3 0 500 http://10.0.0.1/ubuntu/ precise-updates/universe amd64 Packages 500 http://10.0.0.1/ubuntu/ precise-security/universe amd64 Packages 0.5+bzr531-0ubuntu1 0 500 http://10.0.0.1/ubuntu/ precise/universe amd64 Packages -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to juju-core in Ubuntu. https://bugs.launchpad.net/bugs/1241666 Title: Cannot create simple streams for Ubuntu trusty series To manage notifications about this bug go to: https://bugs.launchpad.net/juju-core/+bug/1241666/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com
[Bug 1241666] Re: Cannot create simple streams for Ubuntu trusty series
running into the same error with juju -v bootstrap: $ juju -v bootstrap verbose is deprecated with the current meaning, use show-log 2013-11-13 05:07:24 INFO juju.environs open.go:156 environment info already exists; using New not Prepare 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:181 filtering tools by released version 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:85 reading tools with major.minor version 1.16 2013-11-13 05:07:25 INFO juju.environs.tools tools.go:96 filtering tools by series: precise 2013-11-13 05:07:26 WARNING juju.cmd.juju bootstrap.go:204 no tools available, attempting to retrieve from https://juju-dist.s3.amazonaws.com/ 2013-11-13 05:07:26 INFO juju.environs.sync sync.go:66 listing available tools listing available tools 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:90 found 34 tools found 34 tools 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:94 found 13 recent tools (version 1.16.3) found 13 recent tools (version 1.16.3) 2013-11-13 05:07:27 INFO juju.environs.sync sync.go:100 listing target bucket listing target bucket 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:113 found 13 tools in target; 0 tools to be copied found 13 tools in target; 0 tools to be copied 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:118 copied 0 tools copied 0 tools 2013-11-13 05:07:45 INFO juju.environs.sync sync.go:120 generating tools metadata generating tools metadata 2013-11-13 05:07:46 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=fc0e8c4e-4c20-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:47 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=fe8c5cee-4c20-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:48 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=01545db4-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:48 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=67218400-4c17-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:49 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=03b0c336-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:50 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=6c28b6b2-4c17-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:50 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=062cf832-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:51 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=08e1d6a6-4c21-11e3-b375-525400c5247eop=get_by_key 2013-11-13 05:07:51 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=0b63deb0-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:52 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=0fd07d3c-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:53 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=126cbf74-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:53 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=14fdadf2-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:54 INFO juju.environs.tools simplestreams.go:293 Fetching tools to generate hash: http://10.0.0.4/MAAS/api/1.0/files/?key=176c84d2-4c21-11e3-a44c-525400c5247eop=get_by_key 2013-11-13 05:07:54 ERROR juju supercommand.go:282 invalid series trusty $ apt-cache policy juju juju: Installed: 1.16.0-0ubuntu1~ctools1 Candidate: 1.16.0-0ubuntu1~ctools1 Version table: *** 1.16.0-0ubuntu1~ctools1 0 500 http://ubuntu-cloud.archive.canonical.com/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 0.5+bzr531-0ubuntu1.3 0 500 http://10.0.0.1/ubuntu/ precise-updates/universe amd64 Packages 500 http://10.0.0.1/ubuntu/ precise-security/universe amd64 Packages 0.5+bzr531-0ubuntu1 0 500 http://10.0.0.1/ubuntu/ precise/universe amd64 Packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1241666 Title: Cannot create simple streams for Ubuntu trusty series To manage notifications about this bug go to: https://bugs.launchpad.net/juju-core/+bug/1241666/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com
[Bug 1240972] [NEW] maas dhcp.conf template not adding ignore-client-uids unless using raring or later
Public bug reported: 1. Description of the problem: The maas dhcpd.conf.template only adds ignore-client-uids if using raring or later. Packages in the cloud-tools archive should work on precise and require this option for dhcpd. I have verified that dhcpd starts after adding ignore-client-uids root@maas1000:~# cat /etc/maas/templates/dhcp/dhcpd.conf.template ... subnet {{subnet}} netmask {{subnet_mask}} { filename {{bootloader}}; {{if platform_codename = 'raring'}} ignore-client-uids true; {{endif}} option subnet-mask {{subnet_mask}}; 2. Ubuntu release, software version, Release Number and Architecture of the selected components. root@maas1000:/etc/maas/templates/dhcp# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 12.04.3 LTS Release:12.04 Codename: precise root@maas1000:~# apt-cache policy maas-cluster-controller maas-cluster-controller: Installed: 1.4+bzr1693+dfsg-0ubuntu2~ctools0 Candidate: 1.4+bzr1693+dfsg-0ubuntu2~ctools0 Version table: *** 1.4+bzr1693+dfsg-0ubuntu2~ctools0 0 500 http://10.0.0.1/ubuntu-cloud/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 1.2+bzr1373+dfsg-0ubuntu1~12.04.2 0 500 http://10.0.0.1/ubuntu/ precise-updates/main amd64 Packages root@maas1000:~# apt-cache policy isc-dhcp-server isc-dhcp-server: Installed: 4.2.4-7ubuntu8~ctools0 Candidate: 4.2.4-7ubuntu8~ctools0 Version table: *** 4.2.4-7ubuntu8~ctools0 0 500 http://10.0.0.1/ubuntu-cloud/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 4.1.ESV-R4-0ubuntu5.9 0 500 http://10.0.0.1/ubuntu/ precise-updates/main amd64 Packages 4.1.ESV-R4-0ubuntu5.5 0 500 http://10.0.0.1/ubuntu/ precise-security/main amd64 Packages 4.1.ESV-R4-0ubuntu5 0 500 http://10.0.0.1/ubuntu/ precise/main amd64 Packages root@maas1000:~# ** Affects: maas (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to maas in Ubuntu. https://bugs.launchpad.net/bugs/1240972 Title: maas dhcp.conf template not adding ignore-client-uids unless using raring or later To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/maas/+bug/1240972/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1240972] [NEW] maas dhcp.conf template not adding ignore-client-uids unless using raring or later
Public bug reported: 1. Description of the problem: The maas dhcpd.conf.template only adds ignore-client-uids if using raring or later. Packages in the cloud-tools archive should work on precise and require this option for dhcpd. I have verified that dhcpd starts after adding ignore-client-uids root@maas1000:~# cat /etc/maas/templates/dhcp/dhcpd.conf.template ... subnet {{subnet}} netmask {{subnet_mask}} { filename {{bootloader}}; {{if platform_codename = 'raring'}} ignore-client-uids true; {{endif}} option subnet-mask {{subnet_mask}}; 2. Ubuntu release, software version, Release Number and Architecture of the selected components. root@maas1000:/etc/maas/templates/dhcp# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 12.04.3 LTS Release:12.04 Codename: precise root@maas1000:~# apt-cache policy maas-cluster-controller maas-cluster-controller: Installed: 1.4+bzr1693+dfsg-0ubuntu2~ctools0 Candidate: 1.4+bzr1693+dfsg-0ubuntu2~ctools0 Version table: *** 1.4+bzr1693+dfsg-0ubuntu2~ctools0 0 500 http://10.0.0.1/ubuntu-cloud/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 1.2+bzr1373+dfsg-0ubuntu1~12.04.2 0 500 http://10.0.0.1/ubuntu/ precise-updates/main amd64 Packages root@maas1000:~# apt-cache policy isc-dhcp-server isc-dhcp-server: Installed: 4.2.4-7ubuntu8~ctools0 Candidate: 4.2.4-7ubuntu8~ctools0 Version table: *** 4.2.4-7ubuntu8~ctools0 0 500 http://10.0.0.1/ubuntu-cloud/ubuntu/ precise-updates/cloud-tools/main amd64 Packages 100 /var/lib/dpkg/status 4.1.ESV-R4-0ubuntu5.9 0 500 http://10.0.0.1/ubuntu/ precise-updates/main amd64 Packages 4.1.ESV-R4-0ubuntu5.5 0 500 http://10.0.0.1/ubuntu/ precise-security/main amd64 Packages 4.1.ESV-R4-0ubuntu5 0 500 http://10.0.0.1/ubuntu/ precise/main amd64 Packages root@maas1000:~# ** Affects: maas (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1240972 Title: maas dhcp.conf template not adding ignore-client-uids unless using raring or later To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/maas/+bug/1240972/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1179610] Re: poor performance of resize2fs on 12.04
Thanks Scott, yeah we tried the raring image and saw a 200x improvement. We booted a precise and raring image to compare and precise took 200sec for the resize while raring took 1.2sec. We're doing all of our testing with a raring instance right now. I don't have a urgent need for precise but it is quite a bit slower for the initial boot. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1179610 Title: poor performance of resize2fs on 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/1179610/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1179610] Re: poor performance of resize2fs on 12.04
noting I'm using the current precise cloud image: http://cloud-images.ubuntu.com/precise/20130926/ I'll have to confirm the resize2fs version. If there is any other details that would be helpful let me know. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1179610 Title: poor performance of resize2fs on 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/1179610/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1179610] Re: poor performance of resize2fs on 12.04
I'll potentially try a raring image to see if there is any difference -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1179610 Title: poor performance of resize2fs on 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/1179610/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1179610] Re: poor performance of resize2fs on 12.04
I'm seeing slow resizefs from cloud-init.log when booting from volume, where the volume is 100G ceph rbd. I'm seeing high IO on ceph during this time even though I'm booting one instance at a time with a 20 disk ceph cluster. Is resize2fs an expensive operation? 2013-09-26 08:15:17,092 - cc_resizefs.py[DEBUG]: resize took 4269.06579185 seconds -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1179610 Title: poor performance of resize2fs on 12.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/e2fsprogs/+bug/1179610/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1069570] Re: 1 MAC Address, two IPs - DNS is out of sync with DHCP leases databases
I see for precise-proposed, the patch is to add a 30 second lease for pxe agents. This is resulting the lease during pxe being added to the leases file with a 30 second expiration as expected, but the expiration is not being honored. We are seeing machines given the ip from the 30 second lease long after it had expired. It appears dhcpd is not respecting the 30 second lease and still giving the wrong ip to nodes. Example: Below are the leases for a machine that came up with the wrong ip. The lease for 172.21.66.24 is supposed to be for 30 seconds, but it appears it was not being respected, since the node would come up with .24 after rebooting long after the lease should be expired. host 172.21.66.24 { dynamic; hardware ethernet 52:54:00:e3:1d:47; fixed-address 172.21.66.24; } lease 172.21.66.24 { starts 4 2013/09/05 01:40:28; ends 4 2013/09/05 01:40:58; tstp 4 2013/09/05 01:40:58; cltt 4 2013/09/05 01:40:28; binding state free; hardware ethernet 52:54:00:e3:1d:47; uid \001RT\000\343\035G; } lease 172.21.66.29 { starts 4 2013/09/05 01:40:40; ends 4 2013/09/05 13:40:40; tstp 4 2013/09/05 13:40:40; cltt 4 2013/09/05 01:40:40; binding state active; next binding state free; hardware ethernet 52:54:00:e3:1d:47; client-hostname maas-enlist; } -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to maas in Ubuntu. https://bugs.launchpad.net/bugs/1069570 Title: 1 MAC Address, two IPs - DNS is out of sync with DHCP leases databases To manage notifications about this bug go to: https://bugs.launchpad.net/juju-core/+bug/1069570/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1069570] Re: 1 MAC Address, two IPs - DNS is out of sync with DHCP leases databases
I see for precise-proposed, the patch is to add a 30 second lease for pxe agents. This is resulting the lease during pxe being added to the leases file with a 30 second expiration as expected, but the expiration is not being honored. We are seeing machines given the ip from the 30 second lease long after it had expired. It appears dhcpd is not respecting the 30 second lease and still giving the wrong ip to nodes. Example: Below are the leases for a machine that came up with the wrong ip. The lease for 172.21.66.24 is supposed to be for 30 seconds, but it appears it was not being respected, since the node would come up with .24 after rebooting long after the lease should be expired. host 172.21.66.24 { dynamic; hardware ethernet 52:54:00:e3:1d:47; fixed-address 172.21.66.24; } lease 172.21.66.24 { starts 4 2013/09/05 01:40:28; ends 4 2013/09/05 01:40:58; tstp 4 2013/09/05 01:40:58; cltt 4 2013/09/05 01:40:28; binding state free; hardware ethernet 52:54:00:e3:1d:47; uid \001RT\000\343\035G; } lease 172.21.66.29 { starts 4 2013/09/05 01:40:40; ends 4 2013/09/05 13:40:40; tstp 4 2013/09/05 13:40:40; cltt 4 2013/09/05 01:40:40; binding state active; next binding state free; hardware ethernet 52:54:00:e3:1d:47; client-hostname maas-enlist; } -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1069570 Title: 1 MAC Address, two IPs - DNS is out of sync with DHCP leases databases To manage notifications about this bug go to: https://bugs.launchpad.net/juju-core/+bug/1069570/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1204507] Re: MAAS rejects empty files
verified that this resolved the 400 BAD REQUEST, during bootstrap -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to maas in Ubuntu. https://bugs.launchpad.net/bugs/1204507 Title: MAAS rejects empty files To manage notifications about this bug go to: https://bugs.launchpad.net/maas/+bug/1204507/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1204507] Re: MAAS rejects empty files
verified that this resolved the 400 BAD REQUEST, during bootstrap -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1204507 Title: MAAS rejects empty files To manage notifications about this bug go to: https://bugs.launchpad.net/maas/+bug/1204507/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 997172] Re: smbldap-config.pl not installed
To use the configure.pl (also named smbldap-config) you can download the source package and run the following commands to configure and run the script: $ apt-get source smbldap-tools $ perl ./smbldap-tools-0.9.7/smbldap-config.pl $ cd smbldap-tools-0.9.7/ $ ./configure $ make $ ./smbldap-config.cmd -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/997172 Title: smbldap-config.pl not installed To manage notifications about this bug go to: https://bugs.launchpad.net/serverguide/+bug/997172/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1023069] Re: Packages was corrupt
Expected Behavior: Installer continues without warning about a corrupt Packages file. Behavior actually encountered: During install a red warning screen appears with the following message: [!!] Install the base system Debootstrap warning Warning: http://192.168.0.1/ubuntu/dists/lucid/restricted/binary-amd64/Packages was corrupt Go Back Continue Pressing enter to continue allows the installer to continue installing. Reproduction steps: To reproduce this bug, create a pxe boot server and apt repo. Build a vm with 2 nics for the server. Configure the second nic (eth1) for a private network we will use to test netbooting the installer on a separate vm. Install Ubuntu with 10.04.04 amd64 alternate install cd for our server: http://releases.ubuntu.com/lucid/ubuntu-10.04.4-alternate-amd64.iso Boot Ubuntu and add the following lines to /etc/network/interfaces to configure eth1 with a static address replacing gateway with your internet gateway: auto eth1 iface eth1 inet static address 192.168.0.1 netmask 255.255.255.0 gateway 192.168.1.1 Reboot Ubuntu so that the second nic is configured at boot. Attach/insert the Ubuntu 10.04.04 cd to the vm so we can use it later. Install dnsmasq for dhcp and tftp servers: apt-get install dnsmasq Edit /etc/dnsmasq.conf adding the following lines to enable dhcp and tftp: dhcp-boot=pxelinux.0 dhcp-range=192.168.0.50,192.168.0.150,12h enable-tftp interface=eth1 Restart dnsmasq: service dnsmasq restart Mount the Ubuntu 10.04 cd’s install/tftpboot directory under /var/lib/tftpboot: mkdir /var/lib/tftpboot mount --bind /media/Ubuntu\ 10.04.4\ LTS\ amd64/install/netboot/ /var/lib/tftpboot Create pxe boot config file /root/mydefault containing the following lines: TIMEOUT 50 PROMPT 1 default netboot nabel netboot kernel ubuntu-installer/amd64/linux append vga=normal local=en_US setup/layoutcode=en_US console-setup/layoutcode=us initrd=ubuntu-installer/amd64/initrd.gz ks=http://192.168.0.1/ks.cfg Note above, ks=http://192.168.0.1/ks.cfg points to the kickstart file. Mount mydefault under /var/lib/tftpboot: mount --bind /root/mydefault /var/lib/tftpboot/pxelinux.cfg/default To set up apt repo, mount the Ubuntu cd under /var/www/ubuntu: mkdir -p /var/www/ubuntu mount --bind /media/Ubuntu\ 10.04.4\ LTS\ amd64/ /var/www/ubuntu Install apache to serve packages via http for apt repo: apt-get install apache2 Create the kickstart config file in /var/www/ks.cfg containing the following lines: ### # Installer Section ### #-- # Installation Options #-- # # Install OS in text mode # install text # # System Language # lang en_US langsupport en_US # # System Keyboard and Mouse Settings # keyboard us # # Timezone Setting # timezone America/Chicago #-- # License Key #-- key none url --url http://192.168.0.1/ubuntu/ network --device=eth0 --bootproto=dhcp --nameserver 8.8.8.8,8.8.4.4 rootpw --plaintext ubuntu user --disabled reboot firewall --disabled #-- # Partitions #-- bootloader --location=mbr zerombr clearpart --all --initlabel part / --fstype ext4 --size=1 --grow --asprimary part /boot --fstype ext4 --size=250 --asprimary part /var --fstype ext4 --size=5120 part /var/log --fstype ext4 --size=5120 part /var/log/audit --fstype ext4 --size=1024 part swap --size=4096 --asprimary #-- # Packages #-- %packages ubuntu-desktop %pre %post Boot a second vm instance via PXE. The installer should netboot and begin installing. A red screen will appear after while with the following warning: [!!] Install the base system Debootstrap warning Warning: http://192.168.0.1/ubuntu/dists/lucid/restricted/binary-amd64/Packages was corrupt Go Back Continue Pressing enter to continue allows the installer to continue installing. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1023069 Title: Packages was corrupt To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1023069/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1055658] Re: Under load, libvirt fails to start VMs concurrently
Verified in precise proposed using the breaklibvirt.sh from bug:961217. breaklibvirt.sh completes 100 rounds of starting and stopping 4 instances without failures after updating to http://launchpad.net/ubuntu/+source/libvirt/0.9.8-2ubuntu17.5 ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1055658 Title: Under load, libvirt fails to start VMs concurrently To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1055658/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1014872] Re: no debug symbols for mysql-server
If there are at least any thoughts that could help me continue debugging this problem that would be helpful. I'd like to submit a full backtrace to report a crash in Mysql. If I can build the debug symbols correctly without messing with the packaging, I can go that route as well. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1014872 Title: no debug symbols for mysql-server To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/1014872/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 931350] Re: vms missing after upgrade from Lucid to Precise
Hi, do we know if this fix will be made automatic so upgrading from 10.04 to 12.04 doesn't need a manual step? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/931350 Title: vms missing after upgrade from Lucid to Precise To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-release-notes/+bug/931350/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 951343] Re: [SRU] authentication fails silently with long pam_authz_search filter
Thanks guys, I was able to verify in natty as well using the reproduction steps ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/951343 Title: [SRU] authentication fails silently with long pam_authz_search filter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nss-pam-ldapd/+bug/951343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 951343] Re: [SRU] authentication fails silently with long pam_authz_search filter
Thanks Adam, I'll work in getting this verified -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/951343 Title: [SRU] authentication fails silently with long pam_authz_search filter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nss-pam-ldapd/+bug/951343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 649009] Re: apt-cacher-ng crashed with SIGSEGV in malloc()
We believe MALLOC_CHECK_=2 was set correctly and attached is the resulting backtrace after a crash. ** Attachment added: backtrace https://bugs.launchpad.net/ubuntu/+source/apt-cacher-ng/+bug/649009/+attachment/3226600/+files/backtrace -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/649009 Title: apt-cacher-ng crashed with SIGSEGV in malloc() To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/apt-cacher-ng/+bug/649009/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1014872] Re: no debug symbols for mysql-server
Any idea who might be able to help guide me with this? I haven't had luck yet compiling mysql-server with debug symbols. Although I've added -DWITH_DEBUG=1 to debian/rules build, when dh_strip runs it says that the packages have already been stripped. ddebs are not being built in /var/cache/pbuilder/result/. Based on that I think -DWITH_DEBUG=1 isn't taking effect. I confirmed -DWITH_DEBUG=1 is the correct option (http://dev.mysql.com/doc/refman//5.5/en/compiling-for- debugging.html). Any thoughts? Here's the steps I'm taking: # apt-get source mysql-server Add -DWITH_DEBUG=1 to debian/rules # grep -C2 DEBUG mysql-5.5-5.5.24/debian/rules -DWITH_ARCHIVE_STORAGE_ENGINE=ON \ -DWITH_BLACKHOLE_STORAGE_ENGINE=ON \ -DWITH_DEBUG=1 \ -DWITH_FEDERATED_STORAGE_ENGINE=ON \ -DWITH_EXTRA_CHARSETS=all ..' # pbuilder create --debootstrapopts --variant=buildd # pbuilder --update --extrapackages pkg-create-dbgsym # pbuilder build mysql-5.5_5.5.24-0ubuntu0.12.04.1.dsc 21 | tee /tmp/pbuildlog # grep strip /tmp/pbuildlog dh_strip -a dh_strip debug symbol extraction: all non-arch-all packages for this build platform amd64: libmysqlclient18 libmysqld-pic libmysqld-dev libmysqlclient-dev mysql-client-core-5.5 mysql-client-5.5 mysql-server-core-5.5 mysql-server-5.5 mysql-testsuite-5.5 mysql-source-5.5 dh_strip debug symbol extraction: packages to act on: libmysqlclient18 libmysqld-pic libmysqld-dev libmysqlclient-dev mysql-client-core-5.5 mysql-client-5.5 mysql-server-core-5.5 mysql-server-5.5 mysql-testsuite-5.5 mysql-source-5.5 dh_strip debug symbol extraction: ignored packages: libmysqlclient18 is already stripped, ignoring libmysqld-pic is already stripped, ignoring libmysqld-dev is already stripped, ignoring libmysqlclient-dev is already stripped, ignoring mysql-client-core-5.5 is already stripped, ignoring mysql-client-5.5 is already stripped, ignoring mysql-server-core-5.5 is already stripped, ignoring mysql-server-5.5 is already stripped, ignoring mysql-testsuite-5.5 is already stripped, ignoring mysql-source-5.5 is already stripped, ignoring -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1014872 Title: no debug symbols for mysql-server To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/1014872/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 951343] Re: [SRU] authentication fails silently with long pam_authz_search filter
Hi there, I confirmed the expected outcome of the increased buffer using the reproduction steps on Precise with proposed nslcd-0.8.4ubuntu0.1 ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/951343 Title: [SRU] authentication fails silently with long pam_authz_search filter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nss-pam-ldapd/+bug/951343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1014872] [NEW] no debug symbols for mysql-server
Public bug reported: Hi there, no debug symbols packages are available for mysql-server. Neither a mysql-server-dbg package is available or mysql-server-dbgsym from ddebs.ubuntu.com. According to xnox in #ubuntu-devel: 12:32 xnox there was a bug about it or something somewhere 12:32 xnox mattrae: basically the buildsystem unconditionally strips them / builds without them. I wasn't able to find a bug, so I created this one to track the problem. I've attempted 2 methods that work with other packages but not mysql. steps from here http://askubuntu.com/questions/41610/how-do-i-rebuild-a -package-to-include-debugging-information: apt-get install devscripts fakeroot apt-get build-dep mysql-server export DEB_BUILD_OPTIONS=debug nostrip noopt fakeroot apt-get source -b mysql-server and with pbuilder, building packages after installing pkg-create-dbgsym in the pbuilder chroot: apt-get source mysql-server pbuilder create --debootstrapopts --variant=buildd pbuilder --update --extrapackages pkg-create-dbgsym pbuilder build mysql-5.5_5.5.24-0ubuntu0.12.04.1.dsc ** Affects: mysql-5.5 (Ubuntu) Importance: High Status: Confirmed ** Affects: mysql-5.5 (Ubuntu Precise) Importance: High Status: Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1014872 Title: no debug symbols for mysql-server To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mysql-5.5/+bug/1014872/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 844369] Re: Backup to Ubuntu One failed (SSLError: The read operation timed out)
Hi, this problem is continuing to exhibit itself as of 4/22/2012. Reviewing this bug, the problem doesn't appear to be pinpointed quite yet. So far U1 servers have been restarted, the upstream bug linked to in #14 includes a patch to increase the timeout, and #15 suggests a bug when the folder synced is actually a symlink. Can anyone confirm? Is anybody else continuing to see this? Should there be a cleaner error message when the timeout occurs? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/844369 Title: Backup to Ubuntu One failed (SSLError: The read operation timed out) To manage notifications about this bug go to: https://bugs.launchpad.net/deja-dup/+bug/844369/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 951343] [NEW] authentication fails silently with long pam_authz_search filter
Public bug reported: Linux clients that use ldap authentication with nslcd and a long pam_authz_search filter will see authentication fail silently reproduction steps: modify entry for 127.0.1.1 in /etc/hosts so the example.com dc is used by slapd EX: x.x.x.x server1 change to: x.x.x.x server1.example.com server1 apt-get install nslcd # set search base dc=example,dc=com. then select all for services use ldap lookups when configuring libnss-ldapd. apt-get install slapd dpkg-reconfigure slapd # dns name example.com apt-get install migrationtools turn on ldap authentication using pam-auth-update stop nslcd and slapd. We'll start them in debug mode /etc/init.d/nslcd stop /etc/init.d/slapd stop migrate users to ldap. edit /etc/migrationtools/migrate_common.ph and change: $DEFAULT_MAIL_DOMAIN = example.com; $DEFAULT_BASE = dc=example,dc=com; then run commands to create ldif exports of group and passwd /usr/share/migrationtools/migrate_group.pl /etc/group ~/group.ldif /usr/share/migrationtools/migrate_passwd.pl /etc/passwd ~/passwd.ldif edit ~/people_group.ldif adding contents: dn: ou=People, dc=example, dc=com ou: People objectclass: organizationalUnit dn: ou=Group, dc=example, dc=com ou: Group objectclass: organizationalUnit import data into ldap: ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/people_group.ldif ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/group.ldif ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/passwd.ldif edit /etc/nslcd.conf adding pam_authz_search filter pam_authz_search ((objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)) open 2 new terminals and become root in one terminal run nslcd in debug mode: nslcd -d in second terminal run slapd in debug mode: slapd -d -1 in your original terminal attempt to sudo to a user other than root and watch the debug output in the slapd and nslcd terminals: sudo su ubuntu look for output in nslcd terminal DEBUG: trying pam_authz_search in nslcd terminal indicating filter is being used increase pam_authz_search filter beyond 1024 characters and note that you no longer see Trying pam_authz_search in the nslcd output and that authentication fails silently ** Affects: nss-pam-ldapd (Ubuntu) Importance: Undecided Status: New ** Description changed: Linux clients that use ldap authentication with nslcd and a long pam_authz_search filter will see authentication fail silently reproduction steps: modify entry for 127.0.1.1 in /etc/hosts so the example.com dc is used by slapd EX: x.x.x.x server1 change to: x.x.x.x server1.example.com server1 apt-get install nslcd # set search base dc=example,dc=com. then select all for services use ldap lookups when configuring libnss-ldapd. apt-get install slapd dpkg-reconfigure slapd # dns name example.com apt-get install migrationtools turn on ldap authentication using pam-auth-update stop nslcd and slapd. We'll start them in debug mode /etc/init.d/nslcd stop /etc/init.d/slapd stop migrate users to ldap. edit /etc/migrationtools/migrate_common.ph and change: $DEFAULT_MAIL_DOMAIN = example.com; $DEFAULT_BASE = dc=example,dc=com; then run commands to create ldif exports of group and passwd /usr/share/migrationtools/migrate_group.pl /etc/group ~/group.ldif /usr/share/migrationtools/migrate_passwd.pl /etc/passwd ~/passwd.ldif edit ~/people_group.ldif adding contents: dn: ou=People, dc=example, dc=com ou: People objectclass: organizationalUnit dn: ou=Group, dc=example, dc=com ou: Group objectclass: organizationalUnit import data into ldap: ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/people_group.ldif - ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/group.ldif - ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/passwd.ldif + ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/group.ldif + ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/passwd.ldif edit /etc/nslcd.conf adding
[Bug 951343] Re: authentication fails silently with long pam_authz_search filter
** Description changed: Linux clients that use ldap authentication with nslcd and a long pam_authz_search filter will see authentication fail silently + + $ lsb_release -rd + Description: Ubuntu 11.10 + Release: 11.10 + + version: + nss-pam-ldapd-0.7.13 + + expected: + Logging to indicate that the max filter length had been exceeded. + + actual: + authentication fails silently + + workaround: + Increase max filter length. char_filter_buffer in pam.c can be increased to 4096 bytes allowing for a longer search filter reproduction steps: modify entry for 127.0.1.1 in /etc/hosts so the example.com dc is used by slapd EX: x.x.x.x server1 change to: x.x.x.x server1.example.com server1 apt-get install nslcd # set search base dc=example,dc=com. then select all for services use ldap lookups when configuring libnss-ldapd. apt-get install slapd dpkg-reconfigure slapd # dns name example.com apt-get install migrationtools turn on ldap authentication using pam-auth-update stop nslcd and slapd. We'll start them in debug mode /etc/init.d/nslcd stop /etc/init.d/slapd stop migrate users to ldap. edit /etc/migrationtools/migrate_common.ph and change: $DEFAULT_MAIL_DOMAIN = example.com; $DEFAULT_BASE = dc=example,dc=com; then run commands to create ldif exports of group and passwd /usr/share/migrationtools/migrate_group.pl /etc/group ~/group.ldif /usr/share/migrationtools/migrate_passwd.pl /etc/passwd ~/passwd.ldif edit ~/people_group.ldif adding contents: dn: ou=People, dc=example, dc=com ou: People objectclass: organizationalUnit dn: ou=Group, dc=example, dc=com ou: Group objectclass: organizationalUnit import data into ldap: ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/people_group.ldif ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/group.ldif ldapadd -x -W -D cn=admin,dc=example,dc=com -f ~/passwd.ldif edit /etc/nslcd.conf adding pam_authz_search filter pam_authz_search ((objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)(objectClass=posixAccount)) open 2 new terminals and become root in one terminal run nslcd in debug mode: nslcd -d in second terminal run slapd in debug mode: slapd -d -1 in your original terminal attempt to sudo to a user other than root and watch the debug output in the slapd and nslcd terminals: sudo su ubuntu look for output in nslcd terminal DEBUG: trying pam_authz_search in nslcd terminal indicating filter is being used - increase pam_authz_search filter beyond 1024 characters and note that - you no longer see Trying pam_authz_search in the nslcd output and that + increase search string beyond 1024 buffer and note that we're no longer + seeing Trying pam_authz_search in the nslcd output and that authentication fails silently -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/951343 Title: authentication fails silently with long pam_authz_search filter To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nss-pam-ldapd/+bug/951343/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 933745] Re: Xvfb: any use of the XInput extension causes Xvfb to crash
confirmed the segfault in lucid following the steps to reproduce (xvfb 2:1.7.6-2ubuntu7.10). I've also confirmed that the xvfb version i'm using in oneiric does not have this issue (xvfb 2:1.10.4-1ubuntu4.2) in first terminal: raema@ubuntu:~$ Xvfb -ac :99 [dix] Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Backtrace: 0: Xvfb (xorg_backtrace+0x28) [0x558138] 1: Xvfb (0x40+0x15bd4d) [0x55bd4d] 2: /lib/libpthread.so.0 (0x7f1a60519000+0xf8f0) [0x7f1a605288f0] 3: /lib/libc.so.6 (0x7f1a5f1f3000+0x83052) [0x7f1a5f276052] 4: Xvfb (0x40+0xba96d) [0x4ba96d] 5: Xvfb (0x40+0xbac88) [0x4bac88] 6: Xvfb (0x40+0x10619c) [0x50619c] 7: Xvfb (0x40+0xf697a) [0x4f697a] 8: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7f1a5f211c4d] 9: Xvfb (0x40+0x1d389) [0x41d389] Segmentation fault at address (nil) Caught signal 11 (Segmentation fault). Server aborting raema@ubuntu:~$ in second terminal: raema@ubuntu:~$ DISPLAY=:99 xinput list XIO: fatal IO error 11 (Resource temporarily unavailable) on X server :99.0 after 16 requests (15 known processed) with 0 events remaining. ** Changed in: xorg-server (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/933745 Title: Xvfb: any use of the XInput extension causes Xvfb to crash To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/933745/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs