[Bug 1634451] Re: Screen flickers when booting ubuntu 16.10 on USB stick
I updated my 16.04 to 16.10 and have to confirm that flickering is still there and the text console is doing the same. I changed the kernel to 4.4 (from 16.04) and the flickering was gone. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1634451 Title: Screen flickers when booting ubuntu 16.10 on USB stick To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1634451/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1611899] [NEW] bug during installation of ubuntu 16.04, grub cannot be installed and installation crashes
Public bug reported: installation suddenly stopped as the grub couldn't be installed for an unknown region. the installation files were downloaded from the ubuntu website ProblemType: Bug DistroRelease: Ubuntu 16.04 Package: ubiquity 2.21.63.2 ProcVersionSignature: Ubuntu 4.4.0-31.50-generic 4.4.13 Uname: Linux 4.4.0-31-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.1 Architecture: amd64 CasperVersion: 1.376 Date: Wed Aug 10 19:51:10 2016 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 16.04.1 LTS "Xenial Xerus" - Release amd64 (20160719) ProcEnviron: LANGUAGE=fr_FR.UTF-8 PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=fr_FR.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ubiquity-2.21.63.2 ubuntu xenial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1611899 Title: bug during installation of ubuntu 16.04, grub cannot be installed and installation crashes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1611899/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1261248] [NEW] mga-vid module fails to build on kernels =3.4
Public bug reported: Relevant version information: mga-vid: 2.6.32-1 Kernel: 3.12.0-7-generic #15-Ubuntu SMP It is not possible to build the mga-vid module on kernels = 3.4. In kernel 3.4, asm/system.h was removed; this file is referred to by mga_vid.c and its absence causes the compilation to fail. Further, in kernel 3.7, VM_RESERVED was removed; this symbol is also referred to by mga_vid.c and its absence causes the compilation to fail. This compilation failure will occur on all versions of Ubuntu which use kernels = 3.4 by default, ie. everything from quantal onwards. To reproduce the bug, install mga-vid-source and execute sudo m-a a-i mga-vid on a system running a kernel =3.4 (=3.7 to see both failures). Below is a patch which resolves the problem. With this patch, the compilation succeeds; mga_vid_test produces the expected results; mplayer works fine; and I am getting 288fps from glxgears on a G450 with 16MB RAM. --- modules/mga-vid.orig/mga_vid.c 2010-05-18 14:16:10.0 +0100 +++ modules/mga-vid/mga_vid.c 2013-12-16 00:01:08.0 + @@ -52,6 +52,16 @@ #include linux/kernel.h #include linux/sched.h #include linux/mm.h +/* + * VM_RESERVED is not in kernels = 3.7 + * Bug fix cribbed from: + * http://lists.alioth.debian.org/pipermail/pkg-nvidia-devel/2013-January/008414.html + * https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=314e51b9851b4f4e8ab302243ff5a6fc6147f379 + * + */ +#if LINUX_VERSION_CODE = KERNEL_VERSION(3, 7, 0) +#define VM_RESERVED (VM_IO | VM_DONTEXPAND | VM_DONTDUMP) +#endif #include linux/string.h #include linux/errno.h @@ -70,7 +80,15 @@ #endif #include asm/uaccess.h +/* + * asm/system.h is not in kernels = 3.4 + * Bug fix cribbed from: + * https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/993506 + * + */ +#if LINUX_VERSION_CODE KERNEL_VERSION(3, 4, 0) #include asm/system.h +#endif #include asm/io.h #ifndef PCI_DEVICE_ID_MATROX_G200_PCI ** Affects: mga-vid (Ubuntu) Importance: Undecided Status: New ** Patch added: Patch to fix mga-vid module compilation failure on kernels = 3.4 https://bugs.launchpad.net/bugs/1261248/+attachment/3930024/+files/mga-vid.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1261248 Title: mga-vid module fails to build on kernels =3.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mga-vid/+bug/1261248/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1249696] Re: Mathematica crashes X on start in 13.10
Upgrading from nvidia-304 to nvidia-319 solved the problem for me too. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1249696 Title: Mathematica crashes X on start in 13.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1249696/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1249696] [NEW] Mathematica crashes X on start in 13.10
Public bug reported: Mathematica 9, on 13.10 with Gnome3, crashes X when launched (blanks screen; returns to login), whether or not -mesa or -opengl is provided. Mathematica 9 was working in 13.04 and started doing this right after upgrade to 13.10 (and Mathematica not changed) Xorg logs show nothing, as X crashes prevent loging. How to repeat: invoke mathematica. Repeatability: every time. ** Affects: xorg (Ubuntu) Importance: Undecided Status: New ** Tags: mathematica -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1249696 Title: Mathematica crashes X on start in 13.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1249696/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1210314] Re: get-flash-videos failing to download some BBC news videos (possibly other BBC videos too)
Yes, I rarely run the latest version of anything - I generally run the oldest version that will do what I want, to reduce clutter. I have just tried again using get-flash-videos version 1.25~git2012.06.27-1 for Saucy freshly downloaded from the Ubuntu website, and the same URL. Without the patch, this does still fail in the exact same manner as in my original report. With the patch applied, however, it succeeds - but today it retrieves an MP4 video over HTTP, whereas yesterday, for the same URL, it retrieved an FLV over RTMP, as shown above. This is the output from the patched version today: $ get_flash_videos --debug http://www.bbc.co.uk/news/uk-23626232 2 plugins installed: - Hulu.pm - Itv.pm Trying to open plugin ~/.get_flash_videos/plugins/Www.pm Trying to open plugin ~/.get_flash_videos/plugins/Bbc.pm Using method 'bbc' for http://www.bbc.co.uk/news/uk-23626232 Downloading http://www.bbc.co.uk/news/uk-23626232 - GET http://www.bbc.co.uk/news/uk-23626232 - 200 text/html text/html; charset=utf-8 (58275) - GET http://playlists.bbc.co.uk/news/uk-23626232A/playlist.sxml - 200 text/xml (4864) - GET http://open.live.bbc.co.uk/mediaselector/4/mtis/stream/p01dwkgh - 200 text/xml (5841) Downloading http://news.downloads.bbc.co.uk.edgesuite.net/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4?at=oBWKGaMw3f12418bb84241a43680b069d772c307acacb8dd4e38ab4135340... - GET http://news.downloads.bbc.co.uk.edgesuite.net/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4?at=oBWKGaMw3f12418bb84241a43680b069d772c307acacb8dd4e38ab4135340 1001225_h264_1500k.mp4: 100% (22667.88 / 22667.88 KiB)- 200 video/mp4 (0) Done. Saved 23211909 bytes to 1001225_h264_1500k.mp4 Obviously something has changed on the BBC website as while the content of the video is the same, the format is different from when I posted the original report. If you tried using the same URL as I did, then I would guess that maybe there was more than one change on the BBC website and at the time you tried to recreate it they were serving data which was compatible with the unpatched version. Or maybe you are not in the UK and it serves a different page outside the UK. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1210314 Title: get-flash-videos failing to download some BBC news videos (possibly other BBC videos too) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/get-flash-videos/+bug/1210314/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1210314] [NEW] get-flash-videos failing to download some BBC news videos (possibly other BBC videos too)
Public bug reported: System: Ubuntu 11.04 (but bug is not related to any other packages in system) Package: get-flash-videos 1.25~git2012.06.27-1 get-flash-videos is failing on certain videos from the BBC, apparently because of a change in the BBC web page code. Example output from failed run: $ get_flash_videos --debug http://www.bbc.co.uk/news/uk-23626232 2 plugins installed: - Hulu.pm - Itv.pm Trying to open plugin ~/.get_flash_videos/plugins/Www.pm Trying to open plugin ~/.get_flash_videos/plugins/Bbc.pm Using method 'bbc' for http://www.bbc.co.uk/news/uk-23626232 Downloading http://www.bbc.co.uk/news/uk-23626232 - GET http://www.bbc.co.uk/news/uk-23626232 - 200 text/html text/html; charset=utf-8 (58275) Error: Couldn't find BBC XML playlist URL in http://www.bbc.co.uk/news/uk-23626232 at /usr/share/perl5/FlashVideo/Site/Bbc.pm line 60. Couldn't extract Flash movie URL. This site may need specific support adding, or fixing. Please confirm the site is using Flash video and if you have Flash available check that the URL really works(!). Check for updates by running: /usr/bin/get_flash_videos --update If the latest version does not support this please open a bug (or contribute a patch!) at http://code.google.com/p/get-flash-videos/ make sure you include the output with --debug enabled. Couldn't download any videos. The following patch fixes this problem... $ diff -u /usr/share/perl5/FlashVideo/Site/Bbc.pm.orig /usr/share/perl5/FlashVideo/Site/Bbc.pm --- /usr/share/perl5/FlashVideo/Site/Bbc.pm.orig2013-08-08 23:18:52.0 +0100 +++ /usr/share/perl5/FlashVideo/Site/Bbc.pm 2013-08-08 22:56:07.0 +0100 @@ -18,6 +18,10 @@ if ($browser-content =~ /param name=playlist value=(http:.+?\.s?xml)/) { $playlist_xml = $1; } + elsif ($browser-content =~ /href:(http:[^]+?playlist\.s?xml)/) { +$playlist_xml = $1; +$playlist_xml =~ s/\\//g; + } elsif($browser-content =~ /empDivReady\s*\(([^)]+)/) { my @params = split /,\s*/, $1; Example output from the same URL with this patch applied: $ get_flash_videos --debug http://www.bbc.co.uk/news/uk-23626232 2 plugins installed: - Hulu.pm - Itv.pm Trying to open plugin ~/.get_flash_videos/plugins/Www.pm Trying to open plugin ~/.get_flash_videos/plugins/Bbc.pm Using method 'bbc' for http://www.bbc.co.uk/news/uk-23626232 Downloading http://www.bbc.co.uk/news/uk-23626232 - GET http://www.bbc.co.uk/news/uk-23626232 - 200 text/html text/html; charset=utf-8 (58275) Playlist URL: http://playlists.bbc.co.uk/news/uk-23626232A/playlist.sxml - GET http://playlists.bbc.co.uk/news/uk-23626232A/playlist.sxml - 200 text/xml (4864) - GET http://open.live.bbc.co.uk/mediaselector/4/mtis/stream/p01dwkgh - 200 text/xml (5841) FlashVideo::RTMPDownloader=HASH(0x9f22610) Running rtmpdump --verbose --pageUrl 'http://www.bbc.co.uk/news/uk-23626232' --app 'ondemand?_fcs_vhost=cp45413.edgefcs.netauth=daEdWclbWbVb4dTc4bmckdtdId9bFaIbzdC-bsbbn8-bWG-JpmEIoDoLEsGtxEaifp=v001slist=public/mps_h264_200/public/news/uk/1001000/1001225_h264_176k.mp4;public/mps_h264_400/public/news/uk/1001000/1001225_h264_512k.mp4;public/mps_h264_med/public/news/uk/1001000/1001225_h264_800k.mp4;public/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4' --tcUrl 'rtmp://cp45413.edgefcs.net/ondemand?_fcs_vhost=cp45413.edgefcs.netauth=daEdWclbWbVb4dTc4bmckdtdId9bFaIbzdC-bsbbn8-bWG-JpmEIoDoLEsGtxEaifp=v001slist=public/mps_h264_200/public/news/uk/1001000/1001225_h264_176k.mp4;public/mps_h264_400/public/news/uk/1001000/1001225_h264_512k.mp4;public/mps_h264_med/public/news/uk/1001000/1001225_h264_800k.mp4;public/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4' --swfUrl 'http://news.bbc.co.uk/player/emp/2.11.7978_8433/9player.swf' --rtmp 'rtmp://cp45413.edgefcs.net/on demand' --flv 'BBC_-_Co-op_supermarket_to_stop_selling_Nuts_magazine.flv' --playpath 'mp4:public/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4?auth=daEdWclbWbVb4dTc4bmckdtdId9bFaIbzdC-bsbbn8-bWG-JpmEIoDoLEsGtxEaifp=v001slist=public/mps_h264_200/public/news/uk/1001000/1001225_h264_176k.mp4;public/mps_h264_400/public/news/uk/1001000/1001225_h264_512k.mp4;public/mps_h264_med/public/news/uk/1001000/1001225_h264_800k.mp4;public/mps_h264_hi/public/news/uk/1001000/1001225_h264_1500k.mp4' RTMPDump v2.4 (c) 2010 Andrej Stepanchuk, Howard Chu, The Flvstreamer Team; license: GPL rtmpdump: DEBUG: Parsing... rtmpdump: DEBUG: Parsed protocol: 0 rtmpdump: DEBUG: Parsed host: cp45413.edgefcs.net rtmpdump: DEBUG: Parsed app : ondemand rtmpdump: DEBUG: Protocol : RTMP rtmpdump: DEBUG: Hostname : cp45413.edgefcs.net rtmpdump: DEBUG: Port : 1935 rtmpdump: DEBUG: Playpath :
[Bug 1210314] Re: get-flash-videos failing to download some BBC news videos (possibly other BBC videos too)
Er, yes, it is indeed a patch... :confused: -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1210314 Title: get-flash-videos failing to download some BBC news videos (possibly other BBC videos too) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/get-flash-videos/+bug/1210314/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 980491] [NEW] Pidgin sucking 100% CPU over multiple cores
Public bug reported: Whenever a new message occurs and the pidgin window does not have focus, CPU usage jumps at 100% (sometimes over multiple cores?), but falls back to 0 when window gets focus. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: pidgin 1:2.10.0-0ubuntu2 ProcVersionSignature: Ubuntu 3.0.0-17.30-generic 3.0.22 Uname: Linux 3.0.0-17-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 1.23-0ubuntu4 Architecture: amd64 Date: Fri Apr 13 00:02:15 2012 ExecutablePath: /usr/bin/pidgin InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) SourcePackage: pidgin UpgradeStatus: Upgraded to oneiric on 2011-10-22 (173 days ago) ** Affects: pidgin (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug apport-lpi oneiric -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/980491 Title: Pidgin sucking 100% CPU over multiple cores To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/980491/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 980491] Re: Pidgin sucking 100% CPU over multiple cores
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/980491 Title: Pidgin sucking 100% CPU over multiple cores To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pidgin/+bug/980491/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 785537] [NEW] Montreal shows location as America/Toronto
Public bug reported: Binary package hint: tzdata Ubuntu 11.04. Montreal shows America/Toronto instead of Americas/Montreal. ** Affects: tzdata (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/785537 Title: Montreal shows location as America/Toronto -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 539353] [NEW] Install crashed
Public bug reported: Binary package hint: ubiquity Had recently burned and checked live disc. Have copied syslog and partman files below. Install seemed to be about 80% done when received this message: We're sorry; the installer crashed. Please file a new bug report at https://launchpad.net/ubuntu/+source/ubiquity/+filebug (do not attach your details to any existing bug) and a developer will attend to the problem as soon as possible. To help the developers understand what went wrong, include the following detail in your bug report, and attach the files /var/log/syslog and /var/log/partman: Traceback (most recent call last): File /usr/lib/ubiquity/bin/ubiquity, line 457, in module main(oem_config) File /usr/lib/ubiquity/bin/ubiquity, line 442, in main install(args[0], query=options.query) File /usr/lib/ubiquity/bin/ubiquity, line 245, in install ret = wizard.run() File /usr/lib/ubiquity/ubiquity/frontend/gtk_ui.py, line 467, in run self.progress_loop() File /usr/lib/ubiquity/ubiquity/frontend/gtk_ui.py, line 977, in progress_loop (ret, realtb)) RuntimeError: Install failed with exit code 1 Traceback (most recent call last): File /usr/share/ubiquity/install.py, line 2444, in module install.run() File /usr/share/ubiquity/install.py, line 406, in run self.configure_plugins(count) File /usr/share/ubiquity/install.py, line 1165, in configure_plugins raise InstallStepError(Plugin %s failed with code %s % (plugin.NAME, ret)) InstallStepError: Plugin language failed with code -7 === See attachment for syslog and partman files. ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New -- Install crashed https://bugs.launchpad.net/bugs/539353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 539353] Re: Install crashed
** Attachment added: Crash Report.rtf http://launchpadlibrarian.net/40985186/Crash%20Report.rtf -- Install crashed https://bugs.launchpad.net/bugs/539353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 539353] Re: Install crashed
Re-ran BIOS setup - Loaded fail safe defaults then left most settings unaltered. Removed a usb memory stick. Then rebooted from live cd. This time installation completed successfully. -- Install crashed https://bugs.launchpad.net/bugs/539353 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 15424] Re: Error while burning DVD-RWs: Input/output error
Have just encountered the same problem myself. Manifested itself as growisofs ceasing to function following an upgrade from gutsy to hardy (I hadn't tried to write a DVD for some time after the upgrade). Same problem occurred with the intrepid and jaunty versions of growisofs. Using TDK DVD-R media on a Philips PBDV1640P revision B3.4. After much messing around I discovered that omitting the -dvd-compat switch from the growisofs command line makes it work... so the command I ended up running was: $ growisofs -Z /dev/scd0=foo.iso Proof that it worked: $ md5sum foo.iso /dev/scd0 a7e18f22eb98f8d62caf1ffcb30c70dc foo.iso a7e18f22eb98f8d62caf1ffcb30c70dc /dev/scd0 dvdrecord didn't work either and I couldn't make it work; sample of output: $ dvdrecord -v driveropts=burnfree speed=1 dev=1,0,0 -dao foo.iso dvdrtools v0.3.1 Portions (C) 2002-2006 Ark Linux b...@arklinux.org This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. Based on: Cdrecord 1.11a15 (i486-pc-linux-gnu) Copyright (C) 1995-2001 J�g Schilling TOC Type: 1 = CD-ROM scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.5.34 Using libscg version 'bero-0.5a' dvdrecord: Warning: using inofficial version of libscg (bero-0.5a '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). Driveropts: 'burnfree' atapi: 1 Device type: Removable CD-ROM Version: 5 Response Format: 2 Capabilities : Vendor_info: 'PHILIPS ' Identifikation : 'PBDV1640P ' Revision : 'B3.4' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 688128 = 672 KB FIFO size : 4194304 = 4096 KB Track 01: data 4404 MB Total size: 5058 MB (501:08.05) = 2255104 sectors Lout start: 5058 MB (501:10/04) = 2255104 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type:unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 43392 Starting to write CD/DVD at speed 1 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. dvdrecord: Turning BURN-Free on Performing OPC... Sending CUE sheet... Starting new track at sector: 2255270 Track 01: 0 of 4404 MB written.dvdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 22 69 A6 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (logical block address out of range) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.006s timeout 200s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00 Writing time: 12.800s Fixating... Fixating time:0.007s dvdrecord: fifo had 64 puts and 1 gets. dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. Googling around the place reveals quite a lot of reports of this with the following characteristics in common: - It always strikes following an upgrade - CD recording still works, it's only DVDs that don't - Both growisofs and dvdrecord have problems, but different ones, and if a problem strikes one program it doesn't necessarily mean it'll strike the other - It affects users of all the main distributions - Upgrading the dvd tools never fixes it - Nor does anything else, and nobody seems to have a clue what's going on - Some people are misled into thinking it's a hardware fault as it disappears when they replace the drive with a totally different model. Nobody seems to have tried replacing the drive with a brand new example of the model they already have. I rather suspect that if they did they'd find it still didn't work. My suspicion is that the problem is actually in the kernel, not the tools, and affects particular models/revisions of DVD drive. Kernel here is 2.6.27-7-generic from ubuntu. -- Error while burning DVD-RWs: Input/output error https://bugs.launchpad.net/bugs/15424 You received this bug notification because you are a member of Ubuntu Bugs, which is a
[Bug 15424] Re: Error while burning DVD-RWs: Input/output error
Update: Making it work is more complicated than that. Omitting the -dvd-compat switch is not on its own enough to make it work. First it is necessary to attempt to burn using dvdrecord. This fails with the output posted above, but it does have some effect which allows an immediately-following invocation of growisofs on the same blank to succeed. So the winning sequence is: $ dvdrecord -v driveropts=burnfree speed=1 dev=1,0,0 -dao foo.iso (fails with above output) (leave blank in drive, do not perform any other dvd commands) $ growisofs -Z /dev/scd0=foo.iso (works). Using growisofs without the preceding dvdrecord invocation produces unrecovered read error messages initially but then appears to get itself going and start working; however the resulting DVD gives Input/output error when trying to read it. $ growisofs -Z /dev/scd0=foo.iso Executing 'builtin_dd if=foo.iso of=/dev/scd0 obs=32k seek=0' :-[ PERFORM OPC failed with SK=3h/UNRECOVERED READ ERROR]: Input/output error /dev/scd0: Current Write Speed is 16.4x1352KBps. 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 0/2905800704 ( 0.0%) @0x, remaining ??:?? RBU 100.0% UBU 0.0% 5537792/2905800704 ( 0.2%) @1.2x, remaining 384:03 RBU 100.0% UBU 9.5% 36405248/2905800704 ( 1.3%) @6.7x, remaining 61:44 RBU 100.0% UBU 85.7% 67764224/2905800704 ( 2.3%) @6.8x, remaining 34:54 RBU 100.0% UBU 85.7% (snip) 2859859968/2905800704 (98.4%) @8.0x, remaining 0:05 RBU 100.0% UBU 85.7% 2896756736/2905800704 (99.7%) @8.0x, remaining 0:01 RBU 27.0% UBU 85.7% builtin_dd: 1418848*2KB out @ average 6.0x1352KBps /dev/scd0: flushing cache /dev/scd0: updating RMA /dev/scd0: closing session $ md5sum foo.iso /dev/scd0 cebf6dc104ca39d8266fd14957c7c63d foo.iso md5sum: /dev/scd0: Input/output error -- Error while burning DVD-RWs: Input/output error https://bugs.launchpad.net/bugs/15424 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 339382] Re: Apple wired mini Aluminium keyboard not recognized
I have done some further testing: I will use F1 to F12 but I really mean the non-F keys that bear icons such as previous track, play/pause, etc. F1 and F2 both map to the same XF86BrightnessAdjust F3 maps to XF86AudioMute F4 maps to XF86AudioLowerVolume F5 maps to XF86AudioRaiseVolume F6 doesn't seems to be recognized at all. F7 maps to XF86Display F8 maps to 0xd7 F9 maps to 0xd8 F10 maps to 0xd9 F11 and F12 maps to (the PC-105 style) F11 and F12 keys. The eject button maps to 0xcc The correct mapping should be that F1 and F2 maps to XF86BrightnessAdjust F3 should map to ? (Exposé doesn't quite exist, maybe something convenient to invoke window picker?) F4 should map to ? (Something convenient to show sidget layer?) F5 and F6 are unmarked, but both should be detected as extra keys F7 should map to XF86AudioPrev F8 should map to XF86AudioPlay F9 should map to XF86AudioNext F10 should map to XF86AUdioMute F11 should map to XF86AudioLowerVolume F12 should map to XF86AudioRaiseVolume Eject should map to XF86Eject -- Apple wired mini Aluminium keyboard not recognized https://bugs.launchpad.net/bugs/339382 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 339382] Re: Apple wired mini Aluminium keyboard not recognized
Keys from F1 to F10 map to XF86 media keys (such as XF86AudioPause, etc.) with expected behavior (with pb_fnmode=1) that key alone yields the Apple / XF86media keys, and fn+key yields the F1...F10 keys. But F11 and F12 remain F11 and F12 regardless of whether or not you press fn ... they are not XF86AudioVolumeDn or XF86AudioVolumeUp. Except from that, the patch works correctly, fn+arrows yields home, end, pgup, pgdn, fn+delete yields the forward delete. At least the patch leaves the keyboard (quasi-)fully functional. Great Job Ryan Jiri ! -- Apple wired mini Aluminium keyboard not recognized https://bugs.launchpad.net/bugs/339382 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 339382] Re: Apple wired mini Aluminium keyboard not recognized
Austin Lund wrote: What version of Ubuntu are you using? ** Changed in: linux (Ubuntu) Sourcepackagename: None = linux 8.04.1 lts -- Apple wired mini Aluminium keyboard not recognized https://bugs.launchpad.net/bugs/339382 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 339382] Re: Apple wired mini Aluminium keyboard not recognized
8.04 LTS -- Apple wired mini Aluminium keyboard not recognized https://bugs.launchpad.net/bugs/339382 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 339382] [NEW] Apple wired mini Aluminium keyboard not recognized
Public bug reported: The new device with USB id 05ac:021d ( Apple Computer, Inc. , new wired mini keyboard) is not detected as an Apple keyboard and accordingly behaves incorrectly (it behaves as a PC-105 keyboard, which is not the default behavior for an Apple keyboard, in particular, it does not recognize the fn key which is quite essential for this keyboard: it disables pgup/pgdn/home/end which are only accessible through a fn+key combination). Also, the embedded hub with USB ID 05ac:1005 is not identified as a USB hub (although it works properly) ** Affects: ubuntu Importance: Undecided Status: New -- Apple wired mini Aluminium keyboard not recognized https://bugs.launchpad.net/bugs/339382 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 291743] [NEW] Fatal signal 6
Public bug reported: Binary package hint: ppp After upgrading to Itrepid (ppp 2.4.4rel-9ubuntu2 - 2.4.4rel-10ubuntu2) it became impossible to create pptp-tunnels. I changed nothing in configuration after upgrade. When I downgrade ppp to 2.4.4rel-9ubuntu2 everything works fine. The error is Fatal signal 6. How to track that down? What can it be? The full debug log of session: Oct 31 09:09:59 server pppd[78791]: Plugin radius.so loaded. Oct 31 09:09:59 server pppd[78791]: RADIUS plugin initialized. Oct 31 09:09:59 server pppd[78791]: Plugin radattr.so loaded. Oct 31 09:09:59 server pppd[78791]: RADATTR plugin initialized. Oct 31 09:09:59 server pptp[78791]: Plugin pptp.so loaded. Oct 31 09:09:59 server pptp[78791]: PPTP plugin version 0.7.13 compiled for pppd-2.4.4, linux-2.6.27.2 Oct 31 09:09:59 server pptp[78791]: pppd 2.4.4 started by root, uid 0 Oct 31 09:09:59 server pptp[78791]: using channel 4579 Oct 31 09:09:59 server pptp[78791]: Using interface ppp1 Oct 31 09:09:59 server pptp[78791]: Connect: ppp1 -- pptp (XXX.XXX.XXX.XXX) Oct 31 09:09:59 server pptp[78791]: sent [LCP ConfReq id=0x1 asyncmap 0x0 auth chap MS-v2 magic 0x123d78e2 pcomp accomp] Oct 31 09:09:59 server pptp[78791]: rcvd [LCP ConfReq id=0x0 mru 1400 magic 0x2043406c pcomp accomp callback CBCP] Oct 31 09:09:59 server pptp[78791]: sent [LCP ConfRej id=0x0 callback CBCP] Oct 31 09:09:59 server pptp[78791]: rcvd [LCP ConfReq id=0x1 mru 1400 magic 0x2043406c pcomp accomp] Oct 31 09:09:59 server pptp[78791]: sent [LCP ConfAck id=0x1 mru 1400 magic 0x2043406c pcomp accomp] Oct 31 09:10:02 server pptp[78791]: sent [LCP ConfReq id=0x1 asyncmap 0x0 auth chap MS-v2 magic 0x123d78e2 pcomp accomp] Oct 31 09:10:02 server pptp[78791]: rcvd [LCP ConfAck id=0x1 asyncmap 0x0 auth chap MS-v2 magic 0x123d78e2 pcomp accomp] Oct 31 09:10:02 server pptp[78791]: sent [LCP EchoReq id=0x0 magic=0x123d78e2] Oct 31 09:10:02 server pptp[78791]: sent [CHAP Challenge id=0xb4 7c4cf5ceec08ea00c4f49155a5414e02, name = pptpd] Oct 31 09:10:02 server pptp[78791]: rcvd [LCP Ident id=0x2 magic=0x2043406c MSRASV5.10] Oct 31 09:10:02 server pptp[78791]: rcvd [LCP Ident id=0x3 magic=0x2043406c MSRAS-0-NAME] Oct 31 09:10:02 server pptp[78791]: rcvd [LCP EchoRep id=0x0 magic=0x2043406c] Oct 31 09:10:02 server pptp[78791]: rcvd [CHAP Response id=0xb4 d3753acb5ccddf79415040021e69b2f8fe276eb935df54fea7dd10479ae45346ac491945899a4fdb00, name = some-login] Oct 31 09:10:02 server pptp[78791]: RADATTR plugin wrote 3 line(s) to file /var/run/radattr.ppp1. Oct 31 09:10:02 server pptp[78791]: sent [CHAP Success id=0xb4 S=F4F46C682887F63B3EA1184EA72E32FAB155BA50] Oct 31 09:10:02 server pptp[78791]: sent [IPCP ConfReq id=0x1 addr XXX.XXX.XXX.XXX] Oct 31 09:10:02 server pptp[78791]: rcvd [CCP ConfReq id=0x4 mppe +H -M -S -L -D +C] Oct 31 09:10:02 server pptp[78791]: sent [CCP ConfReq id=0x1] Oct 31 09:10:02 server pptp[78791]: sent [CCP ConfRej id=0x4 mppe +H -M -S -L -D +C] Oct 31 09:10:02 server pptp[78791]: rcvd [IPCP ConfReq id=0x5 addr 0.0.0.0 ms-dns1 0.0.0.0 ms-wins 0.0.0.0 ms-dns3 0.0.0.0 ms-wins 0.0.0.0] Oct 31 09:10:02 server pptp[78791]: sent [IPCP ConfRej id=0x5 ms-wins 0.0.0.0 ms-wins 0.0.0.0] Oct 31 09:10:02 server pptp[78791]: rcvd [IPCP ConfAck id=0x1 addr XXX.XXX.XXX.XXX] Oct 31 09:10:02 server pptp[78791]: rcvd [CCP ConfAck id=0x1] Oct 31 09:10:02 server pptp[78791]: rcvd [CCP TermReq id=0x6 [EMAIL PROTECTED]\315t\000\000\002\334] Oct 31 09:10:02 server pptp[78791]: sent [CCP TermAck id=0x6] Oct 31 09:10:02 server pptp[78791]: rcvd [IPCP ConfReq id=0x7 addr 0.0.0.0 ms-dns1 0.0.0.0 ms-dns3 0.0.0.0] Oct 31 09:10:02 server pptp[78791]: sent [IPCP ConfNak id=0x7 addr XXX.XXX.XXX.XXX ms-dns1 XXX.XXX.XXX.XXX ms-dns3 XXX.XXX.XXX.XXX] Oct 31 09:10:02 server pptp[78791]: rcvd [IPCP ConfReq id=0x8 addr XXX.XXX.XXX.XXX ms-dns1 XXX.XXX.XXX.XXX ms-dns3 XXX.XXX.XXX.XXX] Oct 31 09:10:02 server pptp[78791]: sent [IPCP ConfAck id=0x8 addr XXX.XXX.XXX.XXX ms-dns1 XXX.XXX.XXX.XXX ms-dns3 XXX.XXX.XXX.XXX] Oct 31 09:10:02 server pptp[78791]: found interface eth1 for proxy arp Oct 31 09:10:02 server pptp[78791]: local IP address XXX.XXX.XXX.XXX Oct 31 09:10:02 server pptp[78791]: remote IP address XXX.XXX.XXX.XXX Oct 31 09:10:02 server pptp[78791]: Fatal signal 6 ^ Oct 31 09:10:02 server pptp[78791]: RADATTR plugin removed file /var/run/radattr.ppp1. Oct 31 09:10:02 server pptp[78791]: Exit. lsb_release -rd Description:Ubuntu 8.10 Release:8.10 apt-cache policy ppp ppp: Installed: 2.4.4rel-10ubuntu2 Candidate: 2.4.4rel-10ubuntu2 Version table: *** 2.4.4rel-10ubuntu2 0 500 http://ua.archive.ubuntu.com intrepid/main Packages 100 /var/lib/dpkg/status ** Affects: ppp (Ubuntu) Importance: Undecided Status: New ** Description changed: Binary package hint: ppp After upgrading to Itrepid (ppp 2.4.4rel-9ubuntu2 - 2.4.4rel-10ubuntu2)
[Bug 263344] [NEW] kernel 2.6.24-19-Generic (AMD64) failed to install: tarball corrupted
Public bug reported: With ubuntu 8.04LTS, during automatic weekly upgrade update-manager reported that the downloaded kernel 2.6.24-19-generic (amd64) failed to install because of corrupted tarball. running sudo apt-get clean/update/upgrade then dpkg --configure -a recovered the error. (redownloaded the tarball.) ProblemType: Package Architecture: amd64 Date: Sun Aug 31 12:11:36 2008 DistroRelease: Ubuntu 8.04 ErrorMessage: ErrorMessage: corrupted filesystem tarfile - corrupted package archive NonfreeKernelModules: nvidia Package: linux-image-2.6.24-19-generic 2.6.24-19.36 [modified: lib/modules/2.6.24-19-generic/modules.pcimap lib/modules/2.6.24-19-generic/modules.dep lib/modules/2.6.24-19-generic/modules.ieee1394map lib/modules/2.6.24-19-generic/modules.usbmap lib/modules/2.6.24-19-generic/modules.isapnpmap lib/modules/2.6.24-19-generic/modules.seriomap lib/modules/2.6.24-19-generic/modules.alias lib/modules/2.6.24-19-generic/modules.symbols] PackageArchitecture: amd64 SourcePackage: linux Title: package linux-image-2.6.24-19-generic 2.6.24-19.36 [modified: lib/modules/2.6.24-19-generic/modules.pcimap lib/modules/2.6.24-19-generic/modules.dep lib/modules/2.6.24-19-generic/modules.ieee1394map lib/modules/2.6.24-19-generic/modules.usbmap lib/modules/2.6.24-19-generic/modules.isapnpmap lib/modules/2.6.24-19-generic/modules.seriomap lib/modules/2.6.24-19-generic/modules.alias lib/modules/2.6.24-19-generic/modules.symbols] failed to install/upgrade: Uname: Linux 2.6.24-19-generic x86_64 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- kernel 2.6.24-19-Generic (AMD64) failed to install: tarball corrupted https://bugs.launchpad.net/bugs/263344 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 263344] Re: kernel 2.6.24-19-Generic (AMD64) failed to install: tarball corrupted
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/17189800/Dependencies.txt ** Attachment added: VarLogDistupgradeAptautoinstfixuplog.gz http://launchpadlibrarian.net/17189801/VarLogDistupgradeAptautoinstfixuplog.gz ** Attachment added: VarLogDistupgradeAptlog.gz http://launchpadlibrarian.net/17189802/VarLogDistupgradeAptlog.gz ** Attachment added: VarLogDistupgradeApttermlog.gz http://launchpadlibrarian.net/17189804/VarLogDistupgradeApttermlog.gz ** Attachment added: VarLogDistupgradeMainlog.gz http://launchpadlibrarian.net/17189806/VarLogDistupgradeMainlog.gz ** Attachment added: VarLogDistupgradeMainprereqlog.gz http://launchpadlibrarian.net/17189807/VarLogDistupgradeMainprereqlog.gz ** Attachment added: VarLogDistupgradeTermlog.gz http://launchpadlibrarian.net/17189808/VarLogDistupgradeTermlog.gz -- kernel 2.6.24-19-Generic (AMD64) failed to install: tarball corrupted https://bugs.launchpad.net/bugs/263344 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 205885] [NEW] missing sim icons
Public bug reported: Binary package hint: sim The sim (actually sim-data) package in Hardy misses some data, e.g. icons and sounds. Compare the contents of gutsy and hardy versions of sim-data: http://packages.ubuntu.com/gutsy/all/sim-data/filelist vs http://packages.ubuntu.com/hardy/all/sim-data/filelist The packages I used were: sim (0.9.4.3-0ubuntu1) and sim-data (0.9.4.3-0ubuntu1) [EMAIL PROTECTED]:~# lsb_release -rd Description:Ubuntu hardy (development branch) Release:8.04 How to fix: copy the contents of gutsy sim-data package over hardy sim- data package in /usr/share/. ** Affects: sim (Ubuntu) Importance: Undecided Status: New -- missing sim icons https://bugs.launchpad.net/bugs/205885 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155530] Re: Cannot print on Gutsy Gibbon with HP DeskJet 720C
It has randomly decided to fail again. cupsys is still at 1.3.2-1ubuntu7.5 No change to error messages in log - ie. still getting eg. [489581.995636] audit(1200938082.483:38): type=1502 operation=inode_permission requested_mask=rw denied_mask=rw name=/dev/tty pid=9861 profile=/usr/sbin/cupsd in /var/log/syslog - which is the same as was happening yesterday when it was working. Nothing at all in /var/log/cups/error_log. Setting aa-complain /usr/sbin/cupsd makes no difference. But as before, switching to the gutenprint driver instead of foomatic makes it work. (Printer, as before, is HP LJ3). -- Cannot print on Gutsy Gibbon with HP DeskJet 720C https://bugs.launchpad.net/bugs/155530 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155530] Re: Cannot print on Gutsy Gibbon with HP DeskJet 720C
Not been on this system for a while so I haven't updated the sources config, I've just updated from the standard sources, which now have themselves been updated to include cupsys 1.3.2-1ubuntu7.5. The foomatic/ljet3 now works again and there's nothing in /var/log/cups/error_log but I'm still getting errors like this in /var/log/syslog: type=1503 operation=inode_permission requested_mask=rw denied_mask=rw name=/dev/tty pid=4472 profile=/usr/sbin/cupsd -- Cannot print on Gutsy Gibbon with HP DeskJet 720C https://bugs.launchpad.net/bugs/155530 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155530] Re: Cannot print on Gutsy Gibbon with HP DeskJet 720C
This bug or something very similar has just bitten me out of the blue with a Hewlett-Packard LaserJet III on Gutsy. Before today the printer was working fine with the foomatic (recommended) driver. About an hour ago I tried to print and it failed with the identical apparmor messages in the log: droitwix kernel: [stamp] audit(stamp): type=1502 operation=inode_permission requested_mask=rw denied_mask=rw name=/dev/tty pid=foo profile=/usr/sbin/cupsd Since I last tried to print - which was a few days ago - there has been an update including various CUPS packages, and a PDF file generator virtual printer has appeared out of nowhere :-) in the CUPS printers listing. I deleted that and the HPLJ3, leaving me with no printers, restarted CUPS, and recreated the entry for the HPLJ3, but it made no difference. Disabling apparmor with sudo aa-complain cups made no difference either, it still didn't work. Removing /etc/apparmor.d/usr.sbin.cupsd entirely and restarting apparmor got rid of the error messages in the log but I still couldn't print, now it just failed silently. What did get it working was to reconfigure the printer to use the gutenprint driver instead of foomatic. Now it works fine with no error messages (and apparmor back to enforce mode), but it is a LOT slower (the box is a 450MHz PII with 320MB RAM and usually uses 200MB-300MB of swap, so perhaps more modern machinery would not notice, but in general ubuntu runs remarkably well despite the slowness of the box; with the foomatic driver, when that was working, printing was acceptably quick, but now that I have to use gutenprint it groans, and other applications become unresponsive for significant/annoying pauses while it prints). cupsys on this box is now at 1.3.2-1ubuntu7.3 - is it possible that the update that fixes the above bug has broken something else? -- Cannot print on Gutsy Gibbon with HP DeskJet 720C https://bugs.launchpad.net/bugs/155530 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs