I have a similar problem with my PCMCIA cardit worked perfectly
under 8.04 but now cannot see the router.
Here is a printout:
[EMAIL PROTECTED]:~$ sudo lshw -C Network
*-network
description: Ethernet interface
product: 3c556B CardBus [Tornado]
vendor: 3Com Corporation
physical id: 3
bus info: [EMAIL PROTECTED]:00:03.0
logical name: eth0
version: 20
serial: 00:04:76:60:6f:87
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd
100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=3c59x duplex=half
latency=64 link=no maxlatency=10 mingnt=10 module=3c59x multicast=yes port=MII
speed=10MB/s
*-network DISABLED
description: Wireless interface
product: ACX 111 54Mbps Wireless Interface
vendor: Texas Instruments
physical id: 1
bus info: [EMAIL PROTECTED]:06:00.0
logical name: wlan0
version: 00
serial: 00:0f:3d:57:76:56
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=acx_pci latency=64 module=acx multicast=yes
wireless=IEEE 802.11b+/g+
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: d2:f8:de:93:ae:85
capabilities: ethernet physical
configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A
link=yes multicast=yes
[EMAIL PROTECTED]:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge [8086:7190] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge [8086:7191] (rev 03)
00:02.0 CardBus bridge [0607]: Texas Instruments PCI1450 [104c:ac1b] (rev 03)
00:02.1 CardBus bridge [0607]: Texas Instruments PCI1450 [104c:ac1b] (rev 03)
00:03.0 Ethernet controller [0200]: 3Com Corporation 3c556B CardBus [Tornado]
[10b7:6056] (rev 20)
00:03.1 Communication controller [0780]: 3Com Corporation Mini PCI 56k Winmodem
[10b7:1007] (rev 20)
00:05.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30
[CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110]
(rev 02)
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01)
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB
[8086:7112] (rev 01)
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 03)
01:00.0 VGA compatible controller [0300]: S3 Inc. 86C270-294 Savage/IX-MV
[5333:8c12] (rev 13)
06:00.0 Network controller [0280]: Texas Instruments ACX 111 54Mbps Wireless
Interface [104c:9066]
[EMAIL PROTECTED]:~$ dmseg | grep -e iwl -e wlan -e rt -e ath
bash: dmseg: command not found
[EMAIL PROTECTED]:~$ dmesg | grep -e iwl -e wlan -e rt -e ath
[ 0.00] Movable zone start PFN for each node
[ 0.00] ACPI: PM-Timer IO Port: 0x1008
[ 0.00] Allocating PCI resources starting at 3000 (gap:
2000:dff8)
[ 0.00] Enabling unmasked SIMD FPU exception support... done.
[ 0.004000] virtual kernel memory layout:
[ 0.881353] Booting paravirtualized kernel on bare hardware
[ 1.365536] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.626629] ACPI: EC: driver started in interrupt mode
[ 1.628743] pci :00:02.0: supports D1
[ 1.628753] pci :00:02.0: supports D2
[ 1.628764] pci :00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.628864] pci :00:02.1: supports D1
[ 1.628873] pci :00:02.1: supports D2
[ 1.628883] pci :00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.628959] PCI: :00:03.0 reg 10 io port: [1800, 18ff]
[ 1.629065] pci :00:03.0: supports D1
[ 1.629074] pci :00:03.0: supports D2
[ 1.629085] pci :00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.629149] PCI: :00:03.1 reg 10 io port: [2000, 20ff]
[ 1.629243] pci :00:03.1: supports D2
[ 1.629254] pci :00:03.1: PME# supported from D0 D2 D3hot D3cold
[ 1.629413] pci :00:05.0: supports D1
[ 1.629422] pci :00:05.0: supports D2
[ 1.629561] PCI: :00:07.1 reg 20 io port: [1c00, 1c0f]
[ 1.629659] PCI: :00:07.2 reg 20 io port: [1c20, 1c3f]
[ 1.630050] pci :01:00.0: supports D1
[ 1.630060] pci :01:00.0: supports D2
[ 1.672879] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.804694] system 00:02: ioport range 0x1000-0x103f has been reserved
[ 1.804709] system 00:02: ioport range 0x1040-0x104f has been reserved
[ 1.804725] system 00:02: ioport range 0xfe00-0xfe0f has been reserved
[ 1.804778] system 00:09: ioport range 0x15e0-0x15ef has been reserved
[ 1.848667] bus: 00 index 0 io port: [0, ]
[ 1.848730] bus: 02 index 0 io port: [1400, 14ff]
[ 1.848741] bus: 02 index 1 io port: [2400, 24ff]
[ 1.848774] bus: 06 index 0 io port: [2800, 28ff]
[ 1.848784] bus: 06 index 1 io port: [2c00, 2cff]
[ 4.290293] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 4.320603] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.320626]
