[ovirt-users] 答复: Engine is still unreachable

[Xie, Chao]

Hi, Chou
 It seems your rhevm is not setup successfully. I suggest you can think 
about the two possible root cause below:
 1. your /etc/hosts about host/rhevm-vm is configured correctly?
 2. your password set in hosted-engine –deploy and rhevm-setup is same ?

If those are not your problem cause, Please provide more log about it.

发件人: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 Coffee Chou
发送时间: 2014年11月19日 10:08
收件人: Sandvik Agustin
抄送: users@ovirt.org
主题: Re: [ovirt-users] Engine is still unreachable

Hi, can you access Engine webadmin with this ERROR message?

2014-11-18 19:45 GMT+08:00 Sandvik Agustin 
mailto:agustinsand...@gmail.com>>:
Hi!,


I have install ovirt 3.4 on centos 6.6 following this documentation 
http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/

I have already completed the installation of ovirt engine inside of the vm, 
when going back to hosted-engine --deploy terminal and choosing 1 the 
hosted-engine --deploy says:

(1, 2, 3)[1]: 1
[ ERROR ] Engine is still unreachable
  Engine health status page is not yet reachable.
  To continue make a selection from the options below:
  (1) Continue setup - engine installation is complete
  (2) Power off and restart the VM
  (3) Abort setup


what should I do? how to fix this?


Thanks in advance,
sandvik

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] 答复: Engine is still unreachable

[Coffee Chou]

Hi, Chao
You may make a mistake, that's not my setup :-)
But i don't think it's a problem of password. If the passwords were not
the same, it will throw an ERROR of:
[ ERROR ] Cannot automatically add the host to cluster None: HTTP Status
401
[ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to
cluster None


so, i guess, maybe Sandvik's setup is still not accessable ?

2014-11-19 11:12 GMT+08:00 Xie, Chao :

>  Hi, Chou
>
>  It seems your rhevm is not setup successfully. I suggest you can
> think about the two possible root cause below:
>
>  1. your /etc/hosts about host/rhevm-vm is configured correctly?
>
>  2. your password set in hosted-engine –deploy and rhevm-setup is
> same ?
>
>
>
> If those are not your problem cause, Please provide more log about it.
>
>
>
> *发件人:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *代表 *Coffee
> Chou
> *发送时间:* 2014年11月19日 10:08
> *收件人:* Sandvik Agustin
> *抄送:* users@ovirt.org
> *主题:* Re: [ovirt-users] Engine is still unreachable
>
>
>
> Hi, can you access Engine webadmin with this ERROR message?
>
>
>
> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin :
>
> Hi!,
>
>
>
>
>
> I have install ovirt 3.4 on centos 6.6 following this documentation
> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>
>
>
> I have already completed the installation of ovirt engine inside of the
> vm, when going back to hosted-engine --deploy terminal and choosing 1
> the hosted-engine --deploy says:
>
>
>
> (1, 2, 3)[1]: 1
>
> [ ERROR ] Engine is still unreachable
>
>   Engine health status page is not yet reachable.
>
>   To continue make a selection from the options below:
>
>   (1) Continue setup - engine installation is complete
>
>   (2) Power off and restart the VM
>
>   (3) Abort setup
>
>
>
>
>
> what should I do? how to fix this?
>
>
> Thanks in advance,
>
> sandvik
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] 答复: Engine is still unreachable

[Sandvik Agustin]

Hi users,

Chou, here's my I already tried your suggestion right now, but it still
failed, here's my engine.log and vdsm.log. and one more thing, since the
time that I started the installation of ovirt-hosted-engine setup, I
starting to have this kind of error message on my /var/log/message.


Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target
to table
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
error getting device
Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding target
to table
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
remove


Thanks in advance
Sandvik

On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou  wrote:

> Hi, Sandvik
> it's just a suggestion:-)
>
> i think you can have a try, as i don't know my solution worked or not.
> maybe there are some other people who have encountered this problem before
> and they can give you some advice:-)
>
> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin :
>
>> HI Chou,
>>
>>
>> Thanks, I will try your solution now, and should I resend this email to
>> users@ovirt.org?
>>
>>
>> Thanks
>> Sandvik
>>
>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou 
>> wrote:
>>
>>> Hi, Sandvik
>>> and please don't send the email to me only but to user mail list, so
>>> everybody can help you :-)
>>>
>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou :
>>>
 Hi, Sandvik
 i can see the ERROR message: Command returned failure code 1 during
 SSH session  you can try these:

 1. stop firewall on the hosted_engine_1
 2. running command: vdsm-tool configure

 if it's still failure, please attach your engine.log and vdsm.log



 2014-11-20 7:55 GMT+08:00 Sandvik Agustin :

> Hi Chou,
>
>
> I have successfully install the hosted engine, but at the end of the
> installation I have this kind of error message
>
>  To continue make a selection from the options below:
>   (1) Continue setup - engine installation is complete
>   (2) Power off and restart the VM
>   (3) Abort setup
>
>   (1, 2, 3)[1]:
> [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
>   Enter the name of the cluster to which you want to add the
> host (Default) [Default]:
> [ INFO  ] Waiting for the host to become operational in the engine.
> This may take several minutes...
> [ ERROR ] The VDSM host was found in a failed state. Please check
> engine and bootstrap installation logs.
> [ ERROR ] Unable to add hosted_engine_1 to the manager
>   Please shutdown the VM allowing the system to launch it as a
> monitored service.
>   The system will wait until the VM is down.
> [ INFO  ] Enabling and starting HA services
>   Hosted Engine successfully set up
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file
> '/etc/ovirt-hosted-engine/answers.conf'
> [ INFO  ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been
> updated
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
>
> The ovirt webadmin is accessible, but my hosted_engine_1 status
> failed. I tried to activate it inside the webadmin, but it say's Error
> while executing action:
>
> hosted_engine_1:
>
>- Cannot activate Host. Host has no unique id.
>
>
> and when I try to reinstall it on the webadmin, nothing happen it
> still failed status.
>
> I hope you can help me.
>
> Please see attach for screenshot.
>
>
> Thanks in advance.
> sandvik
>
> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
> agustinsand...@gmail.com> wrote:
>
>> Hi guys,
>>
>> First of all I want to thank you for replying my email.
>> @Chou, yes I can access the engine webadmin.
>> @Chao, I've tried the no. 1 option and it worked, when I check my
>> /etc/hosts I have hostname conflict, then the ovirt engine is now
>> reachable, but there's another error message, it say's invalid 
>> certificate.
>> Is this because of I've put different FQDN during the installation 
>> process?
>>
>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou 
>> wrote:
>>
>>> Hi, Chao
>>> You may make a m

Re: [ovirt-users] 答复: Engine is still unreachable

[Sandvik Agustin]

Hi,

I'm sorry I forgot, here's the attachement.

On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou  wrote:

> Hi, Sandvik
> maybe you forgot to attach your log~ that's ovirt-hosted-engine-setup,
> so you can also attach your setup log:-)
>
> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin :
>
>> Hi users,
>>
>> Chou, here's my I already tried your suggestion right now, but it still
>> failed, here's my engine.log and vdsm.log. and one more thing, since the
>> time that I started the installation of ovirt-hosted-engine setup, I
>> starting to have this kind of error message on my /var/log/message.
>>
>>
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
>> error getting device
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>> target to table
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2: multipath:
>> error getting device
>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>> target to table
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered, can't
>> remove
>>
>>
>> Thanks in advance
>> Sandvik
>>
>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou 
>> wrote:
>>
>>> Hi, Sandvik
>>> it's just a suggestion:-)
>>>
>>> i think you can have a try, as i don't know my solution worked or
>>> not. maybe there are some other people who have encountered this problem
>>> before and they can give you some advice:-)
>>>
>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin :
>>>
 HI Chou,


 Thanks, I will try your solution now, and should I resend this email to
 users@ovirt.org?


 Thanks
 Sandvik

 On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou 
 wrote:

> Hi, Sandvik
> and please don't send the email to me only but to user mail list,
> so everybody can help you :-)
>
> 2014-11-20 9:17 GMT+08:00 Coffee Chou :
>
>> Hi, Sandvik
>> i can see the ERROR message: Command returned failure code 1
>> during SSH session  you can try these:
>>
>> 1. stop firewall on the hosted_engine_1
>> 2. running command: vdsm-tool configure
>>
>> if it's still failure, please attach your engine.log and vdsm.log
>>
>>
>>
>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin :
>>
>>> Hi Chou,
>>>
>>>
>>> I have successfully install the hosted engine, but at the end of the
>>> installation I have this kind of error message
>>>
>>>  To continue make a selection from the options below:
>>>   (1) Continue setup - engine installation is complete
>>>   (2) Power off and restart the VM
>>>   (3) Abort setup
>>>
>>>   (1, 2, 3)[1]:
>>> [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
>>>   Enter the name of the cluster to which you want to add the
>>> host (Default) [Default]:
>>> [ INFO  ] Waiting for the host to become operational in the engine.
>>> This may take several minutes...
>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>> engine and bootstrap installation logs.
>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>   Please shutdown the VM allowing the system to launch it as
>>> a monitored service.
>>>   The system will wait until the VM is down.
>>> [ INFO  ] Enabling and starting HA services
>>>   Hosted Engine successfully set up
>>> [ INFO  ] Stage: Clean up
>>> [ INFO  ] Generating answer file
>>> '/etc/ovirt-hosted-engine/answers.conf'
>>> [ INFO  ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has
>>> been updated
>>> [ INFO  ] Stage: Pre-termination
>>> [ INFO  ] Stage: Termination
>>>
>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>> while executing action:
>>>
>>> hosted_engine_1:
>>>
>>>- Cannot activate Host. Host has no unique id.
>>>
>>>
>>> and when I try to reinstall it on the webadmin, nothing happen it
>>> still failed status.
>>>
>>> I hope you can help me.
>>>
>>> Please see attach for screenshot.
>>>
>>>
>>> Thanks in advance.
>>> sandvik
>>>
>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>> agustinsand...@gmail.com> wrote:
>>>

Re: [ovirt-users] 答复: Engine is still unreachable

[Coffee Chou]

Hi, Sandvik
I have read the engine.log, it shows:
Cannot find a valid baseurl for repo: base

can you show me your repo?

2014-11-21 12:21 GMT+08:00 Sandvik Agustin :

> Hi,
>
> I'm sorry I forgot, here's the attachement.
>
> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
> agustinsand...@gmail.com> wrote:
>
>> Hi,
>>
>> I'm sorry I forgot, here's the attachement.
>>
>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou 
>> wrote:
>>
>>> Hi, Sandvik
>>> maybe you forgot to attach your log~ that's
>>> ovirt-hosted-engine-setup, so you can also attach your setup log:-)
>>>
>>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin :
>>>
 Hi users,

 Chou, here's my I already tried your suggestion right now, but it still
 failed, here's my engine.log and vdsm.log. and one more thing, since the
 time that I started the installation of ovirt-hosted-engine setup, I
 starting to have this kind of error message on my /var/log/message.


 Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
 multipath: error getting device
 Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
 target to table
 Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
 multipath: error getting device
 Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
 target to table
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
 can't remove
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
 can't remove
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
 can't remove
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
 Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
 can't remove


 Thanks in advance
 Sandvik

 On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou 
 wrote:

> Hi, Sandvik
> it's just a suggestion:-)
>
> i think you can have a try, as i don't know my solution worked or
> not. maybe there are some other people who have encountered this problem
> before and they can give you some advice:-)
>
> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin :
>
>> HI Chou,
>>
>>
>> Thanks, I will try your solution now, and should I resend this email
>> to users@ovirt.org?
>>
>>
>> Thanks
>> Sandvik
>>
>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou 
>> wrote:
>>
>>> Hi, Sandvik
>>> and please don't send the email to me only but to user mail
>>> list, so everybody can help you :-)
>>>
>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou :
>>>
 Hi, Sandvik
 i can see the ERROR message: Command returned failure code 1
 during SSH session  you can try these:

 1. stop firewall on the hosted_engine_1
 2. running command: vdsm-tool configure

 if it's still failure, please attach your engine.log and
 vdsm.log



 2014-11-20 7:55 GMT+08:00 Sandvik Agustin >>> >:

> Hi Chou,
>
>
> I have successfully install the hosted engine, but at the end of
> the installation I have this kind of error message
>
>  To continue make a selection from the options below:
>   (1) Continue setup - engine installation is complete
>   (2) Power off and restart the VM
>   (3) Abort setup
>
>   (1, 2, 3)[1]:
> [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
>   Enter the name of the cluster to which you want to add
> the host (Default) [Default]:
> [ INFO  ] Waiting for the host to become operational in the
> engine. This may take several minutes...
> [ ERROR ] The VDSM host was found in a failed state. Please check
> engine and bootstrap installation logs.
> [ ERROR ] Unable to add hosted_engine_1 to the manager
>   Please shutdown the VM allowing the system to launch it
> as a monitored service.
>   The system will wait until the VM is down.
> [ INFO  ] Enabling and starting HA services
>   Hosted Engine successfully set up
> [ INFO  ] Stage: Clean up
> [ INFO  ] Generating answer file
> '/etc/ovirt-hosted-engine/answers.conf'
> [ INFO  ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has
> been updated
> [ INFO  ] Stage: Pre-termination
> [ INFO  ] Stage: Termination
>
> The ovirt webadmin is accessible, but my hosted_engine_1 status
> 

Re: [ovirt-users] 答复: Engine is still unreachable

[Sandvik Agustin]

Hi,


The repo that I have use if
http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from this
documentation http://www.ovirt.org/Quick_Start_Guide, because the repo that
this documentation
http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
--

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen , and
find us on Facebook  and Google+

.
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
--

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen , and
find us on Facebook  and Google+

.
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
--

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen , and
find us on Facebook  and Google+

.

On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou  wrote:

> Hi, Sandvik
> I have read the engine.log, it shows:
> Cannot find a valid baseurl for repo: base
>
> can you show me your repo?
>
> 2014-11-21 12:21 GMT+08:00 Sandvik Agustin :
>
>> Hi,
>>
>> I'm sorry I forgot, here's the attachement.
>>
>> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
>> agustinsand...@gmail.com> wrote:
>>
>>> Hi,
>>>
>>> I'm sorry I forgot, here's the attachement.
>>>
>>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou 
>>> wrote:
>>>
 Hi, Sandvik
 maybe you forgot to attach your log~ that's
 ovirt-hosted-engine-setup, so you can also attach your setup log:-)

 2014-11-21 11:11 GMT+08:00 Sandvik Agustin :

> Hi users,
>
> Chou, here's my I already tried your suggestion right now, but it
> still failed, here's my engine.log and vdsm.log. and one more thing, since
> the time that I started the installation of ovirt-hosted-engine setup, I
> starting to have this kind of error message on my /var/log/message.
>
>
> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
> multipath: error getting device
> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
> target to table
> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
> multipath: error getting device
> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
> target to table
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't remove
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't remove
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't remove
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
> can't remove
>
>
> Thanks in advance
> Sandvik
>
> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou 
> wrote:
>
>> Hi, Sandvik
>> it's just a suggestion:-)
>>
>> i think you can have a try, as i don't know my solution worked or
>> not. maybe there are some other people who have encountered this problem
>> before and they can give you some advice:-)
>>
>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin 
>> :
>>
>>> HI Chou,
>>>
>>>
>>> Thanks, I will try your solution now, and should I resend this email
>>> to users@ovirt.org?
>>>
>>>
>>> Thanks
>>> Sandvik
>>>
>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou 
>>> wrote:
>>>
 Hi, Sandvik
 and please don't send the email to me only but to user mail
 list, so everybody can help you :-)

 2014-11-20 9:17 GMT+08:00 Coffee Chou :

> Hi, Sandvik
> i can see the ERROR message: Command returned failure code 1
> during SSH session  you can try these:
>
> 1. stop firewall on the hosted_engine_1
> 2. running command: vdsm-tool configure
>
> if it's still failure, please attach your engine.log and
> vdsm.log
>>

Re: [ovirt-users] 答复: Engine is still unreachable

[Sandvik Agustin]

Hi users, chou,


Here's the output of the command

cat /etc/yum.repos.d/
cat: /etc/yum.repos.d/: Is a directory


 cat /etc/yum.repos.d/*
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS
updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Debug.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS
updates
# unless you are manually picking other mirrors.
#

# All debug packages from all the various CentOS-5 releases
# are merged into a single repo, split by BaseArch
#
# Note: packages in the debuginfo repo are currently not signed
#

[base-debuginfo]
name=CentOS-6 - Debuginfo
baseurl=http://debuginfo.centos.org/6/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6
enabled=0
[fasttrack]
name=CentOS-6 - fasttrack
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Media.repo
#
#  This repo can be used with mounted DVD media, verify the mount point for
#  CentOS-6.  You can use this repo and yum to install items directly off
the
#  DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
#  yum --enablerepo=c6-media [command]
#
# or for ONLY the media repo, do this:
#
#  yum --disablerepo=\* --enablerepo=c6-media [command]

[c6-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/
file:///media/cdrom/
file:///media/cdrecorder/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Vault.repo
#
# CentOS Vault holds packages from previous releases within the same CentOS
Version
# these are packages obsoleted by the current release and should usually not
# be used in production
#-

[C6.0-base]
name=CentOS-6.0 - Base
baseurl=http://vault.centos.org/6.0/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-updates]
name=CentOS-6.0 - Updates
baseurl=http://vault.centos.org/6.0/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-extras]
name=CentOS-6.0 - Extras
baseurl=http://vault.centos.org/6.0/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-contrib]
name=CentOS-6.0 - Contrib
baseurl=http://vault.centos.org/6.0/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-centosplus]
name=CentOS-6.0 - CentOSPlus
baseurl=http://vault.centos.org/6.0/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-

[C6.1-base]
name=CentOS-6.1 - Base
baseurl=http://vault.centos.org/6.1/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.1-updates]
name=CentOS-6.1 - Updates
baseurl=htt

Re: [ovirt-users] 答复: Engine is still unreachable

[Coffee Chou]

Hi, Sandvik
sorry, but i can't find out what's wrong now...

did you use ovirt-node or centos? and did you open sshd?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] 答复: Engine is still unreachable

[Sandvik Agustin]

Hi Chou,


I use CentOS 6.5 apply all updates then it is now CentOS 6.6, Yes, the port
for sshd is already open by default, I tried to connect ssh from
hosted-engine to host vice versa and the connection is successful using
root user and even with the standard user. Now I'm trying to install CentOS
6.6 as a host and the oVirt-engine with the different server that meets the
hardware minimum requirements of the oVIrt, but still, I hope someone can
help me with this promlem.


Thanks
sandvik

On Mon, Nov 24, 2014 at 10:58 AM, Coffee Chou  wrote:

> Hi, Sandvik
> sorry, but i can't find out what's wrong now...
>
> did you use ovirt-node or centos? and did you open sshd?
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users