Re: [Users] oVIrt 3.1 - Network Bonding
13 aug 2012 kl. 23.56 skrev Justin Clift: On 13/08/2012, at 10:55 PM, Ricardo Esteves wrote: Hi, I the attached picture net1.jpg i have my initial network configuration. Physical card (em1) with vlan 10 (em1.10) bridged to the ovirtmgmt with IP 192.168.10.25 and default gw 192.168.10.254. Now i want to bond em1 card with p1p1 card (attached picture net2.jpg) But if i fill the default gw it gives me this error: The default gateway should be set only on engine network. If i don't fill the default gw, when i click ok, i loose connection to the server and then after more or less 1 minute the server automaticaly reboots. Anyone had this kind of problem? Two thoughts here: ;) * The lose connection to the server bit sort of sounds like this bug: https://bugzilla.redhat.com/show_bug.cgi?id=838816 Reckon that's a match? * Aside from that, you might have to manually configure networking for the hosts from the command line. Using the normal Linux commands I mean, not oVirt specific ones. i.e. creating the bridging and everything manually. This is the approach I had to take last week when trying out Aeolus with oVirt 3.1. Network layer breaks when adding a 2nd interface, but was able to work around it by manually creating the bridges from cli, after having defined the logical networks in the oVirt Web UI. The configure things manually approach isn't all that documented either. I kind of stumbled my way through, by looking at the examples here: I second that! I just trial and errored my way through bond - vlan - bridge. Let´s just say that´s for people who are up for a challenge. But luckily, I´m one for sharing: Start by defining to load bonding at boot: # cat /etc/modprobe.d/bonding.conf EOF alias bond0 bonding EOF Then define the bond. This is LACP mode: # cat /etc/sysconfig/network-scripts/ifcfg-bond0 EOF DEVICE=bond0 NM_CONTROLLED=no USERCTL=no BOOTPROTO=none BONDING_OPTS=mode=4 miimon=100 TYPE=Ethernet MTU=9000 EOF Then enslave the physical NICs to the bond: # cat /etc/sysconfig/network-scripts/ifcfg-em1 EOF NM_CONTROLLED=no BOOTPROTO=none DEVICE=em1 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes EOF # cat /etc/sysconfig/network-scripts/ifcfg-em2 EOF NM_CONTROLLED=no BOOTPROTO=none DEVICE=em2 ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes EOF Then create VLAN interfaces ontop of the bond. In this example, I´m using VLAN ID 1 and 2: # cat /etc/sysconfig/network-scripts/ifcfg-bond0.1 EOF DEVICE=bond0.1 VLAN=yes BOOTPROTO=none NM_CONTROLLED=no BRIDGE=br1 MTU=1500 EOF # cat /etc/sysconfig/network-scripts/ifcfg-bond0.2 EOF DEVICE=bond0.2 VLAN=yes BOOTPROTO=none NM_CONTROLLED=no BRIDGE=ovirtmgmt MTU=9000 EOF Lastly, create the bridges ontop of the VLAN interfaces. The names, as I have understood it, can be whatever you want, but one needs to be called ovirtmgmt of course: # cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt EOF TYPE=Bridge NM_CONTROLLED=no BOOTPROTO=none DEVICE=ovirtmgmt ONBOOT=yes IPADDR=XXX.XXX.XXX.XXX NETMASK=255.255.255.0 EOF # cat /etc/sysconfig/network-scripts/ifcfg-br0 EOF TYPE=Bridge NM_CONTROLLED=no BOOTPROTO=none DEVICE=br0 ONBOOT=yes IPADDR=XXX.XXX.XXX.XXX NETMASK=255.255.255.0 EOF Gateway goes into: # cat /etc/sysconfig/network EOF GATEWAY=XXX.XXX.XXX.XXX EOF This way, you can have almost(4096) as many interfaces as you want with only two physical NICs. I also gave an example on how you tune Jumbo Frames to be active on some interfaces, and have regular windows size on the rest. Jumbo most only be active on interfaces that isn´t routed, since the default routing size is 1500. /Karli http://wiki.ovirt.org/wiki/Installing_VDSM_from_rpm#Configuring_the_bridge_Interface Is any of that helpful? Regards and best wishes, Justin Clift Best regards, Ricardo Esteves. -- Aeolus Community Manager http://www.aeolusproject.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.semailto:karli.sjob...@adm.slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt 3.1 and live snapshots
On 08/14/2012 08:22 AM, Karli Sjöberg wrote: 13 aug 2012 kl. 16.11 skrev Andrew Cathrow: - Original Message - From: Winfried de Heiden w...@dds.nl mailto:w...@dds.nl To: users@ovirt.org mailto:users@ovirt.org Sent: Monday, August 13, 2012 9:09:42 AM Subject: Re: [Users] ovirt 3.1 and live snapshots Hi All, Live snapshots is support from qemu 1.1. However, qemu 1.1 is not included in Fedora 17 or Ovirt-node. Besides the Virt-preview repo, when is qemu 1.1 expected? Effectively, there is still no live snapshot support in Ovirt 3.1 The oVirt 3.1 management platform supports live snapshots if you have a qemu release that does. Fedora *doesn't update it's qemu mid-release* - so you have 3 choices Thank you Andrew, that was a much clearer answer then was given before when I asked it. That was what I wanted to know. - use the virt-preview repo - wait for F18 When F17 was released, it took a while for oVirt to be available. Is it going to be more or less the same for F18? Hi Karli, can you please elaborate - ovirt 3.0 was part of F17. we are planning to push ovirt 3.1 to F18. (still probably missing the web parts due to missing deps, which you will need to install from an ovirt repo, rather than out of the box fedora). Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt 3.1 and live snapshots
14 aug 2012 kl. 08.07 skrev Itamar Heim: On 08/14/2012 08:22 AM, Karli Sjöberg wrote: 13 aug 2012 kl. 16.11 skrev Andrew Cathrow: - Original Message - From: Winfried de Heiden w...@dds.nlmailto:w...@dds.nl mailto:w...@dds.nl To: users@ovirt.orgmailto:users@ovirt.org mailto:users@ovirt.org Sent: Monday, August 13, 2012 9:09:42 AM Subject: Re: [Users] ovirt 3.1 and live snapshots Hi All, Live snapshots is support from qemu 1.1. However, qemu 1.1 is not included in Fedora 17 or Ovirt-node. Besides the Virt-preview repo, when is qemu 1.1 expected? Effectively, there is still no live snapshot support in Ovirt 3.1 The oVirt 3.1 management platform supports live snapshots if you have a qemu release that does. Fedora *doesn't update it's qemu mid-release* - so you have 3 choices Thank you Andrew, that was a much clearer answer then was given before when I asked it. That was what I wanted to know. - use the virt-preview repo - wait for F18 When F17 was released, it took a while for oVirt to be available. Is it going to be more or less the same for F18? Hi Karli, can you please elaborate - ovirt 3.0 was part of F17. we are planning to push ovirt 3.1 to F18. (still probably missing the web parts due to missing deps, which you will need to install from an ovirt repo, rather than out of the box fedora). Yes, I meant by using your repo to install, as instructed on ovirt.orghttp://ovirt.org website. On a sidenote, oVirt missing webadmin and userportal in F17 OOTB wasn´t at all what I expected when I read now shipping with oVirt in F17´s release notes, which got me very excited. But then I had a little WTF!? moment after install and noticed that you couldn´t actually do anything with it:) Besides scripting through API of course. But it left me feeling a little bit fooled, you know. With live snapshotting, it´s the same deal. There shouldn´t be any ifs to it. You have live snapshots if. Better to say straight up that live snapshotting will be supported after you have working release of oVirt for F18, in my opinion. And then say, But you can help us test it right now, if you enable the Virtualization Preview Repository. Make sure to buckle up. http://fedoraproject.org/wiki/Virtualization_Preview_Repository This repository is intended primarily as an aid to testing / early experimentation. It is not intended for 'production' deployment. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVIrt 3.1 - Network Bonding
On 14/08/2012, at 3:59 PM, Karli Sjöberg wrote: snip This way, you can have almost(4096) as many interfaces as you want with only two physical NICs. I also gave an example on how you tune Jumbo Frames to be active on some interfaces, and have regular windows size on the rest. Jumbo most only be active on interfaces that isn´t routed, since the default routing size is 1500. Oooohhh Aaaahhh... that's really nicely written out. :) Could you be convinced to make a wiki page for it? (just hoping :) Regards and best wishes, Justin Clift -- Aeolus Community Manager http://www.aeolusproject.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVIrt 3.1 - Network Bonding
14 aug 2012 kl. 08.30 skrev Justin Clift: On 14/08/2012, at 3:59 PM, Karli Sjöberg wrote: snip This way, you can have almost(4096) as many interfaces as you want with only two physical NICs. I also gave an example on how you tune Jumbo Frames to be active on some interfaces, and have regular windows size on the rest. Jumbo most only be active on interfaces that isn´t routed, since the default routing size is 1500. Oooohhh Aaaahhh... that's really nicely written out. :) Could you be convinced to make a wiki page for it? DIY? It´s just copy-pasting the instructions basically, but I would be honored to have contributed:) (just hoping :) Regards and best wishes, Justin Clift -- Aeolus Community Manager http://www.aeolusproject.org Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.semailto:karli.sjob...@adm.slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Storage domain does not exist
After an normal yum update i am unable to get one of the storage domains UP. My systems is running Centos 6.3. If I try to activate the domain in GUI I got following errors: - 2012-08-14 12:16:22,594 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock Acquired to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,610 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Running command: ActivateStorageDomainCommand internal: false. Entities affected : ID: 5de36f78-8303-401b-b6c3-e04091077f9e Type: Storage 2012-08-14 12:16:22,618 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock freed to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,709 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ActivateStorageDomainVDSCommand] (pool-5-thread-50) [539cbd7e] START, ActivateStorageDomainVDSCommand(storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, ignoreFailoverLimit = false, compatabilityVersion = null, storageDomainId = 5de36f78-8303-401b-b6c3-e04091077f9e), log id: 152cc8c3 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-50) [539cbd7e] Error code StorageDomainDoesNotExist and error message IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (pool-5-thread-50) [539cbd7e] IrsBroker::Failed::ActivateStorageDomainVDS due to: IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,058 ERROR [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,074 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command [id=6db5eb90-af14-43f7-8494-d59528a77c27]: Compensating CHANGED_STATUS_ONLY of org.ovirt.engine.core.common.businessentities.storage_pool_iso_map; snapshot: EntityStatusSnapshot [id=storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, storageId = 5de36f78-8303-401b-b6c3-e04091077f9e, status=InActive]. - Ho can I try to resolv it? Regards //Ricky 0xB88C0B63.asc Description: application/pgp-keys ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain does not exist
Hi Ricky can you please add the log of VDSM, also the full engine log. Regards, Maor On 08/14/2012 01:22 PM, Ricky Schneberger wrote: After an normal yum update i am unable to get one of the storage domains UP. My systems is running Centos 6.3. If I try to activate the domain in GUI I got following errors: - 2012-08-14 12:16:22,594 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock Acquired to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,610 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Running command: ActivateStorageDomainCommand internal: false. Entities affected : ID: 5de36f78-8303-401b-b6c3-e04091077f9e Type: Storage 2012-08-14 12:16:22,618 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock freed to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,709 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ActivateStorageDomainVDSCommand] (pool-5-thread-50) [539cbd7e] START, ActivateStorageDomainVDSCommand(storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, ignoreFailoverLimit = false, compatabilityVersion = null, storageDomainId = 5de36f78-8303-401b-b6c3-e04091077f9e), log id: 152cc8c3 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-50) [539cbd7e] Error code StorageDomainDoesNotExist and error message IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (pool-5-thread-50) [539cbd7e] IrsBroker::Failed::ActivateStorageDomainVDS due to: IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,058 ERROR [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,074 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command [id=6db5eb90-af14-43f7-8494-d59528a77c27]: Compensating CHANGED_STATUS_ONLY of org.ovirt.engine.core.common.businessentities.storage_pool_iso_map; snapshot: EntityStatusSnapshot [id=storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, storageId = 5de36f78-8303-401b-b6c3-e04091077f9e, status=InActive]. - Ho can I try to resolv it? Regards //Ricky ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Storage domain does not exist
Ricky, Try do the following : go to the meta data of the data storage (in the storage server go to {storage_domain_name}/##/dom_md/metadata) delete the chksum line _SHA_CKSUM= try to activate the storage domain again the DC (it should fail again) vdsm.log should print the computed cksum of the storage domain (Should be an error there which say Meta Data seal is broken (checksum mismatch) computed_cksum = ) copy the comuted chksum to the meta data (_SHA_CKSUM={new chksum number} try to activate it again. Hope it will fix that. Mean while I'm checking what caused the bug. Regards, Maor On 08/14/2012 02:53 PM, Ricky Schneberger wrote: Hi I attached the logs. //Ricky On 2012-08-14 12:56, Maor Lipchuk wrote: Hi Ricky can you please add the log of VDSM, also the full engine log. Regards, Maor On 08/14/2012 01:22 PM, Ricky Schneberger wrote: After an normal yum update i am unable to get one of the storage domains UP. My systems is running Centos 6.3. If I try to activate the domain in GUI I got following errors: - 2012-08-14 12:16:22,594 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock Acquired to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,610 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Running command: ActivateStorageDomainCommand internal: false. Entities affected : ID: 5de36f78-8303-401b-b6c3-e04091077f9e Type: Storage 2012-08-14 12:16:22,618 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Lock freed to object EngineLock [exclusiveLocks= key: org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand value: 5de36f78-8303-401b-b6c3-e04091077f9e 2012-08-14 12:16:22,709 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.ActivateStorageDomainVDSCommand] (pool-5-thread-50) [539cbd7e] START, ActivateStorageDomainVDSCommand(storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, ignoreFailoverLimit = false, compatabilityVersion = null, storageDomainId = 5de36f78-8303-401b-b6c3-e04091077f9e), log id: 152cc8c3 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.BrokerCommandBase] (pool-5-thread-50) [539cbd7e] Error code StorageDomainDoesNotExist and error message IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,050 ERROR [org.ovirt.engine.core.vdsbroker.irsbroker.IrsBrokerCommand] (pool-5-thread-50) [539cbd7e] IrsBroker::Failed::ActivateStorageDomainVDS due to: IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,058 ERROR [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand throw Vdc Bll exception. With error message VdcBLLException: org.ovirt.engine.core.vdsbroker.irsbroker.IRSErrorException: IRSGenericException: IRSErrorException: Failed to ActivateStorageDomainVDS, error = Storage domain does not exist: ('5de36f78-8303-401b-b6c3-e04091077f9e',) 2012-08-14 12:16:25,074 INFO [org.ovirt.engine.core.bll.storage.ActivateStorageDomainCommand] (pool-5-thread-50) [539cbd7e] Command [id=6db5eb90-af14-43f7-8494-d59528a77c27]: Compensating CHANGED_STATUS_ONLY of org.ovirt.engine.core.common.businessentities.storage_pool_iso_map; snapshot: EntityStatusSnapshot [id=storagePoolId = 64a0f560-b9a1-4c87-8a30-0967b4ce3c81, storageId = 5de36f78-8303-401b-b6c3-e04091077f9e, status=InActive]. - Ho can I try to resolv it? Regards //Ricky ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt 3.1 - Import ISO Domain
Hi, I'm trying to import an ISO domain, but i get this: Error: A Request to the Server failed with the following Status Code: 500 On vdsm log i have this: MountError: (32, ;mount.nfs: rpc.statd is not running but is required for remote locking.\nmount.nfs: Either use '-o nolock' to keep locks local, or start statd.\nmount.nfs: an incorrect mount option was specified\n) Can someone help please? Best regards, Ricardo Esteves. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt 3.1 : node installation fails with no reason
On 08/14/2012 01:18 PM, Vincent Miszczak wrote: Hello guys, I have upgraded both my engine and node from Fedora 16 to Fedora 17. I have added the 3.1 release repo to both servers. My engine is working as expected. Now I want to add my node to it, but it fails everytime I try (the GUI says “Install Failed”), despite the installation log on the node show that everything is OK. I’ve looked to everything I’ve think about, cannot find why this fails :/ [root@ovirt-engine ovirt-engine]# rpm -qa ovirt* ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch ovirt-engine-tools-common-3.1.0-2.fc17.noarch ovirt-release-fedora-4-2.noarch ovirt-engine-userportal-3.1.0-2.fc17.noarch ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch ovirt-engine-dbscripts-3.1.0-2.fc17.noarch ovirt-engine-3.1.0-2.fc17.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-engine-config-3.1.0-2.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-2.fc17.noarch ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch ovirt-engine-genericapi-3.1.0-2.fc17.noarch ovirt-engine-restapi-3.1.0-2.fc17.noarch ovirt-engine-notification-service-3.1.0-2.fc17.noarch ovirt-engine-setup-3.1.0-2.fc17.noarch ovirt-engine-backend-3.1.0-2.fc17.noarch [root@ovirt-engine ovirt-engine]# rpm -qa vds* vdsm-cli-4.10.0-6.fc17.noarch vdsm-python-4.10.0-6.fc17.x86_64 vdsm-bootstrap-4.10.0-6.fc17.noarch vdsm-reg-4.10.0-6.fc17.noarch vdsm-hook-vhostmd-4.9.3.2-0.fc17.noarch vdsm-4.10.0-6.fc17.x86_64 vdsm-debuginfo-4.10.0-6.fc17.x86_64 vdsm-debug-plugin-4.10.0-6.fc17.noarch vdsm-gluster-4.10.0-6.fc17.noarch vdsm-xmlrpc-4.10.0-6.fc17.noarch vdsm-rest-4.10.0-6.fc17.noarch vdsm-tests-4.10.0-6.fc17.noarch vdsm-hook-faqemu-4.10.0-6.fc17.noarch [root@ovirt-node-01]# rpm -qa vds* vdsm-cli-4.10.0-6.fc17.noarch vdsm-hook-vhostmd-4.9.3.2-0.fc17.noarch vdsm-4.10.0-6.fc17.x86_64 vdsm-debuginfo-4.10.0-6.fc17.x86_64 vdsm-xmlrpc-4.10.0-6.fc17.noarch vdsm-rest-4.10.0-6.fc17.noarch vdsm-bootstrap-4.10.0-6.fc17.noarch vdsm-reg-4.10.0-6.fc17.noarch vdsm-python-4.10.0-6.fc17.x86_64 vdsm-tests-4.10.0-6.fc17.noarch vdsm-debug-plugin-4.10.0-6.fc17.noarch vdsm-hook-faqemu-4.10.0-6.fc17.noarch vdsm-gluster-4.10.0-6.fc17.noarch On the node : Tue, 14 Aug 2012 12:00:57 DEBUG Start VDS Validation Tue, 14 Aug 2012 12:00:57 DEBUGEntered VdsValidation(subject = '192.168.3.24', random_num = 'c8008897-9996-43a0-a712-dbb99d72ed71', rev_num = 'None', installVirtualizationService = 'True', installGlusterService = 'False') Tue, 14 Aug 2012 12:00:57 DEBUGSetting up Package Sacks Tue, 14 Aug 2012 12:00:58 DEBUGHost properly registered with RHN/Satellite. Tue, 14 Aug 2012 12:00:58 DEBUGBSTRAP component='RHN_REGISTRATION' status='OK' message='Host properly registered with RHN/Satellite.'/ Tue, 14 Aug 2012 12:00:59 DEBUGAvailable VDSM matches requirements Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='VDSM_MAJOR_VER' status='OK' message='Available VDSM matches requirements'/ Tue, 14 Aug 2012 12:00:59 DEBUGvirtExplorer testing Tue, 14 Aug 2012 12:00:59 DEBUGCPU vendor is GenuineIntel Tue, 14 Aug 2012 12:00:59 DEBUGvirt support in cpu: True, in bios: True Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='VT_SVM' status='OK' processor='Intel' message='Server supports virtualization'/ Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='OS' status='OK' type='FEDORA' message='Supported platform version'/ Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='KERNEL' status='OK' version='3.5.1-1.fc17.x86_64' message='Supported kernel version: [~3.5.1~, ~1.f c17.x86_64~]'/ Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'elevator=deadline'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'processor.max_cstate=1'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGCheck required packages ... Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'SDL.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGSDL-1.2.14-16.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='REQ PACKAGES' status='OK' result='SDL.x86_64' message='SDL-1.2.14-16.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'bridge-utils.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGbridge-utils-1.5-3.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='REQ PACKAGES' status='OK' result='bridge-utils.x86_64' message='bridge-utils-1.5-3.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'mesa-libGLU.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGmesa-libGLU-8.0.3-3.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='REQ PACKAGES' status='OK' result='mesa-libGLU.x86_64'
Re: [Users] Ovirt 3.1 : node installation fails with no reason
Hi again, I have removed then added the node again : same result. The engine does not log anything (but it seems its log level is INFO, how can I activate DEBUG ?). VDSM does not log anything neither (and vdsm-reg folder is empty on both node and engine). -Message d'origine- De : Itamar Heim [mailto:ih...@redhat.com] Envoyé : mardi 14 août 2012 16:28 À : Vincent Miszczak Cc : users@ovirt.org Objet : Re: [Users] Ovirt 3.1 : node installation fails with no reason On 08/14/2012 01:18 PM, Vincent Miszczak wrote: Hello guys, I have upgraded both my engine and node from Fedora 16 to Fedora 17. I have added the 3.1 release repo to both servers. My engine is working as expected. Now I want to add my node to it, but it fails everytime I try (the GUI says Install Failed), despite the installation log on the node show that everything is OK. I've looked to everything I've think about, cannot find why this fails :/ [root@ovirt-engine ovirt-engine]# rpm -qa ovirt* ovirt-log-collector-3.1.0-0.git10d719.fc17.noarch ovirt-engine-tools-common-3.1.0-2.fc17.noarch ovirt-release-fedora-4-2.noarch ovirt-engine-userportal-3.1.0-2.fc17.noarch ovirt-image-uploader-3.1.0-0.git9c42c8.fc17.noarch ovirt-engine-dbscripts-3.1.0-2.fc17.noarch ovirt-engine-3.1.0-2.fc17.noarch ovirt-engine-sdk-3.1.0.4-1.fc17.noarch ovirt-engine-config-3.1.0-2.fc17.noarch ovirt-engine-webadmin-portal-3.1.0-2.fc17.noarch ovirt-iso-uploader-3.1.0-0.git1841d9.fc17.noarch ovirt-engine-genericapi-3.1.0-2.fc17.noarch ovirt-engine-restapi-3.1.0-2.fc17.noarch ovirt-engine-notification-service-3.1.0-2.fc17.noarch ovirt-engine-setup-3.1.0-2.fc17.noarch ovirt-engine-backend-3.1.0-2.fc17.noarch [root@ovirt-engine ovirt-engine]# rpm -qa vds* vdsm-cli-4.10.0-6.fc17.noarch vdsm-python-4.10.0-6.fc17.x86_64 vdsm-bootstrap-4.10.0-6.fc17.noarch vdsm-reg-4.10.0-6.fc17.noarch vdsm-hook-vhostmd-4.9.3.2-0.fc17.noarch vdsm-4.10.0-6.fc17.x86_64 vdsm-debuginfo-4.10.0-6.fc17.x86_64 vdsm-debug-plugin-4.10.0-6.fc17.noarch vdsm-gluster-4.10.0-6.fc17.noarch vdsm-xmlrpc-4.10.0-6.fc17.noarch vdsm-rest-4.10.0-6.fc17.noarch vdsm-tests-4.10.0-6.fc17.noarch vdsm-hook-faqemu-4.10.0-6.fc17.noarch [root@ovirt-node-01]# rpm -qa vds* vdsm-cli-4.10.0-6.fc17.noarch vdsm-hook-vhostmd-4.9.3.2-0.fc17.noarch vdsm-4.10.0-6.fc17.x86_64 vdsm-debuginfo-4.10.0-6.fc17.x86_64 vdsm-xmlrpc-4.10.0-6.fc17.noarch vdsm-rest-4.10.0-6.fc17.noarch vdsm-bootstrap-4.10.0-6.fc17.noarch vdsm-reg-4.10.0-6.fc17.noarch vdsm-python-4.10.0-6.fc17.x86_64 vdsm-tests-4.10.0-6.fc17.noarch vdsm-debug-plugin-4.10.0-6.fc17.noarch vdsm-hook-faqemu-4.10.0-6.fc17.noarch vdsm-gluster-4.10.0-6.fc17.noarch On the node : Tue, 14 Aug 2012 12:00:57 DEBUG Start VDS Validation Tue, 14 Aug 2012 12:00:57 DEBUGEntered VdsValidation(subject = '192.168.3.24', random_num = 'c8008897-9996-43a0-a712-dbb99d72ed71', rev_num = 'None', installVirtualizationService = 'True', installGlusterService = 'False') Tue, 14 Aug 2012 12:00:57 DEBUGSetting up Package Sacks Tue, 14 Aug 2012 12:00:58 DEBUGHost properly registered with RHN/Satellite. Tue, 14 Aug 2012 12:00:58 DEBUGBSTRAP component='RHN_REGISTRATION' status='OK' message='Host properly registered with RHN/Satellite.'/ Tue, 14 Aug 2012 12:00:59 DEBUGAvailable VDSM matches requirements Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='VDSM_MAJOR_VER' status='OK' message='Available VDSM matches requirements'/ Tue, 14 Aug 2012 12:00:59 DEBUGvirtExplorer testing Tue, 14 Aug 2012 12:00:59 DEBUGCPU vendor is GenuineIntel Tue, 14 Aug 2012 12:00:59 DEBUGvirt support in cpu: True, in bios: True Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='VT_SVM' status='OK' processor='Intel' message='Server supports virtualization'/ Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='OS' status='OK' type='FEDORA' message='Supported platform version'/ Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='KERNEL' status='OK' version='3.5.1-1.fc17.x86_64' message='Supported kernel version: [~3.5.1~, ~1.f c17.x86_64~]'/ Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'elevator=deadline'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'processor.max_cstate=1'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGCheck required packages ... Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'SDL.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGSDL-1.2.14-16.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGBSTRAP component='REQ PACKAGES' status='OK' result='SDL.x86_64' message='SDL-1.2.14-16.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q',
Re: [Users] New engine install on remote DB fails uuid-ossp extension is not loaded
On Aug 14, 2012, at 12:58 PM, Yair Zaslavsky wrote: On 08/14/2012 07:12 PM, Ian Levesque wrote: Hello, I'm trying to install oVirt 3.1, using an external postgres db running on RHEL6 (postgresql-server-8.4.12-1.el6_2.x86_64). I'm getting the following error during engine-setup: Error: uuid-ossp extension is not loaded into the DB. Verify with the DB admin that uuid-ossp extension is loaded into newly created databases and rerun the setup. The database log indicates: ERROR: function uuid_generate_v1() does not exist at character 8 HINT: No function matches the given name and argument types. You might need to add explicit type casts. STATEMENT: SELECT uuid_generate_v1(); I did some searching, and it appeared that I might need to add some postgres-contrib functions: psql -U postgres -d engine -f /usr/share/pgsql/contrib/uuid-ossp.sql Unfortunately, it appears that the install script wants to create a temporary database and expects these functions to exist on its newly-created temp DB, not an already-existing database. Indeed this step is required for postgresql 8.4.x (you have to install this script). I did not encounter an issue with this script. I ran psql -U postgres -d engine -f /usr/share/pgsql/contrib/uuid-ossp.sql And the script execution went smoothly (this scripts runs instructions of create or replace function so it is re-entrant). Can you please elaborate more on the error you're getting? Here's what the install log tells me: 2012-08-14 11:56:12::INFO::engine_validators::425::root:: Successfully created temp database on server cmcd-web. 2012-08-14 11:56:12::INFO::engine_validators::443::root:: Checking that uuid extension is loaded by default on the remote server 2012-08-14 11:56:12::DEBUG::common_utils::350::root:: running sql query 'SELECT uuid_generate_v1();' on db server: 'cmcd-web'. 2012-08-14 11:56:12::DEBUG::common_utils::286::root:: cmd = /usr/bin/psql -h cmcd-web -p 5432 -U ovirt -d ovirt_engine_test -c SELECT uuid_generate_v1(); 2012-08-14 11:56:12::DEBUG::common_utils::291::root:: output = 2012-08-14 11:56:12::DEBUG::common_utils::292::root:: stderr = ERROR: function uuid_generate_v1() does not exist So, the installer is trying to create a database ovirt_engine_test and succeeding. But until you run `psql -U postgres -d database_name -f /usr/share/pgsql/contrib/uuid-ossp.sql`, the function uuid_generate_v1() won't be available. Therefore, the temporary database the installer is using to determine compatibility fails. Ian ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt 3.1 : node installation fails with no reason
Hi, Manually uninstall libjpeg and install it. Then try to add it using the GUI. -Sharad Quoting Douglas Landgraf dougsl...@redhat.com: Hi Vicent, On 08/14/2012 06:18 AM, Vincent Miszczak wrote: Hello guys, I have upgraded both my engine and node from Fedora 16 to Fedora 17. I have added the 3.1 release repo to both servers. My engine is working as expected. Now I want to add my node to it, but it fails everytime I try (the GUI says Install Failed), despite the installation log on the node show that everything is OK. I've looked to everything I've think about, cannot find why this fails :/ The below logs are all that you have in /tmp/vds_* in the Node side? Could you please attach the log from engine? I am wondering what might happened. On the node : Tue, 14 Aug 2012 12:00:57 DEBUG Start VDS Validation Tue, 14 Aug 2012 12:00:57 DEBUGEntered VdsValidation(subject = '192.168.3.24', random_num = 'c8008897-9996-43a0-a712-dbb99d72ed71', rev_num = 'None', installVirtualizationService = 'True', installGlusterService = 'False') Tue, 14 Aug 2012 12:00:57 DEBUGSetting up Package Sacks Tue, 14 Aug 2012 12:00:58 DEBUGHost properly registered with RHN/Satellite. Tue, 14 Aug 2012 12:00:58 DEBUG BSTRAP component='RHN_REGISTRATION' status='OK' message='Host properly registered with RHN/Satellite.'/ Tue, 14 Aug 2012 12:00:59 DEBUGAvailable VDSM matches requirements Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='VDSM_MAJOR_VER' status='OK' message='Available VDSM matches requirements'/ Tue, 14 Aug 2012 12:00:59 DEBUGvirtExplorer testing Tue, 14 Aug 2012 12:00:59 DEBUGCPU vendor is GenuineIntel Tue, 14 Aug 2012 12:00:59 DEBUGvirt support in cpu: True, in bios: True Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='VT_SVM' status='OK' processor='Intel' message='Server supports virtualization'/ Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='OS' status='OK' type='FEDORA' message='Supported platform version'/ Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='KERNEL' status='OK' version='3.5.1-1.fc17.x86_64' message='Supported kernel version: [~3.5.1~, ~1.f c17.x86_64~]'/ Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'elevator=deadline'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG['/sbin/grubby', '--update-kernel', 'DEFAULT', '--args', 'processor.max_cstate=1'] Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUGCheck required packages ... Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'SDL.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGSDL-1.2.14-16.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='SDL.x86_64' message='SDL-1.2.14-16.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'bridge-utils.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGbridge-utils-1.5-3.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='bridge-utils.x86_64' message='bridge-utils-1.5-3.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'mesa-libGLU.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGmesa-libGLU-8.0.3-3.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='mesa-libGLU.x86_64' message='mesa-libGLU-8.0.3-3.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'openssl.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGopenssl-1.0.0j-2.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='openssl.x86_64' message='openssl-1.0.0j-2.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'm2crypto.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGm2crypto-0.21.1-8.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='m2crypto.x86_64' message='m2crypto-0.21.1-8.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'rsync.x86_64'] Tue, 14 Aug 2012 12:00:59 DEBUGrsync-3.0.9-2.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='REQ PACKAGES' status='OK' result='rsync.x86_64' message='rsync-3.0.9-2.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUGCheck VDS packages ... Tue, 14 Aug 2012 12:00:59 DEBUG['/usr/bin/rpm', '-q', 'qemu-kvm'] Tue, 14 Aug 2012 12:00:59 DEBUGqemu-kvm-1.0.1-1.fc17.x86_64 Tue, 14 Aug 2012 12:00:59 DEBUG Tue, 14 Aug 2012 12:00:59 DEBUG BSTRAP component='VDS PACKAGES' status='OK' result='qemu-kvm' message='qemu-kvm-1.0.1-1.fc17.x86_64 '/ Tue, 14 Aug 2012 12:00:59 DEBUG
Re: [Users] oVirt 3.1 - Import ISO Domain
Date: Tue, 14 Aug 2012 15:12:16 -0400 From: domi...@bostonvineyard.org To: ricardo.m.este...@gmail.com CC: users@ovirt.org Subject: Re: [Users] oVirt 3.1 - Import ISO Domain Today I had the same error both 500 and 477. I was using ovirt-node-iso-2.5.0-2.0.fc17. I was doing a new install of 3.1 and could not add NFS storage at all. This build has a pre 3.5 kernel on it so that should not have been the problem. I then installed a new copy of Fedora 17 as the node added it as a host and was able to add all my NFS domains. I hope that helps. And does anyone know of this node build having problems? I can replicate this issue. Dominic ==The latest version of oVirt Node is 2.5.1-1.0, which was released at the same time as oVirt 3.1. I'd try that and see if it makes a difference.== On Tue, Aug 14, 2012 at 10:27 AM, Ricardo Esteves ricardo.m.este...@gmail.com wrote: Hi, I'm trying to import an ISO domain, but i get this: Error: A Request to the Server failed with the following Status Code: 500 On vdsm log i have this: MountError: (32, ;mount.nfs: rpc.statd is not running but is required for remote locking.\nmount.nfs: Either use '-o nolock' to keep locks local, or start statd.\nmount.nfs: an incorrect mount option was specified\n) Can someone help please? Best regards, Ricardo Esteves. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.1 - Import ISO Domain
On 08/15/2012 03:12 AM, Dominic Kaiser wrote: Today I had the same error both 500 and 477. I was using ovirt-node-iso-2.5.0-2.0.fc17. I was doing a new install of 3.1 and could not add NFS storage at all. This build has a pre 3.5 kernel on it so that should not have been the problem. I then installed a new copy of Fedora 17 as the node added it as a host and was able to add all my NFS domains. I hope that helps. And does anyone know of this node build having problems? I can replicate this issue. Dominic On Tue, Aug 14, 2012 at 10:27 AM, Ricardo Esteves ricardo.m.este...@gmail.com mailto:ricardo.m.este...@gmail.com wrote: Hi, I'm trying to import an ISO domain, but i get this: Error: A Request to the Server failed with the following Status Code: 500 On vdsm log i have this: MountError: (32, ;mount.nfs: rpc.statd is not running but is required for remote locking.\nmount.nfs: Either use '-o nolock' to keep locks local, or start statd.\nmount.nfs: an incorrect mount option was specified\n) Can someone help please? It seems it's related http://gerrit.ovirt.org/#/c/4720/. The unnecessary nfs related rpm/commands including rpc-bind were removed from ovirt-node. But the service nfs-lock requires rpc-bind, so it can't start. I guess so. Michael, is it? Thanks! Best regards, Ricardo Esteves. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Dominic Kaiser Greater Boston Vineyard Director of Operations cell: 617-230-1412 fax: 617-252-0238 email: domi...@bostonvineyard.org mailto:domi...@bostonvineyard.org ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users