[vchkpw] IMAP Relay export vpopmail
Hi Guys I can never remember how to set the variable before setting Imap up so that it works with vpopmail user relay agent. Thanks, Remo
[vchkpw] vpopmail bouncing problems
Does some one has vpopmail with procmail running and getting bouncing messages fine? i am using a general filter for all my virtual domain users, puting on the file .qmail-default the following line: |preline /usr/local/bin/procmail -p -m /etc/procmailrc filter works perfect, the problems are when bouncing a message to a sender that has email someone that is not a valid user. any ideas? Regardas BTW: This is my actual situation, i am using vpopmail with some virtual domains and i use procmail so users that have webmail can filter unwanted email, for that i am using the sqblock.rc file that is a set of rules for the squirrelmail webmail and they work fine. on my virtual host i have ~vpopmail/domains/unixmexico.org/.qmail-default and in that file i have: |preline /usr/local/bin/procmail -p -m /etc/procmailrc now, on /etc/procmailrc i have: INCLUDERC=/usr/local/squirrelmail/plugins/block_sender/sqblock.rc :0w |/usr/local/vpopmail/bin/vdelivermail '' bounce-no-mailbox the sqblock.rc has : -- # Location of the SquirrelMail user data files SQDATA=/usr/local/squirrelmail/data # Location of the user's SM Trash file ($HOME represents the user's home dir) SQTRASH=/dev/null # Full, absolute path of the test utility on the system TESTPATH=/bin/test # Full, absolute path of the formail utility on the system FORMAILPATH=/usr/local/bin/formail # Full, absolute path of the grep utility on the system GREPPATH=/usr/bin/grep # Full, absolute path of the sed utility on the system SEDPATH=/usr/bin/sed VERBOSE=yes LOGABSTRACT=yes LOGFILE=/var/log/procmail.log LOG=" " :0 * ? $TESTPATH -f $SQDATA/$BLOCKLIST { # Get the sender's email address :0h SENDER=|$FORMAILPATH -IReply-To: -rtzxTo: # Grab the domain from the sender DOMAIN=\*@`echo $SENDER|sed s/^.*@//` :0 * 1^0 ? $GREPPATH $SENDER $SQDATA/$BLOCKLIST * 1^0 ? $GREPPATH $DOMAIN $SQDATA/$BLOCKLIST { DROPPRIVS=yes :0 $SQTRASH } } -- now this works fine users can block unwanted email, the filter works Ok. the problem is that if some one send an email to a user that is not on the virtualhost, he dont get bounced back for example if i email to [EMAIL PROTECTED] i wont get a respond from MAILER-DAEMOND telling me that the user no_user don't exists this is the output of my log, when sending an email to [EMAIL PROTECTED] --- procmail: Assigning "LOG= " procmail: Executing "/bin/test,-f,[EMAIL PROTECTED]" procmail: Non-zero exitcode (1) from "/bin/test" procmail: No match on "/bin/test -f [EMAIL PROTECTED]" procmail: Executing "/usr/local/vpopmail/bin/vdelivermail,,bounce-no-mailbox" procmail: Program failure (100) of "/usr/local/vpopmail/bin/vdelivermail" procmail: Assigning "LASTFOLDER=/usr/local/vpopmail/bin/vdelivermail bounce-no-mailbox"From [EMAIL PROTECTED] Thu Dec 05 05:06:14 2002 Subject: test Folder: **Bounced** --- now if i put EXITCODE=100 on the /etc/procmailrc at the end of the rules: INCLUDERC=/usr/local/squirrelmail/plugins/block_sender/sqblock.rc :0w |/usr/local/vpopmail/bin/vdelivermail '' bounce-no-mailbox EXITCODE=100 bounce works but the bounce messages has something like this: From: [EMAIL PROTECTED] Hi. This is the qmail-send program at ns3.unixmexico.net. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[EMAIL PROTECTED]>: procmail: [74056] Wed Dec 4 23:08:47 2002 procmail: Assigning "LOGABSTRACT=yes" procmail: Assigning "LOGFILE=/var/log/procmail.log" procmail: Opening "/var/log/procmail.log" here instead of getting a message like saying NO MAILBOX FOUND. i get procmail: [74056] Wed Dec 4 23:08:47 2002 procmail: Assigning "LOGABSTRACT=yes" procmail: Assigning "LOGFILE=/var/log/procmail.log" procmail: Opening "/var/log/procmail.log" now, my questions are how can i chage this bounce message, or do i have an error on my rules ? should i use .qmail or .qmail-default under my vhost should i use: |preline /usr/local/bin/procmail -p -m /etc/procmailrc or |preline /usr/bin/procmail how can i call or make the line |/var/qmail/bin/bouncesaying 'Sorry, go away' to work what should i modify on my config o what do i am doing wrong ? why if i just put an EXITCODE=100 bounce start working but sending procmail lines like logs of procmail instead of a custom message. regards
RE: [vchkpw] Error somewhere, I don't know...
Please check the list archives. This has been gone over. You need to raise your softlimit. Regards, Tren -Original Message- From: Anders Norrbring [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 10, 2002 3:29 PM To: [EMAIL PROTECTED] Subject: [vchkpw] Error somewhere, I don't know... The problems never ends... Look at this, I did it manually from the console just to see why nothing happened from a client. root@berit> telnet localhost 110 root@berit> Connected to localhost. root@berit> Escape character is '^]'. root@berit> +OK <[EMAIL PROTECTED]> root@berit> USER [EMAIL PROTECTED] root@berit> +OK root@berit> PASS whatever root@berit >/var/vpopmail/bin/vchkpw: error while loading shared libraries: libc.so.6: failed to map segment from shared object: Cannot allocate memory root@berit> -ERR authorization failed root@berit> Connection closed by foreign host. Any ideas please? Anders Norrbring Norrbring Consulting.
[vchkpw] Error somewhere, I don't know...
The problems never ends... Look at this, I did it manually from the console just to see why nothing happened from a client. root@berit> telnet localhost 110 root@berit> Connected to localhost. root@berit> Escape character is '^]'. root@berit> +OK <[EMAIL PROTECTED]> root@berit> USER [EMAIL PROTECTED] root@berit> +OK root@berit> PASS whatever root@berit >/var/vpopmail/bin/vchkpw: error while loading shared libraries: libc.so.6: failed to map segment from shared object: Cannot allocate memory root@berit> -ERR authorization failed root@berit> Connection closed by foreign host. Any ideas please? Anders Norrbring Norrbring Consulting.
Re: [vchkpw] relaying not allowed
I solved the problem!! the tcprules app for some reason updates the /etc/tcp.smtp.cdb database and not the one in /home/vpopmail/etc as described in th FAQ so i changed in the run sript for tcprules to use the one in the /etc dir and then it worked as it should do... If this is not right someone tell me why this works then : ) Regards / Tobias - Original Message - From: "Johan Almqvist" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, December 10, 2002 10:18 PM Subject: Re: [vchkpw] relaying not allowed
Re: [vchkpw] relaying not allowed
* Brian Kolaci <[EMAIL PROTECTED]> [021210 21:22]: > Well, it looks like in your case, the problem appears > to be that the tcp.smtp.cdb file isn't being updated. > This is the file that the server uses to allow relaying > or not, and its timestamp is older than your tcp.smtp file. Tobias, you should probably try to attache strace or something like that to qmail-popop (with child process tracing) or to vchkpw. The problem may be that your system is looking for the tcprules program in the wrong place. -Johan msg10149/pgp0.pgp Description: PGP signature
Re: [vchkpw] relaying not allowed
Well, it looks like in your case, the problem appears to be that the tcp.smtp.cdb file isn't being updated. This is the file that the server uses to allow relaying or not, and its timestamp is older than your tcp.smtp file. Brian > Okay but should the option Accepted local and relay domains be set to Any > Domain ? > > Regards /Tobias > > > - Original Message - > From: "Brian Kolaci" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Tuesday, December 10, 2002 9:14 PM > Subject: Re: [vchkpw] relaying not allowed > > > > Hi Tobias, > > I've seen a similar thing recently, however I'm using MySQL > rather than files and my users have received the same error > message. I checked and found their IP in the table, however > they were still not allowed to send/relay mail. > > I had to resort to manually configure static blocks of IP's in > the tcp.stmp file rather than let the roaming feature work. > > Its strange, it works for 99% of our customers, but then I > find that some people get stuck from certain areas. > > Brian > > > Hi! i´m back again : P > > > > Someone who has setup vpopmail with roaming users who have some > suggestions > > for a beginner > > > > I have succeded so far that the pop 3 server writes to the file > open-smtp > > with correct ip and timestamp but the smtp server > > do not read it or maybe the permisions have been setup wrong. I have > looked > > allover for info but havent found any solutions yet > > > > the smtp server says > > > > The message could not be sent because one of the recipients was rejected > by > > the server. The rejected e-mail address was x. Subject '', > Account: > > , Server: , Protocol: SMTP, Server Response: '553 sorry, > > that domain isn't in my list of allowed rcpthosts (#5.7.1)', Port: 25, > > Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC79 > > > > maybe there is some file owner permision setup failure here´s a ls -la > on > > the etc dir of home/vpopmail > > > > drwxr-xr-x2 89 vchkpw 4096 Dec 10 21:01 ./ > > drwxr-xr-x8 89 vchkpw 4096 Dec 6 17:23 ../ > > -rw-r--r--1 89 vchkpw 25 Dec 6 17:22 inc_deps > > -rw-r--r--1 89 vchkpw 32 Dec 6 17:22 lib_deps > > -rw-r--r--1 root root 60 Dec 10 21:01 open-smtp > > -rw-r--r--1 root root0 Dec 10 21:01 open-smtp.lock > > -rw-r--r--1 root root0 Dec 9 12:52 > open-smtp.tmp.10753 > > -rw-r--r--1 root root0 Dec 8 19:06 > open-smtp.tmp.10766 > > -rw-r--r--1 root root0 Dec 9 16:16 > open-smtp.tmp.11173 > > -rw-r--r--1 root root0 Dec 7 16:03 > open-smtp.tmp.11200 > > -rw-r--r--1 root root0 Dec 9 18:46 > open-smtp.tmp.11281 > > -rw-r--r--1 root root0 Dec 9 14:46 > open-smtp.tmp.11880 > > -rw-r--r--1 root root0 Dec 9 15:05 > open-smtp.tmp.12481 > > -rw-r--r--1 root root0 Dec 9 13:42 > open-smtp.tmp.12500 > > -rw-r--r--1 root root0 Dec 9 21:46 > open-smtp.tmp.12663 > > -rw-r--r--1 root root0 Dec 7 21:14 > open-smtp.tmp.12861 > > -rw-r--r--1 root root0 Dec 9 15:42 > open-smtp.tmp.12869 > > -rw-r--r--1 root root0 Dec 8 01:45 > open-smtp.tmp.13274 > > -rw-r--r--1 root root0 Dec 8 21:27 > open-smtp.tmp.14119 > > -rw-r--r--1 root root0 Dec 8 00:45 > open-smtp.tmp.14307 > > -rw-r--r--1 root root0 Dec 8 14:31 > open-smtp.tmp.14327 > > -rw-r--r--1 root root0 Dec 7 16:03 > open-smtp.tmp.14825 > > -rw-r--r--1 root root0 Dec 9 17:46 > open-smtp.tmp.14895 > > -rw-r--r--1 root root0 Dec 7 18:35 > open-smtp.tmp.15191 > > -rw-r--r--1 root root0 Dec 9 19:16 > open-smtp.tmp.15331 > > -rw-r--r--1 root root0 Dec 7 22:14 > open-smtp.tmp.15618 > > -rw-r--r--1 root root0 Dec 9 16:46 > open-smtp.tmp.15881 > > -rw-r--r--1 root root0 Dec 9 20:16 > open-smtp.tmp.16429 > > -rw-r--r--1 root root0 Dec 7 18:36 > open-smtp.tmp.16483 > > -rw-r--r--1 root root0 Dec 8 02:16 > open-smtp.tmp.1719 > > -rw-r--r--1 root root0 Dec 8 01:15 > open-smtp.tmp.17426 > > -rw-r--r--1 root root0 Dec 9 13:23 > open-smtp.tmp.18732 > > -rw-r--r--1 root root0 Dec 8 14:28 > open-smtp.tmp.19621 >
Re: [vchkpw] relaying not allowed
Okay but should the option Accepted local and relay domains be set to Any Domain ? Regards /Tobias - Original Message - From: "Brian Kolaci" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, December 10, 2002 9:14 PM Subject: Re: [vchkpw] relaying not allowed Hi Tobias, I've seen a similar thing recently, however I'm using MySQL rather than files and my users have received the same error message. I checked and found their IP in the table, however they were still not allowed to send/relay mail. I had to resort to manually configure static blocks of IP's in the tcp.stmp file rather than let the roaming feature work. Its strange, it works for 99% of our customers, but then I find that some people get stuck from certain areas. Brian > Hi! i´m back again : P > > Someone who has setup vpopmail with roaming users who have some suggestions > for a beginner > > I have succeded so far that the pop 3 server writes to the file open-smtp > with correct ip and timestamp but the smtp server > do not read it or maybe the permisions have been setup wrong. I have looked > allover for info but havent found any solutions yet > > the smtp server says > > The message could not be sent because one of the recipients was rejected by > the server. The rejected e-mail address was x. Subject '', Account: > , Server: , Protocol: SMTP, Server Response: '553 sorry, > that domain isn't in my list of allowed rcpthosts (#5.7.1)', Port: 25, > Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC79 > > maybe there is some file owner permision setup failure here´s a ls -la on > the etc dir of home/vpopmail > > drwxr-xr-x2 89 vchkpw 4096 Dec 10 21:01 ./ > drwxr-xr-x8 89 vchkpw 4096 Dec 6 17:23 ../ > -rw-r--r--1 89 vchkpw 25 Dec 6 17:22 inc_deps > -rw-r--r--1 89 vchkpw 32 Dec 6 17:22 lib_deps > -rw-r--r--1 root root 60 Dec 10 21:01 open-smtp > -rw-r--r--1 root root0 Dec 10 21:01 open-smtp.lock > -rw-r--r--1 root root0 Dec 9 12:52 open-smtp.tmp.10753 > -rw-r--r--1 root root0 Dec 8 19:06 open-smtp.tmp.10766 > -rw-r--r--1 root root0 Dec 9 16:16 open-smtp.tmp.11173 > -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.11200 > -rw-r--r--1 root root0 Dec 9 18:46 open-smtp.tmp.11281 > -rw-r--r--1 root root0 Dec 9 14:46 open-smtp.tmp.11880 > -rw-r--r--1 root root0 Dec 9 15:05 open-smtp.tmp.12481 > -rw-r--r--1 root root0 Dec 9 13:42 open-smtp.tmp.12500 > -rw-r--r--1 root root0 Dec 9 21:46 open-smtp.tmp.12663 > -rw-r--r--1 root root0 Dec 7 21:14 open-smtp.tmp.12861 > -rw-r--r--1 root root0 Dec 9 15:42 open-smtp.tmp.12869 > -rw-r--r--1 root root0 Dec 8 01:45 open-smtp.tmp.13274 > -rw-r--r--1 root root0 Dec 8 21:27 open-smtp.tmp.14119 > -rw-r--r--1 root root0 Dec 8 00:45 open-smtp.tmp.14307 > -rw-r--r--1 root root0 Dec 8 14:31 open-smtp.tmp.14327 > -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.14825 > -rw-r--r--1 root root0 Dec 9 17:46 open-smtp.tmp.14895 > -rw-r--r--1 root root0 Dec 7 18:35 open-smtp.tmp.15191 > -rw-r--r--1 root root0 Dec 9 19:16 open-smtp.tmp.15331 > -rw-r--r--1 root root0 Dec 7 22:14 open-smtp.tmp.15618 > -rw-r--r--1 root root0 Dec 9 16:46 open-smtp.tmp.15881 > -rw-r--r--1 root root0 Dec 9 20:16 open-smtp.tmp.16429 > -rw-r--r--1 root root0 Dec 7 18:36 open-smtp.tmp.16483 > -rw-r--r--1 root root0 Dec 8 02:16 open-smtp.tmp.1719 > -rw-r--r--1 root root0 Dec 8 01:15 open-smtp.tmp.17426 > -rw-r--r--1 root root0 Dec 9 13:23 open-smtp.tmp.18732 > -rw-r--r--1 root root0 Dec 8 14:28 open-smtp.tmp.19621 > -rw-r--r--1 root root0 Dec 9 19:46 open-smtp.tmp.19655 > -rw-r--r--1 root root0 Dec 8 23:03 open-smtp.tmp.1983 > -rw-r--r--1 root root0 Dec 8 17:46 open-smtp.tmp.20357 > -rw-r--r--1 root root0 Dec 8 04:54 open-smtp.tmp.20512 > -rw-r--r--1 root root0 Dec 9 13:49 open-smtp.tmp.21280 > -rw-r--r--1 root root0 Dec 7 17:04 open-smtp.tmp.21672 > -rw-r--r--1 root root0 Dec 7 23:45 open-smtp.tmp.21711 > -rw-r--r--1 root root0 Dec 8 22:14 open-smtp.tmp.21890 > -rw-r--r--1 root root0 Dec 7 18:39 open-smt
Re: [vchkpw] relaying not allowed
Hi Tobias, I've seen a similar thing recently, however I'm using MySQL rather than files and my users have received the same error message. I checked and found their IP in the table, however they were still not allowed to send/relay mail. I had to resort to manually configure static blocks of IP's in the tcp.stmp file rather than let the roaming feature work. Its strange, it works for 99% of our customers, but then I find that some people get stuck from certain areas. Brian > Hi! i´m back again : P > > Someone who has setup vpopmail with roaming users who have some suggestions > for a beginner > > I have succeded so far that the pop 3 server writes to the file open-smtp > with correct ip and timestamp but the smtp server > do not read it or maybe the permisions have been setup wrong. I have looked > allover for info but havent found any solutions yet > > the smtp server says > > The message could not be sent because one of the recipients was rejected by > the server. The rejected e-mail address was x. Subject '', Account: > , Server: , Protocol: SMTP, Server Response: '553 sorry, > that domain isn't in my list of allowed rcpthosts (#5.7.1)', Port: 25, > Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC79 > > maybe there is some file owner permision setup failure here´s a ls -la on > the etc dir of home/vpopmail > > drwxr-xr-x2 89 vchkpw 4096 Dec 10 21:01 ./ > drwxr-xr-x8 89 vchkpw 4096 Dec 6 17:23 ../ > -rw-r--r--1 89 vchkpw 25 Dec 6 17:22 inc_deps > -rw-r--r--1 89 vchkpw 32 Dec 6 17:22 lib_deps > -rw-r--r--1 root root 60 Dec 10 21:01 open-smtp > -rw-r--r--1 root root0 Dec 10 21:01 open-smtp.lock > -rw-r--r--1 root root0 Dec 9 12:52 open-smtp.tmp.10753 > -rw-r--r--1 root root0 Dec 8 19:06 open-smtp.tmp.10766 > -rw-r--r--1 root root0 Dec 9 16:16 open-smtp.tmp.11173 > -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.11200 > -rw-r--r--1 root root0 Dec 9 18:46 open-smtp.tmp.11281 > -rw-r--r--1 root root0 Dec 9 14:46 open-smtp.tmp.11880 > -rw-r--r--1 root root0 Dec 9 15:05 open-smtp.tmp.12481 > -rw-r--r--1 root root0 Dec 9 13:42 open-smtp.tmp.12500 > -rw-r--r--1 root root0 Dec 9 21:46 open-smtp.tmp.12663 > -rw-r--r--1 root root0 Dec 7 21:14 open-smtp.tmp.12861 > -rw-r--r--1 root root0 Dec 9 15:42 open-smtp.tmp.12869 > -rw-r--r--1 root root0 Dec 8 01:45 open-smtp.tmp.13274 > -rw-r--r--1 root root0 Dec 8 21:27 open-smtp.tmp.14119 > -rw-r--r--1 root root0 Dec 8 00:45 open-smtp.tmp.14307 > -rw-r--r--1 root root0 Dec 8 14:31 open-smtp.tmp.14327 > -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.14825 > -rw-r--r--1 root root0 Dec 9 17:46 open-smtp.tmp.14895 > -rw-r--r--1 root root0 Dec 7 18:35 open-smtp.tmp.15191 > -rw-r--r--1 root root0 Dec 9 19:16 open-smtp.tmp.15331 > -rw-r--r--1 root root0 Dec 7 22:14 open-smtp.tmp.15618 > -rw-r--r--1 root root0 Dec 9 16:46 open-smtp.tmp.15881 > -rw-r--r--1 root root0 Dec 9 20:16 open-smtp.tmp.16429 > -rw-r--r--1 root root0 Dec 7 18:36 open-smtp.tmp.16483 > -rw-r--r--1 root root0 Dec 8 02:16 open-smtp.tmp.1719 > -rw-r--r--1 root root0 Dec 8 01:15 open-smtp.tmp.17426 > -rw-r--r--1 root root0 Dec 9 13:23 open-smtp.tmp.18732 > -rw-r--r--1 root root0 Dec 8 14:28 open-smtp.tmp.19621 > -rw-r--r--1 root root0 Dec 9 19:46 open-smtp.tmp.19655 > -rw-r--r--1 root root0 Dec 8 23:03 open-smtp.tmp.1983 > -rw-r--r--1 root root0 Dec 8 17:46 open-smtp.tmp.20357 > -rw-r--r--1 root root0 Dec 8 04:54 open-smtp.tmp.20512 > -rw-r--r--1 root root0 Dec 9 13:49 open-smtp.tmp.21280 > -rw-r--r--1 root root0 Dec 7 17:04 open-smtp.tmp.21672 > -rw-r--r--1 root root0 Dec 7 23:45 open-smtp.tmp.21711 > -rw-r--r--1 root root0 Dec 8 22:14 open-smtp.tmp.21890 > -rw-r--r--1 root root0 Dec 7 18:39 open-smtp.tmp.22001 > -rw-r--r--1 root root0 Dec 9 13:29 open-smtp.tmp.22186 > -rw-r--r--1 root root0 Dec 7 18:57 open-smtp.tmp.22391 > -rw-r--r--1 root root0 Dec 9 14:01 open-smtp.tmp.22793 > -rw-r--r--1 root root0 D
[vchkpw] relaying not allowed
Hi! i´m back again : P Someone who has setup vpopmail with roaming users who have some suggestions for a beginner I have succeded so far that the pop 3 server writes to the file open-smtp with correct ip and timestamp but the smtp server do not read it or maybe the permisions have been setup wrong. I have looked allover for info but havent found any solutions yet the smtp server says The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was x. Subject '', Account: , Server: , Protocol: SMTP, Server Response: '553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)', Port: 25, Secure(SSL): No, Server Error: 553, Error Number: 0x800CCC79 maybe there is some file owner permision setup failure here´s a ls -la on the etc dir of home/vpopmail drwxr-xr-x2 89 vchkpw 4096 Dec 10 21:01 ./ drwxr-xr-x8 89 vchkpw 4096 Dec 6 17:23 ../ -rw-r--r--1 89 vchkpw 25 Dec 6 17:22 inc_deps -rw-r--r--1 89 vchkpw 32 Dec 6 17:22 lib_deps -rw-r--r--1 root root 60 Dec 10 21:01 open-smtp -rw-r--r--1 root root0 Dec 10 21:01 open-smtp.lock -rw-r--r--1 root root0 Dec 9 12:52 open-smtp.tmp.10753 -rw-r--r--1 root root0 Dec 8 19:06 open-smtp.tmp.10766 -rw-r--r--1 root root0 Dec 9 16:16 open-smtp.tmp.11173 -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.11200 -rw-r--r--1 root root0 Dec 9 18:46 open-smtp.tmp.11281 -rw-r--r--1 root root0 Dec 9 14:46 open-smtp.tmp.11880 -rw-r--r--1 root root0 Dec 9 15:05 open-smtp.tmp.12481 -rw-r--r--1 root root0 Dec 9 13:42 open-smtp.tmp.12500 -rw-r--r--1 root root0 Dec 9 21:46 open-smtp.tmp.12663 -rw-r--r--1 root root0 Dec 7 21:14 open-smtp.tmp.12861 -rw-r--r--1 root root0 Dec 9 15:42 open-smtp.tmp.12869 -rw-r--r--1 root root0 Dec 8 01:45 open-smtp.tmp.13274 -rw-r--r--1 root root0 Dec 8 21:27 open-smtp.tmp.14119 -rw-r--r--1 root root0 Dec 8 00:45 open-smtp.tmp.14307 -rw-r--r--1 root root0 Dec 8 14:31 open-smtp.tmp.14327 -rw-r--r--1 root root0 Dec 7 16:03 open-smtp.tmp.14825 -rw-r--r--1 root root0 Dec 9 17:46 open-smtp.tmp.14895 -rw-r--r--1 root root0 Dec 7 18:35 open-smtp.tmp.15191 -rw-r--r--1 root root0 Dec 9 19:16 open-smtp.tmp.15331 -rw-r--r--1 root root0 Dec 7 22:14 open-smtp.tmp.15618 -rw-r--r--1 root root0 Dec 9 16:46 open-smtp.tmp.15881 -rw-r--r--1 root root0 Dec 9 20:16 open-smtp.tmp.16429 -rw-r--r--1 root root0 Dec 7 18:36 open-smtp.tmp.16483 -rw-r--r--1 root root0 Dec 8 02:16 open-smtp.tmp.1719 -rw-r--r--1 root root0 Dec 8 01:15 open-smtp.tmp.17426 -rw-r--r--1 root root0 Dec 9 13:23 open-smtp.tmp.18732 -rw-r--r--1 root root0 Dec 8 14:28 open-smtp.tmp.19621 -rw-r--r--1 root root0 Dec 9 19:46 open-smtp.tmp.19655 -rw-r--r--1 root root0 Dec 8 23:03 open-smtp.tmp.1983 -rw-r--r--1 root root0 Dec 8 17:46 open-smtp.tmp.20357 -rw-r--r--1 root root0 Dec 8 04:54 open-smtp.tmp.20512 -rw-r--r--1 root root0 Dec 9 13:49 open-smtp.tmp.21280 -rw-r--r--1 root root0 Dec 7 17:04 open-smtp.tmp.21672 -rw-r--r--1 root root0 Dec 7 23:45 open-smtp.tmp.21711 -rw-r--r--1 root root0 Dec 8 22:14 open-smtp.tmp.21890 -rw-r--r--1 root root0 Dec 7 18:39 open-smtp.tmp.22001 -rw-r--r--1 root root0 Dec 9 13:29 open-smtp.tmp.22186 -rw-r--r--1 root root0 Dec 7 18:57 open-smtp.tmp.22391 -rw-r--r--1 root root0 Dec 9 14:01 open-smtp.tmp.22793 -rw-r--r--1 root root0 Dec 9 15:46 open-smtp.tmp.23728 -rw-r--r--1 root root0 Dec 9 14:56 open-smtp.tmp.23873 -rw-r--r--1 root root0 Dec 7 18:35 open-smtp.tmp.2400 -rw-r--r--1 root root0 Dec 8 23:33 open-smtp.tmp.245 -rw-r--r--1 root root0 Dec 7 22:44 open-smtp.tmp.24970 -rw-r--r--1 root root0 Dec 7 21:44 open-smtp.tmp.25149 -rw-r--r--1 root root0 Dec 8 22:03 open-smtp.tmp.25184 -rw-r--r--1 root root0 Dec 8 03:46 open-smtp.tmp.25444 -rw-r--r--1 root root0 Dec 8 18:47 open-smtp.tmp.26248 -rw-r--r--1 root root0 Dec 8 18:56 open-smtp.tmp.26956 -rw-r--r--1 root root
[vchkpw] Configure script *and* domain creation errors!
Thanx Clayton, However, it still didn't work out.. I entered this in syslog.conf and even restarted the computer to get rid of any mistakes... mail.* -/var/log/mail vpopmail-/var/log/vpopmail I ran ./configure like this: ./configure --enable-roaming-users=y --enable-relay-clear-minutes=10 \ --enable-mysql=y --enable-clear-passwd=y --enable-valias=y \ --enable-logging=v --enable-log-name=vpopmail And got this... vpopmail 5.2.1 Current settings --- vpopmail directory = /var/vpopmail uid = 89 gid = 89 ip alias = OFF --enable-ip-alias-domains=n (default) address extentions = OFF --enable-qmail-ext=n (default) roaming users = ON --enable-roaming-users=y tcpserver file = /etc/tcp.smtp open_smtp file = /var/vpopmail/etc/open-smtp user quota = OFF --enable-defaultquota=NOQUOTA default auth module = mysql --enable-mysql=y mysql replication = OFF --enable-mysql-replication=n default table optimization = many domains --enable-many-domains=y default system passwords = OFF --enable-passwd=n default file locking = ON --enable-file-locking=y default file sync = OFF --enable-file-sync=n default disable vdelivermail fsync auth logging = ON --enable-auth-logging=y default mysql logging = OFF --enable-mysql-logging=n default clear passwd = ON --enable-clear-passwd=y (default) valias processing = ON --enable-valias=y pop syslog = show only failure attempts --enable-logging=e default default domain = --enable-default-domain= auth inc = -I/usr/include/mysql auth lib = -L/usr/lib/mysql -lmysqlclient -lz After compiling and installing, I get no log at all when generating a faulty login. I also have another EXTREMELY irritating problem, when a run "vadddomain" it's telling me the domain already exists, but the MySQL database is absolutely clean, nothing at all in there. The same goes for vpopmail/domains directory, absolutely empty! I really need this to get up and running real soon, so any ideas are welcome! Anders Norrbring Norrbring Consulting. -Ursprungligt meddelande- Från: Clayton Weise [mailto:[EMAIL PROTECTED]] Skickat: den 10 december 2002 18:00 Till: Anders Norrbring Kopia: [EMAIL PROTECTED] Ämne: Re: [vchkpw] Configure script errors... Log name has nothing to do with the log file name. It has to do with what vpopmail calls itself to syslog. Don't put .log, just vpopmail should be sufficient, you can setup syslog in /etc/syslog.conf to log vpopmail stuff to it's own log file. It's possible that invalid log name might be causing the problem with logging not being verbose. On Tuesday, December 10, 2002, at 08:41 AM, Anders Norrbring wrote: > Can anyone please tell me what's wrong with the configure command I > give > to vpopmail-5.2.1 ? > > It' like this: > > ./configure --enable-roaming-users=y --enable-relay-clear-minutes=10 > --enable-mysql=y --enable-clear-passwd=y \ > --enable-valias=y --enable-logging=v > --enable-log-name=vpopmail.log > > The result gives this: > >vpopmail 5.2.1 > Current settings > --- > > vpopmail directory = /var/vpopmail >uid = 89 >gid = 89 > ip alias = OFF --enable-ip-alias-domains=n (default) > address extentions = OFF --enable-qmail-ext=n (default) > roaming users = ON --enable-roaming-users=y > tcpserver file = /etc/tcp.smtp > open_smtp file = /var/vpopmail/etc/open-smtp > user quota = OFF --enable-defaultquota=NOQUOTA default >auth module = mysql --enable-mysql=y > mysql replication = OFF --enable-mysql-replication=n default > table optimization = many domains --enable-many-domains=y default > system passwords = OFF --enable-passwd=n default > file locking = ON --enable-file-locking=y default > file sync = OFF --enable-file-sync=n default disable > vdelivermail fsync > auth logging = ON --enable-auth-logging=y default > mysql logging = OFF --enable-mysql-logging=n default > clear passwd = ON --enable-clear-passwd=y (default) > valias processing = ON --enable-valias=y > pop syslog = show only failure attempts > --enable-logging=e default > default domain = --enable-default-domain= > auth inc = -I/usr/include/mysql > auth lib = -L/usr/lib/mysql -lmysqlclient -lz > > As you can see, the log file is *not* set to verbose as I asked for, > and > the log file name is *not* set to vpopmail.log as I also asked for. > So, > what about the "enable-relay-clear-minutes" ? Is that *still* 180 > minutes?? > > I also tried to set quota check on, that didn't work either... Any > ideas? I'm running on a SuSE 8.1 system. > > Anders Norrbring > Norrbring Consulting. > > > >
Re: [vchkpw] when vdelivermail creates directory like 0, 1.. ?
Hi erti, On Tue, 10 Dec 2002 19:15:36 +0200 "erti" <[EMAIL PROTECTED]> wrote: > I have noticed a directory named '0' (zero) in ~vpopmail/domains > directory. Why and when it was created When the threshold of number of users per domain to put into one directory was reached (default 100???) > and when '1' will bi created? When the next threshold is reached ... 200?? Search in your vpopmail sources for a dir named doc/doc_html and have a look at vpopmail.html saerch for "Virtual domain user directory structure" -- Peter
Re: [vchkpw] Qmailadmin not working
Hi Jeremy, On Tue, 10 Dec 2002 11:40:11 -0500 Jeremy Doolin <[EMAIL PROTECTED]> wrote: > I'm having fits getting qmailadmin to authenticate properly. Here is > my setup: > > qmail, vpopmail, autoresponder, ezmlm, apache 2.0, squirrelmail, > courier-imap. > > I can authenticate with my virtual user ([EMAIL PROTECTED]) via > squirrelmail, sqwebmail, pop3 and IMAP, but not qmailadmin. I enter > "postmaster" for the user account, "domain.com" for the domain name > and my password and I continue to get "Invalid User". Any help with > this would be greatly appreciated. Thanks. Have a look into system log, maybe vchkpw logs the reason of rejection. Might be it's only your qmailadmin cgi is not properly set SUID and therefore refused to authenticate. -- Pit
Re: [vchkpw] Re: Log/back up all in/out msgs on a unique virtualdomain
Hi Steve, On Tue, 10 Dec 2002 11:10:06 -0500 Steve Fulton <[EMAIL PROTECTED]> wrote: >> There's no known way to log outgoing mails in a different way, except >> maybe making use of QMAILQUEUE patch, which is in the above mentioned >> tar.gz as file 'qmail-1.03-queuevar.patch'. Nevertheless you'll have >> to patch and re-compile/re-install qmail. > Actually there is, using "recordio". I'm sorry, I stand corrected. Albeit in this case I'd still prefer patching qmail :-) -- Peter
[vchkpw] when vdelivermail creates directory like 0, 1.. ?
Hi, I have noticed a directory named '0' (zero) in ~vpopmail/domains directory. Why and when it was created and when '1' will bi created? Thanks Ertan Yusufoglu
Re: [vchkpw] Configure script errors...
Log name has nothing to do with the log file name. It has to do with what vpopmail calls itself to syslog. Don't put .log, just vpopmail should be sufficient, you can setup syslog in /etc/syslog.conf to log vpopmail stuff to it's own log file. It's possible that invalid log name might be causing the problem with logging not being verbose. On Tuesday, December 10, 2002, at 08:41 AM, Anders Norrbring wrote: Can anyone please tell me what's wrong with the configure command I give to vpopmail-5.2.1 ? It' like this: ./configure --enable-roaming-users=y --enable-relay-clear-minutes=10 --enable-mysql=y --enable-clear-passwd=y \ --enable-valias=y --enable-logging=v --enable-log-name=vpopmail.log The result gives this: vpopmail 5.2.1 Current settings --- vpopmail directory = /var/vpopmail uid = 89 gid = 89 ip alias = OFF --enable-ip-alias-domains=n (default) address extentions = OFF --enable-qmail-ext=n (default) roaming users = ON --enable-roaming-users=y tcpserver file = /etc/tcp.smtp open_smtp file = /var/vpopmail/etc/open-smtp user quota = OFF --enable-defaultquota=NOQUOTA default auth module = mysql --enable-mysql=y mysql replication = OFF --enable-mysql-replication=n default table optimization = many domains --enable-many-domains=y default system passwords = OFF --enable-passwd=n default file locking = ON --enable-file-locking=y default file sync = OFF --enable-file-sync=n default disable vdelivermail fsync auth logging = ON --enable-auth-logging=y default mysql logging = OFF --enable-mysql-logging=n default clear passwd = ON --enable-clear-passwd=y (default) valias processing = ON --enable-valias=y pop syslog = show only failure attempts --enable-logging=e default default domain = --enable-default-domain= auth inc = -I/usr/include/mysql auth lib = -L/usr/lib/mysql -lmysqlclient -lz As you can see, the log file is *not* set to verbose as I asked for, and the log file name is *not* set to vpopmail.log as I also asked for. So, what about the "enable-relay-clear-minutes" ? Is that *still* 180 minutes?? I also tried to set quota check on, that didn't work either... Any ideas? I'm running on a SuSE 8.1 system. Anders Norrbring Norrbring Consulting.
[vchkpw] Configure script errors...
Can anyone please tell me what's wrong with the configure command I give to vpopmail-5.2.1 ? It' like this: ./configure --enable-roaming-users=y --enable-relay-clear-minutes=10 --enable-mysql=y --enable-clear-passwd=y \ --enable-valias=y --enable-logging=v --enable-log-name=vpopmail.log The result gives this: vpopmail 5.2.1 Current settings --- vpopmail directory = /var/vpopmail uid = 89 gid = 89 ip alias = OFF --enable-ip-alias-domains=n (default) address extentions = OFF --enable-qmail-ext=n (default) roaming users = ON --enable-roaming-users=y tcpserver file = /etc/tcp.smtp open_smtp file = /var/vpopmail/etc/open-smtp user quota = OFF --enable-defaultquota=NOQUOTA default auth module = mysql --enable-mysql=y mysql replication = OFF --enable-mysql-replication=n default table optimization = many domains --enable-many-domains=y default system passwords = OFF --enable-passwd=n default file locking = ON --enable-file-locking=y default file sync = OFF --enable-file-sync=n default disable vdelivermail fsync auth logging = ON --enable-auth-logging=y default mysql logging = OFF --enable-mysql-logging=n default clear passwd = ON --enable-clear-passwd=y (default) valias processing = ON --enable-valias=y pop syslog = show only failure attempts --enable-logging=e default default domain = --enable-default-domain= auth inc = -I/usr/include/mysql auth lib = -L/usr/lib/mysql -lmysqlclient -lz As you can see, the log file is *not* set to verbose as I asked for, and the log file name is *not* set to vpopmail.log as I also asked for. So, what about the "enable-relay-clear-minutes" ? Is that *still* 180 minutes?? I also tried to set quota check on, that didn't work either... Any ideas? I'm running on a SuSE 8.1 system. Anders Norrbring Norrbring Consulting.
[vchkpw] Qmailadmin not working
Hello, I'm having fits getting qmailadmin to authenticate properly. Here is my setup: qmail, vpopmail, autoresponder, ezmlm, apache 2.0, squirrelmail, courier-imap. I can authenticate with my virtual user ([EMAIL PROTECTED]) via squirrelmail, sqwebmail, pop3 and IMAP, but not qmailadmin. I enter "postmaster" for the user account, "domain.com" for the domain name and my password and I continue to get "Invalid User". Any help with this would be greatly appreciated. Thanks. Jeremy Doolin
Re: [vchkpw] Re: Log/back up all in/out msgs on a unique virtualdomain
At 09:22 10/12/2002 +0100, Peter Palmreuther wrote: There's no known way to log outgoing mails in a different way, except maybe making use of QMAILQUEUE patch, which is in the above mentioned tar.gz as file 'qmail-1.03-queuevar.patch'. Nevertheless you'll have to patch and re-compile/re-install qmail. Actually there is, using "recordio". It is indiscriminate and obviously requires a lot of diskspace, but it is possible. I've used it for session debugging with clients, though it has other uses, particularly compliance with court ordered monitoring. There are instructions on www.qmail.org .. do a search for recordio. -- Steve
[vchkpw] Almost working... vpopmail+maildrop+mailadmin
Hi, After hours of fight my setup is working: 1) maildrop 1.5.0 2) vpopmail 5.2 3) qmailadmin 1.0.4 4) sqwebmail 3.3.3 I have just one problem: I dont need to loose the catchall feature of vpopmail, so I cant use a .qmail-default in the domain dir to instruct qmail to use maildrop. One possible solution is to keep the .qmail-default untouched, and create a .qmail-user for every user in the domain, with the following: _ | /usr/local/bin/maildrop /etc/maildroprc _ and maildroprc _ VHOME=`/var/vpopmail/bin/vuserinfo -d $EXT@$HOST` include $VHOME/Maildir/.mailfilter _ the user .mailfilter contains the following: _ #MFMAILDROP=2 # # DO NOT EDIT THIS FILE. This is an automatically generated filter. MAILDIRQUOTA="10S" FROM='[EMAIL PROTECTED]' import SENDER if ($SENDER eq "") { SENDER=$FROM } ##Op:contains ##Header: ##Value:teste ##Folder:*Seu email contem teste ##From: ##PlainString ##Body ##Name:Teste to "| /var/vpopmail/bin/vdelivermail '' bounce-no-mailbox" _ This way, I dont loose the vdelivermail features (like quota), and use the maildrop filtering too. The .mailfilter file is created by the sqwebmail. My problem is that this way, I will have to create a .qmail- file to every user in every domain, and maintain this sincronized How can I avoid this? Im thinking in hack qmailadmin, but this is a 'last resort'. Thanks in advance, ___ ALMEIDA, Fernando Costa de Computeasy Informática www.computeasy.com.br BSD USER BSD050945 ICQ 72293951
Re: [vchkpw] SpamAssassin on a per user basis
Hi John Stile, you wrote. JS> I am using vpopmail version 5.20 and trying to get SpamAssassin working JS> on a per user basis. Modifying .qmail-default and .qmail-user files, JS> according to past threads in this list, fail to work, causing mail to JS> bounce. JS> Do I have to up upgrade above 5.20 to get it working or is it possible JS> to get it working with what I have? Basically, you could have (it worked for me some time back) .qmail-user for each user, containing | sh -c "spamassassin options |vdelivermail options" but that has the overhead of invoking sh for each user AND kinda defeats the point of vpopmail if you need to have an alias file for each user. I've been thinking about implementing this directly into vdelivermail on various occasions but I can't find the time to do so (now, of course, if someone were to pay for it and release it under the GPL this would change rapidly ;-). Regards, Gabriel
[vchkpw] Re: Log/back up all in/out msgs on a unique virtualdomain
Hello Luis, On Monday, December 9, 2002 at 11:54:06 PM you wrote: > I'm using Qmail with Vpopmail. I need to LOG all incoming and outgoing > messages on an specific virtualdomain (not all domains on my mail > server). Get http://www.untroubled.org/qmail+patches/current/release-19.tar.gz from Bruce Guenter's web site. It contains a file named 'qmail-1.03-msglog.patch'. Patch your qmail, re-compile and re-install it. Create a file ~alias/.qmail-msglog and read 'dot.qmail-msglog' form the downloaded tar.gz for having a template for this file. Pipe all mails to a script or program, that checks if the message is from or to this particular domain you're trying to observer. If so log the message, if not simply drop the message. That's it. There's no known way to log outgoing mails in a different way, except maybe making use of QMAILQUEUE patch, which is in the above mentioned tar.gz as file 'qmail-1.03-queuevar.patch'. Nevertheless you'll have to patch and re-compile/re-install qmail. -- Best regards Peter Palmreuther