Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
with this patch I could receive dvb-s2 channels on my VDR 170 I don't have the error May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument anymore @gilmi thanks Igor > sorry, took a little bit longer to find time for made the patch. > This patch is against multiproto_plus + > HVR-4000-multiproto_plus-2008-04-25.diff. > With this combination i'm able to tune all HDTV channels on Astra 19.2E. > My Hardware is a WinTV Nova HD S2. > > cu > > Edgar (gimli) Hucek > > > On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote: > >> Some postings before i read about multiproto + hvr4000 and tuning > >> problems. > >> I had that problems myselfe. The problem is the inversion setting in the > >> driver. It's a driver bug. At the moment i do not have my modified > >> driver > >> by hand. Will post it in later today. I did a mixuup between : > >> http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html > >> and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a > >> patch i have done. > >> > >> c > >> > >> Edgar (gimli) Hucek > > > > Oh, nice one, could you correct my update on your work for > > multiproto_plus : > > http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html > > > > I must have different hardware because all works just fine here... > > > > Thanks, > > -- > > GrИgoire FAVRE http://gregoire.favre.googlepages.com > > http://www.gnupg.org > >http://picasaweb.google.com/Gregoire.Favre > > > > > > > > ATTACHMENT: application/octet-stream > (HVR-4000-multiproto_plus-2008-04-25_inversion.diff) > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
> > > Have you replaced linux/include/linux/compiler.h with the one from your > > > kernel ? (in multiproto_plus dir) if that's going to be included, this > > > shouldn't be in of course. > > > > your patch included the compiler.h, after replacing it with the right > > one the drivers are build > > your patch also created a .config.old in v4l and the cx88 modules are > > not build (the .config created during make does only contain inaktive > > lines for cx88 modules), i modified the .config manual and started make > > again > > OK, here's one without compiler.h and without .config.old (by the way, I > don't understand why make distclean didn't remove it...). > > Good new, such way the patch is even smaller, so it would be really good > to have it included finally into the repo :-) > > Any objection to the inclusion ? with this patch I have the error May 3 22:42:15 localhost vdr: [3471] ERROR (dvbdevice.c,302): Invalid argument when I try to tune on dvb-s2 channels on VDR But with HVR-4000-multiproto_plus-2008-04-25.diff + "HVR-4000-multiproto_plus-2008-04-25_inversion" is OK for me Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
On Fri, May 02, 2008 at 06:12:53PM +0200, Lars Bläser wrote: > > Have you replaced linux/include/linux/compiler.h with the one from your > > kernel ? (in multiproto_plus dir) if that's going to be included, this > > shouldn't be in of course. > > your patch included the compiler.h, after replacing it with the right > one the drivers are build > your patch also created a .config.old in v4l and the cx88 modules are > not build (the .config created during make does only contain inaktive > lines for cx88 modules), i modified the .config manual and started make > again OK, here's one without compiler.h and without .config.old (by the way, I don't understand why make distclean didn't remove it...). Good new, such way the patch is even smaller, so it would be really good to have it included finally into the repo :-) Any objection to the inclusion ? -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre HVR-4000-multiproto_plus-2008-05-02.diff.bz2 Description: Add full HVR-4000 support into multiproto_plus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
Gregoire Favre wrote: > On Fri, May 02, 2008 at 01:15:45PM +0200, Lars Bläser wrote: > >> after this patch the multiproto_plus does not compile against my older >> kernel (suse 10.2 stock kernel 2.6.18) > > Have you replaced linux/include/linux/compiler.h with the one from your > kernel ? (in multiproto_plus dir) if that's going to be included, this > shouldn't be in of course. your patch included the compiler.h, after replacing it with the right one the drivers are build your patch also created a .config.old in v4l and the cx88 modules are not build (the .config created during make does only contain inaktive lines for cx88 modules), i modified the .config manual and started make again ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
On Fri, May 02, 2008 at 01:15:45PM +0200, Lars Bläser wrote: > after this patch the multiproto_plus does not compile against my older > kernel (suse 10.2 stock kernel 2.6.18) Have you replaced linux/include/linux/compiler.h with the one from your kernel ? (in multiproto_plus dir) if that's going to be included, this shouldn't be in of course. -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
Gregoire Favre wrote: > On Fri, May 02, 2008 at 12:03:48AM +0200, gimli wrote: >> Hi, >> >> sorry, took a little bit longer to find time for made the patch. >> This patch is against multiproto_plus + >> HVR-4000-multiproto_plus-2008-04-25.diff. >> With this combination i'm able to tune all HDTV channels on Astra 19.2E. >> My Hardware is a WinTV Nova HD S2. > > With this new patch, there is no change for me, which is fine, because > everything was already working so it don't break anything here :-) > > I attach an all in one patch just to be easier to follow, and as you > wrote it to VDR's ml, I sent a copy there also. > > Steven and Manu : could it be included into multiproto_plus ? after this patch the multiproto_plus does not compile against my older kernel (suse 10.2 stock kernel 2.6.18) ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
On Fri, May 02, 2008 at 12:03:48AM +0200, gimli wrote: > Hi, > > sorry, took a little bit longer to find time for made the patch. > This patch is against multiproto_plus + > HVR-4000-multiproto_plus-2008-04-25.diff. > With this combination i'm able to tune all HDTV channels on Astra 19.2E. > My Hardware is a WinTV Nova HD S2. With this new patch, there is no change for me, which is fine, because everything was already working so it don't break anything here :-) I attach an all in one patch just to be easier to follow, and as you wrote it to VDR's ml, I sent a copy there also. Steven and Manu : could it be included into multiproto_plus ? Thanks you very much, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre HVR-4000-multiproto_plus-2008-05-02.diff.bz2 Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
Hi, sorry, took a little bit longer to find time for made the patch. This patch is against multiproto_plus + HVR-4000-multiproto_plus-2008-04-25.diff. With this combination i'm able to tune all HDTV channels on Astra 19.2E. My Hardware is a WinTV Nova HD S2. cu Edgar (gimli) Hucek > On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote: >> Some postings before i read about multiproto + hvr4000 and tuning >> problems. >> I had that problems myselfe. The problem is the inversion setting in the >> driver. It's a driver bug. At the moment i do not have my modified >> driver >> by hand. Will post it in later today. I did a mixuup between : >> http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html >> and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a >> patch i have done. >> >> c >> >> Edgar (gimli) Hucek > > Oh, nice one, could you correct my update on your work for > multiproto_plus : > http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html > > I must have different hardware because all works just fine here... > > Thanks, > -- > Grégoire FAVRE http://gregoire.favre.googlepages.com > http://www.gnupg.org >http://picasaweb.google.com/Gregoire.Favre > > > HVR-4000-multiproto_plus-2008-04-25_inversion.diff Description: Binary data ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000
> Some postings before i read about multiproto + hvr4000 and tuning problems. > I had that problems myselfe. do you mean my hvr4000-problem with ERROR (dvbdevice.c,302): Invalid argument ?? > The problem is the inversion setting in the > driver. It's a driver bug. At the moment i do not have my modified driver > by hand. Will post it in later today. it will be fine >I did a mixuup between : > http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html > and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a > patch i have done. there's January hvr4000 patch http://www.linuxtv.org/pipermail/linux-dvb/2008-January/023390.html and multifrontend patch http://www.linuxtv.org/pipermail/linux-dvb/2008-January/023416.html may be they will help to you Igor ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
> On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote: >> Some postings before i read about multiproto + hvr4000 and tuning >> problems. >> I had that problems myselfe. The problem is the inversion setting in the >> driver. It's a driver bug. At the moment i do not have my modified >> driver >> by hand. Will post it in later today. I did a mixuup between : >> http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html >> and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a >> patch i have done. >> >> c >> >> Edgar (gimli) Hucek > > Oh, nice one, could you correct my update on your work for > multiproto_plus : > http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html > > I must have different hardware because all works just fine here... I use a WinTV Nova HD S2. As soon i have time i'll check your latest patch and the new multiproto_plus tree. cu Edgar (gimli) Hucek > Thanks, > -- > Grégoire FAVRE http://gregoire.favre.googlepages.com > http://www.gnupg.org >http://picasaweb.google.com/Gregoire.Favre > > > ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] VDR 1.7.0 & multiproto & hvr4000 -> multiproto_plus
On Tue, Apr 29, 2008 at 10:18:30AM +0200, gimli wrote: > Some postings before i read about multiproto + hvr4000 and tuning problems. > I had that problems myselfe. The problem is the inversion setting in the > driver. It's a driver bug. At the moment i do not have my modified driver > by hand. Will post it in later today. I did a mixuup between : > http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html > and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a > patch i have done. > > c > > Edgar (gimli) Hucek Oh, nice one, could you correct my update on your work for multiproto_plus : http://linuxtv.org/pipermail/linux-dvb/2008-April/025655.html I must have different hardware because all works just fine here... Thanks, -- Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org http://picasaweb.google.com/Gregoire.Favre ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] VDR 1.7.0 & multiproto & hvr4000
Some postings before i read about multiproto + hvr4000 and tuning problems. I had that problems myselfe. The problem is the inversion setting in the driver. It's a driver bug. At the moment i do not have my modified driver by hand. Will post it in later today. I did a mixuup between : http://www.linuxtv.org/pipermail/linux-dvb/2008-March/024487.html and http://www.mail-archive.com/[EMAIL PROTECTED]/msg27438.html a patch i have done. c Edgar (gimli) Hucek ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr