[vdr] TechnoTrend T-3000 Hybrid works under VDR?
Hi, Anybody tested DVB-T TechnoTrend T-3000 Hybrid under VDR? I want to order two of this card for VDR installation, and I don't know if it will works well with VDR or not. Sincerely yours. A. Hoseini. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] VDR exit and reboot in missing channels in multi card configuration. why?
Hi all, I've a VDR system with 3 dvb cards. everything works fine when the signal is ok, but if I've a timer on a channel that is not realy exist, or when the BER in one of my receiving channels is high and the channel is not receiving well, vdr thinks that there is a problem with dvb drivers and exits to reload the drivers (or even system reboot if I define it!) and spoils other concurrent recording timers. The point is, why vdr doesn't detects that other channels are recording well, and so there shouldn't be a problem with dvb drivers, and hence it should not exit? is there any way to prohibit vdr from exit, if there is well going recording on the other cards? With the best wishes. Ali. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] VDR exit and reboot in missing channels in multi card configuration. why?
Hi all, I've a VDR system with 3 dvb cards. everything works fine when the signal is ok, but if I've a timer on a channel that is not realy exist, or when the BER in one of my receiving channels is high and the channel is not receiving well, vdr thinks that there is a problem with dvb drivers and exits to reload the drivers (or even system reboot if I define it!) and spoils other concurrent recording timers. The point is, why vdr doesn't detects that other channels are recording well, and so there shouldn't be a problem with dvb drivers, and hence it should not exit? is there any way to prohibit vdr from exit, if there is well going recording on the other cards? With the best wishes. Ali. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] prevernting vdr restart on bad signal?
hi all, I've noticed that when the signal quality goes low ( high BER or high UNC), and if a timer records that channel simultaneously, the vdr exits continuously, and hence produces too many recording files. How should I prevent vdr from exit, in this situations? Thanks. John. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] streamdev hang after short burst noise.
Hi all, I've a vdr box that i use with streamdev plugin. I watch this streams over my windows computer with vlc. But now, there is some random noise that appears in my input signal, causes to streamdev to fail completely. the noise time is so short that vdr works and does not restart, but I should restart it to restart streamdev server. Any clue or solution for this problem. With the best wishes. John. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] streamdev hang after short burst noise.
Hi all, I've a vdr box that i use with streamdev plugin. I watch this streams over my windows computer with vlc. But now, there is some random noise that appears in my input signal, causes to streamdev to fail completely. the noise time is so short that vdr works and does not restart, but I should restart it to restart streamdev server. Any clue or solution for this problem. With the best wishes. J. Anderson. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] dvbstream and vdr streamdev streaming format difference?
Hi all, I'm thinking to write a simple udp clone of vdr streamdev plugin. I tested dvbstream, but the problem is I couldn't play dvbstream streams with videlan, which is only player that I know works with linux and windows and could play streamdev streams. Does anybody know what format streamdev streams, and why videolan could not play dvbstream streams? although dvbstream says it uses rtp over udp protocol, and videolan has an option to play this. John. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] dvb driver failure detection?
Hi all, I'm using a VDR system with 4 skystar2 cards. I'm disabled vdr watchdog and code line who jumps out vdr when the signal is noisy, because when this enabled, and I have noise in one frequency, vdr jumps out and ruins all other input recordings. But there are some times that all recordings fail. I suspect to DVB driver, because VDR records, but file size of recordings are 0, and when I restart system, every things go well again. The question is, how I can detect dvb driver failure, rather than signal failure, to restart system just in driver failure times? Thanks. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] vdr memory leak when record noisy signal.
Hi, I'm using kernel 2.6.20 with vdr-1.4.7 with streamdev plugin. When I'm record even more than 10 simultaneous video timers, the memory consumption is below 400 MBytes. But when any noise appears in the signal, the memory goes up to 1 Gigabyte, the whole system memory, then system starts malfunctioning. Sometimes when I restart vdr, the memory frees, and sometimes I should restart the whole system to free up the memory. Where is the source of this memory leakage? Why the vdr doesn't free up memory when the noise goes out? Thanks. Jikjikman. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] A VDR compatible dvb-s card with CI interface recommendation?
Hi, I Want to buy a new DVB card to watch TV channels with VDR. The important point is I want it to have CI interface, So I could use CAM to view encrypted channels. I knew cards such as NEXUS, but they discontinued long time ago. I also know Technisat SkyStar HD 2, but as I know it is not compatible with VDR. So, Does anybody has recommendation for a card with this conditions? 1: good compatibility with VDR, Linux and good stability. 2: Has CI interface, and CI is supported under Linux and VDR. 3: Be in production. Thanks. A. HMH. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] A VDR compatible dvb-s card with CI interface recommendation?
On Thu, Apr 17, 2008 at 10:34 AM, Halim Sahin <[EMAIL PROTECTED]> wrote: > Hello, > Have you asked google? > > If you want mpeg2 decoder you need a fullfeatured card. > These are discontinued right. > > Budget card with CI interface can you buy from knc one, Technotrend, > hauppauge etc. > Have a look to www.linuxtv.org/wiki > > HTH. > Halim > > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > As I said before, I know some cards, but I don't know which are supported under VDR, especially its CI part. For instance, I don't know if I buy a SkyStar HD 2, would it, and its CI is supported under VDR, because MultiProto should be available for VDR in 1.7.0. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] A VDR compatible dvb-s card with CI interface recommendation?
On Thu, Apr 17, 2008 at 7:35 PM, Lars Bläser <[EMAIL PROTECTED]> wrote: > > As I said before, I know some cards, but I don't know which are > supported > > under VDR, especially its CI part. For instance, I don't know if I buy a > > SkyStar HD 2, would it, and its CI is supported under VDR, because > > MultiProto should be available for VDR in 1.7.0. > > > http://www.linuxtv.org/wiki/index.php/DVB-S2_PCI_Cards > > for the Sky Star HD 2 (same as Azurewave AD SP400 CI) > > Common Interface support: > Still none. > > may be the TechnoTrend TT-budget S2-3200 is more usefull > > ___ > vdr mailing list > vdr@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr > I don't want the card to be DVB-S2, I just need a card with CI support which works under linux and VDR and I can buy it! ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] peculiar EPG problem.
Hi, I faced a very peculiar EPG problem. I'm using VDR with DVB-T usb sticks in IRAN. The EPG language is Farsi (Persian). The problem is, from 32 alphabets of Farsi, more than 18 of them are shown correct in EPG and epg.data file, but remaining characters are shown as ? or !. most of this wrong alphabets belong to the end of alphabets order in Farsi. I'm sure encoding is UTF-8, because I could guess complete sentence with correct characters. Any ideas? Best regards. A. Hosseini. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
